Skip to content

L
linux
Commit aa66cc66 authored by Chris Zhong's avatar Chris Zhong Committed by Mark Brown
Browse files
Options

regulator: pwm-regulator: get voltage and duty table from dts 

rename st-pwm to pwm-regulator. And support getting voltage & duty table from
device tree, other platforms can also use this driver without any modify.
Signed-off-by: default avatarChris Zhong <zyw@rock-chips.com>
Reviewed-by: default avatarDoug Anderson <dianders@chromium.org>
Tested-by: default avatarDoug Anderson <dianders@chromium.org>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 7d1311b9
Hide whitespace changes
Inline Side-by-side
Showing with 205 additions and 7 deletions
drivers/regulator/Kconfig
View file @ aa66cc66
......@@ -449,6 +449,13 @@ config REGULATOR_PFUZE100
Say y here to support the regulators found on the Freescale
PFUZE100/PFUZE200 PMIC.
config REGULATOR_PWM
tristate "PWM voltage regulator"
depends on PWM
help
This driver supports PWM controlled voltage regulators. PWM
duty cycle can increase or decrease the voltage.
config REGULATOR_RC5T583
tristate "RICOH RC5T583 Power regulators"
depends on MFD_RC5T583
......@@ -483,12 +490,6 @@ config REGULATOR_S5M8767
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
supports DVS mode with 8bits of output voltage control.
config REGULATOR_ST_PWM
tristate "STMicroelectronics PWM voltage regulator"
depends on ARCH_STI
help
This driver supports ST's PWM controlled voltage regulators.
config REGULATOR_TI_ABB
tristate "TI Adaptive Body Bias on-chip LDO"
depends on ARCH_OMAP
......
drivers/regulator/Makefile
View file @ aa66cc66
......@@ -57,6 +57,7 @@ obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
......@@ -65,7 +66,6 @@ obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
obj-$(CONFIG_REGULATOR_ST_PWM) += st-pwm.o
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
......
drivers/regulator/st-pwm.c → drivers/regulator/pwm-regulator.c
View file @ aa66cc66
/*
* Regulator driver for ST's PWM Regulators
* Regulator driver for PWM Regulators
*
* Copyright (C) 2014 - STMicroelectronics Inc.
*
......@@ -20,43 +20,40 @@
#include <linux/of_device.h>
#include <linux/pwm.h>
#define ST_PWM_REG_PERIOD 8448
struct st_pwm_regulator_pdata {
const struct regulator_desc *desc;
struct st_pwm_voltages *duty_cycle_table;
};
struct st_pwm_regulator_data {
const struct st_pwm_regulator_pdata *pdata;
struct pwm_regulator_data {
struct regulator_desc desc;
struct pwm_voltages *duty_cycle_table;
struct pwm_device *pwm;
bool enabled;
int state;
};
struct st_pwm_voltages {
struct pwm_voltages {
unsigned int uV;
unsigned int dutycycle;
};
static int st_pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
static int pwm_regulator_get_voltage_sel(struct regulator_dev *dev)
{
struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
return drvdata->state;
}
static int st_pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
unsigned selector)
static int pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
unsigned selector)
{
struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
unsigned int pwm_reg_period;
int dutycycle;
int ret;
dutycycle = (ST_PWM_REG_PERIOD / 100) *
drvdata->pdata->duty_cycle_table[selector].dutycycle;
pwm_reg_period = pwm_get_period(drvdata->pwm);
ret = pwm_config(drvdata->pwm, dutycycle, ST_PWM_REG_PERIOD);
dutycycle = (pwm_reg_period *
drvdata->duty_cycle_table[selector].dutycycle) / 100;
ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period);
if (ret) {
dev_err(&dev->dev, "Failed to configure PWM\n");
return ret;
......@@ -76,61 +73,40 @@ static int st_pwm_regulator_set_voltage_sel(struct regulator_dev *dev,
return 0;
}
static int st_pwm_regulator_list_voltage(struct regulator_dev *dev,
unsigned selector)
static int pwm_regulator_list_voltage(struct regulator_dev *dev,
unsigned selector)
{
struct st_pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
if (selector >= dev->desc->n_voltages)
if (selector >= drvdata->desc.n_voltages)
return -EINVAL;
return drvdata->pdata->duty_cycle_table[selector].uV;
return drvdata->duty_cycle_table[selector].uV;
}
static struct regulator_ops st_pwm_regulator_voltage_ops = {
.set_voltage_sel = st_pwm_regulator_set_voltage_sel,
.get_voltage_sel = st_pwm_regulator_get_voltage_sel,
.list_voltage = st_pwm_regulator_list_voltage,
static struct regulator_ops pwm_regulator_voltage_ops = {
.set_voltage_sel = pwm_regulator_set_voltage_sel,
.get_voltage_sel = pwm_regulator_get_voltage_sel,
.list_voltage = pwm_regulator_list_voltage,
.map_voltage = regulator_map_voltage_iterate,
};
static struct st_pwm_voltages b2105_duty_cycle_table[] = {
{ .uV = 1114000, .dutycycle = 0, },
{ .uV = 1095000, .dutycycle = 10, },
{ .uV = 1076000, .dutycycle = 20, },
{ .uV = 1056000, .dutycycle = 30, },
{ .uV = 1036000, .dutycycle = 40, },
{ .uV = 1016000, .dutycycle = 50, },
/* WARNING: Values above 50% duty-cycle cause boot failures. */
};
static const struct regulator_desc b2105_desc = {
.name = "b2105-pwm-regulator",
.ops = &st_pwm_regulator_voltage_ops,
static const struct regulator_desc pwm_regulator_desc = {
.name = "pwm-regulator",
.ops = &pwm_regulator_voltage_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(b2105_duty_cycle_table),
.supply_name = "pwm",
};
static const struct st_pwm_regulator_pdata b2105_info = {
.desc = &b2105_desc,
.duty_cycle_table = b2105_duty_cycle_table,
};
static const struct of_device_id st_pwm_of_match[] = {
{ .compatible = "st,b2105-pwm-regulator", .data = &b2105_info, },
{ },
};
MODULE_DEVICE_TABLE(of, st_pwm_of_match);
static int st_pwm_regulator_probe(struct platform_device *pdev)
static int pwm_regulator_probe(struct platform_device *pdev)
{
struct st_pwm_regulator_data *drvdata;
struct pwm_regulator_data *drvdata;
struct property *prop;
struct regulator_dev *regulator;
struct regulator_config config = { };
struct device_node *np = pdev->dev.of_node;
const struct of_device_id *of_match;
int length, ret;
if (!np) {
dev_err(&pdev->dev, "Device Tree node missing\n");
......@@ -141,12 +117,37 @@ static int st_pwm_regulator_probe(struct platform_device *pdev)
if (!drvdata)
return -ENOMEM;
of_match = of_match_device(st_pwm_of_match, &pdev->dev);
if (!of_match) {
dev_err(&pdev->dev, "failed to match of device\n");
return -ENODEV;
memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc));
/* determine the number of voltage-table */
prop = of_find_property(np, "voltage-table", &length);
if (!prop) {
dev_err(&pdev->dev, "No voltage-table\n");
return -EINVAL;
}
if ((length < sizeof(*drvdata->duty_cycle_table)) ||
(length % sizeof(*drvdata->duty_cycle_table))) {
dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
length, GFP_KERNEL);
if (!drvdata->duty_cycle_table)
return -ENOMEM;
/* read voltage table from DT property */
ret = of_property_read_u32_array(np, "voltage-table",
(u32 *)drvdata->duty_cycle_table,
length / sizeof(u32));
if (ret < 0) {
dev_err(&pdev->dev, "read voltage-table failed\n");
return ret;
}
drvdata->pdata = of_match->data;
config.init_data = of_get_regulator_init_data(&pdev->dev, np);
if (!config.init_data)
......@@ -163,28 +164,34 @@ static int st_pwm_regulator_probe(struct platform_device *pdev)
}
regulator = devm_regulator_register(&pdev->dev,
drvdata->pdata->desc, &config);
&drvdata->desc, &config);
if (IS_ERR(regulator)) {
dev_err(&pdev->dev, "Failed to register regulator %s\n",
drvdata->pdata->desc->name);
drvdata->desc.name);
return PTR_ERR(regulator);
}
return 0;
}
static struct platform_driver st_pwm_regulator_driver = {
static const struct of_device_id pwm_of_match[] = {
{ .compatible = "pwm-regulator" },
{ },
};
MODULE_DEVICE_TABLE(of, pwm_of_match);
static struct platform_driver pwm_regulator_driver = {
.driver = {
.name = "st-pwm-regulator",
.name = "pwm-regulator",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(st_pwm_of_match),
.of_match_table = of_match_ptr(pwm_of_match),
},
.probe = st_pwm_regulator_probe,
.probe = pwm_regulator_probe,
};
module_platform_driver(st_pwm_regulator_driver);
module_platform_driver(pwm_regulator_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
MODULE_DESCRIPTION("ST PWM Regulator Driver");
MODULE_ALIAS("platform:st_pwm-regulator");
MODULE_DESCRIPTION("PWM Regulator Driver");
MODULE_ALIAS("platform:pwm-regulator");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7