Skip to content

L
linux
Commit a8c4b90e authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC platform updates (part 2) from Arnd Bergmann:
 "These patches are all for Renesas shmobile, and depend on the earlier
  pinctrl updates.  Remarkably, this adds support for three new SoCs:
  r8a73a4, r8a73a4 and r8a7778.  The bulk of the code added for these is
  for pinctrl (using the new subsystem) and for clocks (not yet using
  the common clock subsystem).  The latter will have to get converted in
  one of the upcoming releases, but shmobile is not ready for that yet.

  The series also contains Renesas shmobile board changes, adding one
  board file for each of the three new SoCs.  These boards are using a
  mix of classic and device-tree based probing, as there is still a lot
  of infrastructure in shmobile that has not been converted to DT yet.
  Once those are resolved to the degree that no board specific setup
  code is needed, they can get folded into the respective SoC setup files."

* tag 'soc-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits)
  ARM: shmobile: use r8a7790 timer setup code on Lager
  ARM: shmobile: force enable of r8a7790 arch timer
  ARM: shmobile: Add second I/O range for r8a7790 PFC
  ARM: shmobile: bockw: enable network settings on bootargs
  ARM: shmobile: bockw: add SMSC ethernet support
  ARM: shmobile: R8A7778: add Ether support
  ARM: shmobile: bockw: enable SMSC ethernet on defconfig
  ARM: shmobile: r8a7778: add r8a7778_init_irq_extpin()
  ARM: shmobile: r8a7778: remove pointless PLATFORM_INFO()
  ARM: shmobile: mackerel: clean up MMCIF vs. SDHI1 selection
  ARM: shmobile: mackerel: add interrupt names for SDHI0
  ARM: shmobile: mackerel: switch SDHI and MMCIF interfaces to slot-gpio
  ARM: shmobile: mackerel: remove OCR masks, where regulators are used
  ARM: shmobile: mackerel: SDHI resources do not have to be numbered
  ARM: shmobile: Initial r8a7790 Lager board support
  ARM: shmobile: APE6EVM LAN9220 support
  ARM: shmobile: APE6EVM PFC support
  ARM: shmobile: APE6EVM base support
  ARM: shmobile: kzm9g-reference: add ethernet support
  ARM: shmobile: add R-Car M1A Bock-W platform support
  ...
parents eac84105 9251c6c0
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5588 additions and 1828 deletions
arch/arm/Kconfig
View file @ a8c4b90e
......@@ -643,7 +643,7 @@ config ARCH_SHMOBILE
select MULTI_IRQ_HANDLER
select NEED_MACH_MEMORY_H
select NO_IOPORT
select PINCTRL
select PINCTRL if ARCH_WANT_OPTIONAL_GPIOLIB
select PM_GENERIC_DOMAINS if PM
select SPARSE_IRQ
help
......
arch/arm/boot/dts/Makefile
View file @ a8c4b90e
......@@ -155,9 +155,12 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
ccu9540.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen-reference.dtb \
r8a7790-lager.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
sh7372-mackerel.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
......
arch/arm/boot/dts/r8a73a4-ape6evm.dts 0 → 100644
View file @ a8c4b90e
/*
* Device Tree Source for the APE6EVM board
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a73a4.dtsi"
/ {
model = "APE6EVM";
compatible = "renesas,ape6evm", "renesas,r8a73a4";
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x40000000>;
};
ape6evm_fixed_3v3: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
ethernet@8000000 {
compatible = "smsc,lan9118", "smsc,lan9115";
reg = <0x08000000 0x1000>;
interrupt-parent = <&irqc1>;
interrupts = <8 0x4>;
phy-mode = "mii";
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
vdd33a-supply = <&ape6evm_fixed_3v3>;
vddvario-supply = <&ape6evm_fixed_3v3>;
};
};
};
arch/arm/boot/dts/r8a73a4.dtsi 0 → 100644
View file @ a8c4b90e
/*
* Device Tree Source for the r8a73a4 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r8a73a4";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
};
};
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
gic-cpuif@4 {
compatible = "arm,gic-cpuif";
cpuif-id = <4>;
cpu = <&cpu0>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>,
<0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>,
<0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>,
<0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>,
<0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>,
<0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>,
<0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>,
<0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>;
};
irqc1: interrupt-controller@e61c0200 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0200 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>,
<0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>,
<0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>,
<0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>,
<0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>,
<0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>,
<0 56 4>, <0 57 4>;
};
thermal@e61f0000 {
compatible = "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
<0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>;
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
};
arch/arm/boot/dts/r8a7778-bockw.dts 0 → 100644
View file @ a8c4b90e
/*
* Reference Device Tree Source for the Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a7778.dtsi"
/ {
model = "bockw";
compatible = "renesas,bockw", "renesas,r8a7778";
chosen {
bootargs = "console=ttySC0,115200 ignore_loglevel ip=dhcp root=/dev/nfs";
};
memory {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
};
arch/arm/boot/dts/r8a7778.dtsi 0 → 100644
View file @ a8c4b90e
/*
* Device Tree Source for Renesas r8a7778
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "renesas,r8a7778";
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
};
};
gic: interrupt-controller@fe438000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
reg = <0xfe438000 0x1000>,
<0xfe430000 0x100>;
};
};
arch/arm/boot/dts/r8a7790-lager.dts 0 → 100644
View file @ a8c4b90e
/*
* Device Tree Source for the Lager board
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a7790.dtsi"
/ {
model = "Lager";
compatible = "renesas,lager", "renesas,r8a7790";
chosen {
bootargs = "console=ttySC6,115200 ignore_loglevel";
};
memory@40000000 {
device_type = "memory";
reg = <0 0x40000000 0 0x80000000>;
};
lbsc {
#address-cells = <1>;
#size-cells = <1>;
};
};
arch/arm/boot/dts/r8a7790.dtsi 0 → 100644
View file @ a8c4b90e
/*
* Device Tree Source for the r8a7790 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r8a7790";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1300000000>;
};
};
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
gic-cpuif@4 {
compatible = "arm,gic-cpuif";
cpuif-id = <4>;
cpu = <&cpu0>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0 0xe61c0000 0 0x200>;
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
};
arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
View file @ a8c4b90e
......@@ -44,6 +44,19 @@ reg_3p3v: regulator@1 {
regulator-always-on;
regulator-boot-on;
};
lan9220@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqpin0>;
interrupts = <3 0>; /* active low */
reg-io-width = <4>;
smsc,irq-push-pull;
smsc,save-mac-address;
vddvario-supply = <&reg_1p8v>;
vdd33a-supply = <&reg_3p3v>;
};
};
&mmcif {
......
arch/arm/boot/dts/sh73a0.dtsi
View file @ a8c4b90e
......@@ -38,6 +38,87 @@ gic: interrupt-controller@f0001000 {
<0xf0000100 0x100>;
};
irqpin0: irqpin@e6900000 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900000 4>,
<0xe6900010 4>,
<0xe6900020 1>,
<0xe6900040 1>,
<0xe6900060 1>;
interrupt-parent = <&gic>;
interrupts = <0 1 0x4
0 2 0x4
0 3 0x4
0 4 0x4
0 5 0x4
0 6 0x4
0 7 0x4
0 8 0x4>;
};
irqpin1: irqpin@e6900004 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900004 4>,
<0xe6900014 4>,
<0xe6900024 1>,
<0xe6900044 1>,
<0xe6900064 1>;
interrupt-parent = <&gic>;
interrupts = <0 9 0x4
0 10 0x4
0 11 0x4
0 12 0x4
0 13 0x4
0 14 0x4
0 15 0x4
0 16 0x4>;
control-parent;
};
irqpin2: irqpin@e6900008 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe6900008 4>,
<0xe6900018 4>,
<0xe6900028 1>,
<0xe6900048 1>,
<0xe6900068 1>;
interrupt-parent = <&gic>;
interrupts = <0 17 0x4
0 18 0x4
0 19 0x4
0 20 0x4
0 21 0x4
0 22 0x4
0 23 0x4
0 24 0x4>;
};
irqpin3: irqpin@e690000c {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
interrupt-controller;
reg = <0xe690000c 4>,
<0xe690001c 4>,
<0xe690002c 1>,
<0xe690004c 1>,
<0xe690006c 1>;
interrupt-parent = <&gic>;
interrupts = <0 25 0x4
0 26 0x4
0 27 0x4
0 28 0x4
0 29 0x4
0 30 0x4
0 31 0x4
0 32 0x4>;
};
i2c0: i2c@0xe6820000 {
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/configs/bockw_defconfig 0 → 100644
View file @ a8c4b90e
# CONFIG_ARM_PATCH_PHYS_VIRT is not set
CONFIG_KERNEL_LZMA=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A7778=y
CONFIG_MACH_BOCKW=y
CONFIG_MEMORY_START=0x60000000
CONFIG_MEMORY_SIZE=0x10000000
CONFIG_SHMOBILE_TIMER_HZ=1024
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp"
CONFIG_CMDLINE_FORCE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=6
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_UIO=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_SWAP=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
CONFIG_AVERAGE=y
arch/arm/mach-shmobile/Kconfig
View file @ a8c4b90e
......@@ -18,11 +18,28 @@ config ARCH_SH73A0
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
config ARCH_R8A7778
bool "R-Car M1 (R8A77780)"
select CPU_V7
select SH_CLK_CPG
select ARM_GIC
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
......@@ -34,6 +51,15 @@ config ARCH_R8A7779
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_GIC
select CPU_V7
select ARM_ARCH_TIMER
select SH_CLK_CPG
select RENESAS_IRQC
config ARCH_EMEV2
bool "Emma Mobile EV2"
select ARCH_WANT_OPTIONAL_GPIOLIB
......@@ -70,6 +96,11 @@ config MACH_AG5EVM
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
config MACH_APE6EVM
bool "APE6EVM board"
depends on ARCH_R8A73A4
select USE_OF
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
......@@ -98,6 +129,13 @@ config MACH_ARMADILLO800EVA
select SND_SOC_WM8978 if SND_SIMPLE_CARD
select USE_OF
config MACH_BOCKW
bool "BOCK-W platform"
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select RENESAS_INTC_IRQPIN
select USE_OF
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
......@@ -117,6 +155,11 @@ config MACH_MARZEN_REFERENCE
This is intended to aid developers
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select USE_OF
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
......@@ -157,7 +200,8 @@ config MEMORY_START
hex "Physical memory start address"
default "0x40000000" if MACH_AP4EVB || MACH_AG5EVM || \
MACH_MACKEREL || MACH_BONITO || \
MACH_ARMADILLO800EVA
MACH_ARMADILLO800EVA || MACH_APE6EVM || \
MACH_LAGER
default "0x41000000" if MACH_KOTA2
default "0x00000000"
---help---
......@@ -167,6 +211,8 @@ config MEMORY_START
config MEMORY_SIZE
hex "Physical memory size"
default "0x80000000" if MACH_LAGER
default "0x40000000" if MACH_APE6EVM
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
default "0x1e000000" if MACH_KOTA2
......
arch/arm/mach-shmobile/Makefile
View file @ a8c4b90e
......@@ -8,8 +8,11 @@ obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
# SMP objects
......@@ -34,11 +37,14 @@ obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
# Board objects
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
obj-$(CONFIG_MACH_KOTA2) += board-kota2.o
obj-$(CONFIG_MACH_BONITO) += board-bonito.o
obj-$(CONFIG_MACH_BOCKW) += board-bockw.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_MARZEN_REFERENCE) += board-marzen-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
......
arch/arm/mach-shmobile/board-ape6evm.c 0 → 100644
View file @ a8c4b90e
/*
* APE6EVM board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/smsc911x.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
REGULATOR_SUPPLY("vdd33a", "smsc911x"),
};
/* SMSC LAN9220 */
static const struct resource lan9220_res[] = {
DEFINE_RES_MEM(0x08000000, 0x1000),
{
.start = irq_pin(40), /* IRQ40 */
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
},
};
static const struct smsc911x_platform_config lan9220_data = {
.flags = SMSC911X_USE_32BIT,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
};
static const struct pinctrl_map ape6evm_pinctrl_map[] = {
/* SCIFA0 console */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
"scifa0_data", "scifa0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
"irqc_irq40", "irqc"),
};
static void __init ape6evm_add_standard_devices(void)
{
r8a73a4_clock_init();
pinctrl_register_mappings(ape6evm_pinctrl_map,
ARRAY_SIZE(ape6evm_pinctrl_map));
r8a73a4_pinmux_init();
r8a73a4_add_standard_devices();
/* LAN9220 ethernet */
gpio_request_one(270, GPIOF_OUT_INIT_HIGH, NULL); /* smsc9220 RESET */
regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
platform_device_register_resndata(&platform_bus, "smsc911x", -1,
lan9220_res, ARRAY_SIZE(lan9220_res),
&lan9220_data, sizeof(lan9220_data));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
"renesas,ape6evm",
NULL,
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
.init_irq = irqchip_init,
.init_time = shmobile_timer_init,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-armadillo800eva.c
View file @ a8c4b90e
......@@ -149,7 +149,7 @@
* see
* usbhsf_power_ctrl()
*/
#define IRQ7 evt2irq(0x02e0)
#define IRQ7 irq_pin(7)
#define USBCR1 IOMEM(0xe605810a)
#define USBH 0xC6700000
#define USBH_USBCTR 0x10834
......@@ -338,7 +338,7 @@ static struct resource usbhsf_resources[] = {
.flags = IORESOURCE_MEM,
},
{
.start = evt2irq(0x0A20),
.start = gic_spi(51),
.flags = IORESOURCE_IRQ,
},
};
......@@ -371,7 +371,7 @@ static struct resource sh_eth_resources[] = {
.end = 0xe9a02000 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = evt2irq(0x0500),
.start = gic_spi(110),
.flags = IORESOURCE_IRQ,
},
};
......@@ -425,7 +425,7 @@ static struct resource lcdc0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x580),
.start = gic_spi(177),
.flags = IORESOURCE_IRQ,
},
};
......@@ -460,7 +460,7 @@ static struct resource hdmi_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x1700),
.start = gic_spi(131),
.flags = IORESOURCE_IRQ,
},
[2] = {
......@@ -522,7 +522,7 @@ static struct resource hdmi_lcdc_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x1780),
.start = gic_spi(178),
.flags = IORESOURCE_IRQ,
},
};
......@@ -686,7 +686,7 @@ static struct platform_device vcc_sdhi1 = {
* We can use IRQ31 as card detect irq,
* but it needs chattering removal operation
*/
#define IRQ31 evt2irq(0x33E0)
#define IRQ31 irq_pin(31)
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
......@@ -708,12 +708,12 @@ static struct resource sdhi0_resources[] = {
*/
{
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x0E20),
.start = gic_spi(118),
.flags = IORESOURCE_IRQ,
},
{
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x0E40),
.start = gic_spi(119),
.flags = IORESOURCE_IRQ,
},
};
......@@ -747,15 +747,15 @@ static struct resource sdhi1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x0E80),
.start = gic_spi(121),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = evt2irq(0x0EA0),
.start = gic_spi(122),
.flags = IORESOURCE_IRQ,
},
[3] = {
.start = evt2irq(0x0EC0),
.start = gic_spi(123),
.flags = IORESOURCE_IRQ,
},
};
......@@ -798,12 +798,12 @@ static struct resource sh_mmcif_resources[] = {
},
[1] = {
/* MMC ERR */
.start = evt2irq(0x1AC0),
.start = gic_spi(56),
.flags = IORESOURCE_IRQ,
},
[2] = {
/* MMC NOR */
.start = evt2irq(0x1AE0),
.start = gic_spi(57),
.flags = IORESOURCE_IRQ,
},
};
......@@ -880,7 +880,7 @@ static struct resource ceu0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x0500),
.start = gic_spi(160),
.flags = IORESOURCE_IRQ,
},
[2] = {
......@@ -922,7 +922,7 @@ static struct resource fsi_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x1840),
.start = gic_spi(9),
.flags = IORESOURCE_IRQ,
},
};
......@@ -1009,7 +1009,7 @@ static struct st1232_pdata st1232_i2c0_pdata = {
static struct i2c_board_info i2c0_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
.irq = evt2irq(0x0340),
.irq = irq_pin(10),
.platform_data = &st1232_i2c0_pdata,
},
{
......@@ -1292,7 +1292,6 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
.map_io = r8a7740_map_io,
.init_early = eva_add_early_devices,
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
.init_late = shmobile_init_late,
.init_time = eva_earlytimer_init,
......
arch/arm/mach-shmobile/board-bockw.c 0 → 100644
View file @ a8c4b90e
/*
* Bock-W board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7778.h>
#include <asm/mach/arch.h>
static struct smsc911x_platform_config smsc911x_data = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
};
static struct resource smsc911x_resources[] = {
DEFINE_RES_MEM(0x18300000, 0x1000),
DEFINE_RES_IRQ(irq_pin(0)), /* IRQ 0 */
};
#define IRQ0MR 0x30
static void __init bockw_init(void)
{
void __iomem *fpga;
r8a7778_clock_init();
r8a7778_init_irq_extpin(1);
r8a7778_add_standard_devices();
fpga = ioremap_nocache(0x18200000, SZ_1M);
if (fpga) {
/*
* CAUTION
*
* IRQ0/1 is cascaded interrupt from FPGA.
* it should be cared in the future
* Now, it is assuming IRQ0 was used only from SMSC.
*/
u16 val = ioread16(fpga + IRQ0MR);
val &= ~(1 << 4); /* enable SMSC911x */
iowrite16(val, fpga + IRQ0MR);
iounmap(fpga);
platform_device_register_resndata(
&platform_bus, "smsc911x", -1,
smsc911x_resources, ARRAY_SIZE(smsc911x_resources),
&smsc911x_data, sizeof(smsc911x_data));
}
}
static const char *bockw_boards_compat_dt[] __initdata = {
"renesas,bockw",
NULL,
};
DT_MACHINE_START(BOCKW_DT, "bockw")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = bockw_init,
.init_time = shmobile_timer_init,
.dt_compat = bockw_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-lager.c 0 → 100644
View file @ a8c4b90e
/*
* Lager board support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/common.h>
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static void __init lager_add_standard_devices(void)
{
r8a7790_clock_init();
r8a7790_add_standard_devices();
}
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
NULL,
};
DT_MACHINE_START(LAGER_DT, "lager")
.init_irq = irqchip_init,
.init_time = r8a7790_timer_init,
.init_machine = lager_add_standard_devices,
.dt_compat = lager_boards_compat_dt,
MACHINE_END
arch/arm/mach-shmobile/board-mackerel.c
View file @ a8c4b90e
......@@ -969,15 +969,6 @@ static struct platform_device nand_flash_device = {
},
};
/*
* The card detect pin of the top SD/MMC slot (CN7) is active low and is
* connected to GPIO A22 of SH7372 (GPIO 41).
*/
static int slot_cn7_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(41);
}
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
......@@ -988,21 +979,17 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
};
static struct resource sdhi0_resources[] = {
[0] = {
{
.name = "SDHI0",
.start = 0xe6850000,
.end = 0xe68500ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
.flags = IORESOURCE_IRQ,
},
[2] = {
}, {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
.flags = IORESOURCE_IRQ,
},
[3] = {
}, {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
.flags = IORESOURCE_IRQ,
},
......@@ -1018,36 +1005,30 @@ static struct platform_device sdhi0_device = {
},
};
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
/* SDHI1 */
/* GPIO 41 can trigger IRQ8, but it is used by USBHS1, we have to poll */
static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
.tmio_ocr_mask = MMC_VDD_165_195,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
.cd_gpio = 41,
};
static struct resource sdhi1_resources[] = {
[0] = {
{
.name = "SDHI1",
.start = 0xe6860000,
.end = 0xe68600ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
.flags = IORESOURCE_IRQ,
},
[2] = {
}, {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
.flags = IORESOURCE_IRQ,
},
[3] = {
}, {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
.flags = IORESOURCE_IRQ,
......@@ -1065,43 +1046,32 @@ static struct platform_device sdhi1_device = {
};
#endif
/* SDHI2 */
/*
* The card detect pin of the top SD/MMC slot (CN23) is active low and is
* connected to GPIO SCIFB_SCK of SH7372 (162).
* connected to GPIO SCIFB_SCK of SH7372 (GPIO 162).
