Commit b580b899 authored by Russell King's avatar Russell King

ARM: GIC: provide a single initialization function for boot CPU

Provide gic_init() which initializes the GIC distributor and current
CPU's GIC interface for the boot (or single) CPU.
Reviewed-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Tested-by: default avatarAbhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent e745a667
......@@ -213,8 +213,8 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
set_irq_chained_handler(irq, gic_handle_cascade_irq);
}
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
static void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
......@@ -314,6 +314,13 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
writel(1, base + GIC_CPU_CTRL);
}
void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
gic_dist_init(gic_nr, dist_base, irq_start);
gic_cpu_init(gic_nr, cpu_base);
}
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
......
......@@ -33,8 +33,8 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
#endif
......
......@@ -74,8 +74,8 @@ void __iomem *gic_cpu_base_addr;
void __init cns3xxx_init_irq(void)
{
gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
gic_cpu_base_addr);
}
void cns3xxx_power_off(void)
......
......@@ -44,9 +44,8 @@ static void __init msm8x60_init_irq(void)
{
unsigned int i;
gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START);
gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
gic_cpu_init(0, MSM_QGIC_CPU_BASE);
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, gic_cpu_base_addr);
/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
......
......@@ -35,12 +35,12 @@ void __init gic_init_irq(void)
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
gic_dist_init(0, gic_dist_base_addr, 29);
/* Static mapping, never released */
gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!gic_cpu_base_addr);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, gic_dist_base_addr, gic_cpu_base_addr);
}
#ifdef CONFIG_CACHE_L2X0
......
......@@ -365,20 +365,20 @@ static void __init gic_init_irq(void)
/* core tile GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_EB11MP_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
gic_cpu_base_addr);
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64);
gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
__io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
#endif
} else {
/* board GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
gic_cpu_base_addr);
}
}
......
......@@ -305,12 +305,14 @@ static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, IRQ_DC1176_GIC_START,
__io_address(REALVIEW_DC1176_GIC_DIST_BASE),
gic_cpu_base_addr);
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START);
gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
gic_init(1, IRQ_PB1176_GIC_START,
__io_address(REALVIEW_PB1176_GIC_DIST_BASE),
__io_address(REALVIEW_PB1176_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
}
......
......@@ -310,12 +310,13 @@ static void __init gic_init_irq(void)
/* ARM11MPCore test chip GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
gic_cpu_base_addr);
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START);
gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
gic_init(1, IRQ_PB11MP_GIC_START,
__io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
__io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
}
......
......@@ -274,8 +274,9 @@ static void __init gic_init_irq(void)
{
/* ARM PB-A8 on-board GIC */
gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START);
gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
gic_init(0, IRQ_PBA8_GIC_START,
__io_address(REALVIEW_PBA8_GIC_DIST_BASE),
__io_address(REALVIEW_PBA8_GIC_CPU_BASE));
}
static void __init realview_pba8_timer_init(void)
......
......@@ -314,14 +314,13 @@ static void __init gic_init_irq(void)
/* ARM PBX on-board GIC */
if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
29);
gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
__io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
} else {
gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
IRQ_PBX_GIC_START);
gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
gic_init(0, IRQ_PBX_GIC_START,
__io_address(REALVIEW_PBX_GIC_DIST_BASE),
__io_address(REALVIEW_PBX_GIC_CPU_BASE));
}
}
......
......@@ -123,8 +123,7 @@ void __init s5pv310_init_irq(void)
int irq;
gic_cpu_base_addr = S5P_VA_GIC_CPU;
gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
gic_cpu_init(0, S5P_VA_GIC_CPU);
gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
......
......@@ -94,8 +94,8 @@ void __init tegra_init_irq(void)
writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS);
}
gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29);
gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
gic = get_irq_chip(29);
gic_unmask_irq = gic->unmask;
......
......@@ -61,8 +61,8 @@ void __init ux500_init_devices(void)
void __init ux500_init_irq(void)
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
__io_address(UX500_GIC_CPU_BASE));
/*
* Init clocks here so that they are available for system timer
......
......@@ -65,8 +65,7 @@ void __iomem *gic_cpu_base_addr;
static void __init ct_ca9x4_init_irq(void)
{
gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST), gic_cpu_base_addr);
}
#if 0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment