staging: unisys: visorbus: merge vbusdeviceinfo.h into vbuschannel

vbusdeviceinfo.h was only used by vbuschannel.h so merge them
together.
Signed-off-by: David Kershner <david.kershner@unisys.com>
Reviewed-by: Tim Sell <Timothy.Sell@unisys.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/unisys/visorbus/vbuschannel.h

@@ -23,7 +23,6 @@
  *  the client devices and client drivers for the server end to see.
  */
 #include <linux/uuid.h>
-#include "vbusdeviceinfo.h"
 #include "channel.h"
 
 /* {193b331b-c58f-11da-95a9-00e08161165f} */
@@ -58,6 +57,217 @@ static const uuid_le spar_vbus_channel_protocol_uuid =
 				   actual_bytes))
 
 #pragma pack(push, 1)		/* both GCC and VC now allow this pragma */
+
+/*
+ * An array of this struct is present in the channel area for each vbus.
+ * (See vbuschannel.h.)
+ * It is filled in by the client side to provide info about the device
+ * and driver from the client's perspective.
+ */
+struct ultra_vbus_deviceinfo {
+	u8 devtype[16];		/* short string identifying the device type */
+	u8 drvname[16];		/* driver .sys file name */
+	u8 infostrs[96];	/* sequence of tab-delimited id strings: */
+	/* <DRIVER_REV> <DRIVER_VERTAG> <DRIVER_COMPILETIME> */
+	u8 reserved[128];	/* pad size to 256 bytes */
+};
+
+/**
+ * vbuschannel_sanitize_buffer() - remove non-printable chars from buffer
+ * @p: destination buffer where chars are written to
+ * @remain: number of bytes that can be written starting at #p
+ * @src: pointer to source buffer
+ * @srcmax: number of valid characters at #src
+ *
+ * Reads chars from the buffer at @src for @srcmax bytes, and writes to
+ * the buffer at @p, which is @remain bytes long, ensuring never to
+ * overflow the buffer at @p, using the following rules:
+ * - printable characters are simply copied from the buffer at @src to the
+ *   buffer at @p
+ * - intervening streaks of non-printable characters in the buffer at @src
+ *   are replaced with a single space in the buffer at @p
+ * Note that we pay no attention to '\0'-termination.
+ *
+ * Pass @p == NULL and @remain == 0 for this special behavior -- In this
+ * case, we simply return the number of bytes that WOULD HAVE been written
+ * to a buffer at @p, had it been infinitely big.
+ *
+ * Return: the number of bytes written to @p (or WOULD HAVE been written to
+ *         @p, as described in the previous paragraph)
+ */
+static inline int
+vbuschannel_sanitize_buffer(char *p, int remain, char *src, int srcmax)
+{
+	int chars = 0;
+	int nonprintable_streak = 0;
+
+	while (srcmax > 0) {
+		if ((*src >= ' ') && (*src < 0x7f)) {
+			if (nonprintable_streak) {
+				if (remain > 0) {
+					*p = ' ';
+					p++;
+					remain--;
+					chars++;
+				} else if (!p) {
+					chars++;
+				}
+				nonprintable_streak = 0;
+			}
+			if (remain > 0) {
+				*p = *src;
+				p++;
+				remain--;
+				chars++;
+			} else if (!p) {
+				chars++;
+			}
+		} else {
+			nonprintable_streak = 1;
+		}
+		src++;
+		srcmax--;
+	}
+	return chars;
+}
+
+#define VBUSCHANNEL_ADDACHAR(ch, p, remain, chars) \
+	do {					   \
+		if (remain <= 0)		   \
+			break;			   \
+		*p = ch;			   \
+		p++;  chars++;  remain--;	   \
+	} while (0)
+
+/**
+ * vbuschannel_itoa() - convert non-negative int to string
+ * @p: destination string
+ * @remain: max number of bytes that can be written to @p
+ * @num: input int to convert
+ *
