Commit b615d3d4 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'pwm/for-4.6-rc1' of...

Merge tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "No new drivers this time around, but a handful of cleanups and fixes"

* tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: omap-dmtimer: Add debug message for effective period and duty cycle
  pwm: omap-dmtimer: Round load and match values rather than truncate
  pwm: omap-dmtimer: Add sanity checking for load and match values
  pwm: omap-dmtimer: Fix inaccurate period and duty cycle calculations
  pwm: brcmstb: Fix check of devm_ioremap_resource() return code
  pwm: rcar: Depend on ARCH_RENESAS instead of ARCH_SHMOBILE
  pwm: lpc18xx-sct: Test clock rate to avoid division by 0
  pwm: img: Test clock rate to avoid division by 0
parents ed7d6bc2 922201d1
......@@ -316,7 +316,7 @@ config PWM_RCAR
config PWM_RENESAS_TPU
tristate "Renesas TPU PWM support"
depends on ARCH_SHMOBILE || COMPILE_TEST
depends on ARCH_RENESAS || COMPILE_TEST
depends on HAS_IOMEM
help
This driver exposes the Timer Pulse Unit (TPU) PWM controller found
......
......@@ -274,8 +274,8 @@ static int brcmstb_pwm_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
p->base = devm_ioremap_resource(&pdev->dev, res);
if (!p->base) {
ret = -ENOMEM;
if (IS_ERR(p->base)) {
ret = PTR_ERR(p->base);
goto out_clk;
}
......
......@@ -237,6 +237,11 @@ static int img_pwm_probe(struct platform_device *pdev)
}
clk_rate = clk_get_rate(pwm->pwm_clk);
if (!clk_rate) {
dev_err(&pdev->dev, "pwm clock has no frequency\n");
ret = -EINVAL;
goto disable_pwmclk;
}
/* The maximum input clock divider is 512 */
val = (u64)NSEC_PER_SEC * 512 * pwm->data->max_timebase;
......
......@@ -360,6 +360,11 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
}
lpc18xx_pwm->clk_rate = clk_get_rate(lpc18xx_pwm->pwm_clk);
if (!lpc18xx_pwm->clk_rate) {
dev_err(&pdev->dev, "pwm clock has no frequency\n");
ret = -EINVAL;
goto disable_pwmclk;
}
mutex_init(&lpc18xx_pwm->res_lock);
mutex_init(&lpc18xx_pwm->period_lock);
......
......@@ -31,6 +31,7 @@
#include <linux/time.h>
#define DM_TIMER_LOAD_MIN 0xfffffffe
#define DM_TIMER_MAX 0xffffffff
struct pwm_omap_dmtimer_chip {
struct pwm_chip chip;
......@@ -46,13 +47,9 @@ to_pwm_omap_dmtimer_chip(struct pwm_chip *chip)
return container_of(chip, struct pwm_omap_dmtimer_chip, chip);
}
static int pwm_omap_dmtimer_calc_value(unsigned long clk_rate, int ns)
static u32 pwm_omap_dmtimer_get_clock_cycles(unsigned long clk_rate, int ns)
{
u64 c = (u64)clk_rate * ns;
do_div(c, NSEC_PER_SEC);
return DM_TIMER_LOAD_MIN - c;
return DIV_ROUND_CLOSEST_ULL((u64)clk_rate * ns, NSEC_PER_SEC);
}
static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap)
......@@ -99,12 +96,14 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
int duty_ns, int period_ns)
{
struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
int load_value, match_value;
u32 period_cycles, duty_cycles;
u32 load_value, match_value;
struct clk *fclk;
unsigned long clk_rate;
bool timer_active;
dev_dbg(chip->dev, "duty cycle: %d, period %d\n", duty_ns, period_ns);
dev_dbg(chip->dev, "requested duty cycle: %d ns, period: %d ns\n",
duty_ns, period_ns);
mutex_lock(&omap->mutex);
if (duty_ns == pwm_get_duty_cycle(pwm) &&
......@@ -117,15 +116,13 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
fclk = omap->pdata->get_fclk(omap->dm_timer);
if (!fclk) {
dev_err(chip->dev, "invalid pmtimer fclk\n");
mutex_unlock(&omap->mutex);
return -EINVAL;
goto err_einval;
}
clk_rate = clk_get_rate(fclk);
if (!clk_rate) {
dev_err(chip->dev, "invalid pmtimer fclk rate\n");
mutex_unlock(&omap->mutex);
return -EINVAL;
goto err_einval;
}
dev_dbg(chip->dev, "clk rate: %luHz\n", clk_rate);
......@@ -133,11 +130,51 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
/*
* Calculate the appropriate load and match values based on the
* specified period and duty cycle. The load value determines the
* cycle time and the match value determines the duty cycle.
* period time and the match value determines the duty time.
*
* The period lasts for (DM_TIMER_MAX-load_value+1) clock cycles.
* Similarly, the active time lasts (match_value-load_value+1) cycles.
* The non-active time is the remainder: (DM_TIMER_MAX-match_value)
* clock cycles.
*
* NOTE: It is required that: load_value <= match_value < DM_TIMER_MAX
*
* References:
* OMAP4430/60/70 TRM sections 22.2.4.10 and 22.2.4.11
* AM335x Sitara TRM sections 20.1.3.5 and 20.1.3.6
*/
load_value = pwm_omap_dmtimer_calc_value(clk_rate, period_ns);
match_value = pwm_omap_dmtimer_calc_value(clk_rate,
period_ns - duty_ns);
period_cycles = pwm_omap_dmtimer_get_clock_cycles(clk_rate, period_ns);
duty_cycles = pwm_omap_dmtimer_get_clock_cycles(clk_rate, duty_ns);
if (period_cycles < 2) {
dev_info(chip->dev,
"period %d ns too short for clock rate %lu Hz\n",
period_ns, clk_rate);
goto err_einval;
}
if (duty_cycles < 1) {
dev_dbg(chip->dev,
"duty cycle %d ns is too short for clock rate %lu Hz\n",
duty_ns, clk_rate);
dev_dbg(chip->dev, "using minimum of 1 clock cycle\n");
duty_cycles = 1;
} else if (duty_cycles >= period_cycles) {
dev_dbg(chip->dev,
"duty cycle %d ns is too long for period %d ns at clock rate %lu Hz\n",
duty_ns, period_ns, clk_rate);
dev_dbg(chip->dev, "using maximum of 1 clock cycle less than period\n");
duty_cycles = period_cycles - 1;
}
dev_dbg(chip->dev, "effective duty cycle: %lld ns, period: %lld ns\n",
DIV_ROUND_CLOSEST_ULL((u64)NSEC_PER_SEC * duty_cycles,
clk_rate),
DIV_ROUND_CLOSEST_ULL((u64)NSEC_PER_SEC * period_cycles,
clk_rate));
load_value = (DM_TIMER_MAX - period_cycles) + 1;
match_value = load_value + duty_cycles - 1;
/*
* We MUST stop the associated dual-mode timer before attempting to
......@@ -166,6 +203,11 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
mutex_unlock(&omap->mutex);
return 0;
err_einval:
mutex_unlock(&omap->mutex);
return -EINVAL;
}
static int pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment