Commit afb93d71 authored by Daniel Baluta's avatar Daniel Baluta Committed by Mark Brown

ASoC: SOF: imx: Add i.MX8M HW support

This adds skeleton support for the audio DSP hardware found on NXP i.MX8M
platform.

There is one notable difference between i.MX8M and i.MX8, which doesn't
allow us to reuse HW support from imx8.c file designed for i.MX8:

On i.MX8M resources (clocks, power, pinctrl, etc) are managed by the
Linux kernel while on i.MX8 resources are managed by a separate
System Controller Firmware. This makes the interface to those resources
completely different.
Signed-off-by: default avatarDaniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20200409071832.2039-4-daniel.baluta@oss.nxp.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent cb0312f6
......@@ -14,6 +14,7 @@ if SND_SOC_SOF_IMX_TOPLEVEL
config SND_SOC_SOF_IMX_OF
def_tristate SND_SOC_SOF_OF
select SND_SOC_SOF_IMX8 if SND_SOC_SOF_IMX8_SUPPORT
select SND_SOC_SOF_IMX8M if SND_SOC_SOF_IMX8M_SUPPORT
help
This option is not user-selectable but automagically handled by
'select' statements at a higher level
......@@ -33,4 +34,18 @@ config SND_SOC_SOF_IMX8
This option is not user-selectable but automagically handled by
'select' statements at a higher level
config SND_SOC_SOF_IMX8M_SUPPORT
bool "SOF support for i.MX8M"
help
This adds support for Sound Open Firmware for NXP i.MX8M platforms
Say Y if you have such a device.
If unsure select "N".
config SND_SOC_SOF_IMX8M
tristate
depends on IMX_DSP
help
This option is not user-selectable but automagically handled by
'select' statements at a higher level
endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL
# SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
snd-sof-imx8-objs := imx8.o
snd-sof-imx8m-objs := imx8m.o
obj-$(CONFIG_SND_SOC_SOF_IMX8) += snd-sof-imx8.o
obj-$(CONFIG_SND_SOC_SOF_IMX8M) += snd-sof-imx8m.o
// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
//
// Copyright 2020 NXP
//
// Author: Daniel Baluta <daniel.baluta@nxp.com>
//
// Hardware interface for audio DSP on i.MX8M
#include <linux/firmware.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/module.h>
#include <sound/sof.h>
#include <sound/sof/xtensa.h>
#include <linux/firmware/imx/dsp.h>
#include "../ops.h"
#define MBOX_OFFSET 0x800000
#define MBOX_SIZE 0x1000
struct imx8m_priv {
struct device *dev;
struct snd_sof_dev *sdev;
/* DSP IPC handler */
struct imx_dsp_ipc *dsp_ipc;
struct platform_device *ipc_dev;
};
static void imx8m_get_reply(struct snd_sof_dev *sdev)
{
struct snd_sof_ipc_msg *msg = sdev->msg;
struct sof_ipc_reply reply;
int ret = 0;
if (!msg) {
dev_warn(sdev->dev, "unexpected ipc interrupt\n");
return;
}
/* get reply */
sof_mailbox_read(sdev, sdev->host_box.offset, &reply, sizeof(reply));
if (reply.error < 0) {
memcpy(msg->reply_data, &reply, sizeof(reply));
ret = reply.error;
} else {
/* reply has correct size? */
if (reply.hdr.size != msg->reply_size) {
dev_err(sdev->dev, "error: reply expected %zu got %u bytes\n",
msg->reply_size, reply.hdr.size);
ret = -EINVAL;
}
/* read the message */
if (msg->reply_size > 0)
sof_mailbox_read(sdev, sdev->host_box.offset,
msg->reply_data, msg->reply_size);
}
msg->reply_error = ret;
}
static int imx8m_get_mailbox_offset(struct snd_sof_dev *sdev)
{
return MBOX_OFFSET;
}
static int imx8m_get_window_offset(struct snd_sof_dev *sdev, u32 id)
{
return MBOX_OFFSET;
}
static void imx8m_dsp_handle_reply(struct imx_dsp_ipc *ipc)
{
struct imx8m_priv *priv = imx_dsp_get_data(ipc);
unsigned long flags;
spin_lock_irqsave(&priv->sdev->ipc_lock, flags);
imx8m_get_reply(priv->sdev);
snd_sof_ipc_reply(priv->sdev, 0);
spin_unlock_irqrestore(&priv->sdev->ipc_lock, flags);
}
static void imx8m_dsp_handle_request(struct imx_dsp_ipc *ipc)
{
struct imx8m_priv *priv = imx_dsp_get_data(ipc);
snd_sof_ipc_msgs_rx(priv->sdev);
}
struct imx_dsp_ops imx8m_dsp_ops = {
.handle_reply = imx8m_dsp_handle_reply,
.handle_request = imx8m_dsp_handle_request,
};
static int imx8m_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
{
struct imx8m_priv *priv = (struct imx8m_priv *)sdev->private;
sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
msg->msg_size);
imx_dsp_ring_doorbell(priv->dsp_ipc, 0);
return 0;
}
/*
* DSP control.
*/
static int imx8m_run(struct snd_sof_dev *sdev)
{
/* TODO: start DSP using Audio MIX bits */
return 0;
}
static int imx8m_probe(struct snd_sof_dev *sdev)
{
struct platform_device *pdev =
container_of(sdev->dev, struct platform_device, dev);
struct device_node *np = pdev->dev.of_node;
struct device_node *res_node;
struct resource *mmio;
struct imx8m_priv *priv;
struct resource res;
u32 base, size;
int ret = 0;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
sdev->private = priv;
priv->dev = sdev->dev;
priv->sdev = sdev;
priv->ipc_dev = platform_device_register_data(sdev->dev, "imx-dsp",
PLATFORM_DEVID_NONE,
pdev, sizeof(*pdev));
if (IS_ERR(priv->ipc_dev))
return PTR_ERR(priv->ipc_dev);
priv->dsp_ipc = dev_get_drvdata(&priv->ipc_dev->dev);
if (!priv->dsp_ipc) {
/* DSP IPC driver not probed yet, try later */
ret = -EPROBE_DEFER;
dev_err(sdev->dev, "Failed to get drvdata\n");
goto exit_pdev_unregister;
}
imx_dsp_set_data(priv->dsp_ipc, priv);
priv->dsp_ipc->ops = &imx8m_dsp_ops;
/* DSP base */
mmio = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mmio) {
base = mmio->start;
size = resource_size(mmio);
} else {
dev_err(sdev->dev, "error: failed to get DSP base at idx 0\n");
ret = -EINVAL;
goto exit_pdev_unregister;
}
sdev->bar[SOF_FW_BLK_TYPE_IRAM] = devm_ioremap(sdev->dev, base, size);
if (!sdev->bar[SOF_FW_BLK_TYPE_IRAM]) {
dev_err(sdev->dev, "failed to ioremap base 0x%x size 0x%x\n",
base, size);
ret = -ENODEV;
goto exit_pdev_unregister;
}
sdev->mmio_bar = SOF_FW_BLK_TYPE_IRAM;
res_node = of_parse_phandle(np, "memory-region", 0);
if (!res_node) {
dev_err(&pdev->dev, "failed to get memory region node\n");
ret = -ENODEV;
goto exit_pdev_unregister;
}
ret = of_address_to_resource(res_node, 0, &res);
if (ret) {
dev_err(&pdev->dev, "failed to get reserved region address\n");
goto exit_pdev_unregister;
}
sdev->bar[SOF_FW_BLK_TYPE_SRAM] = devm_ioremap_wc(sdev->dev, res.start,
res.end - res.start +
1);
if (!sdev->bar[SOF_FW_BLK_TYPE_SRAM]) {
dev_err(sdev->dev, "failed to ioremap mem 0x%x size 0x%x\n",
base, size);
ret = -ENOMEM;
goto exit_pdev_unregister;
}
sdev->mailbox_bar = SOF_FW_BLK_TYPE_SRAM;
/* set default mailbox offset for FW ready message */
sdev->dsp_box.offset = MBOX_OFFSET;
return 0;
exit_pdev_unregister:
platform_device_unregister(priv->ipc_dev);
return ret;
}
static int imx8m_remove(struct snd_sof_dev *sdev)
{
struct imx8m_priv *priv = (struct imx8m_priv *)sdev->private;
platform_device_unregister(priv->ipc_dev);
return 0;
}
/* on i.MX8 there is 1 to 1 match between type and BAR idx */
static int imx8m_get_bar_index(struct snd_sof_dev *sdev, u32 type)
{
return type;
}
static void imx8m_ipc_msg_data(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
void *p, size_t sz)
{
sof_mailbox_read(sdev, sdev->dsp_box.offset, p, sz);
}
static int imx8m_ipc_pcm_params(struct snd_sof_dev *sdev,
struct snd_pcm_substream *substream,
const struct sof_ipc_pcm_params_reply *reply)
{
return 0;
}
static struct snd_soc_dai_driver imx8m_dai[] = {
{
.name = "sai-port",
},
};
/* i.MX8 ops */
struct snd_sof_dsp_ops sof_imx8m_ops = {
/* probe and remove */
.probe = imx8m_probe,
.remove = imx8m_remove,
/* DSP core boot */
.run = imx8m_run,
/* Block IO */
.block_read = sof_block_read,
.block_write = sof_block_write,
/* ipc */
.send_msg = imx8m_send_msg,
.fw_ready = sof_fw_ready,
.get_mailbox_offset = imx8m_get_mailbox_offset,
.get_window_offset = imx8m_get_window_offset,
.ipc_msg_data = imx8m_ipc_msg_data,
.ipc_pcm_params = imx8m_ipc_pcm_params,
/* module loading */
.load_module = snd_sof_parse_module_memcpy,
.get_bar_index = imx8m_get_bar_index,
/* firmware loading */
.load_firmware = snd_sof_load_firmware_memcpy,
/* DAI drivers */
.drv = imx8m_dai,
.num_drv = 1, /* we have only 1 SAI interface on i.MX8M */
};
EXPORT_SYMBOL(sof_imx8m_ops);
MODULE_LICENSE("Dual BSD/GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment