ath9k: turn off RXIQ calibration while re-calibrating radio

TXIQ and RXIQ share the same data path to upload the measurement
result, we should turn off RXIQ calibration while re-calibrating radio
Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_mci.c

@@ -750,6 +750,9 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	mci_hw->bt_state = MCI_BT_AWAKE;
 
+	REG_CLR_BIT(ah, AR_PHY_TIMING4,
+		    1 << AR_PHY_TIMING_CONTROL4_DO_GAIN_DC_IQ_CAL_SHIFT);
+
 	if (caldata) {
 		caldata->done_txiqcal_once = false;
 		caldata->done_txclcal_once = false;
@@ -759,6 +762,9 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (!ath9k_hw_init_cal(ah, chan))
 		return -EIO;
 
+	REG_SET_BIT(ah, AR_PHY_TIMING4,
+		    1 << AR_PHY_TIMING_CONTROL4_DO_GAIN_DC_IQ_CAL_SHIFT);
+
 exit:
 	ar9003_mci_enable_interrupt(ah);
 	return 0;

drivers/net/wireless/ath/ath9k/ar9003_phy.h

@@ -32,6 +32,7 @@
 #define AR_PHY_SPUR_REG     (AR_CHAN_BASE + 0x1c)
 #define AR_PHY_RX_IQCAL_CORR_B0    (AR_CHAN_BASE + 0xdc)
 #define AR_PHY_TX_IQCAL_CONTROL_3  (AR_CHAN_BASE + 0xb0)
+#define AR_PHY_TIMING_CONTROL4_DO_GAIN_DC_IQ_CAL_SHIFT 16
 
 #define AR_PHY_TIMING11_SPUR_FREQ_SD    0x3FF00000
 #define AR_PHY_TIMING11_SPUR_FREQ_SD_S  20