*/
static int slot_cn23_get_cd(struct platform_device *pdev)
{
return !gpio_get_value(162);
}
/* SDHI2 */
static struct sh_mobile_sdhi_info sdhi2_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn23_get_cd,
.cd_gpio = 162,
};
static struct resource sdhi2_resources[] = {
[0] = {
{
.name = "SDHI2",
.start = 0xe6870000,
.end = 0xe68700ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
.start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
.flags = IORESOURCE_IRQ,
},
[2] = {
}, {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
.flags = IORESOURCE_IRQ,
},
[3] = {
}, {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
.flags = IORESOURCE_IRQ,
......@@ -1119,6 +1089,7 @@ static struct platform_device sdhi2_device = {
};
/* SH_MMCIF */
#if IS_ENABLED(CONFIG_MMC_SH_MMCIF)
static struct resource sh_mmcif_resources[] = {
[0] = {
.name = "MMCIF",
......@@ -1140,16 +1111,17 @@ static struct resource sh_mmcif_resources[] = {
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
.ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
.get_cd = slot_cn7_get_cd,
.use_cd_gpio = true,
/* card detect pin for SD/MMC slot (CN7) */
.cd_gpio = 41,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct platform_device sh_mmcif_device __maybe_unused = {
static struct platform_device sh_mmcif_device = {
.name = "sh_mmcif",
.id = 0,
.dev = {
......@@ -1160,7 +1132,7 @@ static struct platform_device sh_mmcif_device __maybe_unused = {
.num_resources = ARRAY_SIZE(sh_mmcif_resources),
.resource = sh_mmcif_resources,
};
#endif
static int mackerel_camera_add(struct soc_camera_device *icd);
static void mackerel_camera_del(struct soc_camera_device *icd);
......@@ -1267,11 +1239,12 @@ static struct platform_device *mackerel_devices[] __initdata = {
&fsi_hdmi_device,
&nand_flash_device,
&sdhi0_device,
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
&sdhi1_device,
#else
&sh_mmcif_device,
#endif
&sdhi2_device,
&sh_mmcif_device,
&ceu_device,
&mackerel_camera,
&hdmi_device,
......@@ -1336,11 +1309,6 @@ static struct i2c_board_info i2c1_devices[] = {
};
static const struct pinctrl_map mackerel_pinctrl_map[] = {
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_ctrl_0", "mmc0"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_data4", "sdhi0"),
......@@ -1349,11 +1317,17 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372",
"sdhi0_wp", "sdhi0"),
/* SDHI1 */
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372",
"sdhi1_ctrl", "sdhi1"),
#else
/* MMCIF */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_data8_0", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh7372",
"mmc0_ctrl_0", "mmc0"),
#endif
/* SDHI2 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-sh7372",
......@@ -1378,10 +1352,11 @@ static void __init mackerel_init(void)
{ "A3SP", &usbhs0_device, },
{ "A3SP", &usbhs1_device, },
{ "A3SP", &nand_flash_device, },
{ "A3SP", &sh_mmcif_device, },
{ "A3SP", &sdhi0_device, },
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
#if !IS_ENABLED(CONFIG_MMC_SH_MMCIF)
{ "A3SP", &sdhi1_device, },
#else
{ "A3SP", &sh_mmcif_device, },
#endif
{ "A3SP", &sdhi2_device, },
{ "A4R", &ceu_device, },
......@@ -1492,12 +1467,6 @@ static void __init mackerel_init(void)
/* SDHI0 PORT172 card-detect IRQ26 */
gpio_request(GPIO_FN_IRQ26_172, NULL);
/* card detect pin for MMC slot (CN7) */
gpio_request_one(41, GPIOF_IN, NULL);
/* card detect pin for microSD slot (CN23) */
gpio_request_one(162, GPIOF_IN, NULL);
/* FLCTL */
gpio_request(GPIO_FN_D0_NAF0, NULL);
gpio_request(GPIO_FN_D1_NAF1, NULL);
......
arch/arm/mach-shmobile/board-marzen.c
View file @ a8c4b90e
......@@ -25,6 +25,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/dma-mapping.h>
#include <linux/pinctrl/machine.h>
#include <linux/regulator/fixed.h>
......@@ -168,12 +169,43 @@ static struct platform_device usb_phy_device = {
.num_resources = ARRAY_SIZE(usb_phy_resources),
};
/* LEDS */
static struct gpio_led marzen_leds[] = {
{
.name = "led2",
.gpio = 157,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led3",
.gpio = 158,
.default_state = LEDS_GPIO_DEFSTATE_ON,
}, {
.name = "led4",
.gpio = 159,
.default_state = LEDS_GPIO_DEFSTATE_ON,
},
};
static struct gpio_led_platform_data marzen_leds_pdata = {
.leds = marzen_leds,
.num_leds = ARRAY_SIZE(marzen_leds),
};
static struct platform_device leds_device = {
.name = "leds-gpio",
.id = 0,
.dev = {
.platform_data = &marzen_leds_pdata,
},
};
static struct platform_device *marzen_devices[] __initdata = {
&eth_device,
&sdhi0_device,
&thermal_device,
&hspi_device,
&usb_phy_device,
&leds_device,
};
/* USB */
......
arch/arm/mach-shmobile/clock-r8a73a4.c 0 → 100644
View file @ a8c4b90e
/*
* r8a73a4 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x270
#define MPCKCR 0xe6150080
#define SMSTPCR2 0xe6150138
#define SMSTPCR5 0xe6150144
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
.len = CPG_LEN,
};
static struct clk extalr_clk = {
.rate = 32768,
.mapping = &cpg_mapping,
};
static struct clk extal1_clk = {
.rate = 26000000,
.mapping = &cpg_mapping,
};
static struct clk extal2_clk = {
.rate = 48000000,
.mapping = &cpg_mapping,
};
static struct clk *main_clks[] = {
&extalr_clk,
&extal1_clk,
&extal2_clk,
};
enum {
MSTP217, MSTP216, MSTP207, MSTP206, MSTP204, MSTP203,
MSTP522,
MSTP_NR
};
static struct clk mstp_clks[MSTP_NR] = {
[MSTP204] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP206] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
[MSTP207] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP216] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP217] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR2, 17, 0), /* SCIFB3 */
[MSTP522] = SH_CLK_MSTP32(&extal2_clk, SMSTPCR5, 22, 0), /* Thermal */
};
static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP217]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
/* for DT */
CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
};
void __init r8a73a4_clock_init(void)
{
void __iomem *cpg_base, *reg;
int k, ret = 0;
/* fix MPCLK to EXTAL2 for now.
* this is needed until more detailed clock topology is supported
*/
cpg_base = ioremap_nocache(CPG_BASE, CPG_LEN);
BUG_ON(!cpg_base);
reg = cpg_base + (MPCKCR - CPG_BASE);
iowrite32(ioread32(reg) | 1 << 7 | 0x0c, reg); /* set CKSEL */
iounmap(cpg_base);
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a73a4 clocks\n");
}
arch/arm/mach-shmobile/clock-r8a7740.c
View file @ a8c4b90e
......@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/r8a7740.h>
......@@ -97,42 +98,13 @@ static struct clk dv_clk = {
.rate = 27000000,
};
static unsigned long div_recalc(struct clk *clk)
{
return clk->parent->rate / (int)(clk->priv);
}
static struct sh_clk_ops div_clk_ops = {
.recalc = div_recalc,
};
/* extal1 / 2 */
static struct clk extal1_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &extal1_clk,
};
/* extal1 / 1024 */
static struct clk extal1_div1024_clk = {
.ops = &div_clk_ops,
.priv = (void *)1024,
.parent = &extal1_clk,
};
/* extal1 / 2 / 1024 */
static struct clk extal1_div2048_clk = {
.ops = &div_clk_ops,
.priv = (void *)1024,
.parent = &extal1_div2_clk,
};
SH_CLK_RATIO(div2, 1, 2);
SH_CLK_RATIO(div1k, 1, 1024);
/* extal2 / 2 */
static struct clk extal2_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &extal2_clk,
};
SH_FIXED_RATIO_CLK(extal1_div2_clk, extal1_clk, div2);
SH_FIXED_RATIO_CLK(extal1_div1024_clk, extal1_clk, div1k);
SH_FIXED_RATIO_CLK(extal1_div2048_clk, extal1_div2_clk, div1k);
SH_FIXED_RATIO_CLK(extal2_div2_clk, extal2_clk, div2);
static struct sh_clk_ops followparent_clk_ops = {
.recalc = followparent_recalc,
......@@ -143,11 +115,7 @@ static struct clk system_clk = {
.ops = &followparent_clk_ops,
};
static struct clk system_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &system_clk,
};
SH_FIXED_RATIO_CLK(system_div2_clk, system_clk, div2);
/* r_clk */
static struct clk r_clk = {
......@@ -184,11 +152,7 @@ static struct clk pllc1_clk = {
};
/* PLLC1 / 2 */
static struct clk pllc1_div2_clk = {
.ops = &div_clk_ops,
.priv = (void *)2,
.parent = &pllc1_clk,
};
SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
/* USB clock */
/*
......@@ -323,6 +287,7 @@ struct clk *main_clks[] = {
&fsibck_clk,
};
/* DIV4 clocks */
static void div4_kick(struct clk *clk)
{
unsigned long value;
......@@ -346,6 +311,26 @@ static struct clk_div4_table div4_table = {
.kick = div4_kick,
};
enum {
DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
DIV4_NR
};
struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
[DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
[DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
[DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
[DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
[DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
[DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
};
/* DIV6 reparent */
enum {
DIV6_HDMI,
......@@ -391,6 +376,16 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
fsib_parents, ARRAY_SIZE(fsib_parents), 6, 2),
};
/* DIV6 clocks */
enum {
DIV6_SUB,
DIV6_NR
};
static struct clk div6_clks[DIV6_NR] = {
[DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
};
/* HDMI1/2 clock */
static unsigned long hdmi12_recalc(struct clk *clk)
{
......@@ -455,35 +450,6 @@ static struct clk fsidivs[] = {
};
/* MSTP */
enum {
DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
DIV4_HPP, DIV4_USBP, DIV4_S, DIV4_ZB, DIV4_M3, DIV4_CP,
DIV4_NR
};
struct clk div4_clks[DIV4_NR] = {
[DIV4_I] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 20, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_ZG] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 16, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_B] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = SH_CLK_DIV4(&pllc1_clk, FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_HP] = SH_CLK_DIV4(&pllc1_clk, FRQCRB, 4, 0x6fff, 0),
[DIV4_HPP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 20, 0x6fff, 0),
[DIV4_USBP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 16, 0x6fff, 0),
[DIV4_S] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 12, 0x6fff, 0),
[DIV4_ZB] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 8, 0x6fff, 0),
[DIV4_M3] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 4, 0x6fff, 0),
[DIV4_CP] = SH_CLK_DIV4(&pllc1_clk, FRQCRC, 0, 0x6fff, 0),
};
enum {
DIV6_SUB,
DIV6_NR
};
static struct clk div6_clks[DIV6_NR] = {
[DIV6_SUB] = SH_CLK_DIV6(&pllc1_div2_clk, SUBCKCR, 0),
};
enum {
MSTP128, MSTP127, MSTP125,
MSTP116, MSTP111, MSTP100, MSTP117,
......
arch/arm/mach-shmobile/clock-r8a7778.c 0 → 100644
View file @ a8c4b90e
/*
* r8a7778 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* based on r8a7779
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
#define MSTPCR3 IOMEM(0xffc8003c)
#define MSTPSR1 IOMEM(0xffc80044)
#define MSTPSR4 IOMEM(0xffc80048)
#define MSTPSR6 IOMEM(0xffc8004c)
#define MSTPCR4 IOMEM(0xffc80050)
#define MSTPCR5 IOMEM(0xffc80054)
#define MSTPCR6 IOMEM(0xffc80058)
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
static struct clk_mapping cpg_mapping = {
.phys = 0xffc80000,
.len = 0x80,
};
static struct clk clkp = {
.rate = 62500000, /* FIXME: shortcut */
.flags = CLK_ENABLE_ON_INIT,
.mapping = &cpg_mapping,
};
static struct clk *main_clks[] = {
&clkp,
};
enum {
MSTP114,
MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
MSTP016, MSTP015,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP114] = SH_CLK_MSTP32(&clkp, MSTPCR1, 14, 0), /* Ether */
[MSTP026] = SH_CLK_MSTP32(&clkp, MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&clkp, MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&clkp, MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&clkp, MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&clkp, MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&clkp, MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&clkp, MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&clkp, MSTPCR0, 15, 0), /* TMU1 */
};
static struct clk_lookup lookups[] = {
/* MSTP32 clocks */
CLKDEV_DEV_ID("sh-eth", &mstp_clks[MSTP114]), /* Ether */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP026]), /* SCIF0 */
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP025]), /* SCIF1 */
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP024]), /* SCIF2 */
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP023]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP022]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP021]), /* SCIF6 */
CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP015]), /* TMU01 */
};
void __init r8a7778_clock_init(void)
{
int k, ret = 0;
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a7778 clocks\n");
}
arch/arm/mach-shmobile/clock-r8a7779.c
View file @ a8c4b90e
......@@ -17,13 +17,17 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
#define MD(nr) BIT(nr)
#define FRQMR IOMEM(0xffc80014)
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
......@@ -36,6 +40,9 @@
#define MSTPCR6 IOMEM(0xffc80058)
#define MSTPCR7 IOMEM(0xffc80040)
#define MODEMR 0xffcc0020
/* ioremap() through clock mapping mandatory to avoid
* collision with ARM coherent DMA virtual memory range.
*/
......@@ -50,40 +57,39 @@ static struct clk_mapping cpg_mapping = {
* from the platform code.
*/
static struct clk plla_clk = {
.rate = 1500000000,
/* .rate will be updated on r8a7779_clock_init() */
.mapping = &cpg_mapping,
};
/*
* clock ratio of these clock will be updated
* on r8a7779_clock_init()
*/
SH_FIXED_RATIO_CLK_SET(clkz_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkzs_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clki_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks1_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks3_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clks4_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkb_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkout_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkp_clk, plla_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(clkg_clk, plla_clk, 1, 1);
static struct clk *main_clks[] = {
&plla_clk,
};
static int divisors[] = { 0, 0, 0, 6, 8, 12, 16, 0, 24, 32, 36, 0, 0, 0, 0, 0 };
static struct clk_div_mult_table div4_div_mult_table = {
.divisors = divisors,
.nr_divisors = ARRAY_SIZE(divisors),
};
static struct clk_div4_table div4_table = {
.div_mult_table = &div4_div_mult_table,
};
enum { DIV4_S, DIV4_OUT, DIV4_S4, DIV4_S3, DIV4_S1, DIV4_P, DIV4_NR };
static struct clk div4_clks[DIV4_NR] = {
[DIV4_S] = SH_CLK_DIV4(&plla_clk, FRQMR, 20,
0x0018, CLK_ENABLE_ON_INIT),
[DIV4_OUT] = SH_CLK_DIV4(&plla_clk, FRQMR, 16,
0x0700, CLK_ENABLE_ON_INIT),
[DIV4_S4] = SH_CLK_DIV4(&plla_clk, FRQMR, 12,
0x0040, CLK_ENABLE_ON_INIT),
[DIV4_S3] = SH_CLK_DIV4(&plla_clk, FRQMR, 8,
0x0010, CLK_ENABLE_ON_INIT),
[DIV4_S1] = SH_CLK_DIV4(&plla_clk, FRQMR, 4,
0x0060, CLK_ENABLE_ON_INIT),
[DIV4_P] = SH_CLK_DIV4(&plla_clk, FRQMR, 0,
0x0300, CLK_ENABLE_ON_INIT),
&clkz_clk,
&clkzs_clk,
&clki_clk,
&clks_clk,
&clks1_clk,
&clks3_clk,
&clks4_clk,
&clkb_clk,
&clkout_clk,
&clkp_clk,
&clkg_clk,
};
enum { MSTP323, MSTP322, MSTP321, MSTP320,
......@@ -96,52 +102,28 @@ enum { MSTP323, MSTP322, MSTP321, MSTP320,
MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP323] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
[MSTP115] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 15, 0), /* SATA */
[MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR1, 3, 0), /* DU */
[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 1, 0), /* USB2 */
[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 0, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0), /* I2C3 */
[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 15, 0), /* TMU1 */
[MSTP014] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 14, 0), /* TMU2 */
[MSTP007] = SH_CLK_MSTP32(&div4_clks[DIV4_S], MSTPCR0, 7, 0), /* HSPI */
};
static unsigned long mul4_recalc(struct clk *clk)
{
return clk->parent->rate * 4;
}
static struct sh_clk_ops mul4_clk_ops = {
.recalc = mul4_recalc,
};
struct clk clkz_clk = {
.ops = &mul4_clk_ops,
.parent = &div4_clks[DIV4_S],
};
struct clk clkzs_clk = {
/* clks x 4 / 4 = clks */
.parent = &div4_clks[DIV4_S],
};
static struct clk *late_main_clks[] = {
&clkz_clk,
&clkzs_clk,
[MSTP323] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 23, 0), /* SDHI0 */
[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
[MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
[MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */
[MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */
[MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
[MSTP027] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 27, 0), /* I2C3 */
[MSTP026] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 26, 0), /* SCIF0 */
[MSTP025] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 25, 0), /* SCIF1 */
[MSTP024] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 24, 0), /* SCIF2 */
[MSTP023] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 23, 0), /* SCIF3 */
[MSTP022] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 22, 0), /* SCIF4 */
[MSTP021] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 21, 0), /* SCIF5 */
[MSTP016] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 16, 0), /* TMU0 */
[MSTP015] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 15, 0), /* TMU1 */
[MSTP014] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 14, 0), /* TMU2 */
[MSTP007] = SH_CLK_MSTP32(&clks_clk, MSTPCR0, 7, 0), /* HSPI */
};
static struct clk_lookup lookups[] = {
......@@ -151,12 +133,12 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("clkzs_clk", &clkzs_clk),
/* DIV4 clocks */
CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_S]),
CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_OUT]),
CLKDEV_CON_ID("shyway4_clk", &div4_clks[DIV4_S4]),
CLKDEV_CON_ID("shyway3_clk", &div4_clks[DIV4_S3]),
CLKDEV_CON_ID("shyway1_clk", &div4_clks[DIV4_S1]),
CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
CLKDEV_CON_ID("shyway_clk", &clks_clk),
CLKDEV_CON_ID("bus_clk", &clkout_clk),
CLKDEV_CON_ID("shyway4_clk", &clks4_clk),
CLKDEV_CON_ID("shyway3_clk", &clks3_clk),
CLKDEV_CON_ID("shyway1_clk", &clks1_clk),
CLKDEV_CON_ID("peripheral_clk", &clkp_clk),
/* MSTP32 clocks */
CLKDEV_DEV_ID("sata_rcar", &mstp_clks[MSTP115]), /* SATA */
......@@ -190,20 +172,60 @@ static struct clk_lookup lookups[] = {
void __init r8a7779_clock_init(void)
{
void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE);
u32 mode;
int k, ret = 0;
BUG_ON(!modemr);
mode = ioread32(modemr);
iounmap(modemr);
if (mode & MD(1)) {
plla_clk.rate = 1500000000;
SH_CLK_SET_RATIO(&clkz_clk_ratio, 2, 3);
SH_CLK_SET_RATIO(&clkzs_clk_ratio, 1, 6);
SH_CLK_SET_RATIO(&clki_clk_ratio, 1, 2);
SH_CLK_SET_RATIO(&clks_clk_ratio, 1, 6);
SH_CLK_SET_RATIO(&clks1_clk_ratio, 1, 12);
SH_CLK_SET_RATIO(&clks3_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clks4_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&clkp_clk_ratio, 1, 24);
SH_CLK_SET_RATIO(&clkg_clk_ratio, 1, 24);
if (mode & MD(2)) {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 36);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 36);
} else {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 24);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 24);
}
} else {
plla_clk.rate = 1600000000;
SH_CLK_SET_RATIO(&clkz_clk_ratio, 1, 2);
SH_CLK_SET_RATIO(&clkzs_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clki_clk_ratio, 1, 2);
SH_CLK_SET_RATIO(&clks_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clks1_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&clks3_clk_ratio, 1, 8);
SH_CLK_SET_RATIO(&clks4_clk_ratio, 1, 16);
SH_CLK_SET_RATIO(&clkp_clk_ratio, 1, 32);
SH_CLK_SET_RATIO(&clkg_clk_ratio, 1, 24);
if (mode & MD(2)) {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 32);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 32);
} else {
SH_CLK_SET_RATIO(&clkb_clk_ratio, 1, 24);
SH_CLK_SET_RATIO(&clkout_clk_ratio, 1, 24);
}
}
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
ret = clk_register(late_main_clks[k]);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
......