+ * Converts the non-negative value at @num to an ascii decimal string
+ * at @p, writing at most @remain bytes.  Note there is NO '\0' termination
+ * written to @p.
+ *
+ * Return: number of bytes written to @p
+ *
+ */
+static inline int
+vbuschannel_itoa(char *p, int remain, int num)
+{
+	int digits = 0;
+	char s[32];
+	int i;
+
+	if (num == 0) {
+		/* '0' is a special case */
+		if (remain <= 0)
+			return 0;
+		*p = '0';
+		return 1;
+	}
+	/* form a backwards decimal ascii string in <s> */
+	while (num > 0) {
+		if (digits >= (int)sizeof(s))
+			return 0;
+		s[digits++] = (num % 10) + '0';
+		num = num / 10;
+	}
+	if (remain < digits) {
+		/* not enough room left at <p> to hold number, so fill with
+		 * '?'
+		 */
+		for (i = 0; i < remain; i++, p++)
+			*p = '?';
+		return remain;
+	}
+	/* plug in the decimal ascii string representing the number, by */
+	/* reversing the string we just built in <s> */
+	i = digits;
+	while (i > 0) {
+		i--;
+		*p = s[i];
+		p++;
+	}
+	return digits;
+}
+
+/**
+ * vbuschannel_devinfo_to_string() - format a struct ultra_vbus_deviceinfo
+ *                                   to a printable string
+ * @devinfo: the struct ultra_vbus_deviceinfo to format
+ * @p: destination string area
+ * @remain: size of destination string area in bytes
+ * @devix: the device index to be included in the output data, or -1 if no
+ *         device index is to be included
+ *
+ * Reads @devInfo, and converts its contents to a printable string at @p,
+ * writing at most @remain bytes. Note there is NO '\0' termination
+ * written to @p.
+ *
+ * Return: number of bytes written to @p
+ */
+static inline int
+vbuschannel_devinfo_to_string(struct ultra_vbus_deviceinfo *devinfo,
+			      char *p, int remain, int devix)
+{
+	char *psrc;
+	int nsrc, x, i, pad;
+	int chars = 0;
+
+	psrc = &devinfo->devtype[0];
+	nsrc = sizeof(devinfo->devtype);
+	if (vbuschannel_sanitize_buffer(NULL, 0, psrc, nsrc) <= 0)
+		return 0;
+
+	/* emit device index */
+	if (devix >= 0) {
+		VBUSCHANNEL_ADDACHAR('[', p, remain, chars);
+		x = vbuschannel_itoa(p, remain, devix);
+		p += x;
+		remain -= x;
+		chars += x;
+		VBUSCHANNEL_ADDACHAR(']', p, remain, chars);
+	} else {
+		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+	}
+
+	/* emit device type */
+	x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
+	p += x;
+	remain -= x;
+	chars += x;
+	pad = 15 - x;		/* pad device type to be exactly 15 chars */
+	for (i = 0; i < pad; i++)
+		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+	VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+
+	/* emit driver name */
+	psrc = &devinfo->drvname[0];
+	nsrc = sizeof(devinfo->drvname);
+	x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
+	p += x;
+	remain -= x;
+	chars += x;
+	pad = 15 - x;		/* pad driver name to be exactly 15 chars */
+	for (i = 0; i < pad; i++)
+		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+	VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
+
+	/* emit strings */
+	psrc = &devinfo->infostrs[0];
+	nsrc = sizeof(devinfo->infostrs);
+	x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
+	p += x;
+	remain -= x;
+	chars += x;
+	VBUSCHANNEL_ADDACHAR('\n', p, remain, chars);
+
+	return chars;
+}
+
 struct spar_vbus_headerinfo {
 	u32 struct_bytes;	/* size of this struct in bytes */
 	u32 device_info_struct_bytes;	/* sizeof(ULTRA_VBUS_DEVICEINFO) */

drivers/staging/unisys/visorbus/vbusdeviceinfo.h

-/* Copyright (C) 2010 - 2015 UNISYS CORPORATION
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT.  See the GNU General Public License for more
- * details.
- */
-
-#ifndef __VBUSDEVICEINFO_H__
-#define __VBUSDEVICEINFO_H__
-
-#include <linux/types.h>
-
-#pragma pack(push, 1)		/* both GCC and VC now allow this pragma */
-
-/*
- * An array of this struct is present in the channel area for each vbus.
- * (See vbuschannel.h.)
- * It is filled in by the client side to provide info about the device
- * and driver from the client's perspective.
- */
-struct ultra_vbus_deviceinfo {
-	u8 devtype[16];		/* short string identifying the device type */
-	u8 drvname[16];		/* driver .sys file name */
-	u8 infostrs[96];	/* sequence of tab-delimited id strings: */
-	/* <DRIVER_REV> <DRIVER_VERTAG> <DRIVER_COMPILETIME> */
-	u8 reserved[128];	/* pad size to 256 bytes */
-};
-
-#pragma pack(pop)
-
-/**
- * vbuschannel_sanitize_buffer() - remove non-printable chars from buffer
- * @p: destination buffer where chars are written to
- * @remain: number of bytes that can be written starting at #p
- * @src: pointer to source buffer
- * @srcmax: number of valid characters at #src
- *
- * Reads chars from the buffer at @src for @srcmax bytes, and writes to
- * the buffer at @p, which is @remain bytes long, ensuring never to
- * overflow the buffer at @p, using the following rules:
- * - printable characters are simply copied from the buffer at @src to the
- *   buffer at @p
- * - intervening streaks of non-printable characters in the buffer at @src
- *   are replaced with a single space in the buffer at @p
- * Note that we pay no attention to '\0'-termination.
- *
- * Pass @p == NULL and @remain == 0 for this special behavior -- In this
- * case, we simply return the number of bytes that WOULD HAVE been written
- * to a buffer at @p, had it been infinitely big.
- *
- * Return: the number of bytes written to @p (or WOULD HAVE been written to
- *         @p, as described in the previous paragraph)
- */
-static inline int
-vbuschannel_sanitize_buffer(char *p, int remain, char *src, int srcmax)
-{
-	int chars = 0;
-	int nonprintable_streak = 0;
-
-	while (srcmax > 0) {
-		if ((*src >= ' ') && (*src < 0x7f)) {
-			if (nonprintable_streak) {
-				if (remain > 0) {
-					*p = ' ';
-					p++;
-					remain--;
-					chars++;
-				} else if (!p) {
-					chars++;
-				}
-				nonprintable_streak = 0;
-			}
-			if (remain > 0) {
-				*p = *src;
-				p++;
-				remain--;
-				chars++;
-			} else if (!p) {
-				chars++;
-			}
-		} else {
-			nonprintable_streak = 1;
-		}
-		src++;
-		srcmax--;
-	}
-	return chars;
-}
-
-#define VBUSCHANNEL_ADDACHAR(ch, p, remain, chars) \
-	do {					   \
-		if (remain <= 0)		   \
-			break;			   \
-		*p = ch;			   \
-		p++;  chars++;  remain--;	   \
-	} while (0)
-
-/**
- * vbuschannel_itoa() - convert non-negative int to string
- * @p: destination string
- * @remain: max number of bytes that can be written to @p
- * @num: input int to convert
- *
- * Converts the non-negative value at @num to an ascii decimal string
- * at @p, writing at most @remain bytes.  Note there is NO '\0' termination
- * written to @p.
- *
- * Return: number of bytes written to @p
- *
- */
-static inline int
-vbuschannel_itoa(char *p, int remain, int num)
-{
-	int digits = 0;
-	char s[32];
-	int i;
-
-	if (num == 0) {
-		/* '0' is a special case */
-		if (remain <= 0)
-			return 0;
-		*p = '0';
-		return 1;
-	}
-	/* form a backwards decimal ascii string in <s> */
-	while (num > 0) {
-		if (digits >= (int)sizeof(s))
-			return 0;
-		s[digits++] = (num % 10) + '0';
-		num = num / 10;
-	}
-	if (remain < digits) {
-		/* not enough room left at <p> to hold number, so fill with
-		 * '?'
-		 */
-		for (i = 0; i < remain; i++, p++)
-			*p = '?';
-		return remain;
-	}
-	/* plug in the decimal ascii string representing the number, by */
-	/* reversing the string we just built in <s> */
-	i = digits;
-	while (i > 0) {
-		i--;
-		*p = s[i];
-		p++;
-	}
-	return digits;
-}
-
-/**
- * vbuschannel_devinfo_to_string() - format a struct ultra_vbus_deviceinfo
- *                                   to a printable string
- * @devinfo: the struct ultra_vbus_deviceinfo to format
- * @p: destination string area
- * @remain: size of destination string area in bytes
- * @devix: the device index to be included in the output data, or -1 if no
- *         device index is to be included
- *
- * Reads @devInfo, and converts its contents to a printable string at @p,
- * writing at most @remain bytes. Note there is NO '\0' termination
- * written to @p.
- *
- * Return: number of bytes written to @p
- */
-static inline int
-vbuschannel_devinfo_to_string(struct ultra_vbus_deviceinfo *devinfo,
-			      char *p, int remain, int devix)
-{
-	char *psrc;
-	int nsrc, x, i, pad;
-	int chars = 0;
-
-	psrc = &devinfo->devtype[0];
-	nsrc = sizeof(devinfo->devtype);
-	if (vbuschannel_sanitize_buffer(NULL, 0, psrc, nsrc) <= 0)
-		return 0;
-
-	/* emit device index */
-	if (devix >= 0) {
-		VBUSCHANNEL_ADDACHAR('[', p, remain, chars);
-		x = vbuschannel_itoa(p, remain, devix);
-		p += x;
-		remain -= x;
-		chars += x;
-		VBUSCHANNEL_ADDACHAR(']', p, remain, chars);
-	} else {
-		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-	}
-
-	/* emit device type */
-	x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
-	p += x;
-	remain -= x;
-	chars += x;
-	pad = 15 - x;		/* pad device type to be exactly 15 chars */
-	for (i = 0; i < pad; i++)
-		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-	VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-
-	/* emit driver name */
-	psrc = &devinfo->drvname[0];
-	nsrc = sizeof(devinfo->drvname);
-	x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
-	p += x;
-	remain -= x;
-	chars += x;
-	pad = 15 - x;		/* pad driver name to be exactly 15 chars */
-	for (i = 0; i < pad; i++)
-		VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-	VBUSCHANNEL_ADDACHAR(' ', p, remain, chars);
-
-	/* emit strings */
-	psrc = &devinfo->infostrs[0];
-	nsrc = sizeof(devinfo->infostrs);
-	x = vbuschannel_sanitize_buffer(p, remain, psrc, nsrc);
-	p += x;
-	remain -= x;
-	chars += x;
-	VBUSCHANNEL_ADDACHAR('\n', p, remain, chars);
-
-	return chars;
-}
-
-#endif

drivers/staging/unisys/visorbus/visorbus_private.h

@@ -20,7 +20,7 @@
 #include <linux/uuid.h>
 
 #include "controlvmchannel.h"
-#include "vbusdeviceinfo.h"
+#include "vbuschannel.h"
 
 /* TARGET_HOSTNAME specified as -DTARGET_HOSTNAME=\"thename\" on the
  * command line