Commit aa303f2c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor
  i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH
  i2c-eg20t: modified the setting of transfer rate.
  i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number
  i2c: OMAP: Add DT support for i2c controller
  I2C: OMAP: NACK without STP
  I2C: OMAP: correct SYSC register offset for OMAP4
parents 4a7c1ff2 6f36a806
I2C for OMAP platforms
Required properties :
- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
- ti,hwmods : Must be "i2c<n>", n being the instance number (1-based)
- #address-cells = <1>;
- #size-cells = <0>;
Recommended properties :
- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
the default 100 kHz frequency will be used.
Optional properties:
- Child nodes conforming to i2c bus binding
Note: Current implementation will fetch base address, irq and dma
from omap hwmod data base during device registration.
Future plan is to migrate hwmod data base contents into device tree
blob so that, all the required data will be used from device tree dts
file.
Examples :
i2c1: i2c@0 {
compatible = "ti,omap3-i2c";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
clock-frequency = <400000>;
};
...@@ -682,19 +682,19 @@ config I2C_XILINX ...@@ -682,19 +682,19 @@ config I2C_XILINX
will be called xilinx_i2c. will be called xilinx_i2c.
config I2C_EG20T config I2C_EG20T
tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223)" tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
depends on PCI depends on PCI
help help
This driver is for PCH(Platform controller Hub) I2C of EG20T which This driver is for PCH(Platform controller Hub) I2C of EG20T which
is an IOH(Input/Output Hub) for x86 embedded processor. is an IOH(Input/Output Hub) for x86 embedded processor.
This driver can access PCH I2C bus device. This driver can access PCH I2C bus device.
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ This driver also can be used for LAPIS Semiconductor IOH(Input/
Output Hub), ML7213 and ML7223. Output Hub), ML7213, ML7223 and ML7831.
ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
for MP(Media Phone) use. for MP(Media Phone) use and ML7831 IOH is for general purpose use.
ML7213/ML7223 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223 is completely compatible for Intel EG20T PCH. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
comment "External I2C/SMBus adapter drivers" comment "External I2C/SMBus adapter drivers"
......
/* /*
* Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD. * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
* *
* This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
...@@ -136,7 +136,8 @@ ...@@ -136,7 +136,8 @@
/* /*
Set the number of I2C instance max Set the number of I2C instance max
Intel EG20T PCH : 1ch Intel EG20T PCH : 1ch
OKI SEMICONDUCTOR ML7213 IOH : 2ch LAPIS Semiconductor ML7213 IOH : 2ch
LAPIS Semiconductor ML7831 IOH : 1ch
*/ */
#define PCH_I2C_MAX_DEV 2 #define PCH_I2C_MAX_DEV 2
...@@ -180,15 +181,17 @@ static int pch_clk = 50000; /* specifies I2C clock speed in KHz */ ...@@ -180,15 +181,17 @@ static int pch_clk = 50000; /* specifies I2C clock speed in KHz */
static wait_queue_head_t pch_event; static wait_queue_head_t pch_event;
static DEFINE_MUTEX(pch_mutex); static DEFINE_MUTEX(pch_mutex);
/* Definition for ML7213 by OKI SEMICONDUCTOR */ /* Definition for ML7213 by LAPIS Semiconductor */
#define PCI_VENDOR_ID_ROHM 0x10DB #define PCI_VENDOR_ID_ROHM 0x10DB
#define PCI_DEVICE_ID_ML7213_I2C 0x802D #define PCI_DEVICE_ID_ML7213_I2C 0x802D
#define PCI_DEVICE_ID_ML7223_I2C 0x8010 #define PCI_DEVICE_ID_ML7223_I2C 0x8010
#define PCI_DEVICE_ID_ML7831_I2C 0x8817
static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id) = { static DEFINE_PCI_DEVICE_TABLE(pch_pcidev_id) = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH_I2C), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_I2C), 2, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_I2C), 1, },