arch/arm/mach-shmobile/clock-r8a7790.c 0 → 100644
View file @ a8c4b90e
/*
* r8a7790 clock framework support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/common.h>
#define CPG_BASE 0xe6150000
#define CPG_LEN 0x1000
#define SMSTPCR2 0xe6150138
#define SMSTPCR7 0xe615014c
static struct clk_mapping cpg_mapping = {
.phys = CPG_BASE,
.len = CPG_LEN,
};
static struct clk p_clk = {
.rate = 65000000, /* shortcut for now */
.mapping = &cpg_mapping,
};
static struct clk mp_clk = {
.rate = 52000000, /* shortcut for now */
.mapping = &cpg_mapping,
};
static struct clk *main_clks[] = {
&p_clk,
&mp_clk,
};
enum { MSTP721, MSTP720,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP_NR };
static struct clk mstp_clks[MSTP_NR] = {
[MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
[MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
[MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
[MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
[MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
[MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
[MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
};
static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]),
CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]),
CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]),
CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]),
CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]),
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
};
void __init r8a7790_clock_init(void)
{
int k, ret = 0;
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
if (!ret)
shmobile_clk_init();
else
panic("failed to setup r8a7790 clocks\n");
}
arch/arm/mach-shmobile/clock-sh7372.c
View file @ a8c4b90e
......@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <mach/clock.h>
#include <mach/common.h>
/* SH7372 registers */
......@@ -83,39 +84,12 @@ struct clk sh7372_extal2_clk = {
.rate = 48000000,
};
/* A fixed divide-by-2 block */
static unsigned long div2_recalc(struct clk *clk)
{
return clk->parent->rate / 2;
}
static struct sh_clk_ops div2_clk_ops = {
.recalc = div2_recalc,
};
SH_CLK_RATIO(div2, 1, 2);
/* Divide dv_clki by two */
struct clk sh7372_dv_clki_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh7372_dv_clki_clk,
};
/* Divide extal1 by two */
static struct clk extal1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh7372_extal1_clk,
};
/* Divide extal2 by two */
static struct clk extal2_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh7372_extal2_clk,
};
/* Divide extal2 by four */
static struct clk extal2_div4_clk = {
.ops = &div2_clk_ops,
.parent = &extal2_div2_clk,
};
SH_FIXED_RATIO_CLKg(sh7372_dv_clki_div2_clk, sh7372_dv_clki_clk, div2);
SH_FIXED_RATIO_CLK(extal1_div2_clk, sh7372_extal1_clk, div2);
SH_FIXED_RATIO_CLK(extal2_div2_clk, sh7372_extal2_clk, div2);
SH_FIXED_RATIO_CLK(extal2_div4_clk, extal2_div2_clk, div2);
/* PLLC0 and PLLC1 */
static unsigned long pllc01_recalc(struct clk *clk)
......@@ -147,10 +121,7 @@ static struct clk pllc1_clk = {
};
/* Divide PLLC1 by two */
static struct clk pllc1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &pllc1_clk,
};
SH_FIXED_RATIO_CLK(pllc1_div2_clk, pllc1_clk, div2);
/* PLLC2 */
......@@ -342,7 +313,7 @@ static struct clk_div4_table div4_table = {
};
enum { DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_CSIR,
DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP,
DIV4_ZX, DIV4_HP,
DIV4_ISPB, DIV4_S, DIV4_ZB, DIV4_ZB3, DIV4_CP,
DIV4_DDRP, DIV4_NR };
......@@ -355,8 +326,6 @@ static struct clk div4_clks[DIV4_NR] = {
[DIV4_B] = DIV4(FRQCRA, 8, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_M1] = DIV4(FRQCRA, 4, 0x6fff, CLK_ENABLE_ON_INIT),
[DIV4_CSIR] = DIV4(FRQCRA, 0, 0x6fff, 0),
[DIV4_ZTR] = DIV4(FRQCRB, 20, 0x6fff, 0),
[DIV4_ZT] = DIV4(FRQCRB, 16, 0x6fff, 0),
[DIV4_ZX] = DIV4(FRQCRB, 12, 0x6fff, 0),
[DIV4_HP] = DIV4(FRQCRB, 4, 0x6fff, 0),
[DIV4_ISPB] = DIV4(FRQCRC, 20, 0x6fff, 0),
......@@ -516,8 +485,6 @@ static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("b_clk", &div4_clks[DIV4_B]),
CLKDEV_CON_ID("m1_clk", &div4_clks[DIV4_M1]),
CLKDEV_CON_ID("csir_clk", &div4_clks[DIV4_CSIR]),
CLKDEV_CON_ID("ztr_clk", &div4_clks[DIV4_ZTR]),
CLKDEV_CON_ID("zt_clk", &div4_clks[DIV4_ZT]),
CLKDEV_CON_ID("zx_clk", &div4_clks[DIV4_ZX]),
CLKDEV_CON_ID("hp_clk", &div4_clks[DIV4_HP]),
CLKDEV_CON_ID("ispb_clk", &div4_clks[DIV4_ISPB]),
......@@ -654,5 +621,4 @@ void __init sh7372_clock_init(void)
shmobile_clk_init();
else
panic("failed to setup sh7372 clocks\n");
}
arch/arm/mach-shmobile/clock-sh73a0.c
View file @ a8c4b90e
......@@ -21,6 +21,8 @@
#include <linux/io.h>
#include <linux/sh_clk.h>
#include <linux/clkdev.h>
#include <asm/processor.h>
#include <mach/clock.h>
#include <mach/common.h>
#define FRQCRA IOMEM(0xe6150000)
......@@ -82,61 +84,16 @@ struct clk sh73a0_extal2_clk = {
.rate = 48000000,
};
/* A fixed divide-by-2 block */
static unsigned long div2_recalc(struct clk *clk)
{
return clk->parent->rate / 2;
}
static struct sh_clk_ops div2_clk_ops = {
.recalc = div2_recalc,
};
static unsigned long div7_recalc(struct clk *clk)
{
return clk->parent->rate / 7;
}
static struct sh_clk_ops div7_clk_ops = {
.recalc = div7_recalc,
};
static unsigned long div13_recalc(struct clk *clk)
{
return clk->parent->rate / 13;
}
static struct sh_clk_ops div13_clk_ops = {
.recalc = div13_recalc,
};
/* Divide extal1 by two */
static struct clk extal1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh73a0_extal1_clk,
};
/* Divide extal2 by two */
static struct clk extal2_div2_clk = {
.ops = &div2_clk_ops,
.parent = &sh73a0_extal2_clk,
};
static struct sh_clk_ops main_clk_ops = {
.recalc = followparent_recalc,
};
/* Main clock */
static struct clk main_clk = {
/* .parent wll be set on sh73a0_clock_init() */
.ops = &main_clk_ops,
};
/* Divide Main clock by two */
static struct clk main_div2_clk = {
.ops = &div2_clk_ops,
.parent = &main_clk,
};
/* PLL0, PLL1, PLL2, PLL3 */
static unsigned long pll_recalc(struct clk *clk)
{
......@@ -192,21 +149,17 @@ static struct clk pll3_clk = {
.enable_bit = 3,
};
/* Divide PLL */
static struct clk pll1_div2_clk = {
.ops = &div2_clk_ops,
.parent = &pll1_clk,
};
static struct clk pll1_div7_clk = {
.ops = &div7_clk_ops,
.parent = &pll1_clk,
};
/* A fixed divide block */
SH_CLK_RATIO(div2, 1, 2);
SH_CLK_RATIO(div7, 1, 7);
SH_CLK_RATIO(div13, 1, 13);
static struct clk pll1_div13_clk = {
.ops = &div13_clk_ops,
.parent = &pll1_clk,
};
SH_FIXED_RATIO_CLK(extal1_div2_clk, sh73a0_extal1_clk, div2);
SH_FIXED_RATIO_CLK(extal2_div2_clk, sh73a0_extal2_clk, div2);
SH_FIXED_RATIO_CLK(main_div2_clk, main_clk, div2);
SH_FIXED_RATIO_CLK(pll1_div2_clk, pll1_clk, div2);
SH_FIXED_RATIO_CLK(pll1_div7_clk, pll1_clk, div7);
SH_FIXED_RATIO_CLK(pll1_div13_clk, pll1_clk, div13);
/* External input clock */
struct clk sh73a0_extcki_clk = {
......@@ -234,14 +187,24 @@ static struct clk *main_clks[] = {
&sh73a0_extalr_clk,
};
static void div4_kick(struct clk *clk)
static int frqcr_kick(void)
{
unsigned long value;
int i;
/* set KICK bit in FRQCRB to update hardware setting, check success */
__raw_writel(__raw_readl(FRQCRB) | (1 << 31), FRQCRB);
for (i = 1000; i; i--)
if (__raw_readl(FRQCRB) & (1 << 31))
cpu_relax();
else
return i;
/* set KICK bit in FRQCRB to update hardware setting */
value = __raw_readl(FRQCRB);
value |= (1 << 31);
__raw_writel(value, FRQCRB);
return -ETIMEDOUT;
}
static void div4_kick(struct clk *clk)
{
frqcr_kick();
}
static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
......@@ -258,7 +221,7 @@ static struct clk_div4_table div4_table = {
};
enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR };
DIV4_Z, DIV4_ZX, DIV4_HP, DIV4_NR };
#define DIV4(_reg, _bit, _mask, _flags) \
SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
......@@ -271,12 +234,24 @@ static struct clk div4_clks[DIV4_NR] = {
[DIV4_M1] = DIV4(FRQCRA, 4, 0x1dff, 0),
[DIV4_M2] = DIV4(FRQCRA, 0, 0x1dff, 0),
[DIV4_Z] = SH_CLK_DIV4(&pll0_clk, FRQCRB, 24, 0x97f, 0),
[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xdff, 0),
[DIV4_ZT] = DIV4(FRQCRB, 16, 0xdff, 0),
[DIV4_ZX] = DIV4(FRQCRB, 12, 0xdff, 0),
[DIV4_HP] = DIV4(FRQCRB, 4, 0xdff, 0),
};
static unsigned long twd_recalc(struct clk *clk)
{
return clk_get_rate(clk->parent) / 4;
}
static struct sh_clk_ops twd_clk_ops = {
.recalc = twd_recalc,
};
static struct clk twd_clk = {
.parent = &div4_clks[DIV4_Z],
.ops = &twd_clk_ops,
};
enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
......@@ -471,6 +446,7 @@ static struct clk dsi1phy_clk = {
static struct clk *late_main_clks[] = {
&dsi0phy_clk,
&dsi1phy_clk,
&twd_clk,
};
enum { MSTP001,
......@@ -535,6 +511,7 @@ static struct clk mstp_clks[MSTP_NR] = {
static struct clk_lookup lookups[] = {
/* main clocks */
CLKDEV_CON_ID("r_clk", &r_clk),
CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
/* DIV6 clocks */
CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),
......
arch/arm/mach-shmobile/clock.c
View file @ a8c4b90e
......@@ -23,6 +23,19 @@
#include <linux/init.h>
#include <linux/sh_clk.h>
#include <linux/export.h>
#include <mach/clock.h>
#include <mach/common.h>
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk)
{
struct clk_ratio *p = clk->priv;
return clk->parent->rate / p->div * p->mul;
};
struct sh_clk_ops shmobile_fixed_ratio_clk_ops = {
.recalc = shmobile_fixed_ratio_clk_recalc,
};
int __init shmobile_clk_init(void)
{
......
arch/arm/mach-shmobile/include/mach/clock.h 0 → 100644
View file @ a8c4b90e
#ifndef CLOCK_H
#define CLOCK_H
unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk);
extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops;
/* clock ratio */
struct clk_ratio {
int mul;
int div;
};
#define SH_CLK_RATIO(name, m, d) \
static struct clk_ratio name ##_ratio = { \
.mul = m, \
.div = d, \
}
#define SH_FIXED_RATIO_CLKg(name, p, r) \
struct clk name = { \
.parent = &p, \
.ops = &shmobile_fixed_ratio_clk_ops,\
.priv = &r ## _ratio, \
}
#define SH_FIXED_RATIO_CLK(name, p, r) \
static SH_FIXED_RATIO_CLKg(name, p, r);
#define SH_FIXED_RATIO_CLK_SET(name, p, m, d) \
SH_CLK_RATIO(name, m, d); \
SH_FIXED_RATIO_CLK(name, p, name);
#define SH_CLK_SET_RATIO(p, m, d) \
{ \
(p)->mul = m; \
(p)->div = d; \
}
#endif
arch/arm/mach-shmobile/include/mach/common.h
View file @ a8c4b90e
......@@ -16,60 +16,6 @@ extern struct platform_suspend_ops shmobile_suspend_ops;
struct cpuidle_driver;
extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
extern void sh7372_init_irq(void);
extern void sh7372_map_io(void);
extern void sh7372_earlytimer_init(void);
extern void sh7372_add_early_devices(void);
extern void sh7372_add_standard_devices(void);
extern void sh7372_add_early_devices_dt(void);
extern void sh7372_add_standard_devices_dt(void);
extern void sh7372_clock_init(void);
extern void sh7372_pinmux_init(void);
extern void sh7372_pm_init(void);
extern void sh7372_resume_core_standby_sysc(void);
extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
extern struct clk sh7372_extal1_clk;
extern struct clk sh7372_extal2_clk;
extern void sh73a0_init_delay(void);
extern void sh73a0_init_irq(void);
extern void sh73a0_init_irq_dt(void);
extern void sh73a0_map_io(void);
extern void sh73a0_earlytimer_init(void);
extern void sh73a0_add_early_devices(void);
extern void sh73a0_add_standard_devices(void);
extern void sh73a0_add_standard_devices_dt(void);
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
extern struct clk sh73a0_extal1_clk;
extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
extern struct clk sh73a0_extalr_clk;
extern void r8a7740_meram_workaround(void);
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7740_add_standard_devices(void);
extern void r8a7740_clock_init(u8 md_ck);
extern void r8a7740_pinmux_init(void);
extern void r8a7740_pm_init(void);
extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq(void);
extern void r8a7779_init_irq_extpin(int irlm);
extern void r8a7779_init_irq_dt(void);
extern void r8a7779_map_io(void);
extern void r8a7779_earlytimer_init(void);
extern void r8a7779_add_early_devices(void);
extern void r8a7779_add_standard_devices(void);
extern void r8a7779_add_standard_devices_dt(void);
extern void r8a7779_clock_init(void);
extern void r8a7779_pinmux_init(void);
extern void r8a7779_pm_init(void);
extern void r8a7779_register_twd(void);
#ifdef CONFIG_SUSPEND
int shmobile_suspend_init(void);
#else
......
arch/arm/mach-shmobile/include/mach/r8a73a4.h 0 → 100644
View file @ a8c4b90e
#ifndef __ASM_R8A73A4_H__
#define __ASM_R8A73A4_H__
void r8a73a4_add_standard_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
#endif /* __ASM_R8A73A4_H__ */
arch/arm/mach-shmobile/include/mach/r8a7740.h
View file @ a8c4b90e
......@@ -532,6 +532,15 @@ enum {
SHDMA_SLAVE_USBHS_RX,
};
extern void r8a7740_meram_workaround(void);
extern void r8a7740_init_irq(void);
extern void r8a7740_map_io(void);
extern void r8a7740_add_early_devices(void);
extern void r8a7740_add_standard_devices(void);
extern void r8a7740_clock_init(u8 md_ck);
extern void r8a7740_pinmux_init(void);
extern void r8a7740_pm_init(void);
#ifdef CONFIG_PM
extern void __init r8a7740_init_pm_domains(void);
#else
......
arch/arm/mach-shmobile/include/mach/r8a7778.h 0 → 100644
View file @ a8c4b90e
/*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_R8A7778_H__
#define __ASM_R8A7778_H__
#include <linux/sh_eth.h>
extern void r8a7778_add_standard_devices(void);
extern void r8a7778_add_standard_devices_dt(void);
extern void r8a7778_add_ether_device(struct sh_eth_plat_data *pdata);
extern void r8a7778_init_delay(void);
extern void r8a7778_init_irq(void);
extern void r8a7778_init_irq_dt(void);
extern void r8a7778_clock_init(void);
extern void r8a7778_init_irq_extpin(int irlm);
#endif /* __ASM_R8A7778_H__ */
arch/arm/mach-shmobile/include/mach/r8a7790.h 0 → 100644
View file @ a8c4b90e
#ifndef __ASM_R8A7790_H__
#define __ASM_R8A7790_H__
void r8a7790_add_standard_devices(void);
void r8a7790_clock_init(void);
void r8a7790_pinmux_init(void);
void r8a7790_timer_init(void);
#endif /* __ASM_R8A7790_H__ */
arch/arm/mach-shmobile/include/mach/sh7372.h
View file @ a8c4b90e
......@@ -449,6 +449,18 @@ extern struct clk sh7372_dv_clki_clk;
extern struct clk sh7372_dv_clki_div2_clk;
extern struct clk sh7372_pllc2_clk;
extern void sh7372_init_irq(void);
extern void sh7372_map_io(void);
extern void sh7372_earlytimer_init(void);
extern void sh7372_add_early_devices(void);
extern void sh7372_add_standard_devices(void);
extern void sh7372_add_early_devices_dt(void);
extern void sh7372_add_standard_devices_dt(void);
extern void sh7372_clock_init(void);
extern void sh7372_pinmux_init(void);
extern void sh7372_pm_init(void);
extern void sh7372_resume_core_standby_sysc(void);
extern int sh7372_do_idle_sysc(unsigned long sleep_mode);
extern void sh7372_intcs_suspend(void);
extern void sh7372_intcs_resume(void);
extern void sh7372_intca_suspend(void);
......
arch/arm/mach-shmobile/include/mach/sh73a0.h
View file @ a8c4b90e
......@@ -444,6 +444,21 @@ enum {
#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
extern void sh73a0_init_delay(void);
extern void sh73a0_init_irq(void);
extern void sh73a0_init_irq_dt(void);
extern void sh73a0_map_io(void);
extern void sh73a0_earlytimer_init(void);
extern void sh73a0_add_early_devices(void);
extern void sh73a0_add_standard_devices(void);
extern void sh73a0_add_standard_devices_dt(void);
extern void sh73a0_clock_init(void);
extern void sh73a0_pinmux_init(void);
extern void sh73a0_pm_init(void);
extern struct clk sh73a0_extal1_clk;
extern struct clk sh73a0_extal2_clk;
extern struct clk sh73a0_extcki_clk;
extern struct clk sh73a0_extalr_clk;
extern struct smp_operations sh73a0_smp_ops;
#endif /* __ASM_SH73A0_H__ */
arch/arm/mach-shmobile/intc-r8a7740.c
View file @ a8c4b90e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a73a4.c 0 → 100644
View file @ a8c4b90e
/*
* r8a73a4 processor support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a73a4.h>
#include <asm/mach/arch.h>
static const struct resource pfc_resources[] = {
DEFINE_RES_MEM(0xe6050000, 0x9000),
};
void __init r8a73a4_pinmux_init(void)
{
platform_device_register_simple("pfc-r8a73a4", -1, pfc_resources,
ARRAY_SIZE(pfc_resources));
}
#define SCIF_COMMON(scif_type, baseaddr, irq) \
.type = scif_type, \
.mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scbrr_algo_id = SCBRR_ALGO_4, \
.irqs = SCIx_IRQ_MUXED(irq)
#define SCIFA_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
}
#define SCIFB_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
.scscr = SCSCR_RE | SCSCR_TE, \
}
enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFB3 };
static const struct plat_sci_port scif[] = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
SCIFB_DATA(SCIFB0, 0xe6c50000, gic_spi(145)), /* SCIFB0 */
SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
SCIFB_DATA(SCIFB3, 0xe6cf0000, gic_spi(151)), /* SCIFB3 */
};
static inline void r8a73a4_register_scif(int idx)
{
platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
sizeof(struct plat_sci_port));
}
static const struct renesas_irqc_config irqc0_data = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ31 */
};
static const struct resource irqc0_resources[] = {
DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
DEFINE_RES_IRQ(gic_spi(4)), /* IRQ4 */
DEFINE_RES_IRQ(gic_spi(5)), /* IRQ5 */
DEFINE_RES_IRQ(gic_spi(6)), /* IRQ6 */
DEFINE_RES_IRQ(gic_spi(7)), /* IRQ7 */
DEFINE_RES_IRQ(gic_spi(8)), /* IRQ8 */
DEFINE_RES_IRQ(gic_spi(9)), /* IRQ9 */
DEFINE_RES_IRQ(gic_spi(10)), /* IRQ10 */
DEFINE_RES_IRQ(gic_spi(11)), /* IRQ11 */
DEFINE_RES_IRQ(gic_spi(12)), /* IRQ12 */
DEFINE_RES_IRQ(gic_spi(13)), /* IRQ13 */
DEFINE_RES_IRQ(gic_spi(14)), /* IRQ14 */
DEFINE_RES_IRQ(gic_spi(15)), /* IRQ15 */
DEFINE_RES_IRQ(gic_spi(16)), /* IRQ16 */
DEFINE_RES_IRQ(gic_spi(17)), /* IRQ17 */
DEFINE_RES_IRQ(gic_spi(18)), /* IRQ18 */
DEFINE_RES_IRQ(gic_spi(19)), /* IRQ19 */
DEFINE_RES_IRQ(gic_spi(20)), /* IRQ20 */
DEFINE_RES_IRQ(gic_spi(21)), /* IRQ21 */
DEFINE_RES_IRQ(gic_spi(22)), /* IRQ22 */
DEFINE_RES_IRQ(gic_spi(23)), /* IRQ23 */
DEFINE_RES_IRQ(gic_spi(24)), /* IRQ24 */
DEFINE_RES_IRQ(gic_spi(25)), /* IRQ25 */
DEFINE_RES_IRQ(gic_spi(26)), /* IRQ26 */
DEFINE_RES_IRQ(gic_spi(27)), /* IRQ27 */
DEFINE_RES_IRQ(gic_spi(28)), /* IRQ28 */
DEFINE_RES_IRQ(gic_spi(29)), /* IRQ29 */
DEFINE_RES_IRQ(gic_spi(30)), /* IRQ30 */
DEFINE_RES_IRQ(gic_spi(31)), /* IRQ31 */
};
static const struct renesas_irqc_config irqc1_data = {
.irq_base = irq_pin(32), /* IRQ32 -> IRQ57 */
};
static const struct resource irqc1_resources[] = {
DEFINE_RES_MEM(0xe61c0200, 0x200), /* IRQC Event Detector Block_1 */
DEFINE_RES_IRQ(gic_spi(32)), /* IRQ32 */
DEFINE_RES_IRQ(gic_spi(33)), /* IRQ33 */
DEFINE_RES_IRQ(gic_spi(34)), /* IRQ34 */
DEFINE_RES_IRQ(gic_spi(35)), /* IRQ35 */
DEFINE_RES_IRQ(gic_spi(36)), /* IRQ36 */
DEFINE_RES_IRQ(gic_spi(37)), /* IRQ37 */
DEFINE_RES_IRQ(gic_spi(38)), /* IRQ38 */
DEFINE_RES_IRQ(gic_spi(39)), /* IRQ39 */
DEFINE_RES_IRQ(gic_spi(40)), /* IRQ40 */
DEFINE_RES_IRQ(gic_spi(41)), /* IRQ41 */
DEFINE_RES_IRQ(gic_spi(42)), /* IRQ42 */
DEFINE_RES_IRQ(gic_spi(43)), /* IRQ43 */
DEFINE_RES_IRQ(gic_spi(44)), /* IRQ44 */
DEFINE_RES_IRQ(gic_spi(45)), /* IRQ45 */
DEFINE_RES_IRQ(gic_spi(46)), /* IRQ46 */
DEFINE_RES_IRQ(gic_spi(47)), /* IRQ47 */
DEFINE_RES_IRQ(gic_spi(48)), /* IRQ48 */
DEFINE_RES_IRQ(gic_spi(49)), /* IRQ49 */
DEFINE_RES_IRQ(gic_spi(50)), /* IRQ50 */
DEFINE_RES_IRQ(gic_spi(51)), /* IRQ51 */
DEFINE_RES_IRQ(gic_spi(52)), /* IRQ52 */
DEFINE_RES_IRQ(gic_spi(53)), /* IRQ53 */
DEFINE_RES_IRQ(gic_spi(54)), /* IRQ54 */
DEFINE_RES_IRQ(gic_spi(55)), /* IRQ55 */
DEFINE_RES_IRQ(gic_spi(56)), /* IRQ56 */
DEFINE_RES_IRQ(gic_spi(57)), /* IRQ57 */
};
#define r8a73a4_register_irqc(idx) \
platform_device_register_resndata(&platform_bus, "renesas_irqc", \
idx, irqc##idx##_resources, \
ARRAY_SIZE(irqc##idx##_resources), \
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
/* Thermal0 -> Thermal2 */
static const struct resource thermal0_resources[] = {
DEFINE_RES_MEM(0xe61f0000, 0x14),
DEFINE_RES_MEM(0xe61f0100, 0x38),
DEFINE_RES_MEM(0xe61f0200, 0x38),
DEFINE_RES_MEM(0xe61f0300, 0x38),
DEFINE_RES_IRQ(gic_spi(69)),
};
#define r8a73a4_register_thermal() \
platform_device_register_simple("rcar_thermal", -1, \
thermal0_resources, \
ARRAY_SIZE(thermal0_resources))
void __init r8a73a4_add_standard_devices(void)
{
r8a73a4_register_scif(SCIFA0);
r8a73a4_register_scif(SCIFA1);
r8a73a4_register_scif(SCIFB0);
r8a73a4_register_scif(SCIFB1);
r8a73a4_register_scif(SCIFB2);
r8a73a4_register_scif(SCIFB3);
r8a73a4_register_irqc(0);
r8a73a4_register_irqc(1);
r8a73a4_register_thermal();
}
#ifdef CONFIG_USE_OF
void __init r8a73a4_add_standard_devices_dt(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *r8a73a4_boards_compat_dt[] __initdata = {
"renesas,r8a73a4",
NULL,
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
.init_irq = irqchip_init,
.init_machine = r8a73a4_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a73a4_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
arch/arm/mach-shmobile/setup-r8a7740.c
View file @ a8c4b90e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7778.c 0 → 100644
View file @ a8c4b90e
/*
* r8a7778 processor support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
* Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/platform_device.h>
#include <linux/irqchip.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
#include <mach/irqs.h>
#include <mach/r8a7778.h>
#include <mach/common.h>
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
/* SCIF */
#define SCIF_INFO(baseaddr, irq) \
{ \
.mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
.scbrr_algo_id = SCBRR_ALGO_2, \
.type = PORT_SCIF, \
.irqs = SCIx_IRQ_MUXED(irq), \
}
static struct plat_sci_port scif_platform_data[] = {
SCIF_INFO(0xffe40000, gic_iid(0x66)),
SCIF_INFO(0xffe41000, gic_iid(0x67)),
SCIF_INFO(0xffe42000, gic_iid(0x68)),
SCIF_INFO(0xffe43000, gic_iid(0x69)),
SCIF_INFO(0xffe44000, gic_iid(0x6a)),
SCIF_INFO(0xffe45000, gic_iid(0x6b)),
};
/* TMU */
static struct resource sh_tmu0_resources[] = {
DEFINE_RES_MEM(0xffd80008, 12),
DEFINE_RES_IRQ(gic_iid(0x40)),
};
static struct sh_timer_config sh_tmu0_platform_data = {
.name = "TMU00",
.channel_offset = 0x4,
.timer_bit = 0,
.clockevent_rating = 200,
};
static struct resource sh_tmu1_resources[] = {
DEFINE_RES_MEM(0xffd80014, 12),
DEFINE_RES_IRQ(gic_iid(0x41)),
};
static struct sh_timer_config sh_tmu1_platform_data = {
.name = "TMU01",
.channel_offset = 0x10,
.timer_bit = 1,
.clocksource_rating = 200,
};
/* Ether */
static struct resource ether_resources[] = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
#define r8a7778_register_tmu(idx) \
platform_device_register_resndata( \
&platform_bus, "sh_tmu", idx, \
sh_tmu##idx##_resources, \
ARRAY_SIZE(sh_tmu##idx##_resources), \
&sh_tmu##idx##_platform_data, \
sizeof(sh_tmu##idx##_platform_data))
void __init r8a7778_add_standard_devices(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
void __iomem *base = ioremap_nocache(0xf0100000, 0x1000);
if (base) {
/*
* Early BRESP enable, Shared attribute override enable, 64K*16way
* don't call iounmap(base)
*/
l2x0_init(base, 0x40470000, 0x82000fff);
}
#endif
for (i = 0; i < ARRAY_SIZE(scif_platform_data); i++)
platform_device_register_data(&platform_bus, "sh-sci", i,
&scif_platform_data[i],
sizeof(struct plat_sci_port));
r8a7778_register_tmu(0);
r8a7778_register_tmu(1);
}
void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
{
platform_device_register_resndata(&platform_bus, "sh_eth", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
pdata, sizeof(*pdata));
}
static struct renesas_intc_irqpin_config irqpin_platform_data = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
.sense_bitfield_width = 2,
};
static struct resource irqpin_resources[] = {
DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
DEFINE_RES_IRQ(gic_iid(0x3b)), /* IRQ0 */
DEFINE_RES_IRQ(gic_iid(0x3c)), /* IRQ1 */
DEFINE_RES_IRQ(gic_iid(0x3d)), /* IRQ2 */
DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
};
void __init r8a7778_init_irq_extpin(int irlm)
{
void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
unsigned long tmp;
if (!icr0) {
pr_warn("r8a7778: unable to setup external irq pin mode\n");
return;
}
tmp = ioread32(icr0);
if (irlm)
tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
else
tmp &= ~(1 << 23); /* IRL mode - not supported */
tmp |= (1 << 21); /* LVLMODE = 1 */
iowrite32(tmp, icr0);
iounmap(icr0);
if (irlm)
platform_device_register_resndata(
&platform_bus, "renesas_intc_irqpin", -1,
irqpin_resources, ARRAY_SIZE(irqpin_resources),
&irqpin_platform_data, sizeof(irqpin_platform_data));
}
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
#define INT2NTSR0 0x00018 /* 0xfe700018 */
#define INT2NTSR1 0x0002c /* 0xfe70002c */
static void __init r8a7778_init_irq_common(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
BUG_ON(!base);
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);
/* unmask all known interrupts in INTCS2 */
__raw_writel(0x08330773, base + INT2SMSKCR0);
__raw_writel(0x00311110, base + INT2SMSKCR1);
iounmap(base);
}
void __init r8a7778_init_irq(void)
{
void __iomem *gic_dist_base;
void __iomem *gic_cpu_base;
gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE);
BUG_ON(!gic_dist_base || !gic_cpu_base);
/* use GIC to handle interrupts */
gic_init(0, 29, gic_dist_base, gic_cpu_base);
r8a7778_init_irq_common();
}
void __init r8a7778_init_delay(void)
{
shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
}
#ifdef CONFIG_USE_OF
void __init r8a7778_init_irq_dt(void)
{
irqchip_init();
r8a7778_init_irq_common();
}
static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
{},
};
void __init r8a7778_add_standard_devices_dt(void)
{
of_platform_populate(NULL, of_default_bus_match_table,
r8a7778_auxdata_lookup, NULL);
}
static const char *r8a7778_compat_dt[] __initdata = {
"renesas,r8a7778",
NULL,
};
DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_machine = r8a7778_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a7778_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
arch/arm/mach-shmobile/setup-r8a7779.c
View file @ a8c4b90e
......@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/of_platform.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
......@@ -68,11 +69,6 @@ static struct resource r8a7779_pfc_resources[] = {
.end = 0xfffc023b,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0xffc40000,
.end = 0xffc46fff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device r8a7779_pfc_device = {
......@@ -82,9 +78,59 @@ static struct platform_device r8a7779_pfc_device = {
.num_resources = ARRAY_SIZE(r8a7779_pfc_resources),
};
#define R8A7779_GPIO(idx, npins) \
static struct resource r8a7779_gpio##idx##_resources[] = { \
[0] = { \
.start = 0xffc40000 + 0x1000 * (idx), \
.end = 0xffc4002b + 0x1000 * (idx), \
.flags = IORESOURCE_MEM, \
}, \
[1] = { \
.start = gic_iid(0xad + (idx)), \
.flags = IORESOURCE_IRQ, \
} \
}; \
\
static struct gpio_rcar_config r8a7779_gpio##idx##_platform_data = { \
.gpio_base = 32 * (idx), \
.irq_base = 0, \
.number_of_pins = npins, \
.pctl_name = "pfc-r8a7779", \
}; \
\
static struct platform_device r8a7779_gpio##idx##_device = { \
.name = "gpio_rcar", \
.id = idx, \
.resource = r8a7779_gpio##idx##_resources, \
.num_resources = ARRAY_SIZE(r8a7779_gpio##idx##_resources), \
.dev = { \
.platform_data = &r8a7779_gpio##idx##_platform_data, \
}, \
}
R8A7779_GPIO(0, 32);
R8A7779_GPIO(1, 32);
R8A7779_GPIO(2, 32);
R8A7779_GPIO(3, 32);
R8A7779_GPIO(4, 32);
R8A7779_GPIO(5, 32);
R8A7779_GPIO(6, 9);
static struct platform_device *r8a7779_pinctrl_devices[] __initdata = {
&r8a7779_pfc_device,
&r8a7779_gpio0_device,
&r8a7779_gpio1_device,
&r8a7779_gpio2_device,
&r8a7779_gpio3_device,
&r8a7779_gpio4_device,
&r8a7779_gpio5_device,
&r8a7779_gpio6_device,
};
void __init r8a7779_pinmux_init(void)
{
platform_device_register(&r8a7779_pfc_device);
platform_add_devices(r8a7779_pinctrl_devices,
ARRAY_SIZE(r8a7779_pinctrl_devices));
}
static struct plat_sci_port scif0_platform_data = {
......
arch/arm/mach-shmobile/setup-r8a7790.c 0 → 100644
View file @ a8c4b90e
/*
* r8a7790 processor support
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/serial_sci.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
static const struct resource pfc_resources[] = {
DEFINE_RES_MEM(0xe6060000, 0x250),
DEFINE_RES_MEM(0xe6050000, 0x5050),
};
void __init r8a7790_pinmux_init(void)
{
platform_device_register_simple("pfc-r8a7790", -1, pfc_resources,
ARRAY_SIZE(pfc_resources));
}
#define SCIF_COMMON(scif_type, baseaddr, irq) \
.type = scif_type, \
.mapbase = baseaddr, \
.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
.irqs = SCIx_IRQ_MUXED(irq)
#define SCIFA_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIFA, baseaddr, irq), \
.scbrr_algo_id = SCBRR_ALGO_4, \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE0, \
}
#define SCIFB_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIFB, baseaddr, irq), \
.scbrr_algo_id = SCBRR_ALGO_4, \
.scscr = SCSCR_RE | SCSCR_TE, \
}
#define SCIF_DATA(index, baseaddr, irq) \
[index] = { \
SCIF_COMMON(PORT_SCIF, baseaddr, irq), \
.scbrr_algo_id = SCBRR_ALGO_2, \
.scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \
}
enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 };
static const struct plat_sci_port scif[] = {
SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */
SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */
SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */
SCIFB_DATA(SCIFB1, 0xe6c30000, gic_spi(149)), /* SCIFB1 */
SCIFB_DATA(SCIFB2, 0xe6ce0000, gic_spi(150)), /* SCIFB2 */
SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */
SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */
SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */
};
static inline void r8a7790_register_scif(int idx)
{
platform_device_register_data(&platform_bus, "sh-sci", idx, &scif[idx],
sizeof(struct plat_sci_port));
}
static struct renesas_irqc_config irqc0_data = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
};
static struct resource irqc0_resources[] = {
DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
};
#define r8a7790_register_irqc(idx) \
platform_device_register_resndata(&platform_bus, "renesas_irqc", \
idx, irqc##idx##_resources, \
ARRAY_SIZE(irqc##idx##_resources), \
&irqc##idx##_data, \
sizeof(struct renesas_irqc_config))
void __init r8a7790_add_standard_devices(void)
{
r8a7790_register_scif(SCIFA0);
r8a7790_register_scif(SCIFA1);
r8a7790_register_scif(SCIFB0);
r8a7790_register_scif(SCIFB1);
r8a7790_register_scif(SCIFB2);
r8a7790_register_scif(SCIFA2);
r8a7790_register_scif(SCIF0);
r8a7790_register_scif(SCIF1);
r8a7790_register_irqc(0);
}
void __init r8a7790_timer_init(void)
{
void __iomem *cntcr;
/* make sure arch timer is started by setting bit 0 of CNTCT */
cntcr = ioremap(0xe6080000, PAGE_SIZE);
iowrite32(1, cntcr);
iounmap(cntcr);
shmobile_timer_init();
}
#ifdef CONFIG_USE_OF
void __init r8a7790_add_standard_devices_dt(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *r8a7790_boards_compat_dt[] __initdata = {
"renesas,r8a7790",
NULL,
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
.init_irq = irqchip_init,
.init_machine = r8a7790_add_standard_devices_dt,
.init_time = r8a7790_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
arch/sh/kernel/cpu/sh2a/pinmux-sh7269.c
View file @ a8c4b90e
......@@ -9,7 +9,9 @@
* for more details.
*/
#include <linux/bug.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <cpu/pfc.h>
......
drivers/gpio/Kconfig
View file @ a8c4b90e
......@@ -204,6 +204,12 @@ config GPIO_PXA
help
Say yes here to support the PXA GPIO device
config GPIO_RCAR
tristate "Renesas R-Car GPIO"
depends on ARM
help
Say yes here to support GPIO on Renesas R-Car SoCs.
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
......
drivers/gpio/Makefile
View file @ a8c4b90e
......@@ -58,6 +58,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
......
drivers/gpio/gpio-rcar.c 0 → 100644
View file @ a8c4b90e
This diff is collapsed.
drivers/pinctrl/sh-pfc/Kconfig
View file @ a8c4b90e
......@@ -22,6 +22,11 @@ config GPIO_SH_PFC
This enables support for GPIOs within the SoC's pin function
controller.
config PINCTRL_PFC_R8A73A4
def_bool y
depends on ARCH_R8A73A4
select PINCTRL_SH_PFC
config PINCTRL_PFC_R8A7740
def_bool y
depends on ARCH_R8A7740
......
drivers/pinctrl/sh-pfc/Makefile
View file @ a8c4b90e
......@@ -3,6 +3,7 @@ ifeq ($(CONFIG_GPIO_SH_PFC),y)
sh-pfc-objs += gpio.o
endif
obj-$(CONFIG_PINCTRL_SH_PFC) += sh-pfc.o
obj-$(CONFIG_PINCTRL_PFC_R8A73A4) += pfc-r8a73a4.o
obj-$(CONFIG_PINCTRL_PFC_R8A7740) += pfc-r8a7740.o
obj-$(CONFIG_PINCTRL_PFC_R8A7779) += pfc-r8a7779.o
obj-$(CONFIG_PINCTRL_PFC_SH7203) += pfc-sh7203.o
......
drivers/pinctrl/sh-pfc/core.c
View file @ a8c4b90e
This diff is collapsed.
drivers/pinctrl/sh-pfc/core.h
View file @ a8c4b90e
......@@ -54,6 +54,7 @@ void sh_pfc_write_raw_reg(void __iomem *mapped_reg, unsigned long reg_width,
int sh_pfc_get_pin_index(struct sh_pfc *pfc, unsigned int pin);
int sh_pfc_config_mux(struct sh_pfc *pfc, unsigned mark, int pinmux_type);
extern const struct sh_pfc_soc_info r8a73a4_pinmux_info;
extern const struct sh_pfc_soc_info r8a7740_pinmux_info;
extern const struct sh_pfc_soc_info r8a7779_pinmux_info;
extern const struct sh_pfc_soc_info sh7203_pinmux_info;
......
drivers/pinctrl/sh-pfc/gpio.c
View file @ a8c4b90e
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a73a4.c 0 → 100644
View file @ a8c4b90e
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a7740.c
View file @ a8c4b90e
This diff is collapsed.
drivers/pinctrl/sh-pfc/pfc-r8a7779.c
View file @ a8c4b90e
This diff is collapsed.
drivers/pinctrl/sh-pfc/pinctrl.c
View file @ a8c4b90e
......@@ -182,6 +182,17 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev,
goto done;
}
if (!pfc->gpio) {
/* If GPIOs are handled externally the pin mux type need to be
* set to GPIO here.
*/
const struct sh_pfc_pin *pin = &pfc->info->pins[idx];
ret = sh_pfc_config_mux(pfc, pin->enum_id, PINMUX_TYPE_GPIO);
if (ret < 0)
goto done;
}
cfg->type = PINMUX_TYPE_GPIO;
ret = 0;
......
include/linux/platform_data/gpio-rcar.h 0 → 100644
View file @ a8c4b90e
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7