Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add support for new USB Tablet PCs
  Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback
  Input: i8042 - add Compal Hel80 laptop to nomux blacklist
  Input: cm109 - add keymap for ATCom AU-100 phone
  Input: fix the example of an input device driver
  Input: psmouse - fix incorrect validate_byte check in OLPC protocol
  Input: atkbd - cancel delayed work before freeing its structure
  Input: atkbd - add keymap quirk for Inventec Symphony systems
  Input: i8042 - add Dell XPS M1530 to nomux list
  Input: elo - fix format string in elo driver

Documentation/input/input-programming.txt

@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

drivers/input/keyboard/atkbd.c

@@ -824,7 +824,7 @@ static void atkbd_disconnect(struct serio *serio)
 	atkbd_disable(atkbd);
 
 	/* make sure we don't have a command in flight */
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&atkbd->event_work);
 
 	sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group);
 	input_unregister_device(atkbd->dev);
@@ -867,6 +867,22 @@ static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
 					atkbd->force_release_mask);
 }
 
+/*
+ * Inventec system with broken key release on volume keys
+ */
+static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd)
+{
+	const unsigned int forced_release_keys[] = {
+		0xae, 0xb0,
+	};
+	int i;
+
+	if (atkbd->set == 2)
+		for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+			__set_bit(forced_release_keys[i],
+				  atkbd->force_release_mask);
+}
+
 /*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
@@ -1468,6 +1484,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_fixup,
 		.driver_data = atkbd_hp_keymap_fixup,
 	},
+	{
+		.ident = "Inventec Symphony",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
+		},
+		.callback = atkbd_setup_fixup,
+		.driver_data = atkbd_inventec_keymap_fixup,
+	},
 	{ }
 };
 

drivers/input/misc/cm109.c

@@ -42,7 +42,7 @@
 
 static char *phone = "kip1000";
 module_param(phone, charp, S_IRUSR);
-MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01}");
+MODULE_PARM_DESC(phone, "Phone name {kip1000, gtalk, usbph01, atcom}");
 
 enum {
 	/* HID Registers */
@@ -258,6 +258,37 @@ static unsigned short keymap_usbph01(int scancode)
 	}
 }
 
+/*
+ * Keymap for ATCom AU-100
+ * http://www.atcom.cn/En_products_AU100.html
+ * http://www.packetizer.com/products/au100/
+ * http://www.voip-info.org/wiki/view/AU-100
+ *
+ * Contributed by daniel@gimpelevich.san-francisco.ca.us
+ */
+static unsigned short keymap_atcom(int scancode)
+{
+	switch (scancode) {				/* phone key:   */
+	case 0x82: return KEY_NUMERIC_0;		/*   0          */
+	case 0x11: return KEY_NUMERIC_1;		/*   1          */
+	case 0x12: return KEY_NUMERIC_2;		/*   2          */
+	case 0x14: return KEY_NUMERIC_3;		/*   3          */
+	case 0x21: return KEY_NUMERIC_4;		/*   4          */
+	case 0x22: return KEY_NUMERIC_5;		/*   5          */
+	case 0x24: return KEY_NUMERIC_6;		/*   6          */
+	case 0x41: return KEY_NUMERIC_7;		/*   7          */
+	case 0x42: return KEY_NUMERIC_8;		/*   8          */
+	case 0x44: return KEY_NUMERIC_9;		/*   9          */
+	case 0x84: return KEY_NUMERIC_POUND;		/*   #          */
+	case 0x81: return KEY_NUMERIC_STAR;		/*   *          */
+	case 0x18: return KEY_ENTER;			/*   pickup     */
+	case 0x28: return KEY_ESC;			/*   hangup     */
+	case 0x48: return KEY_LEFT;			/* left arrow   */
+	case 0x88: return KEY_RIGHT;			/* right arrow  */
+	default:   return special_keymap(scancode);
+	}
+}
+
 static unsigned short (*keymap)(int) = keymap_kip1000;
 
 /*
@@ -840,6 +871,10 @@ static int __init cm109_select_keymap(void)
 		keymap = keymap_usbph01;
 		printk(KERN_INFO KBUILD_MODNAME ": "
 			"Keymap for Allied-Telesis Corega USBPH01 phone loaded\n");
+	} else if (!strcasecmp(phone, "atcom")) {
+		keymap = keymap_atcom;
+		printk(KERN_INFO KBUILD_MODNAME ": "
+			"Keymap for ATCom AU-100 phone loaded\n");
 	} else {
 		printk(KERN_ERR KBUILD_MODNAME ": "
 			"Unsupported phone: %s\n", phone);

drivers/input/mouse/hgpk.c

@@ -125,7 +125,7 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
  */
 static int hgpk_validate_byte(unsigned char *packet)
 {
-	return (packet[0] & 0x0C) == 0x08;
+	return (packet[0] & 0x0C) != 0x08;
 }
 
 static void hgpk_process_packet(struct psmouse *psmouse)

drivers/input/serio/i8042-x86ia64io.h

@@ -337,6 +337,20 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
 		},
 	},
+	{
+		.ident = "Dell XPS M1530",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+		},
+	},
+	{
+		.ident = "Compal HEL80I",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+		},
+	},
 	{ }
 };
 

drivers/input/tablet/wacom.h

@@ -66,6 +66,7 @@
  *		   - Support Intuos3 4x6
  *      v1.47 (pc) - Added support for Bamboo
  *      v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
+ *      v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
  */
 
 /*
@@ -86,7 +87,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.48"
+#define DRIVER_VERSION "v1.49"
 #define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
 #define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
 #define DRIVER_LICENSE "GPL"
@@ -103,15 +104,15 @@ struct wacom {
 	struct usb_device *usbdev;
 	struct usb_interface *intf;
 	struct urb *irq;
-	struct wacom_wac * wacom_wac;
+	struct wacom_wac *wacom_wac;
 	struct mutex lock;
 	unsigned int open:1;
 	char phys[32];
 };
 
 struct wacom_combo {
-	struct wacom * wacom;
-	struct urb * urb;
+	struct wacom *wacom;
+	struct urb *urb;
 };
 
 extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
@@ -132,7 +133,7 @@ extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wa
 extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
 extern __u16 wacom_le16_to_cpu(unsigned char *data);
 extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
+extern struct wacom_features *get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id *get_device_table(void);
 
 #endif

drivers/input/tablet/wacom_wac.c

@@ -535,31 +535,147 @@ static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
 	return 1;
 }
 
+int wacom_tpc_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	char *data = wacom->data;
+	int prox = 0, pressure;
+	static int stylusInProx, touchInProx = 1, touchOut;
+	struct urb *urb = ((struct wacom_combo *)wcombo)->urb;
+
+	dbg("wacom_tpc_irq: received report #%d", data[0]);
+
+	if (urb->actual_length == 5 || data[0] == 6) { /* Touch data */
+		if (urb->actual_length == 5) {  /* with touch */
+			prox = data[0] & 0x03;
+		} else {  /* with capacity */
+			prox = data[1] & 0x03;
+		}
+
+		if (!stylusInProx) { /* stylus not in prox */
+			if (prox) {
+				if (touchInProx) {
+					wacom->tool[1] = BTN_TOOL_DOUBLETAP;
+					wacom->id[0] = TOUCH_DEVICE_ID;
+					if (urb->actual_length != 5) {
+						wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+						wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+						wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+						wacom_report_key(wcombo, BTN_TOUCH, wacom_le16_to_cpu(&data[6]));
+					} else {
+						wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+						wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+						wacom_report_key(wcombo, BTN_TOUCH, 1);
+					}
+					wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+					wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+					touchOut = 1;
+					return 1;
+				}
+			} else {
+				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+				wacom_report_key(wcombo, wacom->tool[1], prox & 0x01);
+				wacom_report_key(wcombo, BTN_TOUCH, 0);
+				touchOut = 0;
+				touchInProx = 1;
+				return 1;
+			}
+		} else if (touchOut || !prox) { /* force touch out-prox */
+			wacom_report_abs(wcombo, ABS_MISC, TOUCH_DEVICE_ID);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			touchOut = 0;
+			touchInProx = 1;
+			return 1;
+		}
+	} else if (data[0] == 2) { /* Penabled */
+		prox = data[1] & 0x20;
+
+		touchInProx = 0;
+
+		wacom->id[0] = ERASER_DEVICE_ID;
+
+		/*
+		 * if going from out of proximity into proximity select between the eraser
+		 * and the pen based on the state of the stylus2 button, choose eraser if
+		 * pressed else choose pen. if not a proximity change from out to in, send
+		 * an out of proximity for previous tool then a in for new tool.
+		 */
+		if (prox) { /* in prox */
+			if (!wacom->tool[0]) {
+				/* Going into proximity select tool */
+				wacom->tool[1] = (data[1] & 0x08) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+				if (wacom->tool[1] == BTN_TOOL_PEN)
+					wacom->id[0] = STYLUS_DEVICE_ID;
+			} else if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[1] & 0x08)) {
+				/*
+				 * was entered with stylus2 pressed
+				 * report out proximity for previous tool
+				*/
+				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+				wacom_report_key(wcombo, wacom->tool[1], 0);
+				wacom_input_sync(wcombo);
+
+				/* set new tool */
+				wacom->tool[1] = BTN_TOOL_PEN;
+				wacom->id[0] = STYLUS_DEVICE_ID;
+				return 0;
+			}
+			if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+				/* Unknown tool selected default to pen tool */
+				wacom->tool[1] = BTN_TOOL_PEN;
+				wacom->id[0] = STYLUS_DEVICE_ID;
+			}
+			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+			pressure = ((data[7] & 0x01) << 8) | data[6];
+			if (pressure < 0)
+				pressure = wacom->features->pressure_max + pressure + 1;
+			wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+			wacom_report_key(wcombo, BTN_TOUCH, pressure);
+		} else {
+			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+			wacom_report_key(wcombo, BTN_STYLUS, 0);
+			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+		}
+		wacom_report_key(wcombo, wacom->tool[1], prox);
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]);
+		stylusInProx = prox;
+		wacom->tool[0] = prox;
+		return 1;
+	}
+	return 0;
+}
+
 int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
 {
 	switch (wacom_wac->features->type) {
 		case PENPARTNER:
-			return (wacom_penpartner_irq(wacom_wac, wcombo));
-			break;
+			return wacom_penpartner_irq(wacom_wac, wcombo);
+
 		case PL:
-			return (wacom_pl_irq(wacom_wac, wcombo));
-			break;
+			return wacom_pl_irq(wacom_wac, wcombo);
+
 		case WACOM_G4:
 		case GRAPHIRE:
 		case WACOM_MO:
-			return (wacom_graphire_irq(wacom_wac, wcombo));
-			break;
+			return wacom_graphire_irq(wacom_wac, wcombo);
+
 		case PTU:
-			return (wacom_ptu_irq(wacom_wac, wcombo));
-			break;
+			return wacom_ptu_irq(wacom_wac, wcombo);
+
 		case INTUOS:
 		case INTUOS3S:
 		case INTUOS3:
 		case INTUOS3L:
 		case CINTIQ:
 		case WACOM_BEE:
-			return (wacom_intuos_irq(wacom_wac, wcombo));
-			break;
+			return wacom_intuos_irq(wacom_wac, wcombo);
+
+		case TABLETPC:
+			return wacom_tpc_irq(wacom_wac, wcombo);
+
 		default:
 			return 0;
 	}
@@ -586,13 +702,15 @@ void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_w
 			/* fall through */
 		case INTUOS3S:
 			input_dev_i3s(input_dev, wacom_wac);
+			/* fall through */
 		case INTUOS:
 			input_dev_i(input_dev, wacom_wac);
 			break;
 		case PL:
 		case PTU:
+		case TABLETPC:
 			input_dev_pl(input_dev, wacom_wac);
-			break;
+			/* fall through */
 		case PENPARTNER:
 			input_dev_pt(input_dev, wacom_wac);
 			break;
@@ -611,6 +729,7 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Graphire4 6x8", 8,  16704, 12064,  511, 63, WACOM_G4 },
 	{ "Wacom BambooFun 4x5", 9,  14760,  9225,  511, 63, WACOM_MO },
 	{ "Wacom BambooFun 6x8", 9,  21648, 13530,  511, 63, WACOM_MO },
+	{ "Wacom Bamboo1 Medium",8,  16704, 12064,  511, 63, GRAPHIRE },
 	{ "Wacom Volito",        8,   5104,  3712,  511, 63, GRAPHIRE },
 	{ "Wacom PenStation2",   8,   3250,  2320,  255, 63, GRAPHIRE },
 	{ "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
@@ -650,6 +769,10 @@ static struct wacom_features wacom_features[] = {
 	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
 	{ "Wacom Cintiq 20WSX",  10, 86680, 54180, 1023, 63, WACOM_BEE },
 	{ "Wacom Cintiq 12WX",   10, 53020, 33440, 1023, 63, WACOM_BEE },
+	{ "Wacom DTU1931",        8, 37832, 30305,  511,  0, PL },
+	{ "Wacom ISDv4 90",       8, 26202, 16325,  255,  0, TABLETPC },
+	{ "Wacom ISDv4 93",       8, 26202, 16325,  255,  0, TABLETPC },
+	{ "Wacom ISDv4 9A",       8, 26202, 16325,  255,  0, TABLETPC },
 	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
 	{ }
 };
@@ -665,6 +788,7 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x17) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x18) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x19) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
@@ -704,18 +828,26 @@ static struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC5) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC6) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC7) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x90) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x93) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x9A) },
 	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
 	{ }
 };
 
-const struct usb_device_id * get_device_table(void) {
-        const struct usb_device_id * id_table = wacom_ids;
+const struct usb_device_id *get_device_table(void)
+{
+        const struct usb_device_id *id_table = wacom_ids;
+
         return id_table;
 }
 
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+struct wacom_features * get_wacom_feature(const struct usb_device_id *id)
+{
         int index = id - wacom_ids;
         struct wacom_features *wf = &wacom_features[index];
+
         return wf;
 }
 

drivers/input/tablet/wacom_wac.h

@@ -10,6 +10,7 @@
 #define WACOM_WAC_H
 
 #define STYLUS_DEVICE_ID	0x02
+#define TOUCH_DEVICE_ID		0x03
 #define CURSOR_DEVICE_ID	0x06
 #define ERASER_DEVICE_ID	0x0A
 #define PAD_DEVICE_ID		0x0F
@@ -27,6 +28,7 @@ enum {
 	CINTIQ,
 	WACOM_BEE,
 	WACOM_MO,
+	TABLETPC,
 	MAX_TYPE
 };
 
@@ -38,6 +40,8 @@ struct wacom_features {
 	int pressure_max;
 	int distance_max;
 	int type;
+	int touch_x_max;
+	int touch_y_max;
 };
 
 struct wacom_wac {

drivers/input/touchscreen/elo.c

@@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo)
 		input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
 	printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
-		"features: %x02x, controller: 0x%02x\n",
+		"features: 0x%02x, controller: 0x%02x\n",
 		elo_types[(packet[1] -'0') & 0x03],
 		packet[5], packet[4], packet[3], packet[7]);