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, },
{0,} {0,}
}; };
...@@ -243,7 +246,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap) ...@@ -243,7 +246,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
if (pch_clk > PCH_MAX_CLK) if (pch_clk > PCH_MAX_CLK)
pch_clk = 62500; pch_clk = 62500;
pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / pch_i2c_speed * 8; pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / (pch_i2c_speed * 8);
/* Set transfer speed in I2CBC */ /* Set transfer speed in I2CBC */
iowrite32(pch_i2cbc, p + PCH_I2CBC); iowrite32(pch_i2cbc, p + PCH_I2CBC);
...@@ -918,7 +921,9 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, ...@@ -918,7 +921,9 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
pch_adap->dev.parent = &pdev->dev; pch_adap->dev.parent = &pdev->dev;
pch_i2c_init(&adap_info->pch_data[i]); pch_i2c_init(&adap_info->pch_data[i]);
ret = i2c_add_adapter(pch_adap);
pch_adap->nr = i;
ret = i2c_add_numbered_adapter(pch_adap);
if (ret) { if (ret) {
pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
goto err_add_adapter; goto err_add_adapter;
...@@ -1058,8 +1063,8 @@ static void __exit pch_pci_exit(void) ...@@ -1058,8 +1063,8 @@ static void __exit pch_pci_exit(void)
} }
module_exit(pch_pci_exit); module_exit(pch_pci_exit);
MODULE_DESCRIPTION("Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH I2C Driver"); MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C");
MODULE_LICENSE("GPL"); MODULE_LICENSE("GPL");
MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.okisemi.com>"); MODULE_AUTHOR("Tomoya MORINAGA. <tomoya-linux@dsn.lapis-semi.com>");
module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR));
module_param(pch_clk, int, (S_IRUSR | S_IWUSR)); module_param(pch_clk, int, (S_IRUSR | S_IWUSR));
...@@ -37,6 +37,9 @@ ...@@ -37,6 +37,9 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/clk.h> #include <linux/clk.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/of.h>
#include <linux/of_i2c.h>
#include <linux/of_device.h>
#include <linux/slab.h> #include <linux/slab.h>
#include <linux/i2c-omap.h> #include <linux/i2c-omap.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
...@@ -182,7 +185,9 @@ struct omap_i2c_dev { ...@@ -182,7 +185,9 @@ struct omap_i2c_dev {
u32 latency; /* maximum mpu wkup latency */ u32 latency; /* maximum mpu wkup latency */
void (*set_mpu_wkup_lat)(struct device *dev, void (*set_mpu_wkup_lat)(struct device *dev,
long latency); long latency);
u32 speed; /* Speed of bus in Khz */ u32 speed; /* Speed of bus in kHz */
u32 dtrev; /* extra revision from DT */
u32 flags;
u16 cmd_err; u16 cmd_err;
u8 *buf; u8 *buf;
u8 *regs; u8 *regs;
...@@ -235,7 +240,7 @@ static const u8 reg_map_ip_v2[] = { ...@@ -235,7 +240,7 @@ static const u8 reg_map_ip_v2[] = {
[OMAP_I2C_BUF_REG] = 0x94, [OMAP_I2C_BUF_REG] = 0x94,
[OMAP_I2C_CNT_REG] = 0x98, [OMAP_I2C_CNT_REG] = 0x98,
[OMAP_I2C_DATA_REG] = 0x9c, [OMAP_I2C_DATA_REG] = 0x9c,
[OMAP_I2C_SYSC_REG] = 0x20, [OMAP_I2C_SYSC_REG] = 0x10,
[OMAP_I2C_CON_REG] = 0xa4, [OMAP_I2C_CON_REG] = 0xa4,
[OMAP_I2C_OA_REG] = 0xa8, [OMAP_I2C_OA_REG] = 0xa8,
[OMAP_I2C_SA_REG] = 0xac, [OMAP_I2C_SA_REG] = 0xac,
...@@ -266,11 +271,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) ...@@ -266,11 +271,7 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
static void omap_i2c_unidle(struct omap_i2c_dev *dev) static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{ {
struct omap_i2c_bus_platform_data *pdata; if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
pdata = dev->dev->platform_data;
if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate); omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate); omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
