[PATCH] callout removal: sgiserial

callout removal: sgiserial

drivers/sgi/char/sgiserial.c

@@ -97,14 +97,13 @@ static unsigned char zscons_regs[16] = {
 
 DECLARE_TASK_QUEUE(tq_serial);
 
-struct tty_driver serial_driver, callout_driver;
+struct tty_driver serial_driver;
 struct console *sgisercon;
 static int serial_refcount;
 
 /* serial subtype definitions */
 #define SERIAL_TYPE_NORMAL	1
-#define SERIAL_TYPE_CALLOUT	2
-  
+
 /* number of characters left in xmit buffer before we ask for more */
 #define WAKEUP_CHARS 256
 
@@ -1514,8 +1513,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	 */
 	if (info->flags & ZILOG_NORMAL_ACTIVE)
 		info->normal_termios = *tty->termios;
-	if (info->flags & ZILOG_CALLOUT_ACTIVE)
-		info->callout_termios = *tty->termios;
 	/*
 	 * Now we wait for the transmit buffer to clear; and we notify 
 	 * the line discipline to only process XON/XOFF characters.
@@ -1561,8 +1558,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		}
 		wake_up_interruptible(&info->open_wait);
 	}
-	info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CALLOUT_ACTIVE|
-			 ZILOG_CLOSING);
+	info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CLOSING);
 	wake_up_interruptible(&info->close_wait);
 	restore_flags(flags);
 }
@@ -1581,7 +1577,7 @@ void rs_hangup(struct tty_struct *tty)
 	shutdown(info);
 	info->event = 0;
 	info->count = 0;
-	info->flags &= ~(ZILOG_NORMAL_ACTIVE|ZILOG_CALLOUT_ACTIVE);
+	info->flags &= ~ZILOG_NORMAL_ACTIVE;
 	info->tty = 0;
 	wake_up_interruptible(&info->open_wait);
 }
@@ -1614,45 +1610,19 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 	}
 
-	/*
-	 * If this is a callout device, then just make sure the normal
-	 * device isn't being used.
-	 */
-	if (tty->driver->subtype == SERIAL_TYPE_CALLOUT) {
-		if (info->flags & ZILOG_NORMAL_ACTIVE)
-			return -EBUSY;
-		if ((info->flags & ZILOG_CALLOUT_ACTIVE) &&
-		    (info->flags & ZILOG_SESSION_LOCKOUT) &&
-		    (info->session != current->session))
-		    return -EBUSY;
-		if ((info->flags & ZILOG_CALLOUT_ACTIVE) &&
-		    (info->flags & ZILOG_PGRP_LOCKOUT) &&
-		    (info->pgrp != current->pgrp))
-		    return -EBUSY;
-		info->flags |= ZILOG_CALLOUT_ACTIVE;
-		return 0;
-	}
-	
 	/*
 	 * If non-blocking mode is set, or the port is not enabled,
 	 * then make the check up front and then exit.
 	 */
 	if ((filp->f_flags & O_NONBLOCK) ||
 	    (tty->flags & (1 << TTY_IO_ERROR))) {
-		if (info->flags & ZILOG_CALLOUT_ACTIVE)
-			return -EBUSY;
 		info->flags |= ZILOG_NORMAL_ACTIVE;
 		return 0;
 	}
 
-	if (info->flags & ZILOG_CALLOUT_ACTIVE) {
-		if (info->normal_termios.c_cflag & CLOCAL)
-			do_clocal = 1;
-	} else {
-		if (tty->termios->c_cflag & CLOCAL)
-			do_clocal = 1;
-	}
-	
+	if (tty->termios->c_cflag & CLOCAL)
+		do_clocal = 1;
+
 	/*
 	 * Block waiting for the carrier detect and the line to become
 	 * free (i.e., not in use by the callout).  While we are in
@@ -1670,8 +1640,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 	info->blocked_open++;
 	while (1) {
 		cli();
-		if (!(info->flags & ZILOG_CALLOUT_ACTIVE))
-			zs_rtsdtr(info, 1);
+		zs_rtsdtr(info, 1);
 		sti();
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (tty_hung_up_p(filp) ||
@@ -1686,8 +1655,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
 #endif
 			break;
 		}
-		if (!(info->flags & ZILOG_CALLOUT_ACTIVE) &&
-		    !(info->flags & ZILOG_CLOSING) && do_clocal)
+		if (!(info->flags & ZILOG_CLOSING) && do_clocal)
 			break;
 		if (signal_pending(current)) {
 			retval = -ERESTARTSYS;
@@ -1761,10 +1729,7 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 	}
 
 	if ((info->count == 1) && (info->flags & ZILOG_SPLIT_TERMIOS)) {
-		if (tty->driver->subtype == SERIAL_TYPE_NORMAL)
-			*tty->termios = info->normal_termios;
-		else 
-			*tty->termios = info->callout_termios;
+		*tty->termios = info->normal_termios;
 		change_speed(info);
 	}
 
@@ -1776,9 +1741,6 @@ int rs_open(struct tty_struct *tty, struct file * filp)
 		change_speed(info);		
 	}
 
-	info->session = current->session;
-	info->pgrp = current->pgrp;
-
 #ifdef SERIAL_DEBUG_OPEN
 	printk("rs_open %s successful...\n", tty->name);
 #endif
@@ -1899,20 +1861,9 @@ int rs_init(void)
 	serial_driver.start = rs_start;
 	serial_driver.hangup = rs_hangup;
 
-	/*
-	 * The callout device is just like normal device except for
-	 * major number and the subtype code.
-	 */
-	callout_driver = serial_driver;
-	callout_driver.name = "cua";
-	callout_driver.major = TTYAUX_MAJOR;
-	callout_driver.subtype = SERIAL_TYPE_CALLOUT;
-
 	if (tty_register_driver(&serial_driver))
 		panic("Couldn't register serial driver\n");
-	if (tty_register_driver(&callout_driver))
-		panic("Couldn't register callout driver\n");
-	
+
 	save_flags(flags); cli();
 
 	/* Set up our interrupt linked list */
@@ -1999,7 +1950,6 @@ int rs_init(void)
 		info->tqueue.data = info;
 		info->tqueue_hangup.routine = do_serial_hangup;
 		info->tqueue_hangup.data = info;
-		info->callout_termios =callout_driver.init_termios;
 		info->normal_termios = serial_driver.init_termios;
 		init_waitqueue_head(&info->open_wait);
 		init_waitqueue_head(&info->close_wait);

drivers/sgi/char/sgiserial.h

@@ -148,8 +148,6 @@ struct sgi_serial {
 	int			line;
 	int			count;	    /* # of fd on device */
 	int			blocked_open; /* # of blocked opens */
-	long			session; /* Session of opening process */
-	long			pgrp; /* pgrp of opening process */
 	unsigned char 		*xmit_buf;
 	int			xmit_head;
 	int			xmit_tail;
@@ -157,7 +155,6 @@ struct sgi_serial {
 	struct tq_struct	tqueue;
 	struct tq_struct	tqueue_hangup;
 	struct termios		normal_termios;
-	struct termios		callout_termios;
 	wait_queue_head_t	open_wait;
 	wait_queue_head_t	close_wait;
 };