Commit b11e1969 authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Felix Fietkau

mt76x0: add ieee80211_ops ops pointer to mt76x0_alloc_device signature

Add ieee80211_ops ops pointer to mt76x0_alloc_device routine signature
in order to specify mac80211 callbacks and remove usb dependency from
mt76x0 generic code.
Move mt76x0_ops callbacks in usb module in order to remove leftover
usb dependency in mt76x0 generic code.
Introduce mt76x0e_ops mac80211 callbacks for pci code
Signed-off-by: default avatarLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
parent 6034b2b0
......@@ -246,23 +246,13 @@ int mt76x0_mac_start(struct mt76x0_dev *dev)
return !mt76x02_wait_for_wpdma(&dev->mt76, 50) ? -ETIMEDOUT : 0;
}
EXPORT_SYMBOL_GPL(mt76x0_mac_start);
static void mt76x0_mac_stop_hw(struct mt76x0_dev *dev)
void mt76x0_mac_stop(struct mt76x0_dev *dev)
{
int i, ok;
if (test_bit(MT76_REMOVED, &dev->mt76.state))
return;
mt76_clear(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_TIMER_EN |
MT_BEACON_TIME_CFG_SYNC_MODE | MT_BEACON_TIME_CFG_TBTT_EN |
MT_BEACON_TIME_CFG_BEACON_TX);
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
dev_warn(dev->mt76.dev, "Warning: TX DMA did not stop!\n");
int i = 200, ok = 0;
/* Page count on TxQ */
i = 200;
while (i-- && ((mt76_rr(dev, 0x0438) & 0xffffffff) ||
(mt76_rr(dev, 0x0a30) & 0x000000ff) ||
(mt76_rr(dev, 0x0a34) & 0x00ff00ff)))
......@@ -275,9 +265,7 @@ static void mt76x0_mac_stop_hw(struct mt76x0_dev *dev)
MT_MAC_SYS_CTRL_ENABLE_TX);
/* Page count on RxQ */
ok = 0;
i = 200;
while (i--) {
for (i = 0; i < 200; i++) {
if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) &&
!mt76_rr(dev, 0x0a30) &&
!mt76_rr(dev, 0x0a34)) {
......@@ -290,17 +278,6 @@ static void mt76x0_mac_stop_hw(struct mt76x0_dev *dev)
if (!mt76_poll(dev, MT_MAC_STATUS, MT_MAC_STATUS_RX, 0, 1000))
dev_warn(dev->mt76.dev, "Warning: MAC RX did not stop!\n");
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
dev_warn(dev->mt76.dev, "Warning: RX DMA did not stop!\n");
}
void mt76x0_mac_stop(struct mt76x0_dev *dev)
{
cancel_delayed_work_sync(&dev->cal_work);
cancel_delayed_work_sync(&dev->mac_work);
mt76u_stop_stat_wk(&dev->mt76);
mt76x0_mac_stop_hw(dev);
}
EXPORT_SYMBOL_GPL(mt76x0_mac_stop);
......@@ -359,12 +336,14 @@ int mt76x0_init_hardware(struct mt76x0_dev *dev)
EXPORT_SYMBOL_GPL(mt76x0_init_hardware);
struct mt76x0_dev *
mt76x0_alloc_device(struct device *pdev, const struct mt76_driver_ops *drv_ops)
mt76x0_alloc_device(struct device *pdev,
const struct mt76_driver_ops *drv_ops,
const struct ieee80211_ops *ops)
{
struct mt76x0_dev *dev;
struct mt76_dev *mdev;
mdev = mt76_alloc_device(sizeof(*dev), &mt76x0_ops);
mdev = mt76_alloc_device(sizeof(*dev), ops);
if (!mdev)
return NULL;
......
......@@ -18,42 +18,7 @@
#include "../mt76x02_util.h"
#include <linux/etherdevice.h>
static int mt76x0_start(struct ieee80211_hw *hw)
{
struct mt76x0_dev *dev = hw->priv;
int ret;
mutex_lock(&dev->mt76.mutex);
ret = mt76x0_mac_start(dev);
if (ret)
goto out;
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mac_work,
MT_CALIBRATE_INTERVAL);
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
MT_CALIBRATE_INTERVAL);
set_bit(MT76_STATE_RUNNING, &dev->mt76.state);
out:
mutex_unlock(&dev->mt76.mutex);
return ret;
}
static void mt76x0_stop(struct ieee80211_hw *hw)
{
struct mt76x0_dev *dev = hw->priv;
mutex_lock(&dev->mt76.mutex);
clear_bit(MT76_STATE_RUNNING, &dev->mt76.state);
mt76x0_mac_stop(dev);
mutex_unlock(&dev->mt76.mutex);
}
static int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
{
struct mt76x0_dev *dev = hw->priv;
int ret = 0;
......@@ -86,6 +51,7 @@ static int mt76x0_config(struct ieee80211_hw *hw, u32 changed)
return ret;
}
EXPORT_SYMBOL_GPL(mt76x0_config);
static void
mt76x0_addr_wr(struct mt76x0_dev *dev, const u32 offset, const u8 *addr)
......@@ -94,9 +60,9 @@ mt76x0_addr_wr(struct mt76x0_dev *dev, const u32 offset, const u8 *addr)
mt76_wr(dev, offset + 4, addr[4] | addr[5] << 8);
}
static void
mt76x0_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed)
void mt76x0_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed)
{
struct mt76x0_dev *dev = hw->priv;
......@@ -146,11 +112,10 @@ mt76x0_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mutex_unlock(&dev->mt76.mutex);
}
EXPORT_SYMBOL_GPL(mt76x0_bss_info_changed);
static void
mt76x0_sw_scan(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
const u8 *mac_addr)
void mt76x0_sw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
const u8 *mac_addr)
{
struct mt76x0_dev *dev = hw->priv;
......@@ -158,10 +123,10 @@ mt76x0_sw_scan(struct ieee80211_hw *hw,
mt76x0_agc_save(dev);
set_bit(MT76_SCANNING, &dev->mt76.state);
}
EXPORT_SYMBOL_GPL(mt76x0_sw_scan);
static void
mt76x0_sw_scan_complete(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
void mt76x0_sw_scan_complete(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct mt76x0_dev *dev = hw->priv;
......@@ -171,8 +136,9 @@ mt76x0_sw_scan_complete(struct ieee80211_hw *hw,
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
MT_CALIBRATE_INTERVAL);
}
EXPORT_SYMBOL_GPL(mt76x0_sw_scan_complete);
static int mt76x0_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
int mt76x0_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
{
struct mt76x0_dev *dev = hw->priv;
......@@ -180,24 +146,4 @@ static int mt76x0_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
return 0;
}
const struct ieee80211_ops mt76x0_ops = {
.tx = mt76x0_tx,
.start = mt76x0_start,
.stop = mt76x0_stop,
.add_interface = mt76x02_add_interface,
.remove_interface = mt76x02_remove_interface,
.config = mt76x0_config,
.configure_filter = mt76x02_configure_filter,
.bss_info_changed = mt76x0_bss_info_changed,
.sta_add = mt76x02_sta_add,
.sta_remove = mt76x02_sta_remove,
.set_key = mt76x02_set_key,
.conf_tx = mt76x02_conf_tx,
.sw_scan_start = mt76x0_sw_scan,
.sw_scan_complete = mt76x0_sw_scan_complete,
.ampdu_action = mt76x02_ampdu_action,
.sta_rate_tbl_update = mt76x02_sta_rate_tbl_update,
.set_rts_threshold = mt76x0_set_rts_threshold,
.wake_tx_queue = mt76_wake_tx_queue,
};
EXPORT_SYMBOL_GPL(mt76x0_set_rts_threshold);
......@@ -110,8 +110,6 @@ struct mt76x0_dev {
struct mac_stats stats;
};
extern const struct ieee80211_ops mt76x0_ops;
static inline bool is_mt7610e(struct mt76x0_dev *dev)
{
/* TODO */
......@@ -126,7 +124,9 @@ void mt76x0_init_debugfs(struct mt76x0_dev *dev);
/* Init */
struct mt76x0_dev *
mt76x0_alloc_device(struct device *pdev, const struct mt76_driver_ops *drv_ops);
mt76x0_alloc_device(struct device *pdev,
const struct mt76_driver_ops *drv_ops,
const struct ieee80211_ops *ops);
int mt76x0_init_hardware(struct mt76x0_dev *dev);
int mt76x0_register_device(struct mt76x0_dev *dev);
void mt76x0_chip_onoff(struct mt76x0_dev *dev, bool enable, bool reset);
......@@ -134,6 +134,16 @@ void mt76x0_chip_onoff(struct mt76x0_dev *dev, bool enable, bool reset);
int mt76x0_mac_start(struct mt76x0_dev *dev);
void mt76x0_mac_stop(struct mt76x0_dev *dev);
int mt76x0_config(struct ieee80211_hw *hw, u32 changed);
void mt76x0_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info, u32 changed);
void mt76x0_sw_scan(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
const u8 *mac_addr);
void mt76x0_sw_scan_complete(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
int mt76x0_set_rts_threshold(struct ieee80211_hw *hw, u32 value);
/* PHY */
void mt76x0_phy_init(struct mt76x0_dev *dev);
int mt76x0_wait_bbp_ready(struct mt76x0_dev *dev);
......
......@@ -21,6 +21,26 @@
#include "mt76x0.h"
#include "mcu.h"
#include "../mt76x02_dma.h"
#include "../mt76x02_util.h"
static int mt76x0e_start(struct ieee80211_hw *hw)
{
return 0;
}
static void mt76x0e_stop(struct ieee80211_hw *hw)
{
}
static const struct ieee80211_ops mt76x0e_ops = {
.tx = mt76x0_tx,
.start = mt76x0e_start,
.stop = mt76x0e_stop,
.config = mt76x0_config,
.add_interface = mt76x02_add_interface,
.remove_interface = mt76x02_remove_interface,
.configure_filter = mt76x02_configure_filter,
};
static int mt76x0e_register_device(struct mt76x0_dev *dev)
{
......@@ -86,7 +106,7 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (ret)
return ret;
dev = mt76x0_alloc_device(&pdev->dev, NULL);
dev = mt76x0_alloc_device(&pdev->dev, NULL, &mt76x0e_ops);
if (!dev)
return -ENOMEM;
......
......@@ -81,6 +81,7 @@ void mt76x0_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
mt76_tx(&dev->mt76, control->sta, wcid, skb);
}
EXPORT_SYMBOL_GPL(mt76x0_tx);
int mt76x0_tx_prepare_skb(struct mt76_dev *mdev, void *data,
struct sk_buff *skb, struct mt76_queue *q,
......
......@@ -84,6 +84,81 @@ static void mt76x0u_cleanup(struct mt76x0_dev *dev)
mt76u_mcu_deinit(&dev->mt76);
}
static void mt76x0u_mac_stop(struct mt76x0_dev *dev)
{
if (test_bit(MT76_REMOVED, &dev->mt76.state))
return;
clear_bit(MT76_STATE_RUNNING, &dev->mt76.state);
cancel_delayed_work_sync(&dev->cal_work);
cancel_delayed_work_sync(&dev->mac_work);
mt76u_stop_stat_wk(&dev->mt76);
mt76_clear(dev, MT_BEACON_TIME_CFG, MT_BEACON_TIME_CFG_TIMER_EN |
MT_BEACON_TIME_CFG_SYNC_MODE | MT_BEACON_TIME_CFG_TBTT_EN |
MT_BEACON_TIME_CFG_BEACON_TX);
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_TX_BUSY, 0, 1000))
dev_warn(dev->mt76.dev, "TX DMA did not stop\n");
mt76x0_mac_stop(dev);
if (!mt76_poll(dev, MT_USB_DMA_CFG, MT_USB_DMA_CFG_RX_BUSY, 0, 1000))
dev_warn(dev->mt76.dev, "RX DMA did not stop\n");
}
static int mt76x0u_start(struct ieee80211_hw *hw)
{
struct mt76x0_dev *dev = hw->priv;
int ret;
mutex_lock(&dev->mt76.mutex);
ret = mt76x0_mac_start(dev);
if (ret)
goto out;
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->mac_work,
MT_CALIBRATE_INTERVAL);
ieee80211_queue_delayed_work(dev->mt76.hw, &dev->cal_work,
MT_CALIBRATE_INTERVAL);
set_bit(MT76_STATE_RUNNING, &dev->mt76.state);
out:
mutex_unlock(&dev->mt76.mutex);
return ret;
}
static void mt76x0u_stop(struct ieee80211_hw *hw)
{
struct mt76x0_dev *dev = hw->priv;
mutex_lock(&dev->mt76.mutex);
mt76x0u_mac_stop(dev);
mutex_unlock(&dev->mt76.mutex);
}
static const struct ieee80211_ops mt76x0u_ops = {
.tx = mt76x0_tx,
.start = mt76x0u_start,
.stop = mt76x0u_stop,
.add_interface = mt76x02_add_interface,
.remove_interface = mt76x02_remove_interface,
.config = mt76x0_config,
.configure_filter = mt76x02_configure_filter,
.bss_info_changed = mt76x0_bss_info_changed,
.sta_add = mt76x02_sta_add,
.sta_remove = mt76x02_sta_remove,
.set_key = mt76x02_set_key,
.conf_tx = mt76x02_conf_tx,
.sw_scan_start = mt76x0_sw_scan,
.sw_scan_complete = mt76x0_sw_scan_complete,
.ampdu_action = mt76x02_ampdu_action,
.sta_rate_tbl_update = mt76x02_sta_rate_tbl_update,
.set_rts_threshold = mt76x0_set_rts_threshold,
.wake_tx_queue = mt76_wake_tx_queue,
};
static int mt76x0u_register_device(struct mt76x0_dev *dev)
{
struct ieee80211_hw *hw = dev->mt76.hw;
......@@ -150,7 +225,8 @@ static int mt76x0u_probe(struct usb_interface *usb_intf,
u32 asic_rev, mac_rev;
int ret;
dev = mt76x0_alloc_device(&usb_intf->dev, &drv_ops);
dev = mt76x0_alloc_device(&usb_intf->dev, &drv_ops,
&mt76x0u_ops);
if (!dev)
return -ENOMEM;
......@@ -223,7 +299,7 @@ static int __maybe_unused mt76x0_suspend(struct usb_interface *usb_intf,
struct mt76_usb *usb = &dev->mt76.usb;
mt76u_stop_queues(&dev->mt76);
mt76x0_mac_stop(dev);
mt76x0u_mac_stop(dev);
usb_kill_urb(usb->mcu.res.urb);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment