Commit ab1db0cf authored by Jordan Crouse's avatar Jordan Crouse Committed by Linus Torvalds

[PATCH] gxfb: Support flat panel timings

Support TFT panels by correctly setting up the flat panel registers

[akpm@osdl.org: cleanups]
Signed-off-by: default avatarJordan Crouse <jordan.crouse@amd.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Acked-by: default avatarJames Simmons <jsimmons@infradead.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent f378819a
......@@ -16,6 +16,10 @@ int gx_line_delta(int xres, int bpp);
extern struct geode_dc_ops gx_dc_ops;
/* MSR that tells us if a TFT or CRT is attached */
#define GLD_MSR_CONFIG 0xC0002001
#define GLD_MSR_CONFIG_FMT_FP 0x01
/* Display controller registers */
#define DC_UNLOCK 0x00
......
......@@ -308,6 +308,7 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
struct geodefb_par *par;
struct fb_info *info;
int ret;
unsigned long val;
info = gxfb_init_fbinfo(&pdev->dev);
if (!info)
......@@ -323,6 +324,15 @@ static int __init gxfb_probe(struct pci_dev *pdev, const struct pci_device_id *i
goto err;
}
/* Figure out if this is a TFT or CRT part */
rdmsrl(GLD_MSR_CONFIG, val);
if (val & GLD_MSR_CONFIG_FMT_FP)
par->enable_crt = 0;
else
par->enable_crt = 1;
ret = fb_find_mode(&info->var, info, mode_option,
gx_modedb, ARRAY_SIZE(gx_modedb), NULL, 16);
if (ret == 0 || ret == 4) {
......
......@@ -175,10 +175,62 @@ static void gx_set_dclk_frequency(struct fb_info *info)
} while (timeout-- && !(dotpll & MSR_GLCP_DOTPLL_LOCK));
}
static void
gx_configure_tft(struct fb_info *info)
{
struct geodefb_par *par = info->par;
unsigned long val;
unsigned long fp;
/* Set up the DF pad select MSR */
rdmsrl(GX_VP_MSR_PAD_SELECT, val);
val &= ~GX_VP_PAD_SELECT_MASK;
val |= GX_VP_PAD_SELECT_TFT;
wrmsrl(GX_VP_MSR_PAD_SELECT, val);
/* Turn off the panel */
fp = readl(par->vid_regs + GX_FP_PM);
fp &= ~GX_FP_PM_P;
writel(fp, par->vid_regs + GX_FP_PM);
/* Set timing 1 */
fp = readl(par->vid_regs + GX_FP_PT1);
fp &= GX_FP_PT1_VSIZE_MASK;
fp |= info->var.yres << GX_FP_PT1_VSIZE_SHIFT;
writel(fp, par->vid_regs + GX_FP_PT1);
/* Timing 2 */
/* Set bits that are always on for TFT */
fp = 0x0F100000;
/* Add sync polarity */
if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
fp |= GX_FP_PT2_VSP;
if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
fp |= GX_FP_PT2_HSP;
writel(fp, par->vid_regs + GX_FP_PT2);
/* Set the dither control */
writel(0x70, par->vid_regs + GX_FP_DFC);
/* Turn on the device */
fp = readl(par->vid_regs + GX_FP_PM);
fp |= GX_FP_PM_P;
writel(fp, par->vid_regs + GX_FP_PM);
}
static void gx_configure_display(struct fb_info *info)
{
struct geodefb_par *par = info->par;
u32 dcfg, fp_pm, misc;
u32 dcfg, misc;
/* Set up the MISC register */
......@@ -222,11 +274,10 @@ static void gx_configure_display(struct fb_info *info)
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on flat panel. */
/* Set up the flat panel (if it is enabled) */
fp_pm = readl(par->vid_regs + GX_FP_PM);
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);
if (par->enable_crt == 0)
gx_configure_tft(info);
}
static int gx_blank_display(struct fb_info *info, int blank_mode)
......@@ -267,12 +318,15 @@ static int gx_blank_display(struct fb_info *info, int blank_mode)
writel(dcfg, par->vid_regs + GX_DCFG);
/* Power on/off flat panel. */
fp_pm = readl(par->vid_regs + GX_FP_PM);
if (blank_mode == FB_BLANK_POWERDOWN)
fp_pm &= ~GX_FP_PM_P;
else
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);
if (par->enable_crt == 0) {
fp_pm = readl(par->vid_regs + GX_FP_PM);
if (blank_mode == FB_BLANK_POWERDOWN)
fp_pm &= ~GX_FP_PM_P;
else
fp_pm |= GX_FP_PM_P;
writel(fp_pm, par->vid_regs + GX_FP_PM);
}
return 0;
}
......
......@@ -13,6 +13,11 @@
extern struct geode_vid_ops gx_vid_ops;
/* GX Flatpanel control MSR */
#define GX_VP_MSR_PAD_SELECT 0x2011
#define GX_VP_PAD_SELECT_MASK 0x3FFFFFFF
#define GX_VP_PAD_SELECT_TFT 0x1FFFFFFF
/* Geode GX video processor registers */
#define GX_DCFG 0x0008
......@@ -36,9 +41,20 @@ extern struct geode_vid_ops gx_vid_ops;
#define GX_MISC_A_PWRDN 0x00000800
/* Geode GX flat panel display control registers */
#define GX_FP_PT1 0x0400
#define GX_FP_PT1_VSIZE_MASK 0x7FF0000
#define GX_FP_PT1_VSIZE_SHIFT 16
#define GX_FP_PT2 0x408
#define GX_FP_PT2_VSP (1 << 23)
#define GX_FP_PT2_HSP (1 << 22)
#define GX_FP_PM 0x410
# define GX_FP_PM_P 0x01000000
#define GX_FP_DFC 0x418
/* Geode GX clock control MSRs */
#define MSR_GLCP_SYS_RSTPLL 0x4c000014
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment