Commit b1af9ccc authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (27 commits)
  sh: Fix up L2 cache probe.
  sh: Fix up SH-4A part probe.
  sh: Add support for SH7723 CPU subtype.
  sh: Fix up SH7763 build.
  sh: Add migor_ts support to MigoR
  sh: Add rs5c732b RTC support to MigoR
  sh: Add I2C support to MigoR
  sh: Add I2C platform data to sh7722
  sh: MigoR NAND flash support using gen_flash
  sh: MigoR NOR flash support using physmap-flash
  sh: Fix up mach-types formatting from merge damage.
  sh: r7780rp: Hook up the I2C and SMBus platform devices.
  sh: Use phyical addresses for MigoR smc91x resources
  sh: Use physical addresses for sh7722 USBF resources
  sh: Add MigoR header file
  Fix sh_keysc double free
  sh: Fix up __access_ok() check for nommu.
  sh: Allow optimized clear/copy page routines to be used on SH-2.
  sh: Hook up the rest of the SH7770 serial ports.
  sh: Add support for Solution Engine SH7721 board
  ...
parents cc216c5d 440fc172
......@@ -167,6 +167,12 @@ config CPU_SUBTYPE_SH7263
select CPU_SH2A
select CPU_HAS_FPU
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
select CPU_SH2A
help
Select MX-G if running on an R8A03022BG part.
# SH-3 Processor Support
config CPU_SUBTYPE_SH7705
......@@ -270,6 +276,15 @@ config CPU_SUBTYPE_SH4_202
# SH-4A Processor Support
config CPU_SUBTYPE_SH7723
bool "Support SH7723 processor"
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
help
Select SH7723 if you have an SH-MobileR2 CPU.
config CPU_SUBTYPE_SH7763
bool "Support SH7763 processor"
select CPU_SH4A
......@@ -366,6 +381,14 @@ config SH_7619_SOLUTION_ENGINE
Select 7619 SolutionEngine if configuring for a Hitachi SH7619
evaluation board.
config SH_7721_SOLUTION_ENGINE
bool "SolutionEngine7721"
select SOLUTION_ENGINE
depends on CPU_SUBTYPE_SH7721
help
Select 7721 SolutionEngine if configuring for a Hitachi SH7721
evaluation board.
config SH_7722_SOLUTION_ENGINE
bool "SolutionEngine7722"
select SOLUTION_ENGINE
......@@ -560,7 +583,7 @@ config SH_TMU
config SH_CMT
def_bool y
prompt "CMT timer support"
depends on CPU_SH2
depends on CPU_SH2 && !CPU_SUBTYPE_MXG
help
This enables the use of the CMT as the system timer.
......@@ -578,6 +601,7 @@ config SH_TIMER_IRQ
default "86" if CPU_SUBTYPE_SH7619
default "140" if CPU_SUBTYPE_SH7206
default "142" if CPU_SUBTYPE_SH7203
default "238" if CPU_SUBTYPE_MXG
default "16"
config SH_PCLK_FREQ
......@@ -585,10 +609,10 @@ config SH_PCLK_FREQ
default "27000000" if CPU_SUBTYPE_SH7343
default "31250000" if CPU_SUBTYPE_SH7619
default "32000000" if CPU_SUBTYPE_SH7722
default "33333333" if CPU_SUBTYPE_SH7770 || \
default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
CPU_SUBTYPE_SH7263
CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
default "66000000" if CPU_SUBTYPE_SH4_202
default "50000000"
......
......@@ -29,16 +29,17 @@ config EARLY_SCIF_CONSOLE
config EARLY_SCIF_CONSOLE_PORT
hex
depends on EARLY_SCIF_CONSOLE
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
default "0xf8420000" if CPU_SUBTYPE_SH7619
default "0xff804000" if CPU_SUBTYPE_MXG
default "0xffc30000" if CPU_SUBTYPE_SHX3
default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
default "0xffe80000" if CPU_SH4
default "0xffea0000" if CPU_SUBTYPE_SH7785
default "0xfffe8000" if CPU_SUBTYPE_SH7203
default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
default "0x00000000"
config EARLY_PRINTK
......
......@@ -107,6 +107,7 @@ machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722
machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751
machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780
machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343
machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721
machdir-$(CONFIG_SH_HP6XX) += hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += dreamcast
machdir-$(CONFIG_SH_MPC1211) += mpc1211
......
......@@ -10,8 +10,14 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
#include <asm/machvec.h>
#include <asm/io.h>
#include <asm/sh_keysc.h>
#include <asm/migor.h>
/* Address IRQ Size Bus Description
* 0x00000000 64MB 16 NOR Flash (SP29PL256N)
......@@ -23,9 +29,9 @@
static struct resource smc91x_eth_resources[] = {
[0] = {
.name = "smc91x-regs" ,
.start = P2SEGADDR(0x10000300),
.end = P2SEGADDR(0x1000030f),
.name = "SMC91C111" ,
.start = 0x10000300,
.end = 0x1000030f,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -40,19 +46,202 @@ static struct platform_device smc91x_eth_device = {
.resource = smc91x_eth_resources,
};
static struct sh_keysc_info sh_keysc_info = {
.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
.scan_timing = 3,
.delay = 5,
.keycodes = {
0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1,
0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6,
0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
},
};
static struct resource sh_keysc_resources[] = {
[0] = {
.start = 0x044b0000,
.end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 79,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sh_keysc_device = {
.name = "sh_keysc",
.num_resources = ARRAY_SIZE(sh_keysc_resources),
.resource = sh_keysc_resources,
.dev = {
.platform_data = &sh_keysc_info,
},
};
static struct mtd_partition migor_nor_flash_partitions[] =
{
{
.name = "uboot",
.offset = 0,
.size = (1 * 1024 * 1024),
.mask_flags = MTD_WRITEABLE, /* Read-only */
},
{
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = (15 * 1024 * 1024),
},
{
.name = "other",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
},
};
static struct physmap_flash_data migor_nor_flash_data = {
.width = 2,
.parts = migor_nor_flash_partitions,
.nr_parts = ARRAY_SIZE(migor_nor_flash_partitions),
};
static struct resource migor_nor_flash_resources[] = {
[0] = {
.name = "NOR Flash",
.start = 0x00000000,
.end = 0x03ffffff,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device migor_nor_flash_device = {
.name = "physmap-flash",
.resource = migor_nor_flash_resources,
.num_resources = ARRAY_SIZE(migor_nor_flash_resources),
.dev = {
.platform_data = &migor_nor_flash_data,
},
};
static struct mtd_partition migor_nand_flash_partitions[] = {
{
.name = "nanddata1",
.offset = 0x0,
.size = 512 * 1024 * 1024,
},
{
.name = "nanddata2",
.offset = MTDPART_OFS_APPEND,
.size = 512 * 1024 * 1024,
},
};
static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
writeb(cmd, chip->IO_ADDR_W + 0x00400000);
else if (ctrl & NAND_ALE)
writeb(cmd, chip->IO_ADDR_W + 0x00800000);
else
writeb(cmd, chip->IO_ADDR_W);
}
static int migor_nand_flash_ready(struct mtd_info *mtd)
{
return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
}
struct platform_nand_data migor_nand_flash_data = {
.chip = {
.nr_chips = 1,
.partitions = migor_nand_flash_partitions,
.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
.chip_delay = 20,
.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
},
.ctrl = {
.dev_ready = migor_nand_flash_ready,
.cmd_ctrl = migor_nand_flash_cmd_ctl,
},
};
static struct resource migor_nand_flash_resources[] = {
[0] = {
.name = "NAND Flash",
.start = 0x18000000,
.end = 0x18ffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device migor_nand_flash_device = {
.name = "gen_nand",
.resource = migor_nand_flash_resources,
.num_resources = ARRAY_SIZE(migor_nand_flash_resources),
.dev = {
.platform_data = &migor_nand_flash_data,
}
};
static struct platform_device *migor_devices[] __initdata = {
&smc91x_eth_device,
&sh_keysc_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
};
static struct i2c_board_info __initdata migor_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-rs5c372", 0x32),
.type = "rs5c372b",
},
{
I2C_BOARD_INFO("migor_ts", 0x51),
.irq = 38, /* IRQ6 */
},
};
static int __init migor_devices_setup(void)
{
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
__initcall(migor_devices_setup);
static void __init migor_setup(char **cmdline_p)
{
ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */
/* SMC91C111 - Enable IRQ0 */
ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
/* KEYSC */
ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
/* NAND Flash */
ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
BSC_CS6ABCR);
/* I2C */
ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
/* Touch Panel - Enable IRQ6 */
ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
}
static struct sh_machine_vector mv_migor __initmv = {
......
......@@ -18,31 +18,44 @@ enum {
UNUSED = 0,
/* board specific interrupt sources */
AX88796, /* Ethernet controller */
CF, /* Compact Flash */
PSW, /* Push Switch */
EXT1, /* EXT1n IRQ */
EXT4, /* EXT4n IRQ */
CF, /* Compact Flash */
TP, /* Touch panel */
SCIF1, /* FPGA SCIF1 */
SCIF0, /* FPGA SCIF0 */
SMBUS, /* SMBUS */
RTC, /* RTC Alarm */
AX88796, /* Ethernet controller */
PSW, /* Push Switch */
/* external bus connector */
EXT1, EXT2, EXT4, EXT5, EXT6,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(CF, IRQ_CF),
INTC_IRQ(PSW, IRQ_PSW),
INTC_IRQ(TP, IRQ_TP),
INTC_IRQ(SCIF1, IRQ_SCIF1),
INTC_IRQ(SCIF0, IRQ_SCIF0),
INTC_IRQ(SMBUS, IRQ_SMBUS),
INTC_IRQ(RTC, IRQ_RTC),
INTC_IRQ(AX88796, IRQ_AX88796),
INTC_IRQ(EXT1, IRQ_EXT1),
INTC_IRQ(EXT4, IRQ_EXT4),
INTC_IRQ(PSW, IRQ_PSW),
INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
INTC_IRQ(EXT6, IRQ_EXT6),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4000000, 0, 16, /* IRLMSK */
{ 0, 0, 0, 0, CF, 0, 0, 0,
0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } },
{ SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
};
static unsigned char irl2irq[HL_NR_IRL] __initdata = {
0, IRQ_CF, 0, 0,
0, 0, 0, 0,
0, IRQ_EXT4, 0, IRQ_EXT1,
0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
0, IRQ_AX88796, IRQ_PSW,
};
......
......@@ -4,7 +4,7 @@
* Renesas Solutions Highlander Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2005 - 2007 Paul Mundt
* Copyright (C) 2005 - 2008 Paul Mundt
*
* This contains support for the R7780RP-1, R7780MP, and R7785RP
* Highlander modules.
......@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <net/ax88796.h>
#include <asm/machvec.h>
#include <asm/r7780rp.h>
......@@ -176,11 +177,38 @@ static struct platform_device ax88796_device = {
.resource = ax88796_resources,
};
static struct resource smbus_resources[] = {
[0] = {
.start = PA_SMCR,
.end = PA_SMCR + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SMBUS,
.end = IRQ_SMBUS,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smbus_device = {
.name = "i2c-highlander",
.id = 0,
.num_resources = ARRAY_SIZE(smbus_resources),
.resource = smbus_resources,
};
static struct i2c_board_info __initdata highlander_i2c_devices[] = {
{
I2C_BOARD_INFO("rtc-rs5c372", 0x32),
.type = "r2025sd",
},
};
static struct platform_device *r7780rp_devices[] __initdata = {
&r8a66597_usb_host_device,
&m66592_usb_peripheral_device,
&heartbeat_device,
&smbus_device,
#ifndef CONFIG_SH_R7780RP
&ax88796_device,
#endif
......@@ -199,12 +227,20 @@ static struct trapped_io cf_trapped_io = {
static int __init r7780rp_devices_setup(void)
{
int ret = 0;
#ifndef CONFIG_SH_R7780RP
if (register_trapped_io(&cf_trapped_io) == 0)
platform_device_register(&cf_ide_device);
ret |= platform_device_register(&cf_ide_device);
#endif
return platform_add_devices(r7780rp_devices,
ret |= platform_add_devices(r7780rp_devices,
ARRAY_SIZE(r7780rp_devices));
ret |= i2c_register_board_info(0, highlander_i2c_devices,
ARRAY_SIZE(highlander_i2c_devices));
return ret;
}
device_initcall(r7780rp_devices_setup);
......
obj-y := setup.o irq.o
/*
* linux/arch/sh/boards/se/7721/irq.c
*
* Copyright (C) 2008 Renesas Solutions Corp.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/se7721.h>
enum {
UNUSED = 0,
/* board specific interrupt sources */
MRSHPC,
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
{ 0, MRSHPC } },
};
static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
NULL, NULL, prio_registers, NULL);
/*
* Initialize IRQ setting
*/
void __init init_se7721_IRQ(void)
{
/* PPCR */
ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
register_intc_controller(&intc_desc);
intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
}
/*
* linux/arch/sh/boards/se/7721/setup.c
*
* Copyright (C) 2008 Renesas Solutions Corp.
