Commit b5f6a90a authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare

hwmon: (w83795) Move PWM attributes to a dedidated array

Use a dedicated 2D array for PWM attributes. This way, PWM attributes
are handled the same way as other attributes, this is more consistent.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 87df0dad
......@@ -1470,7 +1470,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) }
#define SENSOR_ATTR_PWM(index) \
#define SENSOR_ATTR_PWM(index) { \
SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
store_pwm, PWM_OUTPUT, index - 1), \
SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
......@@ -1482,7 +1482,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
SENSOR_ATTR_2(fan##index##_div, S_IWUSR | S_IRUGO, \
show_pwm, store_pwm, PWM_DIV, index - 1), \
SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
show_pwm_enable, store_pwm_enable, NOT_USED, index - 1)
show_pwm_enable, store_pwm_enable, NOT_USED, index - 1) }
#define SENSOR_ATTR_FANIN_TARGET(index) \
SENSOR_ATTR_2(speed_cruise##index##_target, S_IWUSR | S_IRUGO, \
......@@ -1641,13 +1641,11 @@ static struct sensor_device_attribute_2 w83795_static[] = {
SENSOR_ATTR_FANIN_TARGET(6),
SENSOR_ATTR_FANIN_TARGET(7),
SENSOR_ATTR_FANIN_TARGET(8),
SENSOR_ATTR_PWM(1),
SENSOR_ATTR_PWM(2),
};
/* all registers existed in 795g than 795adg,
* like PWM3 - PWM8 */
static struct sensor_device_attribute_2 w83795_left_reg[] = {
static struct sensor_device_attribute_2 w83795_pwm[][6] = {
SENSOR_ATTR_PWM(1),
SENSOR_ATTR_PWM(2),
SENSOR_ATTR_PWM(3),
SENSOR_ATTR_PWM(4),
SENSOR_ATTR_PWM(5),
......@@ -1809,9 +1807,9 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
return err;
}
if (data->chip_type == w83795g) {
for (i = 0; i < ARRAY_SIZE(w83795_left_reg); i++) {
err = fn(dev, &w83795_left_reg[i].dev_attr);
for (i = 0; i < data->has_pwm; i++) {
for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
err = fn(dev, &w83795_pwm[i][j].dev_attr);
if (err)
return err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment