serial/sc16is7xx: Use the rs485 functions on serial_core

In order to unify all the rs485 ioctl handling.
Use the implementation of TIOC[GS]RS485 ioctl handling on serial_core.
Reviewed-by: Alan Cox <alan@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sc16is7xx.c

@@ -304,8 +304,6 @@ struct sc16is7xx_one {
 	struct uart_port		port;
 	struct work_struct		tx_work;
 	struct work_struct		md_work;
-
-	struct serial_rs485		rs485;
 };
 
 struct sc16is7xx_port {
@@ -657,15 +655,15 @@ static void sc16is7xx_stop_tx(struct uart_port* port)
 	struct circ_buf *xmit = &one->port.state->xmit;
 
 	/* handle rs485 */
-	if (one->rs485.flags & SER_RS485_ENABLED) {
+	if (port->rs485.flags & SER_RS485_ENABLED) {
 		/* do nothing if current tx not yet completed */
 		int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
 		if (!(lsr & SC16IS7XX_LSR_TEMT_BIT))
 			return;
 
 		if (uart_circ_empty(xmit) &&
-		    (one->rs485.delay_rts_after_send > 0))
-			mdelay(one->rs485.delay_rts_after_send);
+		    (port->rs485.delay_rts_after_send > 0))
+			mdelay(port->rs485.delay_rts_after_send);
 	}
 
 	sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
@@ -688,9 +686,9 @@ static void sc16is7xx_start_tx(struct uart_port *port)
 	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
 
 	/* handle rs485 */
-	if ((one->rs485.flags & SER_RS485_ENABLED) &&
-	    (one->rs485.delay_rts_before_send > 0)) {
-		mdelay(one->rs485.delay_rts_before_send);
+	if ((port->rs485.flags & SER_RS485_ENABLED) &&
+	    (port->rs485.delay_rts_before_send > 0)) {
+		mdelay(port->rs485.delay_rts_before_send);
 	}
 
 	if (!work_pending(&one->tx_work))
@@ -830,47 +828,20 @@ static void sc16is7xx_set_termios(struct uart_port *port,
 	uart_update_timeout(port, termios->c_cflag, baud);
 }
 
-static void sc16is7xx_config_rs485(struct uart_port *port,
+static int sc16is7xx_config_rs485(struct uart_port *port,
 				   struct serial_rs485 *rs485)
 {
-	struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
-
-	one->rs485 = *rs485;
-
-	if (one->rs485.flags & SER_RS485_ENABLED) {
+	if (port->rs485.flags & SER_RS485_ENABLED)
 		sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
 				      SC16IS7XX_EFCR_AUTO_RS485_BIT,
 				      SC16IS7XX_EFCR_AUTO_RS485_BIT);
-	} else {
+	else
 		sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
 				      SC16IS7XX_EFCR_AUTO_RS485_BIT,
 				      0);
-	}
-}
-
-static int sc16is7xx_ioctl(struct uart_port *port, unsigned int cmd,
-			   unsigned long arg)
-{
-	struct serial_rs485 rs485;
+	port->rs485 = *rs485;
 
-	switch (cmd) {
-	case TIOCSRS485:
-		if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485)))
-			return -EFAULT;
-
-		sc16is7xx_config_rs485(port, &rs485);
-		return 0;
-	case TIOCGRS485:
-		if (copy_to_user((void __user *)arg,
-				 &(to_sc16is7xx_one(port, port)->rs485),
-				 sizeof(rs485)))
-			return -EFAULT;
-		return 0;
-	default:
-		break;
-	}
-
-	return -ENOIOCTLCMD;
+	return 0;
 }
 
 static int sc16is7xx_startup(struct uart_port *port)
@@ -996,7 +967,6 @@ static const struct uart_ops sc16is7xx_ops = {
 	.release_port	= sc16is7xx_null_void,
 	.config_port	= sc16is7xx_config_port,
 	.verify_port	= sc16is7xx_verify_port,
-	.ioctl		= sc16is7xx_ioctl,
 	.pm		= sc16is7xx_pm,
 };
 
@@ -1126,6 +1096,7 @@ static int sc16is7xx_probe(struct device *dev,
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
+		s->p[i].port.rs485_config = sc16is7xx_config_rs485;
 		s->p[i].port.ops	= &sc16is7xx_ops;
 		/* Disable all interrupts */
 		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);