*
* Hitachi UL SolutionEngine 7721 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/machvec.h>
#include <asm/se7721.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
static struct heartbeat_data heartbeat_data = {
.bit_pos = heartbeat_bit_pos,
.nr_bits = ARRAY_SIZE(heartbeat_bit_pos),
.regsize = 16,
};
static struct resource heartbeat_resources[] = {
[0] = {
.start = PA_LED,
.end = PA_LED,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device heartbeat_device = {
.name = "heartbeat",
.id = -1,
.dev = {
.platform_data = &heartbeat_data,
},
.num_resources = ARRAY_SIZE(heartbeat_resources),
.resource = heartbeat_resources,
};
static struct resource cf_ide_resources[] = {
[0] = {
.start = PA_MRSHPC_IO + 0x1f0,
.end = PA_MRSHPC_IO + 0x1f0 + 8 ,
.flags = IORESOURCE_IO,
},
[1] = {
.start = PA_MRSHPC_IO + 0x1f0 + 0x206,
.end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
.flags = IORESOURCE_IO,
},
[2] = {
.start = MRSHPC_IRQ0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device cf_ide_device = {
.name = "pata_platform",
.id = -1,
.num_resources = ARRAY_SIZE(cf_ide_resources),
.resource = cf_ide_resources,
};
static struct platform_device *se7721_devices[] __initdata = {
&cf_ide_device,
&heartbeat_device
};
static int __init se7721_devices_setup(void)
{
return platform_add_devices(se7721_devices,
ARRAY_SIZE(se7721_devices));
}
device_initcall(se7721_devices_setup);
static void __init se7721_setup(char **cmdline_p)
{
/* for USB */
ctrl_outw(0x0000, 0xA405010C); /* PGCR */
ctrl_outw(0x0000, 0xA405010E); /* PHCR */
ctrl_outw(0x00AA, 0xA4050118); /* PPCR */
ctrl_outw(0x0000, 0xA4050124); /* PSELA */
}
/*
* The Machine Vector
*/
struct sh_machine_vector mv_se7721 __initmv = {
.mv_name = "Solution Engine 7721",
.mv_setup = se7721_setup,
.mv_nr_irqs = 109,
.mv_init_irq = init_se7721_IRQ,
};
......@@ -13,10 +13,12 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/input.h>
#include <asm/machvec.h>
#include <asm/se7722.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_keysc.h>
/* Heartbeat */
static struct heartbeat_data heartbeat_data = {
......@@ -92,10 +94,47 @@ static struct platform_device cf_ide_device = {
.resource = cf_ide_resources,
};
static struct sh_keysc_info sh_keysc_info = {
.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
.scan_timing = 3,
.delay = 5,
.keycodes = { /* SW1 -> SW30 */
KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
KEY_Z,
KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
},
};
static struct resource sh_keysc_resources[] = {
[0] = {
.start = 0x044b0000,
.end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 79,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sh_keysc_device = {
.name = "sh_keysc",
.num_resources = ARRAY_SIZE(sh_keysc_resources),
.resource = sh_keysc_resources,
.dev = {
.platform_data = &sh_keysc_info,
},
};
static struct platform_device *se7722_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
&cf_ide_device,
&sh_keysc_device,
};
static int __init se7722_devices_setup(void)
......@@ -136,6 +175,8 @@ static void __init se7722_setup(char **cmdline_p)
ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
ctrl_outw(0x0000, PORT_PYCR);
ctrl_outw(0x0000, PORT_PZCR);
ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
}
/*
......
This diff is collapsed.
......@@ -83,6 +83,8 @@ static int __init cf_init_default(void)
#include <asm/se.h>
#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
#include <asm/se7722.h>
#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
#include <asm/se7721.h>
#endif
/*
......@@ -99,7 +101,9 @@ static int __init cf_init_default(void)
* 0xB0600000 : I/O
*/
#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE)
#if defined(CONFIG_SH_SOLUTION_ENGINE) || \
defined(CONFIG_SH_7722_SOLUTION_ENGINE) || \
defined(CONFIG_SH_7721_SOLUTION_ENGINE)
static int __init cf_init_se(void)
{
if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
......@@ -112,7 +116,7 @@ static int __init cf_init_se(void)
}
/*
* PC-Card window open
* PC-Card window open
* flag == COMMON/ATTRIBUTE/IO
*/
/* common window open */
......@@ -122,7 +126,7 @@ static int __init cf_init_se(void)
ctrl_outw(0x0b00, MRSHPC_MW0CR2);
else
/* common mode & bus width 16bit SWAP = 0*/
ctrl_outw(0x0300, MRSHPC_MW0CR2);
ctrl_outw(0x0300, MRSHPC_MW0CR2);
/* attribute window open */
ctrl_outw(0x8a85, MRSHPC_MW1CR1);
......@@ -155,10 +159,9 @@ static int __init cf_init_se(void)
int __init cf_init(void)
{
if( mach_is_se() || mach_is_7722se() ){
if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
return cf_init_se();
}
return cf_init_default();
}
......
......@@ -8,6 +8,7 @@ common-y += $(addprefix ../sh2/, ex.o entry.o)
obj-$(CONFIG_SH_FPU) += fpu.o
obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
obj-$(CONFIG_CPU_SUBTYPE_MXG) += setup-mxg.o clock-sh7206.o
......@@ -29,6 +29,9 @@ int __init detect_cpu_and_cache_system(void)
boot_cpu_data.type = CPU_SH7206;
/* While SH7206 has a DSP.. */
boot_cpu_data.flags |= CPU_HAS_DSP;
#elif defined(CONFIG_CPU_SUBTYPE_MXG)
boot_cpu_data.type = CPU_MXG;
boot_cpu_data.flags |= CPU_HAS_DSP;
#endif
boot_cpu_data.dcache.ways = 4;
......
