Commit aa63b947 authored by Alexandru Ardelean's avatar Alexandru Ardelean Committed by David S. Miller

net: phy: adin: const-ify static data

Some bits of static data should have been made const from the start.
This change adds the const qualifier where appropriate.
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarAlexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1f399fc7
......@@ -145,7 +145,7 @@ struct adin_clause45_mmd_map {
u16 adin_regnum;
};
static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
static const struct adin_clause45_mmd_map adin_clause45_mmd_map[] = {
{ MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE, ADIN1300_EEE_CAP_REG },
{ MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, ADIN1300_EEE_LPABLE_REG },
{ MDIO_MMD_AN, MDIO_AN_EEE_ADV, ADIN1300_EEE_ADV_REG },
......@@ -159,7 +159,7 @@ struct adin_hw_stat {
u16 reg2;
};
static struct adin_hw_stat adin_hw_stats[] = {
static const struct adin_hw_stat adin_hw_stats[] = {
{ "total_frames_checked_count", 0x940A, 0x940B }, /* hi + lo */
{ "length_error_frames_count", 0x940C },
{ "alignment_error_frames_count", 0x940D },
......@@ -456,7 +456,7 @@ static int adin_phy_config_intr(struct phy_device *phydev)
static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad,
u16 cl45_regnum)
{
struct adin_clause45_mmd_map *m;
const struct adin_clause45_mmd_map *m;
int i;
if (devad == MDIO_MMD_VEND1)
......@@ -650,7 +650,7 @@ static void adin_get_strings(struct phy_device *phydev, u8 *data)
}
static int adin_read_mmd_stat_regs(struct phy_device *phydev,
struct adin_hw_stat *stat,
const struct adin_hw_stat *stat,
u32 *val)
{
int ret;
......@@ -676,7 +676,7 @@ static int adin_read_mmd_stat_regs(struct phy_device *phydev,
static u64 adin_get_stat(struct phy_device *phydev, int i)
{
struct adin_hw_stat *stat = &adin_hw_stats[i];
const struct adin_hw_stat *stat = &adin_hw_stats[i];
struct adin_priv *priv = phydev->priv;
u32 val;
int ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment