Skip to content

L
linux
Commit af3bf7fb authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt
Browse files
Options

Merge remote-tracking branch 'kumar/next' into next 

Freescale updates for 3.6
parents 10db8d21 b915341b
Hide whitespace changes
Inline Side-by-side
Showing with 1607 additions and 1361 deletions
arch/powerpc/Kconfig
View file @ af3bf7fb
......@@ -653,7 +653,7 @@ config SBUS
config FSL_SOC
bool
select HAVE_CAN_FLEXCAN if NET && CAN
select PPC_CLOCK if CAN_FLEXCAN
select PPC_CLOCK
config FSL_PCI
bool
......
arch/powerpc/boot/Makefile
View file @ af3bf7fb
......@@ -276,7 +276,6 @@ image-$(CONFIG_TQM8548) += cuImage.tqm8548
image-$(CONFIG_TQM8555) += cuImage.tqm8555
image-$(CONFIG_TQM8560) += cuImage.tqm8560
image-$(CONFIG_SBC8548) += cuImage.sbc8548
image-$(CONFIG_SBC8560) += cuImage.sbc8560
image-$(CONFIG_KSI8560) += cuImage.ksi8560
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
......
arch/powerpc/boot/dts/bsc9131rdb.dts 0 → 100644
View file @ af3bf7fb
/*
* BSC9131 RDB Device Tree Source
*
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "fsl/bsc9131si-pre.dtsi"
/ {
model = "fsl,bsc9131rdb";
compatible = "fsl,bsc9131rdb";
memory {
device_type = "memory";
};
board_ifc: ifc: ifc@ff71e000 {
/* NAND Flash on board */
ranges = <0x0 0x0 0x0 0xff800000 0x00004000>;
reg = <0x0 0xff71e000 0x0 0x2000>;
};
board_soc: soc: soc@ff700000 {
ranges = <0x0 0x0 0xff700000 0x100000>;
};
};
/include/ "bsc9131rdb.dtsi"
/include/ "fsl/bsc9131si-post.dtsi"
arch/powerpc/boot/dts/bsc9131rdb.dtsi 0 → 100644
View file @ af3bf7fb
/*
* BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_ifc {
nand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x0 0x0 0x4000>;
partition@0 {
/* This location must not be altered */
/* 3MB for u-boot Bootloader Image */
reg = <0x0 0x00300000>;
label = "NAND U-Boot Image";
read-only;
};
partition@300000 {
/* 1MB for DTB Image */
reg = <0x00300000 0x00100000>;
label = "NAND DTB Image";
};
partition@400000 {
/* 8MB for Linux Kernel Image */
reg = <0x00400000 0x00800000>;
label = "NAND Linux Kernel Image";
};
partition@c00000 {
/* Rest space for Root file System Image */
reg = <0x00c00000 0x07400000>;
label = "NAND RFS Image";
};
};
};
&board_soc {
/* BSC9131RDB does not have any device on i2c@3100 */
i2c@3100 {
status = "disabled";
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <50000000>;
/* 512KB for u-boot Bootloader Image */
partition@0 {
reg = <0x0 0x00080000>;
label = "SPI Flash U-Boot Image";
read-only;
};
/* 512KB for DTB Image */
partition@80000 {
reg = <0x00080000 0x00080000>;
label = "SPI Flash DTB Image";
};
/* 4MB for Linux Kernel Image */
partition@100000 {
reg = <0x00100000 0x00400000>;
label = "SPI Flash Kernel Image";
};
/*11MB for RFS Image */
partition@500000 {
reg = <0x00500000 0x00B00000>;
label = "SPI Flash RFS Image";
};
};
};
usb@22000 {
phy_type = "ulpi";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x3>;
};
};
sdhci@2e000 {
status = "disabled";
};
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi 0 → 100644
View file @ af3bf7fb
/*
* BSC9131 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&ifc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,ifc", "simple-bus";
interrupts = <16 2 0 0 20 2 0 0>;
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,bsc9131-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,bsc9131-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <16 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,bsc9131-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
i2c@3000 {
interrupts = <17 2 0 0>;
};
/include/ "pq3-i2c-1.dtsi"
i2c@3100 {
interrupts = <17 2 0 0>;
};
/include/ "pq3-duart-0.dtsi"
serial0: serial@4500 {
interrupts = <18 2 0 0>;
};
serial1: serial@4600 {
interrupts = <18 2 0 0 >;
};
/include/ "pq3-espi-0.dtsi"
spi0: spi@7000 {
fsl,espi-num-chipselects = <1>;
interrupts = <22 0x2 0 0>;
};
/include/ "pq3-gpio-0.dtsi"
gpio-controller@f000 {
interrupts = <19 0x2 0 0>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,bsc9131-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
dma@21300 {
dma-channel@0 {
interrupts = <62 2 0 0>;
};
dma-channel@80 {
interrupts = <63 2 0 0>;
};
dma-channel@100 {
interrupts = <64 2 0 0>;
};
dma-channel@180 {
interrupts = <65 2 0 0>;
};
};
/include/ "pq3-usb2-dr-0.dtsi"
usb@22000 {
compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
interrupts = <40 0x2 0 0>;
};
/include/ "pq3-esdhc-0.dtsi"
sdhc@2e000 {
fsl,sdhci-auto-cmd12;
interrupts = <41 0x2 0 0>;
};
/include/ "pq3-sec4.4-0.dtsi"
crypto@30000 {
interrupts = <57 2 0 0>;
sec_jr0: jr@1000 {
interrupts = <58 2 0 0>;
};
sec_jr1: jr@2000 {
interrupts = <59 2 0 0>;
};
sec_jr2: jr@3000 {
interrupts = <60 2 0 0>;
};
sec_jr3: jr@4000 {
interrupts = <61 2 0 0>;
};
};
/include/ "pq3-mpic.dtsi"
timer@41100 {
compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg";
reg = <0x41400 0x200>;
interrupts = <
0xb0 2
0xb1 2
0xb2 2
0xb3 2>;
};
/include/ "pq3-etsec2-0.dtsi"
enet0: ethernet@b0000 {
queue-group@b0000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
};
};
/include/ "pq3-etsec2-1.dtsi"
enet1: ethernet@b1000 {
queue-group@b1000 {
fsl,rx-bit-map = <0xff>;
fsl,tx-bit-map = <0xff>;
interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
};
};
global-utilities@e0000 {
compatible = "fsl,bsc9131-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
arch/powerpc/boot/dts/fsl/p3060si-pre.dtsi → arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi
View file @ af3bf7fb
/*
* P3060 Silicon/SoC Device Tree Source (pre include)
* BSC9131 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -34,92 +34,26 @@
/dts-v1/;
/ {
compatible = "fsl,P3060";
compatible = "fsl,BSC9131";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ccsr = &soc;
dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
pci1 = &pci1;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0;
dma1 = &dma1;
msi0 = &msi0;
msi1 = &msi1;
msi2 = &msi2;
crypto = &crypto;
sec_jr0 = &sec_jr0;
sec_jr1 = &sec_jr1;
sec_jr2 = &sec_jr2;
sec_jr3 = &sec_jr3;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
ethernet0 = &enet0;
ethernet1 = &enet1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
next-level-cache = <&L2_4>;
L2_4: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
next-level-cache = <&L2_5>;
L2_5: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
next-level-cache = <&L2_6>;
L2_6: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu7: PowerPC,e500mc@7 {
PowerPC,BSC9131@0 {
device_type = "cpu";
reg = <7>;
next-level-cache = <&L2_7>;
L2_7: l2-cache {
next-level-cache = <&cpc>;
};
compatible = "fsl,e500v2";
reg = <0x0>;
next-level-cache = <&L2>;
};
};
};
arch/powerpc/boot/dts/fsl/p1021si-post.dtsi
View file @ af3bf7fb
/*
* P1021/P1012 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -213,6 +213,20 @@ ucc@2400 {
interrupt-parent = <&qeic>;
};
ucc@2600 {
cell-index = <7>;
reg = <0x2600 0x200>;
interrupts = <42>;
interrupt-parent = <&qeic>;
};
ucc@2200 {
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
......
arch/powerpc/boot/dts/fsl/p3060si-post.dtsi deleted 100644 → 0
View file @ 10db8d21
/*
* P3060 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
#address-cells = <2>;
#size-cells = <1>;
};
/* controller at 0x200000 */
&pci0 {
compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 15>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
/* controller at 0x201000 */
&pci1 {
compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 14>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
&rio {
compatible = "fsl,srio";
interrupts = <16 2 1 11>;
#address-cells = <2>;
#size-cells = <2>;
fsl,srio-rmu-handle = <&rmu>;
ranges;
port1 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <1>;
};
port2 {
#address-cells = <2>;
#size-cells = <2>;
cell-index = <2>;
};
};
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,dcsr-npc";
reg = <0x1000 0x1000 0x1000000 0x8000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0xB0000 0x1000>;
};
dcsr-dpaa@9000 {
compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
reg = <0x9000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr1>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-cpu-sb-proxy@40000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x40000 0x1000>;
};
dcsr-cpu-sb-proxy@41000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x41000 0x1000>;
};
dcsr-cpu-sb-proxy@44000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu4>;
reg = <0x44000 0x1000>;
};
dcsr-cpu-sb-proxy@45000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu5>;
reg = <0x45000 0x1000>;
};
dcsr-cpu-sb-proxy@46000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu6>;
reg = <0x46000 0x1000>;
};
dcsr-cpu-sb-proxy@47000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu7>;
reg = <0x47000 0x1000>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <32>;
};
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,p3060-l3-cache-controller", "cache";
reg = <0x10000 0x1000
0x11000 0x1000>;
interrupts = <16 2 1 27
16 2 1 26>;
};
corenet-cf@18000 {
compatible = "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
fsl,ccf-num-snoopids = <32>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x5000>;
interrupts = <
24 2 0 0
16 2 1 30>;
};
/include/ "qoriq-rmu-0.dtsi"
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <1>;
fsl,liodn-bits = <12>;
};
pins: global-utilities@e0e00 {
compatible = "fsl,qoriq-pin-control-1.0";
reg = <0xe0e00 0x200>;
#sleep-cells = <2>;
};
clockgen: global-utilities@e1000 {
compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
};
rcpm: global-utilities@e2000 {
compatible = "fsl,qoriq-rcpm-1.0";
reg = <0xe2000 0x1000>;
#sleep-cells = <1>;
};
sfp: sfp@e8000 {
compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,p3060-serdes";
reg = <0xea000 0x1000>;
};
/include/ "qoriq-dma-0.dtsi"
/include/ "qoriq-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb@210000 {
compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb@211000 {
compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
};
/include/ "qoriq-sec4.1-0.dtsi"
};
arch/powerpc/boot/dts/mgcoge.dts
View file @ af3bf7fb
......@@ -222,6 +222,29 @@ usb@11b60 {
interrupt-parent = <&PIC>;
usb-clock = <5>;
};
spi@11aa0 {
cell-index = <0>;
compatible = "fsl,spi", "fsl,cpm2-spi";
reg = <0x11a80 0x40 0x89fc 0x2>;
interrupts = <2 8>;
interrupt-parent = <&PIC>;
gpios = < &cpm2_pio_d 19 0>;
#address-cells = <1>;
#size-cells = <0>;
ds3106@1 {
compatible = "gen,spidev";
reg = <0>;
spi-max-frequency = <8000000>;
};
};
};
cpm2_pio_d: gpio-controller@10d60 {
#gpio-cells = <2>;
compatible = "fsl,cpm2-pario-bank";
reg = <0x10d60 0x14>;
gpio-controller;
};
cpm2_pio_c: gpio-controller@10d40 {
......
arch/powerpc/boot/dts/mpc8536ds.dtsi
View file @ af3bf7fb
......@@ -203,6 +203,14 @@ phy1: ethernet-phy@1 {
reg = <1>;
device_type = "ethernet-phy";
};
sgmii_phy0: sgmii-phy@0 {
interrupts = <6 1 0 0>;
reg = <0x1d>;
};
sgmii_phy1: sgmii-phy@1 {
interrupts = <6 1 0 0>;
reg = <0x1c>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
......
arch/powerpc/boot/dts/mpc8544ds.dtsi
View file @ af3bf7fb
......@@ -51,6 +51,15 @@ phy1: ethernet-phy@1 {
device_type = "ethernet-phy";
};
sgmii_phy0: sgmii-phy@0 {
interrupts = <6 1 0 0>;
reg = <0x1c>;
};
sgmii_phy1: sgmii-phy@1 {
interrupts = <6 1 0 0>;
reg = <0x1d>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
......
arch/powerpc/boot/dts/mpc8572ds.dtsi
View file @ af3bf7fb
......@@ -169,6 +169,23 @@ phy3: ethernet-phy@3 {
reg = <0x3>;
};
sgmii_phy0: sgmii-phy@0 {
interrupts = <6 1 0 0>;
reg = <0x1c>;
};
sgmii_phy1: sgmii-phy@1 {
interrupts = <6 1 0 0>;
reg = <0x1d>;
};
sgmii_phy2: sgmii-phy@2 {
interrupts = <7 1 0 0>;
reg = <0x1e>;
};
sgmii_phy3: sgmii-phy@3 {
interrupts = <7 1 0 0>;
reg = <0x1f>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
......
arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
View file @ af3bf7fb
......@@ -67,10 +67,10 @@ pic@40000 {
msi@41600 {
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
0xe0 0 0 0
0xe1 0 0 0
0xe2 0 0 0
0xe3 0 0 0>;
};
timer@42100 {
status = "disabled";
......
arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
View file @ af3bf7fb
......@@ -67,9 +67,6 @@ dma@21300 {
ethernet@24000 {
status = "disabled";
};
mdio@24520 {
status = "disabled";
};
ptp_clock@24e00 {
status = "disabled";
};
......@@ -100,10 +97,10 @@ timer@41100 {
msi@41600 {
msi-available-ranges = <0x80 0x80>;
interrupts = <
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
0xe4 0 0 0
0xe5 0 0 0
0xe6 0 0 0
0xe7 0 0 0>;
};
global-utilities@e0000 {
status = "disabled";
......
arch/powerpc/boot/dts/p1010rdb.dtsi
View file @ af3bf7fb
......@@ -126,12 +126,24 @@ cpld@3,0 {
&board_soc {
i2c@3000 {
eeprom@50 {
compatible = "st,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
i2c@3100 {
eeprom@52 {
compatible = "atmel,24c01";
reg = <0x52>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
......
arch/powerpc/boot/dts/p1021rdb.dtsi → arch/powerpc/boot/dts/p1021rdb-pc.dtsi
View file @ af3bf7fb
/*
* P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......
arch/powerpc/boot/dts/p1021rdb.dts → arch/powerpc/boot/dts/p1021rdb-pc_32b.dts
View file @ af3bf7fb
/*
* P1021 RDB Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -92,5 +92,5 @@ qe: qe@ffe80000 {
};
};
/include/ "p1021rdb.dtsi"
/include/ "p1021rdb-pc.dtsi"
/include/ "fsl/p1021si-post.dtsi"
arch/powerpc/boot/dts/p1021rdb_36b.dts → arch/powerpc/boot/dts/p1021rdb-pc_36b.dts
View file @ af3bf7fb
/*
* P1021 RDB Device Tree Source (36-bit address map)
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -92,5 +92,5 @@ qe: qe@fffe80000 {
};
};
/include/ "p1021rdb.dtsi"
/include/ "p1021rdb-pc.dtsi"
/include/ "fsl/p1021si-post.dtsi"
arch/powerpc/boot/dts/p1022ds.dtsi
View file @ af3bf7fb
......@@ -33,22 +33,6 @@
*/
&board_lbc {
/*
* This node is used to access the pixis via "indirect" mode,
* which is done by writing the pixis register index to chip
* select 0 and the value to/from chip select 1. Indirect
* mode is the only way to access the pixis when DIU video
* is enabled. Note that this assumes that the first column
* of the 'ranges' property above is the chip select number.
*/
board-control@0,0 {
compatible = "fsl,p1022ds-indirect-pixis";
reg = <0x0 0x0 1 /* CS0 */
0x1 0x0 1>; /* CS1 */
interrupt-parent = <&mpic>;
interrupts = <8 0 0 0>;
};
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
......@@ -161,6 +145,10 @@ wm8776:codec@1a {
* the clock is enabled.
*/
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
spi@7000 {
......
arch/powerpc/boot/dts/p3060qds.dts → arch/powerpc/boot/dts/p1024rdb.dtsi
View file @ af3bf7fb
/*
* P3060QDS Device Tree Source
* P1024 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
......@@ -32,211 +32,197 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p3060si-pre.dtsi"
/ {
model = "fsl,P3060QDS";
compatible = "fsl,P3060QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
};
&lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x1000000>;
bank-width = <2>;
device-width = <1>;
partition@0 {
/* This location must not be altered */
/* 256KB for Vitesse 7385 Switch firmware */
reg = <0x0 0x00040000>;
label = "NOR Vitesse-7385 Firmware";
read-only;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@kernel {
label = "kernel";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@dtb {
label = "dtb";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@fs {
label = "file system";
reg = <0x00700000 0x00900000>;
};
};
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,en25q32b";
reg = <1>;
spi-max-frequency = <40000000>; /* input clock */
partition@spi1 {
label = "spi1";
reg = <0x00000000 0x00400000>;
};
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at45db081d";
reg = <2>;
spi-max-frequency = <40000000>; /* input clock */
partition@spi1 {
label = "spi2";
reg = <0x00000000 0x00100000>;
};
};
flash@3 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,sst25wf040";
reg = <3>;
spi-max-frequency = <40000000>; /* input clock */
partition@spi3 {
label = "spi3";
reg = <0x00000000 0x00080000>;
};
};
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
i2c@118000 {
eeprom@51 {
compatible = "at24,24c256";
reg = <0x51>;
};
eeprom@53 {
compatible = "at24,24c256";
reg = <0x53>;
};
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
partition@80000 {
/* 3.5 MB for Linux Kernel Image */
reg = <0x00080000 0x00380000>;
label = "NOR Linux Kernel Image";
};
usb0: usb@210000 {
phy_type = "ulpi";
partition@400000 {
/* 11MB for JFFS2 based Root file System */
reg = <0x00400000 0x00b00000>;
label = "NOR JFFS2 Root File System";
};
usb1: usb@211000 {
dr_mode = "host";
phy_type = "ulpi";
partition@f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x00f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1020-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
};
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xffa00000 0x00040000
3 0 0xf 0xffdf0000 0x00008000>;
partition@a00000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00f00000>;
label = "NAND JFFS2 Root File System";
};
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x08000000>;
bank-width = <2>;
device-width = <2>;
partition@1900000 {
/* 7MB for User Writable Area */
reg = <0x01900000 0x00700000>;
label = "NAND Writable User area";
};
};
};
nand@2,0 {
&soc {
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
compatible = "spansion,m25p80";
reg = <0>;
spi-max-frequency = <40000000>;
partition@0 {
label = "NAND U-Boot Image";
reg = <0x0 0x02000000>;
/* 512KB for u-boot Bootloader Image */
reg = <0x0 0x00080000>;
label = "SPI U-Boot Image";
read-only;
};
partition@2000000 {
label = "NAND Root File System";
reg = <0x02000000 0x10000000>;
partition@80000 {
/* 512KB for DTB Image */
reg = <0x00080000 0x00080000>;
label = "SPI DTB Image";
};
partition@12000000 {
label = "NAND Compressed RFS Image";
reg = <0x12000000 0x08000000>;
partition@100000 {
/* 4MB for Linux Kernel Image */
reg = <0x00100000 0x00400000>;
label = "SPI Linux Kernel Image";
};
partition@1a000000 {
label = "NAND Linux Kernel Image";
reg = <0x1a000000 0x04000000>;
partition@500000 {
/* 4MB for Compressed RFS Image */
reg = <0x00500000 0x00400000>;
label = "SPI Compressed RFS Image";
};
partition@1e000000 {
label = "NAND DTB Image";
reg = <0x1e000000 0x01000000>;
};
partition@1f000000 {
label = "NAND Writable User area";
reg = <0x1f000000 0x21000000>;
partition@900000 {
/* 7MB for JFFS2 based RFS */
reg = <0x00900000 0x00700000>;
label = "SPI JFFS2 RFS";
};
};
};
board-control@3,0 {
compatible = "fsl,p3060qds-fpga", "fsl,fpga-qixis";
reg = <3 0 0x100>;
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
pci0: pcie@ffe200000 {
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
usb@22000 {
phy_type = "ulpi";
};
usb@23000 {
status = "disabled";
};
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupts = <1 1 0 0>;
reg = <0x2>;
};
};
pci1: pcie@ffe201000 {
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
mdio@25000 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
mdio@26000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
/include/ "fsl/p3060si-post.dtsi"
ethernet@b0000 {
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
ethernet@b1000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
};
ethernet@b2000 {
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
};
arch/powerpc/boot/dts/p1024rdb_32b.dts 0 → 100644
View file @ af3bf7fb
/*
* P1024 RDB 32Bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1024RDB";
compatible = "fsl,P1024RDB";
memory {
device_type = "memory";
};
lbc: localbus@ffe05000 {
reg = <0x0 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000>;
};
soc: soc@ffe00000 {
ranges = <0x0 0x0 0xffe00000 0x100000>;
};
pci0: pcie@ffe09000 {
reg = <0x0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@ffe0a000 {
reg = <0x0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1024rdb.dtsi"
/include/ "fsl/p1020si-post.dtsi"
arch/powerpc/boot/dts/p1024rdb_36b.dts 0 → 100644
View file @ af3bf7fb
/*
* P1024 RDB 36Bit Physical Address Map Device Tree Source
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/p1020si-pre.dtsi"
/ {
model = "fsl,P1024RDB";
compatible = "fsl,P1024RDB";
memory {
device_type = "memory";
};
lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xef000000 0x01000000
0x1 0x0 0xf 0xff800000 0x00040000>;
};
soc: soc@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
};
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};
/include/ "p1024rdb.dtsi"
/include/ "fsl/p1020si-post.dtsi"
arch/powerpc/boot/dts/p1025rdb.dtsi
View file @ af3bf7fb
......@@ -282,5 +282,45 @@ pio2: ucc_pin@02 {
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
};
pio3: ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/
0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/
0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/
0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/
0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/
};
pio4: ucc_pin@04 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/
0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/
0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/
0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/
0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/
};
};
};
&qe {
serial2: ucc@2600 {
device_type = "serial";
compatible = "ucc_uart";
port-number = <0>;
rx-clock-name = "brg6";
tx-clock-name = "brg6";
pio-handle = <&pio3>;
};
serial3: ucc@2200 {
device_type = "serial";
compatible = "ucc_uart";
port-number = <1>;
rx-clock-name = "brg2";
tx-clock-name = "brg2";
pio-handle = <&pio4>;
};
};
arch/powerpc/boot/dts/p2020ds.dtsi
View file @ af3bf7fb
......@@ -150,6 +150,16 @@ phy2: ethernet-phy@2 {
interrupts = <3 1 0 0>;
reg = <0x2>;
};
sgmii_phy1: sgmii-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1c>;
};
sgmii_phy2: sgmii-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x1d>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
......
arch/powerpc/boot/dts/p2020rdb.dts
View file @ af3bf7fb
......@@ -34,7 +34,7 @@ lbc: localbus@ffe05000 {
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0x1 0x0 0x0 0xff800000 0x00040000
0x1 0x0 0x0 0xffa00000 0x00040000
0x2 0x0 0x0 0xffb00000 0x00020000>;
nor@0,0 {
......
arch/powerpc/boot/dts/p2041rdb.dts
View file @ af3bf7fb
......@@ -121,7 +121,8 @@ port2 {
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
1 0 0xf 0xffa00000 0x00040000>;
flash@0,0 {
compatible = "cfi-flash";
......@@ -129,6 +130,44 @@ flash@0,0 {
bank-width = <2>;
device-width = <2>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
label = "NAND U-Boot Image";
reg = <0x0 0x02000000>;
read-only;
};
partition@2000000 {
label = "NAND Root File System";
reg = <0x02000000 0x10000000>;
};
partition@12000000 {
label = "NAND Compressed RFS Image";
reg = <0x12000000 0x08000000>;
};
partition@1a000000 {
label = "NAND Linux Kernel Image";
reg = <0x1a000000 0x04000000>;
};
partition@1e000000 {
label = "NAND DTB Image";
reg = <0x1e000000 0x01000000>;
};
partition@1f000000 {
label = "NAND Writable User area";
reg = <0x1f000000 0x01000000>;
};
};
};
pci0: pcie@ffe200000 {
......
arch/powerpc/boot/dts/sbc8560.dts deleted 100644 → 0
View file @ 10db8d21
/*
* SBC8560 Device Tree Source
*
* Copyright 2007 Wind River Systems Inc.
*
* Paul Gortmaker (see MAINTAINERS for contact information)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "SBC8560";
compatible = "SBC8560";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8560@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <0x20>; // 32 bytes
i-cache-line-size = <0x20>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>; // From uboot
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
soc@ff700000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x0 0xff700000 0x00100000>;
clock-frequency = <0>;
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <8>;
};
ecm@1000 {
compatible = "fsl,mpc8560-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8560-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <0x12 0x2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8560-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; // 32 bytes
cache-size = <0x40000>; // L2, 256K
interrupt-parent = <&mpic>;
interrupts = <0x10 0x2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8560-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8560-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8560-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8560-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@1b {
interrupt-parent = <&mpic>;
interrupts = <0x8 0x1>;
reg = <0x1b>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@1c {
interrupt-parent = <&mpic>;
interrupts = <0x8 0x1>;
reg = <0x1c>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,open-pic";
reg = <0x40000 0x40000>;
device_type = "open-pic";
};
cpm@919c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
reg = <0x919c0 0x30>;
ranges;
muram@80000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x80000 0x10000>;
data@0 {
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x4000 0x9000 0x2000>;
};
};
brg@919f0 {
compatible = "fsl,mpc8560-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x919f0 0x10 0x915f0 0x10>;
clock-frequency = <165000000>;
};
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x2e 0x2>;
interrupt-parent = <&mpic>;
reg = <0x90c00 0x80>;
compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
};
enet2: ethernet@91320 {
device_type = "network";
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
fsl,cpm-command = <0x16200300>;
interrupts = <0x21 0x8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
enet3: ethernet@91340 {
device_type = "network";
compatible = "fsl,mpc8560-fcc-enet",
"fsl,cpm2-fcc-enet";
reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
fsl,cpm-command = <0x1a400300>;
interrupts = <0x22 0x8>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
};
global-utilities@e0000 {
compatible = "fsl,mpc8560-guts";
reg = <0xe0000 0x1000>;
};
};
pci0: pci@ff708000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
reg = <0xff708000 0x1000>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x02 */
0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
interrupt-parent = <&mpic>;
interrupts = <0x18 0x2>;
bus-range = <0x0 0x0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
};
localbus@ff705000 {
compatible = "fsl,mpc8560-localbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xff705000 0x100>; // BRx, ORx, etc.
ranges = <
0x0 0x0 0xff800000 0x0800000 // 8MB boot flash
0x1 0x0 0xe4000000 0x4000000 // 64MB flash
0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM
0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM
0x5 0x0 0xfc000000 0x0c00000 // EPLD
0x6 0x0 0xe0000000 0x4000000 // 64MB flash
0x7 0x0 0x80000000 0x0200000 // ATM1,2
>;
epld@5,0 {
compatible = "wrs,epld-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0x5 0x0 0xc00000>;
ranges = <
0x0 0x0 0x5 0x000000 0x1fff // LED disp.
0x1 0x0 0x5 0x100000 0x1fff // switches
0x2 0x0 0x5 0x200000 0x1fff // ID reg.
0x3 0x0 0x5 0x300000 0x1fff // status reg.
0x4 0x0 0x5 0x400000 0x1fff // reset reg.
0x5 0x0 0x5 0x500000 0x1fff // Wind port
0x7 0x0 0x5 0x700000 0x1fff // UART #1
0x8 0x0 0x5 0x800000 0x1fff // UART #2
0x9 0x0 0x5 0x900000 0x1fff // RTC
0xb 0x0 0x5 0xb00000 0x1fff // EEPROM
>;
bidr@2,0 {
compatible = "wrs,sbc8560-bidr";
reg = <0x2 0x0 0x10>;
};
bcsr@3,0 {
compatible = "wrs,sbc8560-bcsr";
reg = <0x3 0x0 0x10>;
};
brstcr@4,0 {
compatible = "wrs,sbc8560-brstcr";
reg = <0x4 0x0 0x10>;
};
serial0: serial@7,0 {
device_type = "serial";
compatible = "ns16550";
reg = <0x7 0x0 0x100>;
clock-frequency = <1843200>;
interrupts = <0x9 0x2>;
interrupt-parent = <&mpic>;
};
serial1: serial@8,0 {
device_type = "serial";
compatible = "ns16550";
reg = <0x8 0x0 0x100>;
clock-frequency = <1843200>;
interrupts = <0xa 0x2>;
interrupt-parent = <&mpic>;
};
rtc@9,0 {
compatible = "m48t59";
reg = <0x9 0x0 0x1fff>;
};
};
};
};
arch/powerpc/configs/83xx/kmeter1_defconfig
View file @ af3bf7fb
......@@ -2,14 +2,14 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SPARSE_IRQ=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
......@@ -31,11 +31,10 @@ CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_TIPC=y
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......@@ -50,17 +49,15 @@ CONFIG_MTD_UBI_DEBUG=y
CONFIG_PROC_DEVICETREE=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_TUN=y
CONFIG_MII=y
CONFIG_MARVELL_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_TUN=y
CONFIG_UCC_GETH=y
# CONFIG_NETDEV_10000 is not set
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_MARVELL_PHY=y
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=y
CONFIG_WAN=y
CONFIG_HDLC=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
......@@ -77,10 +74,7 @@ CONFIG_UIO=y
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
arch/powerpc/configs/85xx/sbc8560_defconfig deleted 100644 → 0
View file @ 10db8d21
CONFIG_PPC_85xx=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EXPERT=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_SBC8560=y
CONFIG_BINFMT_MISC=y
CONFIG_SPARSE_IRQ=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_NETDEVICES=y
CONFIG_BROADCOM_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_GIANFAR=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_HW_RANDOM is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_M48T59=y
CONFIG_INOTIFY=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_MSDOS_PARTITION is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
arch/powerpc/configs/corenet32_smp_defconfig
View file @ af3bf7fb
......@@ -23,7 +23,6 @@ CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_P2041_RDB=y
CONFIG_P3041_DS=y
CONFIG_P3060_QDS=y
CONFIG_P4080_DS=y
CONFIG_P5020_DS=y
CONFIG_HIGHMEM=y
......@@ -32,10 +31,12 @@ CONFIG_HIGH_RES_TIMERS=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_BINFMT_MISC=m
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_FSL_LBC=y
CONFIG_PCI=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
# CONFIG_PCIEASPM is not set
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
......@@ -76,6 +77,11 @@ CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
......@@ -136,6 +142,8 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_OF=y
CONFIG_MMC_SDHCI_OF_ESDHC=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
......
arch/powerpc/configs/corenet64_smp_defconfig
View file @ af3bf7fb
......@@ -6,7 +6,9 @@ CONFIG_NR_CPUS=2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SPARSE_IRQ=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
......@@ -18,11 +20,14 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_P5020_DS=y
# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_IRQ_ALL_CPUS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
CONFIG_FSL_RIO=y
CONFIG_NET=y
......@@ -51,12 +56,25 @@ CONFIG_INET_ESP=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_LEGACY=y
CONFIG_ATA=y
CONFIG_SATA_FSL=y
CONFIG_SATA_SIL24=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_INPUT_FF_MEMLESS=m
......@@ -66,39 +84,59 @@ CONFIG_INPUT_FF_MEMLESS=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MPC=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_FSL_SPI=y
CONFIG_SPI_FSL_ESPI=y
# CONFIG_HWMON is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_USB_HID=m
CONFIG_USB=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_FSL=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_DMADEVICES=y
CONFIG_FSL_DMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_NLS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_AES=y
......
arch/powerpc/configs/mgcoge_defconfig
View file @ af3bf7fb
......@@ -2,7 +2,6 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_SPARSE_IRQ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
......@@ -12,6 +11,7 @@ CONFIG_KALLSYMS_ALL=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PARTITION_ADVANCED=y
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_PMAC is not set
CONFIG_PPC_82xx=y
......@@ -49,12 +49,9 @@ CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_FIXED_PHY=y
CONFIG_NET_ETHERNET=y
CONFIG_FS_ENET=y
CONFIG_FS_ENET_MDIO_FCC=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_FIXED_PHY=y
# CONFIG_WLAN is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
......@@ -64,6 +61,8 @@ CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_CPM=y
CONFIG_SPI=y
CONFIG_SPI_FSL_SPI=y
# CONFIG_HWMON is not set
CONFIG_USB_GADGET=y
CONFIG_USB_FSL_USB2=y
......@@ -80,8 +79,6 @@ CONFIG_SQUASHFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
......@@ -90,7 +87,6 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_BDI_SWITCH=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_PCBC=y
......
arch/powerpc/configs/mpc85xx_defconfig
View file @ af3bf7fb
......@@ -74,6 +74,30 @@ CONFIG_INET_ESP=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_FTL=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
......
arch/powerpc/configs/mpc85xx_smp_defconfig
View file @ af3bf7fb
......@@ -46,6 +46,7 @@ CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PCI=y
CONFIG_PCI_MSI=y
......@@ -76,6 +77,30 @@ CONFIG_INET_ESP=y
CONFIG_IPV6=y
CONFIG_IP_SCTP=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_FTL=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_FSL_ELBC=y
CONFIG_MTD_NAND_FSL_IFC=y
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_M25P80=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
......
arch/powerpc/include/asm/immap_qe.h
View file @ af3bf7fb
......@@ -26,7 +26,9 @@
struct qe_iram {
__be32 iadd; /* I-RAM Address Register */
__be32 idata; /* I-RAM Data Register */
u8 res0[0x78];
u8 res0[0x04];
__be32 iready; /* I-RAM Ready Register */
u8 res1[0x70];
} __attribute__ ((packed));
/* QE Interrupt Controller */
......
arch/powerpc/include/asm/qe.h
View file @ af3bf7fb
......@@ -499,6 +499,7 @@ enum comm_dir {
/* I-RAM */
#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
#define QE_IRAM_READY 0x80000000 /* Ready */
/* UPC */
#define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */
......
arch/powerpc/kernel/head_fsl_booke.S
View file @ af3bf7fb
......@@ -556,8 +556,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
/* SPE Unavailable */
START_EXCEPTION(SPEUnavailable)
NORMAL_EXCEPTION_PROLOG(SPE_UNAVAIL)
bne load_up_spe
addi r3,r1,STACK_FRAME_OVERHEAD
beq 1f
bl load_up_spe
b fast_exception_return
1: addi r3,r1,STACK_FRAME_OVERHEAD
EXC_XFER_EE_LITE(0x2010, KernelSPE)
#else
EXCEPTION(0x2020, SPE_UNAVAIL, SPEUnavailable, \
......@@ -778,7 +780,7 @@ tlb_write_entry:
/* Note that the SPE support is closely modeled after the AltiVec
* support. Changes to one are likely to be applicable to the
* other! */
load_up_spe:
_GLOBAL(load_up_spe)
/*
* Disable SPE for the task which had SPE previously,
* and save its SPE registers in its thread_struct.
......@@ -826,20 +828,7 @@ load_up_spe:
subi r4,r5,THREAD
stw r4,last_task_used_spe@l(r3)
#endif /* !CONFIG_SMP */
/* restore registers and return */
2: REST_4GPRS(3, r11)
lwz r10,_CCR(r11)
REST_GPR(1, r11)
mtcr r10
lwz r10,_LINK(r11)
mtlr r10
REST_GPR(10, r11)
mtspr SPRN_SRR1,r9
mtspr SPRN_SRR0,r12
REST_GPR(9, r11)
REST_GPR(12, r11)
lwz r11,GPR11(r11)
rfi
blr
/*
* SPE unavailable trap from kernel - print a message, but let
......
arch/powerpc/kernel/setup-common.c
View file @ af3bf7fb
......@@ -720,6 +720,33 @@ static int powerpc_debugfs_init(void)
arch_initcall(powerpc_debugfs_init);
#endif
#ifdef CONFIG_BOOKE_WDT
extern u32 booke_wdt_enabled;
extern u32 booke_wdt_period;
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period(char *p)
{
unsigned long ret;
if (p) {
if (!kstrtol(p, 0, &ret))
booke_wdt_period = ret;
}
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
void ppc_printk_progress(char *s, unsigned short hex)
{
pr_info("%s\n", s);
......
arch/powerpc/kernel/setup_32.c
View file @ af3bf7fb
......@@ -149,30 +149,6 @@ notrace void __init machine_init(u64 dt_ptr)
ppc_md.progress("id mach(): done", 0x200);
}
#ifdef CONFIG_BOOKE_WDT
extern u32 booke_wdt_enabled;
extern u32 booke_wdt_period;
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period (char *p)
{
if (p)
booke_wdt_period = simple_strtoul(p, NULL, 0);
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
......
arch/powerpc/platforms/82xx/km82xx.c
View file @ af3bf7fb
......@@ -128,6 +128,11 @@ static __initdata struct cpm_pin km82xx_pins[] = {
{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXP */
{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY}, /* TXN */
{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* RXD */
/* SPI */
{3, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MISO PD16 */
{3, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_MOSI PD17 */
{3, 18, CPM_PIN_INPUT | CPM_PIN_SECONDARY},/* SPI_CLK PD18 */
};
static void __init init_ioports(void)
......
arch/powerpc/platforms/83xx/km83xx.c
View file @ af3bf7fb
......@@ -3,7 +3,7 @@
* Author: Heiko Schocher <hs@denx.de>
*
* Description:
* Keymile KMETER1 board specific routines.
* Keymile 83xx platform specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -70,54 +70,88 @@ static void __init mpc83xx_km_setup_arch(void)
for_each_node_by_name(np, "spi")
par_io_of_config(np);
for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
for_each_node_by_name(np, "ucc")
par_io_of_config(np);
}
np = of_find_compatible_node(NULL, "network", "ucc_geth");
if (np != NULL) {
uint svid;
/*
* handle mpc8360E Erratum QE_ENET10:
* RGMII AC values do not meet the specification
*/
uint svid = mfspr(SPRN_SVR);
struct device_node *np_par;
struct resource res;
void __iomem *base;
int ret;
np_par = of_find_node_by_name(NULL, "par_io");
if (np_par == NULL) {
printk(KERN_WARNING "%s couldn;t find par_io node\n",
__func__);
return;
}
/* Map Parallel I/O ports registers */
ret = of_address_to_resource(np_par, 0, &res);
if (ret) {
printk(KERN_WARNING "%s couldn;t map par_io registers\n",
__func__);
return;
}
base = ioremap(res.start, res.end - res.start + 1);
/*
* set output delay adjustments to default values according
* table 5 in Errata Rev. 5, 9/2011:
*
* write 0b01 to UCC1 bits 18:19
* write 0b01 to UCC2 option 1 bits 4:5
* write 0b01 to UCC2 option 2 bits 16:17
*/
clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);
/*
* set output delay adjustments to default values according
* table 3-13 in Reference Manual Rev.3 05/2010:
*
* write 0b01 to UCC2 option 2 bits 16:17
* write 0b0101 to UCC1 bits 20:23
* write 0b0101 to UCC2 option 1 bits 24:27
*/
clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);
/* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
svid = mfspr(SPRN_SVR);
if (SVR_REV(svid) == 0x0021) {
struct device_node *np_par;
struct resource res;
void __iomem *base;
int ret;
np_par = of_find_node_by_name(NULL, "par_io");
if (np_par == NULL) {
printk(KERN_WARNING "%s couldn;t find par_io node\n",
__func__);
return;
}
/* Map Parallel I/O ports registers */
ret = of_address_to_resource(np_par, 0, &res);
if (ret) {
printk(KERN_WARNING "%s couldn;t map par_io registers\n",
__func__);
return;
}
base = ioremap(res.start, resource_size(&res));
/*
* UCC2 option 1: write 0b1010 to bits 24:27
* at address IMMRBAR+0x14AC
*/
clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
} else if (SVR_REV(svid) == 0x0020) {
/*
* UCC1: write 0b11 to bits 18:19
* at address IMMRBAR+0x14A8
*/
setbits32((base + 0xa8), 0x00003000);
/*
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
* UCC2 option 1: write 0b11 to bits 4:5
* at address IMMRBAR+0x14A8
*/
setbits32((base + 0xa8), 0x0c003000);
setbits32((base + 0xa8), 0x0c000000);
/*
* IMMR + 0x14AC[20:27] = 10101010
* (data delay for both UCC's)
* UCC2 option 2: write 0b11 to bits 16:17
* at address IMMRBAR+0x14AC
*/
clrsetbits_be32((base + 0xac), 0xff0, 0xaa0);
iounmap(base);
of_node_put(np_par);
setbits32((base + 0xac), 0x0000c000);
}
iounmap(base);
of_node_put(np_par);
of_node_put(np);
}
#endif /* CONFIG_QUICC_ENGINE */
#endif /* CONFIG_QUICC_ENGINE */
}
machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);
......
arch/powerpc/platforms/85xx/Kconfig
View file @ af3bf7fb
......@@ -23,6 +23,15 @@ config FSL_85XX_CACHE_SRAM
cache-sram-size and cache-sram-offset kernel boot
parameters should be passed when this option is enabled.
config BSC9131_RDB
bool "Freescale BSC9131RDB"
select DEFAULT_UIMAGE
help
This option enables support for the Freescale BSC9131RDB board.
The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
StarCore SC3850 DSP
Manufacturer : Freescale Semiconductor, Inc
config MPC8540_ADS
bool "Freescale MPC8540 ADS"
select DEFAULT_UIMAGE
......@@ -175,12 +184,6 @@ config SBC8548
help
This option enables support for the Wind River SBC8548 board
config SBC8560
bool "Wind River SBC8560"
select DEFAULT_UIMAGE
help
This option enables support for the Wind River SBC8560 board
config GE_IMP3A
bool "GE Intelligent Platforms IMP3A"
select DEFAULT_UIMAGE
......@@ -222,18 +225,6 @@ config P3041_DS
help
This option enables support for the P3041 DS board
config P3060_QDS
bool "Freescale P3060 QDS"
select DEFAULT_UIMAGE
select PPC_E500MC
select PHYS_64BIT
select SWIOTLB
select GPIO_MPC8XXX
select HAS_RAPIDIO
select PPC_EPAPR_HV_PIC
help
This option enables support for the P3060 QDS board
config P4080_DS
bool "Freescale P4080 DS"
select DEFAULT_UIMAGE
......@@ -263,6 +254,22 @@ config P5020_DS
help
This option enables support for the P5020 DS board
config PPC_QEMU_E500
bool "QEMU generic e500 platform"
depends on EXPERIMENTAL
select DEFAULT_UIMAGE
help
This option enables support for running as a QEMU guest using
QEMU's generic e500 machine. This is not required if you're
using a QEMU machine that targets a specific board, such as
mpc8544ds.
Unlike most e500 boards that target a specific CPU, this
platform works with any e500-family CPU that QEMU supports.
Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
unset based on the emulated CPU (or actual host CPU in the case
of KVM).
endif # FSL_SOC_BOOKE
config TQM85xx
......
arch/powerpc/platforms/85xx/Makefile
View file @ af3bf7fb
......@@ -5,6 +5,7 @@ obj-$(CONFIG_SMP) += smp.o
obj-y += common.o
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
......@@ -17,14 +18,13 @@ obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1023_RDS) += p1023_rds.o
obj-$(CONFIG_P2041_RDB) += p2041_rdb.o corenet_ds.o
obj-$(CONFIG_P3041_DS) += p3041_ds.o corenet_ds.o
obj-$(CONFIG_P3060_QDS) += p3060_qds.o corenet_ds.o
obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
obj-$(CONFIG_SBC8560) += sbc8560.o
obj-$(CONFIG_SBC8548) += sbc8548.o
obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
obj-$(CONFIG_KSI8560) += ksi8560.o
obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o
obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o
arch/powerpc/platforms/85xx/bsc913x_rdb.c 0 → 100644
View file @ af3bf7fb
/*
* BSC913xRDB Board Setup
*
* Author: Priyanka Jain <Priyanka.Jain@freescale.com>
*
* Copyright 2011-2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/of_platform.h>
#include <linux/pci.h>
#include <asm/mpic.h>
#include <sysdev/fsl_soc.h>
#include <asm/udbg.h>
#include "mpc85xx.h"
void __init bsc913x_rdb_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
if (!mpic)
pr_err("bsc913x: Failed to allocate MPIC structure\n");
else
mpic_init(mpic);
}
/*
* Setup the architecture
*/
static void __init bsc913x_rdb_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("bsc913x_rdb_setup_arch()", 0);
pr_info("bsc913x board from Freescale Semiconductor\n");
}
machine_device_initcall(bsc9131_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init bsc9131_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,bsc9131rdb");
}
define_machine(bsc9131_rdb) {
.name = "BSC9131 RDB",
.probe = bsc9131_rdb_probe,
.setup_arch = bsc913x_rdb_setup_arch,
.init_IRQ = bsc913x_rdb_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/platforms/85xx/mpc85xx_ds.c
View file @ af3bf7fb
......@@ -114,71 +114,53 @@ void __init mpc85xx_ds_pic_init(void)
}
#ifdef CONFIG_PCI
static int primary_phb_addr;
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
static struct device_node *pci_with_uli;
static int mpc85xx_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
struct device_node* node;
struct resource rsrc;
node = hose->dn;
of_address_to_resource(node, 0, &rsrc);
if ((rsrc.start & 0xfffff) == primary_phb_addr) {
if (hose->dn == pci_with_uli)
return uli_exclude_device(hose, bus, devfn);
}
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */
/*
* Setup the architecture
*/
static void __init mpc85xx_ds_setup_arch(void)
static void __init mpc85xx_ds_pci_init(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
struct pci_controller *hose;
#endif
dma_addr_t max = 0xffffffff;
struct device_node *node;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
fsl_pci_init();
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
of_device_is_compatible(np, "fsl,p2020-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == primary_phb_addr)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
/* See if we have a ULI under the primary */
node = of_find_node_by_name(NULL, "uli1575");
while ((pci_with_uli = of_get_parent(node))) {
of_node_put(node);
node = pci_with_uli;
if (pci_with_uli == fsl_pci_primary) {
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
break;
}
}
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
}
mpc85xx_smp_init();
/*
* Setup the architecture
*/
static void __init mpc85xx_ds_setup_arch(void)
{
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ds_setup_arch()", 0);
#ifdef CONFIG_SWIOTLB
if ((memblock_end_of_DRAM() - 1) > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
mpc85xx_ds_pci_init();
mpc85xx_smp_init();
printk("MPC85xx DS board from Freescale Semiconductor\n");
}
......@@ -190,14 +172,7 @@ static int __init mpc8544_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "MPC8544DS")) {
#ifdef CONFIG_PCI
primary_phb_addr = 0xb000;
#endif
return 1;
}
return 0;
return !!of_flat_dt_is_compatible(root, "MPC8544DS");
}
machine_device_initcall(mpc8544_ds, mpc85xx_common_publish_devices);
......@@ -215,14 +190,7 @@ static int __init mpc8572_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS")) {
#ifdef CONFIG_PCI
primary_phb_addr = 0x8000;
#endif
return 1;
}
return 0;
return !!of_flat_dt_is_compatible(root, "fsl,MPC8572DS");
}
/*
......@@ -232,14 +200,7 @@ static int __init p2020_ds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
#ifdef CONFIG_PCI
primary_phb_addr = 0x9000;
#endif
return 1;
}
return 0;
return !!of_flat_dt_is_compatible(root, "fsl,P2020DS");
}
define_machine(mpc8544_ds) {
......
arch/powerpc/platforms/85xx/mpc85xx_rdb.c
View file @ af3bf7fb
......@@ -169,6 +169,7 @@ machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices);
machine_device_initcall(p1024_rdb, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
......@@ -237,6 +238,13 @@ static int __init p1020_utm_pc_probe(void)
return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC");
}
static int __init p1024_rdb_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1024RDB");
}
define_machine(p2020_rdb) {
.name = "P2020 RDB",
.probe = p2020_rdb_probe,
......@@ -348,3 +356,17 @@ define_machine(p1020_rdb_pc) {
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
define_machine(p1024_rdb) {
.name = "P1024 RDB",
.probe = p1024_rdb_probe,
.setup_arch = mpc85xx_rdb_setup_arch,
.init_IRQ = mpc85xx_rdb_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/platforms/85xx/p1022_ds.c
View file @ af3bf7fb
......@@ -27,6 +27,7 @@
#include <sysdev/fsl_pci.h>
#include <asm/udbg.h>
#include <asm/fsl_guts.h>
#include <asm/fsl_lbc.h>
#include "smp.h"
#include "mpc85xx.h"
......@@ -142,17 +143,73 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port,
{
}
struct fsl_law {
u32 lawbar;
u32 reserved1;
u32 lawar;
u32 reserved[5];
};
#define LAWBAR_MASK 0x00F00000
#define LAWBAR_SHIFT 12
#define LAWAR_EN 0x80000000
#define LAWAR_TGT_MASK 0x01F00000
#define LAW_TRGT_IF_LBC (0x04 << 20)
#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
#define BR_BA 0xFFFF8000
/*
* Map a BRx value to a physical address
*
* The localbus BRx registers only store the lower 32 bits of the address. To
* obtain the upper four bits, we need to scan the LAW table. The entry which
* maps to the localbus will contain the upper four bits.
*/
static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
{
#ifndef CONFIG_PHYS_64BIT
/*
* If we only have 32-bit addressing, then the BRx address *is* the
* physical address.
*/
return br & BR_BA;
#else
const struct fsl_law *law = ecm + 0xc08;
unsigned int i;
for (i = 0; i < count; i++) {
u64 lawbar = in_be32(&law[i].lawbar);
u32 lawar = in_be32(&law[i].lawar);
if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
/* Extract the upper four bits */
return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
}
return 0;
#endif
}
/**
* p1022ds_set_monitor_port: switch the output to a different monitor port
*
*/
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
{
struct device_node *guts_node;
struct device_node *indirect_node = NULL;
struct device_node *lbc_node = NULL;
struct device_node *law_node = NULL;
struct ccsr_guts __iomem *guts;
struct fsl_lbc_regs *lbc = NULL;
void *ecm = NULL;
u8 __iomem *lbc_lcs0_ba = NULL;
u8 __iomem *lbc_lcs1_ba = NULL;
phys_addr_t cs0_addr, cs1_addr;
const __be32 *iprop;
unsigned int num_laws;
u8 b;
/* Map the global utilities registers. */
......@@ -168,25 +225,43 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
goto exit;
}
indirect_node = of_find_compatible_node(NULL, NULL,
"fsl,p1022ds-indirect-pixis");
if (!indirect_node) {
pr_err("p1022ds: missing pixis indirect mode node\n");
lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
if (!lbc_node) {
pr_err("p1022ds: missing localbus node\n");
goto exit;
}
lbc_lcs0_ba = of_iomap(indirect_node, 0);
if (!lbc_lcs0_ba) {
pr_err("p1022ds: could not map localbus chip select 0\n");
lbc = of_iomap(lbc_node, 0);
if (!lbc) {
pr_err("p1022ds: could not map localbus node\n");
goto exit;
}
lbc_lcs1_ba = of_iomap(indirect_node, 1);
if (!lbc_lcs1_ba) {
pr_err("p1022ds: could not map localbus chip select 1\n");
law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
if (!law_node) {
pr_err("p1022ds: missing local access window node\n");
goto exit;
}
ecm = of_iomap(law_node, 0);
if (!ecm) {
pr_err("p1022ds: could not map local access window node\n");
goto exit;
}
iprop = of_get_property(law_node, "fsl,num-laws", 0);
if (!iprop) {
pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
goto exit;
}
num_laws = be32_to_cpup(iprop);
cs0_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[0].br));
cs1_addr = lbc_br_to_phys(ecm, num_laws, in_be32(&lbc->bank[1].br));
lbc_lcs0_ba = ioremap(cs0_addr, 1);
lbc_lcs1_ba = ioremap(cs1_addr, 1);
/* Make sure we're in indirect mode first. */
if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
PMUXCR_ELBCDIU_DIU) {
......@@ -254,10 +329,15 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
iounmap(lbc_lcs1_ba);
if (lbc_lcs0_ba)
iounmap(lbc_lcs0_ba);
if (lbc)
iounmap(lbc);
if (ecm)
iounmap(ecm);
if (guts)
iounmap(guts);
of_node_put(indirect_node);
of_node_put(law_node);
of_node_put(lbc_node);
of_node_put(guts_node);
}
......
arch/powerpc/platforms/85xx/p3060_qds.c → arch/powerpc/platforms/85xx/qemu_e500.c
View file @ af3bf7fb
/*
* P3060 QDS Setup
* Paravirt target for a generic QEMU e500 machine
*
* Copyright 2011 Freescale Semiconductor Inc.
* This is intended to be a flexible device-tree-driven platform, not fixed
* to a particular piece of hardware or a particular spec of virtual hardware,
* beyond the assumption of an e500-family CPU. Some things are still hardcoded
* here, such as MPIC, but this is a limitation of the current code rather than
* an interface contract with QEMU.
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -10,68 +16,57 @@
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/phy.h>
#include <linux/of_fdt.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/udbg.h>
#include <asm/mpic.h>
#include <linux/of_platform.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/ehv_pic.h>
#include "corenet_ds.h"
#include "smp.h"
#include "mpc85xx.h"
void __init qemu_e500_pic_init(void)
{
struct mpic *mpic;
mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
}
static void __init qemu_e500_setup_arch(void)
{
ppc_md.progress("qemu_e500_setup_arch()", 0);
fsl_pci_init();
mpc85xx_smp_init();
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init p3060_qds_probe(void)
static int __init qemu_e500_probe(void)
{
unsigned long root = of_get_flat_dt_root();
#ifdef CONFIG_SMP
extern struct smp_ops_t smp_85xx_ops;
#endif
if (of_flat_dt_is_compatible(root, "fsl,P3060QDS"))
return 1;
/* Check if we're running under the Freescale hypervisor */
if (of_flat_dt_is_compatible(root, "fsl,P3060QDS-hv")) {
ppc_md.init_IRQ = ehv_pic_init;
ppc_md.get_irq = ehv_pic_get_irq;
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
#ifdef CONFIG_SMP
/*
* Disable the timebase sync operations because we can't write
* to the timebase registers under the hypervisor.
*/
smp_85xx_ops.give_timebase = NULL;
smp_85xx_ops.take_timebase = NULL;
#endif
return 1;
}
return 0;
return !!of_flat_dt_is_compatible(root, "fsl,qemu-e500");
}
define_machine(p3060_qds) {
.name = "P3060 QDS",
.probe = p3060_qds_probe,
.setup_arch = corenet_ds_setup_arch,
.init_IRQ = corenet_ds_pic_init,
machine_device_initcall(qemu_e500, mpc85xx_common_publish_devices);
define_machine(qemu_e500) {
.name = "QEMU e500",
.probe = qemu_e500_probe,
.setup_arch = qemu_e500_setup_arch,
.init_IRQ = qemu_e500_pic_init,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
.get_irq = mpic_get_coreint_irq,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
.power_save = e500_idle,
};
machine_device_initcall(p3060_qds, corenet_ds_publish_devices);
#ifdef CONFIG_SWIOTLB
machine_arch_initcall(p3060_qds, swiotlb_setup_bus_notifier);
#endif
arch/powerpc/platforms/85xx/sbc8560.c deleted 100644 → 0
View file @ 10db8d21
/*
* Wind River SBC8560 setup and early boot code.
*
* Copyright 2007 Wind River Systems Inc.