...@@ -291,13 +292,10 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev) ...@@ -291,13 +292,10 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
static void omap_i2c_idle(struct omap_i2c_dev *dev) static void omap_i2c_idle(struct omap_i2c_dev *dev)
{ {
struct omap_i2c_bus_platform_data *pdata;
u16 iv; u16 iv;
pdata = dev->dev->platform_data;
dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
if (pdata->rev == OMAP_I2C_IP_VERSION_2) if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1); omap_i2c_write_reg(dev, OMAP_I2C_IP_V2_IRQENABLE_CLR, 1);
else else
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
...@@ -320,9 +318,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) ...@@ -320,9 +318,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
unsigned long timeout; unsigned long timeout;
unsigned long internal_clk = 0; unsigned long internal_clk = 0;
struct clk *fclk; struct clk *fclk;
struct omap_i2c_bus_platform_data *pdata;
pdata = dev->dev->platform_data;
if (dev->rev >= OMAP_I2C_OMAP1_REV_2) { if (dev->rev >= OMAP_I2C_OMAP1_REV_2) {
/* Disable I2C controller before soft reset */ /* Disable I2C controller before soft reset */
...@@ -373,7 +368,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) ...@@ -373,7 +368,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
} }
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
if (pdata->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) { if (dev->flags & OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK) {
/* /*
* The I2C functional clock is the armxor_ck, so there's * The I2C functional clock is the armxor_ck, so there's
* no need to get "armxor_ck" separately. Now, if OMAP2420 * no need to get "armxor_ck" separately. Now, if OMAP2420
...@@ -397,7 +392,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) ...@@ -397,7 +392,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
psc = fclk_rate / 12000000; psc = fclk_rate / 12000000;
} }
if (!(pdata->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) { if (!(dev->flags & OMAP_I2C_FLAG_SIMPLE_CLOCK)) {
/* /*
* HSI2C controller internal clk rate should be 19.2 Mhz for * HSI2C controller internal clk rate should be 19.2 Mhz for
...@@ -406,7 +401,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) ...@@ -406,7 +401,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
* The filter is iclk (fclk for HS) period. * The filter is iclk (fclk for HS) period.
*/ */
if (dev->speed > 400 || if (dev->speed > 400 ||
pdata->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK) dev->flags & OMAP_I2C_FLAG_FORCE_19200_INT_CLK)
internal_clk = 19200; internal_clk = 19200;
else if (dev->speed > 100) else if (dev->speed > 100)
internal_clk = 9600; internal_clk = 9600;
...@@ -475,7 +470,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) ...@@ -475,7 +470,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
dev->errata = 0; dev->errata = 0;
if (pdata->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207) if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
dev->errata |= I2C_OMAP_ERRATA_I207; dev->errata |= I2C_OMAP_ERRATA_I207;
/* Enable interrupts */ /* Enable interrupts */
...@@ -484,7 +479,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) ...@@ -484,7 +479,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
OMAP_I2C_IE_AL) | ((dev->fifo_size) ? OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
(OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0); (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
if (pdata->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) { if (dev->flags & OMAP_I2C_FLAG_RESET_REGS_POSTIDLE) {
dev->pscstate = psc; dev->pscstate = psc;
dev->scllstate = scll; dev->scllstate = scll;
dev->sclhstate = sclh; dev->sclhstate = sclh;
...@@ -804,9 +799,6 @@ omap_i2c_isr(int this_irq, void *dev_id) ...@@ -804,9 +799,6 @@ omap_i2c_isr(int this_irq, void *dev_id)
u16 bits; u16 bits;
u16 stat, w; u16 stat, w;
int err, count = 0; int err, count = 0;
struct omap_i2c_bus_platform_data *pdata;
pdata = dev->dev->platform_data;
if (pm_runtime_suspended(dev->dev)) if (pm_runtime_suspended(dev->dev))
return IRQ_NONE; return IRQ_NONE;
...@@ -830,11 +822,9 @@ omap_i2c_isr(int this_irq, void *dev_id) ...@@ -830,11 +822,9 @@ omap_i2c_isr(int this_irq, void *dev_id)
~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR | ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
if (stat & OMAP_I2C_STAT_NACK) { if (stat & OMAP_I2C_STAT_NACK)
err |= OMAP_I2C_STAT_NACK; err |= OMAP_I2C_STAT_NACK;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
OMAP_I2C_CON_STP);
}
if (stat & OMAP_I2C_STAT_AL) { if (stat & OMAP_I2C_STAT_AL) {
dev_err(dev->dev, "Arbitration lost\n"); dev_err(dev->dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL; err |= OMAP_I2C_STAT_AL;
...@@ -875,7 +865,7 @@ omap_i2c_isr(int this_irq, void *dev_id) ...@@ -875,7 +865,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
* Data reg in 2430, omap3 and * Data reg in 2430, omap3 and
* omap4 is 8 bit wide * omap4 is 8 bit wide
*/ */
if (pdata->flags & if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) { OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) { if (dev->buf_len) {
*dev->buf++ = w >> 8; *dev->buf++ = w >> 8;
...@@ -918,7 +908,7 @@ omap_i2c_isr(int this_irq, void *dev_id) ...@@ -918,7 +908,7 @@ omap_i2c_isr(int this_irq, void *dev_id)
* Data reg in 2430, omap3 and * Data reg in 2430, omap3 and
* omap4 is 8 bit wide * omap4 is 8 bit wide
*/ */
if (pdata->flags & if (dev->flags &
OMAP_I2C_FLAG_16BIT_DATA_REG) { OMAP_I2C_FLAG_16BIT_DATA_REG) {
if (dev->buf_len) { if (dev->buf_len) {
w |= *dev->buf++ << 8; w |= *dev->buf++ << 8;
...@@ -965,6 +955,32 @@ static const struct i2c_algorithm omap_i2c_algo = { ...@@ -965,6 +955,32 @@ static const struct i2c_algorithm omap_i2c_algo = {
.functionality = omap_i2c_func, .functionality = omap_i2c_func,
}; };
#ifdef CONFIG_OF
static struct omap_i2c_bus_platform_data omap3_pdata = {
.rev = OMAP_I2C_IP_VERSION_1,
.flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 |
OMAP_I2C_FLAG_RESET_REGS_POSTIDLE |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
static struct omap_i2c_bus_platform_data omap4_pdata = {
.rev = OMAP_I2C_IP_VERSION_2,
};
static const struct of_device_id omap_i2c_of_match[] = {
{
.compatible = "ti,omap4-i2c",
.data = &omap4_pdata,
},
{
.compatible = "ti,omap3-i2c",
.data = &omap3_pdata,
},
{ },
};
MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
#endif
static int __devinit static int __devinit
omap_i2c_probe(struct platform_device *pdev) omap_i2c_probe(struct platform_device *pdev)
{ {
...@@ -972,9 +988,10 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -972,9 +988,10 @@ omap_i2c_probe(struct platform_device *pdev)
struct i2c_adapter *adap; struct i2c_adapter *adap;
struct resource *mem, *irq, *ioarea; struct resource *mem, *irq, *ioarea;
struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data; struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
irq_handler_t isr; irq_handler_t isr;
int r; int r;
u32 speed = 0;
/* NOTE: driver uses the static register mapping */ /* NOTE: driver uses the static register mapping */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
...@@ -1001,15 +1018,24 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1001,15 +1018,24 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_release_region; goto err_release_region;
} }
if (pdata != NULL) { match = of_match_device(omap_i2c_of_match, &pdev->dev);
speed = pdata->clkrate; if (match) {
u32 freq = 100000; /* default to 100000 Hz */
pdata = match->data;
dev->dtrev = pdata->rev;
dev->flags = pdata->flags;
of_property_read_u32(node, "clock-frequency", &freq);
/* convert DT freq value in Hz into kHz for speed */
dev->speed = freq / 1000;
} else if (pdata != NULL) {
dev->speed = pdata->clkrate;
dev->flags = pdata->flags;
dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
} else { dev->dtrev = pdata->rev;
speed = 100; /* Default speed */
dev->set_mpu_wkup_lat = NULL;
} }
dev->speed = speed;
dev->dev = &pdev->dev; dev->dev = &pdev->dev;
dev->irq = irq->start; dev->irq = irq->start;
dev->base = ioremap(mem->start, resource_size(mem)); dev->base = ioremap(mem->start, resource_size(mem));
...@@ -1020,9 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1020,9 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev); platform_set_drvdata(pdev, dev);
dev->reg_shift = (pdata->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3; dev->reg_shift = (dev->flags >> OMAP_I2C_FLAG_BUS_SHIFT__SHIFT) & 3;
if (pdata->rev == OMAP_I2C_IP_VERSION_2) if (dev->dtrev == OMAP_I2C_IP_VERSION_2)
dev->regs = (u8 *)reg_map_ip_v2; dev->regs = (u8 *)reg_map_ip_v2;
else else
dev->regs = (u8 *)reg_map_ip_v1; dev->regs = (u8 *)reg_map_ip_v1;
...@@ -1035,7 +1061,7 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1035,7 +1061,7 @@ omap_i2c_probe(struct platform_device *pdev)
if (dev->rev <= OMAP_I2C_REV_ON_3430) if (dev->rev <= OMAP_I2C_REV_ON_3430)
dev->errata |= I2C_OMAP3_1P153; dev->errata |= I2C_OMAP3_1P153;
if (!(pdata->flags & OMAP_I2C_FLAG_NO_FIFO)) { if (!(dev->flags & OMAP_I2C_FLAG_NO_FIFO)) {
u16 s; u16 s;
/* Set up the fifo size - Get total size */ /* Set up the fifo size - Get total size */
...@@ -1058,7 +1084,7 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1058,7 +1084,7 @@ omap_i2c_probe(struct platform_device *pdev)
/* calculate wakeup latency constraint for MPU */ /* calculate wakeup latency constraint for MPU */
if (dev->set_mpu_wkup_lat != NULL) if (dev->set_mpu_wkup_lat != NULL)
dev->latency = (1000000 * dev->fifo_size) / dev->latency = (1000000 * dev->fifo_size) /
(1000 * speed / 8); (1000 * dev->speed / 8);
} }
/* reset ASAP, clearing any IRQs */ /* reset ASAP, clearing any IRQs */
...@@ -1074,7 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1074,7 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev)
} }
dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id, dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", pdev->id,
pdata->rev, dev->rev >> 4, dev->rev & 0xf, dev->speed); dev->dtrev, dev->rev >> 4, dev->rev & 0xf, dev->speed);
pm_runtime_put(dev->dev); pm_runtime_put(dev->dev);
...@@ -1085,6 +1111,7 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1085,6 +1111,7 @@ omap_i2c_probe(struct platform_device *pdev)
strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name)); strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
adap->algo = &omap_i2c_algo; adap->algo = &omap_i2c_algo;
adap->dev.parent = &pdev->dev; adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
/* i2c device drivers may be active on return from add_adapter() */ /* i2c device drivers may be active on return from add_adapter() */
adap->nr = pdev->id; adap->nr = pdev->id;
...@@ -1094,6 +1121,8 @@ omap_i2c_probe(struct platform_device *pdev) ...@@ -1094,6 +1121,8 @@ omap_i2c_probe(struct platform_device *pdev)
goto err_free_irq; goto err_free_irq;
} }
of_i2c_register_devices(adap);
return 0; return 0;
err_free_irq: err_free_irq:
...@@ -1166,6 +1195,7 @@ static struct platform_driver omap_i2c_driver = { ...@@ -1166,6 +1195,7 @@ static struct platform_driver omap_i2c_driver = {
.name = "omap_i2c", .name = "omap_i2c",
.owner = THIS_MODULE, .owner = THIS_MODULE,
.pm = OMAP_I2C_PM_OPS, .pm = OMAP_I2C_PM_OPS,
.of_match_table = of_match_ptr(omap_i2c_of_match),
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment