ARM: dts: berlin: Add BG2 ethernet DT nodes

Marvell BG2 has two fast ethernet controllers with internal PHY,
add the corresponding nodes to SoC dtsi.
Tested-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

arch/arm/boot/dts/berlin2.dtsi

@@ -79,11 +79,47 @@ local-timer@ad0600 {
 			clocks = <&chip CLKID_TWD>;
 		};
 
+		eth1: ethernet@b90000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xb90000 0x10000>;
+			clocks = <&chip CLKID_GETH1>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy1>;
+			status = "disabled";
+
+			ethphy1: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
 		cpu-ctrl@dd0000 {
 			compatible = "marvell,berlin-cpu-ctrl";
 			reg = <0xdd0000 0x10000>;
 		};
 
+		eth0: ethernet@e50000 {
+			compatible = "marvell,pxa168-eth";
+			reg = <0xe50000 0x10000>;
+			clocks = <&chip CLKID_GETH0>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			/* set by bootloader */
+			local-mac-address = [00 00 00 00 00 00];
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy-connection-type = "mii";
+			phy-handle = <&ethphy0>;
+			status = "disabled";
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
 		apb@e80000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;