*
* By Paul Gortmaker (see MAINTAINERS for contact information)
*
* Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/of_platform.h>
#include <asm/time.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/mpic.h>
#include <mm/mmu_decl.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include "mpc85xx.h"
#ifdef CONFIG_CPM2
#include <asm/cpm2.h>
#include <sysdev/cpm2_pic.h>
#endif
static void __init sbc8560_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
mpc85xx_cpm2_pic_init();
}
/*
* Setup the architecture
*/
#ifdef CONFIG_CPM2
struct cpm_pin {
int port, pin, flags;
};
static const struct cpm_pin sbc8560_pins[] = {
/* SCC1 */
{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* SCC2 */
{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
/* FCC2 */
{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
/* FCC3 */
{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
};
static void __init init_ioports(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
const struct cpm_pin *pin = &sbc8560_pins[i];
cpm2_set_pin(pin->port, pin->pin, pin->flags);
}
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
}
#endif
static void __init sbc8560_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("sbc8560_setup_arch()", 0);
#ifdef CONFIG_CPM2
cpm2_reset();
init_ioports();
#endif
#ifdef CONFIG_PCI
for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
fsl_add_bridge(np, 1);
#endif
}
static void sbc8560_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
/* Display cpu Pll setting */
phid1 = mfspr(SPRN_HID1);
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
}
machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
/*
* Called very early, device-tree isn't unflattened
*/
static int __init sbc8560_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "SBC8560");
}
#ifdef CONFIG_RTC_DRV_M48T59
static int __init sbc8560_rtc_init(void)
{
struct device_node *np;
struct resource res;
struct platform_device *rtc_dev;
np = of_find_compatible_node(NULL, NULL, "m48t59");
if (np == NULL) {
printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
return -ENODEV;
}
of_address_to_resource(np, 0, &res);
of_node_put(np);
printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
if (IS_ERR(rtc_dev)) {
printk("Registering sbc8560 RTC device failed\n");
return PTR_ERR(rtc_dev);
}
return 0;
}
arch_initcall(sbc8560_rtc_init);
#endif /* M48T59 */
static __u8 __iomem *brstcr;
static int __init sbc8560_bdrstcr_init(void)
{
struct device_node *np;
struct resource res;
np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
if (np == NULL) {
printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
return -ENODEV;
}
of_address_to_resource(np, 0, &res);
printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
brstcr = ioremap(res.start, resource_size(&res));
if(!brstcr)
printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
of_node_put(np);
return 0;
}
arch_initcall(sbc8560_bdrstcr_init);
void sbc8560_rstcr_restart(char * cmd)
{
local_irq_disable();
if(brstcr)
clrbits8(brstcr, 0x80);
while(1);
}
define_machine(sbc8560) {
.name = "SBC8560",
.probe = sbc8560_probe,
.setup_arch = sbc8560_setup_arch,
.init_IRQ = sbc8560_pic_init,
.show_cpuinfo = sbc8560_show_cpuinfo,
.get_irq = mpic_get_irq,
.restart = sbc8560_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
};
arch/powerpc/platforms/Kconfig.cputype
View file @ af3bf7fb
......@@ -159,6 +159,10 @@ config PPC_E500MC
bool "e500mc Support"
select PPC_FPU
depends on E500
help
This must be enabled for running on e500mc (and derivatives
such as e5500/e6500), and must be disabled for running on
e500v1 or e500v2.
config PPC_FPU
bool
......
arch/powerpc/sysdev/fsl_pci.c
View file @ af3bf7fb
/*
* MPC83xx/85xx/86xx PCI/PCIE support routing.
*
* Copyright 2007-2011 Freescale Semiconductor, Inc.
* Copyright 2007-2012 Freescale Semiconductor, Inc.
* Copyright 2008-2009 MontaVista Software, Inc.
*
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
......@@ -36,7 +36,7 @@
static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
{
u8 progif;
......@@ -807,3 +807,72 @@ u64 fsl_pci_immrbar_base(struct pci_controller *hose)
return 0;
}
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static const struct of_device_id pci_ids[] = {
{ .compatible = "fsl,mpc8540-pci", },
{ .compatible = "fsl,mpc8548-pcie", },
{ .compatible = "fsl,mpc8610-pci", },
{ .compatible = "fsl,mpc8641-pcie", },
{ .compatible = "fsl,p1022-pcie", },
{ .compatible = "fsl,p1010-pcie", },
{ .compatible = "fsl,p1023-pcie", },
{ .compatible = "fsl,p4080-pcie", },
{ .compatible = "fsl,qoriq-pcie-v2.3", },
{ .compatible = "fsl,qoriq-pcie-v2.2", },
{},
};
struct device_node *fsl_pci_primary;
void __devinit fsl_pci_init(void)
{
struct device_node *node;
struct pci_controller *hose;
dma_addr_t max = 0xffffffff;
/* Callers can specify the primary bus using other means. */
if (!fsl_pci_primary) {
/* If a PCI host bridge contains an ISA node, it's primary. */
node = of_find_node_by_type(NULL, "isa");
while ((fsl_pci_primary = of_get_parent(node))) {
of_node_put(node);
node = fsl_pci_primary;
if (of_match_node(pci_ids, node))
break;
}
}
node = NULL;
for_each_node_by_type(node, "pci") {
if (of_match_node(pci_ids, node)) {
/*
* If there's no PCI host bridge with ISA, arbitrarily
* designate one as primary. This can go away once
* various bugs with primary-less systems are fixed.
*/
if (!fsl_pci_primary)
fsl_pci_primary = node;
fsl_add_bridge(node, fsl_pci_primary == node);
hose = pci_find_hose_for_OF_device(node);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#ifdef CONFIG_SWIOTLB
/*
* if we couldn't map all of DRAM via the dma windows
* we need SWIOTLB to handle buffers located outside of
* dma capable memory region
*/
if (memblock_end_of_DRAM() - 1 > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
#endif
arch/powerpc/sysdev/fsl_pci.h
View file @ af3bf7fb
......@@ -93,5 +93,13 @@ extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
extern int mpc83xx_add_bridge(struct device_node *dev);
u64 fsl_pci_immrbar_base(struct pci_controller *hose);
extern struct device_node *fsl_pci_primary;
#ifdef CONFIG_FSL_PCI
void fsl_pci_init(void);
#else
static inline void fsl_pci_init(void) {}
#endif
#endif /* __POWERPC_FSL_PCI_H */
#endif /* __KERNEL__ */
arch/powerpc/sysdev/mpic.c
View file @ af3bf7fb
......@@ -1211,7 +1211,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
if (of_get_property(node, "single-cpu-affinity", NULL))
flags |= MPIC_SINGLE_DEST_CPU;
if (of_device_is_compatible(node, "fsl,mpic"))
flags |= MPIC_FSL;
flags |= MPIC_FSL | MPIC_LARGE_VECTORS;
mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL);
if (mpic == NULL)
......
arch/powerpc/sysdev/qe_lib/qe.c
View file @ af3bf7fb
......@@ -395,6 +395,9 @@ static void qe_upload_microcode(const void *base,
for (i = 0; i < be32_to_cpu(ucode->count); i++)
out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
/* Set I-RAM Ready Register */
out_be32(&qe_immr->iram.iready, be32_to_cpu(QE_IRAM_READY));
}
/*
......
drivers/watchdog/Kconfig
View file @ af3bf7fb
......@@ -1115,10 +1115,10 @@ config BOOKE_WDT
config BOOKE_WDT_DEFAULT_TIMEOUT
int "PowerPC Book-E Watchdog Timer Default Timeout"
depends on BOOKE_WDT
default 38 if FSL_BOOKE
range 0 63 if FSL_BOOKE
default 3 if !FSL_BOOKE
range 0 3 if !FSL_BOOKE
default 38 if PPC_FSL_BOOK3E
range 0 63 if PPC_FSL_BOOK3E
default 3 if !PPC_FSL_BOOK3E
range 0 3 if !PPC_FSL_BOOK3E
help
Select the default watchdog timer period to be used by the PowerPC
Book-E watchdog driver. A watchdog "event" occurs when the bit
......
drivers/watchdog/booke_wdt.c
View file @ af3bf7fb
......@@ -37,7 +37,7 @@
u32 booke_wdt_enabled;
u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_PPC_FSL_BOOK3E
#define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15))
#define WDTP_MASK (WDTP(0x3f))
#else
......@@ -190,7 +190,7 @@ static long booke_wdt_ioctl(struct file *file,
case WDIOC_SETTIMEOUT:
if (get_user(tmp, p))
return -EFAULT;
#ifdef CONFIG_FSL_BOOKE
#ifdef CONFIG_PPC_FSL_BOOK3E
/* period of 1 gives the largest possible timeout */
if (tmp > period_to_sec(1))
return -EINVAL;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7