/*
* Renesas MX-G (R8A03022BG) Setup
*
* Copyright (C) 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/serial_sci.h>
enum {
UNUSED = 0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
/* interrupt groups */
PINT, SCIF0, SCIF1,
MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221),
INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223),
INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225),
INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227),
INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229),
INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231),
INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233),
INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235),
INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237),
INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239),
INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241),
INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243),
INTC_IRQ(MTU2_TGI3B, 244),
INTC_IRQ(MTU2_TGI3C, 245),
INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247),
INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249),
INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251),
INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253),
INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
PINT4, PINT5, PINT6, PINT7),
INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
MTU2_TCI0V, MTU2_TGI0E),
INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B,
MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A),
INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
MTU2_TGI3A),
INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A,
MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
{ 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
{ 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
{ 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
{ 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
{ 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
{ 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
{ 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
{ 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
{ 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
{ 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
{ 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
{ 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
{ 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
{ 0xfffd9812, 0, 16, 4, /* IPR15 */
{ SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
{ 0xfffd9814, 0, 16, 4, /* IPR16 */
{ MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xfffd9408, 0, 16, /* PINTER */
{ 0, 0, 0, 0, 0, 0, 0, 0,
PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
};
static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
mask_registers, prio_registers, NULL);
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xff804000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 223, 220, 221, 222 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct platform_device *mxg_devices[] __initdata = {
&sci_device,
};
static int __init mxg_devices_setup(void)
{
return platform_add_devices(mxg_devices,
ARRAY_SIZE(mxg_devices));
}
__initcall(mxg_devices_setup);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
......@@ -53,7 +53,7 @@ int __init detect_cpu_and_cache_system(void)
/*
* Setup some generic flags we can probe on SH-4A parts
*/
if (((pvr >> 16) & 0xff) == 0x10) {
if (((pvr >> 24) & 0xff) == 0x10) {
if ((cvr & 0x10000000) == 0)
boot_cpu_data.flags |= CPU_HAS_DSP;
......@@ -126,17 +126,22 @@ int __init detect_cpu_and_cache_system(void)
CPU_HAS_LLSC;
break;
case 0x3008:
if (prr == 0xa0 || prr == 0xa1) {
boot_cpu_data.type = CPU_SH7722;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
}
else if (prr == 0x70) {
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
switch (prr) {
case 0x50:
boot_cpu_data.type = CPU_SH7723;
boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
break;
case 0x70:
boot_cpu_data.type = CPU_SH7366;
boot_cpu_data.icache.ways = 4;
boot_cpu_data.dcache.ways = 4;
boot_cpu_data.flags |= CPU_HAS_LLSC;
break;
case 0xa0:
case 0xa1:
boot_cpu_data.type = CPU_SH7722;
break;
}
break;
case 0x4000: /* 1st cut */
......@@ -215,6 +220,12 @@ int __init detect_cpu_and_cache_system(void)
* SH-4A's have an optional PIPT L2.
*/
if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
/* Bug if we can't decode the L2 info */
BUG_ON(!(cvr & 0xf));
/* Silicon and specifications have clearly never met.. */
cvr ^= 0xf;
/*
* Size calculation is much more sensible
* than it is for the L1.
......
......@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o
obj-$(CONFIG_CPU_SUBTYPE_SH7343) += setup-sh7343.o
obj-$(CONFIG_CPU_SUBTYPE_SH7722) += setup-sh7722.o
obj-$(CONFIG_CPU_SUBTYPE_SH7723) += setup-sh7723.o
obj-$(CONFIG_CPU_SUBTYPE_SH7366) += setup-sh7366.o
obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o
......@@ -22,6 +23,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o
clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o
clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o
clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o
......
......@@ -16,13 +16,12 @@
static struct resource usbf_resources[] = {
[0] = {
.name = "m66592_udc",
.start = 0xA4480000,
.end = 0xA44800FF,
.name = "USBF",
.start = 0x04480000,
.end = 0x044800FF,
.flags = IORESOURCE_MEM,
},
[1] = {
.name = "m66592_udc",
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ,
......@@ -40,6 +39,26 @@ static struct platform_device usbf_device = {
.resource = usbf_resources,
};
static struct resource iic_resources[] = {
[0] = {
.name = "IIC",
.start = 0x04470000,
.end = 0x04470017,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 96,
.end = 99,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device iic_device = {
.name = "i2c-sh_mobile",
.num_resources = ARRAY_SIZE(iic_resources),
.resource = iic_resources,
};
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xffe00000,
......@@ -74,6 +93,7 @@ static struct platform_device sci_device = {
static struct platform_device *sh7722_devices[] __initdata = {
&usbf_device,
&iic_device,
&sci_device,
};
......
/*
* SH7723 Setup
*
* Copyright (C) 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/mm.h>
#include <linux/serial_sci.h>
#include <asm/mmzone.h>
static struct plat_sci_port sci_platform_data[] = {
{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.irqs = { 56, 56, 56, 56 },
},{
.mapbase = 0xa4e40000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.irqs = { 88, 88, 88, 88 },
},{
.mapbase = 0xa4e50000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
.irqs = { 109, 109, 109, 109 },
}, {
.flags = 0,
}
};
static struct platform_device sci_device = {
.name = "sh-sci",
.id = -1,
.dev = {
.platform_data = sci_platform_data,
},
};
static struct resource rtc_resources[] = {
[0] = {
.start = 0xa465fec0,
.end = 0xa465fec0 + 0x58 - 1,
.flags = IORESOURCE_IO,
},
[1] = {
/* Period IRQ */
.start = 69,
.flags = IORESOURCE_IRQ,
},
[2] = {
/* Carry IRQ */
.start = 70,
.flags = IORESOURCE_IRQ,
},
[3] = {
/* Alarm IRQ */
.start = 68,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device rtc_device = {
.name = "sh-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(rtc_resources),
.resource = rtc_resources,
};
static struct platform_device *sh7723_devices[] __initdata = {
&sci_device,
&rtc_device,
};
static int __init sh7723_devices_setup(void)
{
return platform_add_devices(sh7723_devices,
ARRAY_SIZE(sh7723_devices));
}
__initcall(sh7723_devices_setup);
enum {
UNUSED=0,
/* interrupt sources */
IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
HUDI,
DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
_2DG_TRI,_2DG_INI,_2DG_CEI,
DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
SCIFA_SCIFA0,
VPU_VPUI,
TPU_TPUI,
ADC_ADI,
USB_USI0,
RTC_ATI,RTC_PRI,RTC_CUI,
DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
KEYSC_KEYI,
SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
MSIOF_MSIOFI0,MSIOF_MSIOFI1,
SCIFA_SCIFA1,
FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2,
CMT_CMTI,
TSIF_TSIFI,
SIU_SIUI,
SCIFA_SCIFA2,
TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
IRDA_IRDAI,
ATAPI_ATAPII,
SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2,
VEU2H1_VEU2HI,
LCDC_LCDCI,
TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
/* interrupt groups */
DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
SDHI1, RTC, DMAC1B, SDHI0,
};
static struct intc_vect vectors[] __initdata = {
INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
INTC_VECT(DMAC1A_DEI0,0x700),
INTC_VECT(DMAC1A_DEI1,0x720),
INTC_VECT(DMAC1A_DEI2,0x740),
INTC_VECT(DMAC1A_DEI3,0x760),
INTC_VECT(_2DG_TRI, 0x780),
INTC_VECT(_2DG_INI, 0x7A0),
INTC_VECT(_2DG_CEI, 0x7C0),
INTC_VECT(DMAC0A_DEI0,0x800),
INTC_VECT(DMAC0A_DEI1,0x820),
INTC_VECT(DMAC0A_DEI2,0x840),
INTC_VECT(DMAC0A_DEI3,0x860),
INTC_VECT(VIO_CEUI,0x880),
INTC_VECT(VIO_BEUI,0x8A0),
INTC_VECT(VIO_VEU2HI,0x8C0),
INTC_VECT(VIO_VOUI,0x8E0),
INTC_VECT(SCIFA_SCIFA0,0x900),
INTC_VECT(VPU_VPUI,0x920),
INTC_VECT(TPU_TPUI,0x9A0),
INTC_VECT(ADC_ADI,0x9E0),
INTC_VECT(USB_USI0,0xA20),
INTC_VECT(RTC_ATI,0xA80),
INTC_VECT(RTC_PRI,0xAA0),
INTC_VECT(RTC_CUI,0xAC0),
INTC_VECT(DMAC1B_DEI4,0xB00),
INTC_VECT(DMAC1B_DEI5,0xB20),
INTC_VECT(DMAC1B_DADERR,0xB40),
INTC_VECT(DMAC0B_DEI4,0xB80),
INTC_VECT(DMAC0B_DEI5,0xBA0),
INTC_VECT(DMAC0B_DADERR,0xBC0),
INTC_VECT(KEYSC_KEYI,0xBE0),
INTC_VECT(SCIF_SCIF0,0xC00),
INTC_VECT(SCIF_SCIF1,0xC20),
INTC_VECT(SCIF_SCIF2,0xC40),
INTC_VECT(MSIOF_MSIOFI0,0xC80),
INTC_VECT(MSIOF_MSIOFI1,0xCA0),
INTC_VECT(SCIFA_SCIFA1,0xD00),
INTC_VECT(FLCTL_FLSTEI,0xD80),
INTC_VECT(FLCTL_FLTENDI,0xDA0),
INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
INTC_VECT(I2C_ALI,0xE00),
INTC_VECT(I2C_TACKI,0xE20),
INTC_VECT(I2C_WAITI,0xE40),
INTC_VECT(I2C_DTEI,0xE60),
INTC_VECT(SDHI0_SDHII0,0xE80),
INTC_VECT(SDHI0_SDHII1,0xEA0),
INTC_VECT(SDHI0_SDHII2,0xEC0),
INTC_VECT(CMT_CMTI,0xF00),
INTC_VECT(TSIF_TSIFI,0xF20),
INTC_VECT(SIU_SIUI,0xF80),
INTC_VECT(SCIFA_SCIFA2,0xFA0),
INTC_VECT(TMU0_TUNI0,0x400),
INTC_VECT(TMU0_TUNI1,0x420),
INTC_VECT(TMU0_TUNI2,0x440),
INTC_VECT(IRDA_IRDAI,0x480),
INTC_VECT(ATAPI_ATAPII,0x4A0),
INTC_VECT(SDHI1_SDHII0,0x4E0),
INTC_VECT(SDHI1_SDHII1,0x500),
INTC_VECT(SDHI1_SDHII2,0x520),
INTC_VECT(VEU2H1_VEU2HI,0x560),
INTC_VECT(LCDC_LCDCI,0x580),
INTC_VECT(TMU1_TUNI0,0x920),
INTC_VECT(TMU1_TUNI1,0x940),
INTC_VECT(TMU1_TUNI2,0x960),
};
static struct intc_group groups[] __initdata = {
INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2),
INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
{ 0, TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} },
{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
{ VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
{ 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
{ DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
{ 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
{ KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
{ 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
{ I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
{ 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } },
{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
{ 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
{ 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
{ 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
{ 0,0,0,0,0,0,0,ATAPI_ATAPII } },
{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
{ 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static struct intc_sense_reg sense_registers[] __initdata = {
{ 0xa414001c, 16, 2, /* ICR1 */
{ IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
mask_registers, prio_registers, sense_registers);
void __init plat_irq_setup(void)
{
register_intc_controller(&intc_desc);
}
void __init plat_mem_setup(void)
{
/* Register the URAM space as Node 1 */
setup_bootmem_node(1, 0x055f0000, 0x05610000);
}
......@@ -231,12 +231,6 @@ static struct intc_group groups[] __initdata = {
INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3),
};
static struct intc_prio priorities[] __initdata = {
INTC_PRIO(SCIF0, 3),
INTC_PRIO(SCIF1, 3),
INTC_PRIO(SCIF2, 3),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
{ 0, 0, 0, 0, 0, 0, GPIO, 0,
......@@ -270,11 +264,10 @@ static struct intc_prio_reg prio_registers[] __initdata = {
{ 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
};
static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities,
static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
mask_registers, prio_registers, NULL);
/* Support for external interrupt pins in IRQ mode */
static struct intc_vect irq_vectors[] __initdata = {
INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
......@@ -302,7 +295,6 @@ static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
irq_sense_registers);
/* External interrupt pins in IRL mode */
static struct intc_vect irl_vectors[] __initdata = {
INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
......
/*
* SH7770 Setup
*
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2006 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
......@@ -28,6 +28,41 @@ static struct plat_sci_port sci_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 63, 63, 63, 63 },
}, {
.mapbase = 0xff926000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 64, 64, 64, 64 },
}, {
.mapbase = 0xff927000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 65, 65, 65, 65 },
}, {
.mapbase = 0xff928000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 66, 66, 66, 66 },
}, {
.mapbase = 0xff929000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 67, 67, 67, 67 },
}, {
.mapbase = 0xff92a000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 68, 68, 68, 68 },
}, {
.mapbase = 0xff92b000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 69, 69, 69, 69 },
}, {
.mapbase = 0xff92c000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCIF,
.irqs = { 70, 70, 70, 70 },
}, {
.flags = 0,
}
......
......@@ -23,6 +23,8 @@
#include <linux/kexec.h>
#include <linux/module.h>
#include <linux/smp.h>
#include <linux/err.h>
#include <linux/debugfs.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/page.h>
......@@ -333,6 +335,7 @@ static const char *cpu_name[] = {
[CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785",
[CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3",
[CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103",
[CPU_MXG] = "MX-G", [CPU_SH7723] = "SH7723",
[CPU_SH7366] = "SH7366", [CPU_SH_NONE] = "Unknown"
};
......@@ -443,3 +446,15 @@ const struct seq_operations cpuinfo_op = {
.show = show_cpuinfo,
};
#endif /* CONFIG_PROC_FS */
struct dentry *sh_debugfs_root;
static int __init sh_debugfs_init(void)
{
sh_debugfs_root = debugfs_create_dir("sh", NULL);
if (IS_ERR(sh_debugfs_root))
return PTR_ERR(sh_debugfs_root);
return 0;
}
arch_initcall(sh_debugfs_init);
......@@ -27,11 +27,11 @@ ENTRY(clear_page)
mov #0,r0
!
1:
#if defined(CONFIG_CPU_SH3)
mov.l r0,@r4
#elif defined(CONFIG_CPU_SH4)
#if defined(CONFIG_CPU_SH4)
movca.l r0,@r4
mov r4,r1
#else
mov.l r0,@r4
#endif
add #32,r4
mov.l r0,@-r4
......
......@@ -41,11 +41,11 @@ ENTRY(copy_page)
mov.l @r11+,r5
mov.l @r11+,r6
mov.l @r11+,r7
#if defined(CONFIG_CPU_SH3)
mov.l r0,@r10
#elif defined(CONFIG_CPU_SH4)
#if defined(CONFIG_CPU_SH4)
movca.l r0,@r10
mov r10,r0
#else
mov.l r0,@r10
#endif
add #32,r10
mov.l r7,@-r10
......
......@@ -127,13 +127,13 @@ static int __init cache_debugfs_init(void)
{
struct dentry *dcache_dentry, *icache_dentry;
dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL,
dcache_dentry = debugfs_create_file("dcache", S_IRUSR, sh_debugfs_root,
(unsigned int *)CACHE_TYPE_DCACHE,
&cache_debugfs_fops);
if (IS_ERR(dcache_dentry))
return PTR_ERR(dcache_dentry);
icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL,
icache_dentry = debugfs_create_file("icache", S_IRUSR, sh_debugfs_root,
(unsigned int *)CACHE_TYPE_ICACHE,
&cache_debugfs_fops);
if (IS_ERR(icache_dentry)) {
......
......@@ -393,7 +393,7 @@ static int __init pmb_debugfs_init(void)
struct dentry *dentry;
dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
NULL, NULL, &pmb_debugfs_fops);
sh_debugfs_root, NULL, &pmb_debugfs_fops);
if (IS_ERR(dentry))
return PTR_ERR(dentry);
......
......@@ -21,8 +21,9 @@ HD64465 HD64465
7206SE SH_7206_SOLUTION_ENGINE
7343SE SH_7343_SOLUTION_ENGINE
7619SE SH_7619_SOLUTION_ENGINE
7722SE SH_7722_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7721SE SH_7721_SOLUTION_ENGINE
7722SE SH_7722_SOLUTION_ENGINE
7751SE SH_7751_SOLUTION_ENGINE
7780SE SH_7780_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
HP6XX SH_HP6XX
......
......@@ -314,4 +314,13 @@ config KEYBOARD_BFIN
To compile this driver as a module, choose M here: the
module will be called bf54x-keys.
config KEYBOARD_SH_KEYSC
tristate "SuperH KEYSC keypad support"
depends on SUPERH
help
Say Y here if you want to use a keypad attached to the KEYSC block
on SuperH processors such as sh7722 and sh7343.
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
endif
......@@ -26,3 +26,4 @@ obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
/*
* SuperH KEYSC Keypad Driver
*
* Copyright (C) 2008 Magnus Damm
*
* Based on gpio_keys.c, Copyright 2005 Phil Blundell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/io.h>
#include <asm/sh_keysc.h>
#define KYCR1_OFFS 0x00
#define KYCR2_OFFS 0x04
#define KYINDR_OFFS 0x08
#define KYOUTDR_OFFS 0x0c
#define KYCR2_IRQ_LEVEL 0x10
#define KYCR2_IRQ_DISABLED 0x00
static const struct {
unsigned char kymd, keyout, keyin;
} sh_keysc_mode[] = {
[SH_KEYSC_MODE_1] = { 0, 6, 5 },
[SH_KEYSC_MODE_2] = { 1, 5, 6 },
[SH_KEYSC_MODE_3] = { 2, 4, 7 },
};
struct sh_keysc_priv {
void __iomem *iomem_base;
unsigned long last_keys;
struct input_dev *input;
struct sh_keysc_info pdata;
};
static irqreturn_t sh_keysc_isr(int irq, void *dev_id)
{
struct platform_device *pdev = dev_id;
struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
struct sh_keysc_info *pdata = &priv->pdata;
unsigned long keys, keys1, keys0, mask;
unsigned char keyin_set, tmp;
int i, k;
dev_dbg(&pdev->dev, "isr!\n");
keys1 = ~0;
keys0 = 0;
do {
keys = 0;
keyin_set = 0;
iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
for (i = 0; i < sh_keysc_mode[pdata->mode].keyout; i++) {
iowrite16(0xfff ^ (3 << (i * 2)),
priv->iomem_base + KYOUTDR_OFFS);
udelay(pdata->delay);
tmp = ioread16(priv->iomem_base + KYINDR_OFFS);
keys |= tmp << (sh_keysc_mode[pdata->mode].keyin * i);
tmp ^= (1 << sh_keysc_mode[pdata->mode].keyin) - 1;
keyin_set |= tmp;
}
iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
iowrite16(KYCR2_IRQ_LEVEL | (keyin_set << 8),
priv->iomem_base + KYCR2_OFFS);
keys ^= ~0;
keys &= (1 << (sh_keysc_mode[pdata->mode].keyin *
sh_keysc_mode[pdata->mode].keyout)) - 1;
keys1 &= keys;
keys0 |= keys;
dev_dbg(&pdev->dev, "keys 0x%08lx\n", keys);
} while (ioread16(priv->iomem_base + KYCR2_OFFS) & 0x01);
dev_dbg(&pdev->dev, "last_keys 0x%08lx keys0 0x%08lx keys1 0x%08lx\n",
priv->last_keys, keys0, keys1);
for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
k = pdata->keycodes[i];
if (!k)
continue;
mask = 1 << i;
if (!((priv->last_keys ^ keys0) & mask))
continue;
if ((keys1 | keys0) & mask) {
input_event(priv->input, EV_KEY, k, 1);
priv->last_keys |= mask;
}
if (!(keys1 & mask)) {
input_event(priv->input, EV_KEY, k, 0);
priv->last_keys &= ~mask;
}
}
input_sync(priv->input);
return IRQ_HANDLED;
}
#define res_size(res) ((res)->end - (res)->start + 1)
static int __devinit sh_keysc_probe(struct platform_device *pdev)
{
struct sh_keysc_priv *priv;
struct sh_keysc_info *pdata;
struct resource *res;
struct input_dev *input;
int i, k;
int irq, error;
if (!pdev->dev.platform_data) {
dev_err(&pdev->dev, "no platform data defined\n");
error = -EINVAL;
goto err0;
}
error = -ENXIO;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
goto err0;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get irq\n");
goto err0;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (priv == NULL) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
error = -ENOMEM;
goto err0;
}
platform_set_drvdata(pdev, priv);
memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata));
pdata = &priv->pdata;
res = request_mem_region(res->start, res_size(res), pdev->name);
if (res == NULL) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
error = -EBUSY;
goto err1;
}
priv->iomem_base = ioremap_nocache(res->start, res_size(res));
if (priv->iomem_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
error = -ENXIO;
goto err2;
}
priv->input = input_allocate_device();
if (!priv->input) {
dev_err(&pdev->dev, "failed to allocate input device\n");
error = -ENOMEM;
goto err3;
}
input = priv->input;
input->evbit[0] = BIT_MASK(EV_KEY);
input->name = pdev->name;
input->phys = "sh-keysc-keys/input0";
input->dev.parent = &pdev->dev;
input->id.bustype = BUS_HOST;
input->id.vendor = 0x0001;
input->id.product = 0x0001;
input->id.version = 0x0100;
error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto err4;
}
for (i = 0; i < SH_KEYSC_MAXKEYS; i++) {
k = pdata->keycodes[i];
if (k)
input_set_capability(input, EV_KEY, k);
}
error = input_register_device(input);
if (error) {
dev_err(&pdev->dev, "failed to register input device\n");
goto err5;
}
iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) |
pdata->scan_timing, priv->iomem_base + KYCR1_OFFS);
iowrite16(0, priv->iomem_base + KYOUTDR_OFFS);
iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS);
return 0;
err5:
free_irq(irq, pdev);
err4:
input_free_device(input);
err3:
iounmap(priv->iomem_base);
err2:
release_mem_region(res->start, res_size(res));
err1:
platform_set_drvdata(pdev, NULL);
kfree(priv);
err0:
return error;
}
static int __devexit sh_keysc_remove(struct platform_device *pdev)
{
struct sh_keysc_priv *priv = platform_get_drvdata(pdev);
struct resource *res;
iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS);
input_unregister_device(priv->input);
free_irq(platform_get_irq(pdev, 0), pdev);
iounmap(priv->iomem_base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, res_size(res));
platform_set_drvdata(pdev, NULL);
kfree(priv);
return 0;
}
#define sh_keysc_suspend NULL
#define sh_keysc_resume NULL
struct platform_driver sh_keysc_device_driver = {
.probe = sh_keysc_probe,
.remove = __devexit_p(sh_keysc_remove),
.suspend = sh_keysc_suspend,
.resume = sh_keysc_resume,
.driver = {
.name = "sh_keysc",
}
};
static int __init sh_keysc_init(void)
{
return platform_driver_register(&sh_keysc_device_driver);
}
static void __exit sh_keysc_exit(void)
{
platform_driver_unregister(&sh_keysc_device_driver);
}
module_init(sh_keysc_init);
module_exit(sh_keysc_exit);
MODULE_AUTHOR("Magnus Damm");
MODULE_DESCRIPTION("SuperH KEYSC Keypad Driver");
MODULE_LICENSE("GPL");
This diff is collapsed.
......@@ -333,7 +333,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
}
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SH3)
/* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
......@@ -384,6 +383,12 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
sci_out(port, SCFCR, fcr_val);
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
{
/* Nothing to do here.. */
sci_out(port, SCFCR, 0);
}
#else
/* For SH7750 */
static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
......
/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
*
* linux/drivers/serial/sh-sci.h
*
* SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2000 Greg Banks
* Copyright (C) 2002, 2003 Paul Mundt
* Modified to support multiple serial ports. Stuart Menefy (May 2000).
* Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
* Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
* Removed SH7300 support (Jul 2007).
* Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
*/
#include <linux/serial_core.h>
#include <asm/io.h>
#include <asm/gpio.h>
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
......@@ -102,6 +87,15 @@
# define SCSPTR0 SCPDR0
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
# define SCSPTR0 0xa4050160
# define SCSPTR1 0xa405013e
# define SCSPTR2 0xa4050160
# define SCSPTR3 0xa405013e
# define SCSPTR4 0xa4050128
# define SCSPTR5 0xa4050128
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
......@@ -395,6 +389,11 @@
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
#define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
#define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#else
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
......@@ -419,6 +418,18 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x24, 16)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8)
SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16)
SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8)
SCIF_FNS(SCTDSR, 0x0c, 8)
SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCLSR, 0x24, 16)
#else
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
/* name off sz off sz off sz off sz off sz*/
......@@ -589,6 +600,23 @@ static inline int sci_rxd_in(struct uart_port *port)
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
if (port->mapbase == 0xffe10000)
return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
if (port->mapbase == 0xffe20000)
return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
if (port->mapbase == 0xa4e30000)
return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
if (port->mapbase == 0xa4e40000)
return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
if (port->mapbase == 0xa4e50000)
return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
return 1;
}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
......@@ -727,6 +755,8 @@ static inline int sci_rxd_in(struct uart_port *port)
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(16*bps)-1)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
#elif defined(CONFIG_SUPERH64)
......
......@@ -25,7 +25,7 @@ static void __init check_bugs(void)
case CPU_SH7619:
*p++ = '2';
break;
case CPU_SH7203 ... CPU_SH7263:
case CPU_SH7203 ... CPU_MXG:
*p++ = '2';
*p++ = 'a';
break;
......
......@@ -10,14 +10,14 @@
#ifndef __ASM_CPU_SH4_FREQ_H
#define __ASM_CPU_SH4_FREQ_H
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
defined(CONFIG_CPU_SUBTYPE_SH7723) || \
defined(CONFIG_CPU_SUBTYPE_SH7366)
#define FRQCR 0xa4150000
#define VCLKCR 0xa4150004
#define SCLKACR 0xa4150008
#define SCLKBCR 0xa415000c
#if defined(CONFIG_CPU_SUBTYPE_SH7722)
#define IrDACLKCR 0xa4150010
#endif
#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780)
#define FRQCR 0xffc80000
......
#ifndef __ASM_SH_CPU_SH4_RTC_H
#define __ASM_SH_CPU_SH4_RTC_H
#ifdef CONFIG_CPU_SUBTYPE_SH7723
#define rtc_reg_size sizeof(u16)
#else
#define rtc_reg_size sizeof(u32)
#endif
#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */
#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR
......
#ifndef __ASM_SH_MIGOR_H
#define __ASM_SH_MIGOR_H
/*
* linux/include/asm-sh/migor.h
*
* Copyright (C) 2008 Renesas Solutions
*
* Portions Copyright (C) 2007 Nobuhiro Iwamatsu
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <asm/addrspace.h>
/* GPIO */
#define MSTPCR0 0xa4150030
#define MSTPCR1 0xa4150034
#define MSTPCR2 0xa4150038
#define PORT_PACR 0xa4050100
#define PORT_PDCR 0xa4050106
#define PORT_PECR 0xa4050108
#define PORT_PHCR 0xa405010e
#define PORT_PJCR 0xa4050110
#define PORT_PKCR 0xa4050112
#define PORT_PLCR 0xa4050114
#define PORT_PMCR 0xa4050116
#define PORT_PRCR 0xa405011c
#define PORT_PWCR 0xa4050146
#define PORT_PXCR 0xa4050148
#define PORT_PYCR 0xa405014a
#define PORT_PZCR 0xa405014c
#define PORT_PADR 0xa4050120
#define PORT_PWDR 0xa4050166
#define PORT_HIZCRA 0xa4050158
#define PORT_HIZCRC 0xa405015c
#define PORT_MSELCRB 0xa4050182
#define MSTPCR1 0xa4150034
#define MSTPCR2 0xa4150038
#define PORT_PSELA 0xa405014e
#define PORT_PSELB 0xa4050150
#define PORT_PSELC 0xa4050152
#define PORT_PSELD 0xa4050154
#define PORT_HIZCRA 0xa4050158
#define PORT_HIZCRB 0xa405015a
#define PORT_HIZCRC 0xa405015c
#define BSC_CS6ABCR 0xfec1001c
#endif /* __ASM_SH_MIGOR_H */
......@@ -16,7 +16,7 @@ enum cpu_type {
CPU_SH7619,
/* SH-2A types */
CPU_SH7203, CPU_SH7206, CPU_SH7263,
CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
/* SH-3 types */
CPU_SH7705, CPU_SH7706, CPU_SH7707,
......@@ -29,7 +29,8 @@ enum cpu_type {
CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
/* SH-4A types */
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, CPU_SHX3,
CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
CPU_SH7723, CPU_SHX3,
/* SH4AL-DSP types */
CPU_SH7343, CPU_SH7722, CPU_SH7366,
......
......@@ -55,11 +55,11 @@
#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
#define PA_ICCR (PA_BCR+0x0600) /* Serial control */
#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */
#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */
#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */
#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */
#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
#define PA_PMR (PA_BCR+0x0900) /* */
......@@ -107,11 +107,11 @@
#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
#define PA_ICCR (PA_BCR+0x0500) /* Serial control */
#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */
#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */
#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */
#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */
#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */
#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
#define PA_AX88796L 0xa5800400 /* AX88796L Area */
......@@ -190,6 +190,8 @@
#define IRQ_TP (HL_FPGA_IRQ_BASE + 12)
#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13)
#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14)
#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15)
#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16)
unsigned char *highlander_init_irq_r7780mp(void);
unsigned char *highlander_init_irq_r7780rp(void);
......
/*
* Copyright (C) 2008 Renesas Solutions Corp.
*
* Hitachi UL SolutionEngine 7721 Support.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#ifndef __ASM_SH_SE7721_H
#define __ASM_SH_SE7721_H
#include <asm/addrspace.h>
/* Box specific addresses. */
#define SE_AREA0_WIDTH 2 /* Area0: 32bit */
#define PA_ROM 0xa0000000 /* EPROM */
#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */
#define PA_FROM 0xa1000000 /* Flash-ROM */
#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */
#define PA_EXT1 0xa4000000
#define PA_EXT1_SIZE 0x04000000
#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */
#define PA_SDRAM_SIZE 0x04000000
#define PA_EXT4 0xb0000000
#define PA_EXT4_SIZE 0x04000000
#define PA_PERIPHERAL 0xB8000000
#define PA_PCIC PA_PERIPHERAL
#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0)
#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000)
#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000)
#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000)
#define MRSHPC_OPTION (PA_MRSHPC + 6)
#define MRSHPC_CSR (PA_MRSHPC + 8)
#define MRSHPC_ISR (PA_MRSHPC + 10)
#define MRSHPC_ICR (PA_MRSHPC + 12)
#define MRSHPC_CPWCR (PA_MRSHPC + 14)
#define MRSHPC_MW0CR1 (PA_MRSHPC + 16)
#define MRSHPC_MW1CR1 (PA_MRSHPC + 18)
#define MRSHPC_IOWCR1 (PA_MRSHPC + 20)
#define MRSHPC_MW0CR2 (PA_MRSHPC + 22)
#define MRSHPC_MW1CR2 (PA_MRSHPC + 24)
#define MRSHPC_IOWCR2 (PA_MRSHPC + 26)
#define MRSHPC_CDCR (PA_MRSHPC + 28)
#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
#define PA_LED 0xB6800000 /* 8bit LED */
#define PA_FPGA 0xB7000000 /* FPGA base address */
#define MRSHPC_IRQ0 10
#define FPGA_ILSR1 (PA_FPGA + 0x02)
#define FPGA_ILSR2 (PA_FPGA + 0x03)
#define FPGA_ILSR3 (PA_FPGA + 0x04)
#define FPGA_ILSR4 (PA_FPGA + 0x05)
#define FPGA_ILSR5 (PA_FPGA + 0x06)
#define FPGA_ILSR6 (PA_FPGA + 0x07)
#define FPGA_ILSR7 (PA_FPGA + 0x08)
#define FPGA_ILSR8 (PA_FPGA + 0x09)
void init_se7721_IRQ(void);
#define __IO_PREFIX se7721
#include <asm/io_generic.h>
#endif /* __ASM_SH_SE7721_H */
......@@ -77,6 +77,8 @@
#define PORT_PSELA 0xA405014EUL
#define PORT_PYCR 0xA405014AUL
#define PORT_PZCR 0xA405014CUL
#define PORT_HIZCRA 0xA4050158UL
#define PORT_HIZCRC 0xA405015CUL
/* IRQ */
#define IRQ0_IRQ 32
......
#ifndef __ASM_KEYSC_H__
#define __ASM_KEYSC_H__
#define SH_KEYSC_MAXKEYS 30
struct sh_keysc_info {
enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
int delay;
int keycodes[SH_KEYSC_MAXKEYS];
};
#endif /* __ASM_KEYSC_H__ */
......@@ -146,6 +146,8 @@ extern unsigned int instruction_size(unsigned int insn);
extern unsigned long cached_to_uncached;
extern struct dentry *sh_debugfs_root;
/* XXX
* disable hlt during certain critical i/o operations
*/
......
......@@ -55,13 +55,10 @@ static inline void set_fs(mm_segment_t s)
* If we don't have an MMU (or if its disabled) the only thing we really have
* to look out for is if the address resides somewhere outside of what
* available RAM we have.
*
* TODO: This check could probably also stand to be restricted somewhat more..
* though it still does the Right Thing(tm) for the time being.
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
return ((addr >= memory_start) && ((addr + size) < memory_end));
return 1;
}
#else /* CONFIG_MMU */
#define __addr_ok(addr) \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment