kbuild: Fix "export-objs"

This patch cleans up most of the Makefile's to list the correct files
(i.e. the ones which do have "EXPORT_SYMBOL" in them) in $(export-objs)

Contributed by "Lightweight patch manager"

arch/i386/kernel/Makefile

@@ -6,7 +6,7 @@ EXTRA_TARGETS := kernel.o head.o init_task.o
 
 O_TARGET := kernel.o
 
-export-objs     := mca.o mtrr.o msr.o cpuid.o microcode.o i386_ksyms.o time.o
+export-objs     := mca.o mtrr.o i386_ksyms.o time.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_i386.o \

arch/ia64/lib/Makefile

@@ -4,7 +4,7 @@
 
 L_TARGET = lib.a
 
-export-objs := io.o swiotlb.o
+export-objs := swiotlb.o
 
 obj-y := __divsi3.o __udivsi3.o __modsi3.o __umodsi3.o					\
 	__divdi3.o __udivdi3.o __moddi3.o __umoddi3.o					\

arch/ia64/sn/io/Makefile

@@ -18,7 +18,7 @@ EXTRA_CFLAGS    := -DLITTLE_ENDIAN
 O_TARGET := sgiio.o
 
 ifeq ($(CONFIG_MODULES),y)
-export-objs = pciio.o hcl.o pci_dma.o
+export-objs = pciio.o hcl.o
 endif
 
 obj-y  := stubs.o sgi_if.o pciio.o xtalk.o xbow.o xswitch.o klgraph_hack.o \

arch/mips/baget/Makefile

@@ -5,7 +5,7 @@
 
 O_TARGET := baget.a
 
-export-objs		:= vacserial.o vacrtc.o
+export-objs		:= vacserial.o
 obj-y			:= baget.o print.o setup.o time.o irq.o bagetIRQ.o \
 			   reset.o wbflush.o
 obj-$(CONFIG_SERIAL)	+= vacserial.o

arch/mips/kernel/Makefile

@@ -6,6 +6,7 @@
 
 O_TARGET	:= kernel.o
 EXTRA_TARGETS	:= head.o init_task.o
+export-objs	:= mips_ksyms.o
 
 obj-y				+= branch.o process.o signal.o entry.o \
 				   traps.o ptrace.o vm86.o ioport.o reset.o \
@@ -27,14 +28,12 @@ endif
 obj-$(CONFIG_SMP)		+= smp.o
 
 # Old style irq support, going to die in 2.5.
-export-objs			+= old-irq.o
 obj-$(CONFIG_NEW_IRQ)		+= irq.o
 obj-$(CONFIG_ROTTEN_IRQ)	+= old-irq.o
 obj-$(CONFIG_I8259)		+= i8259.o
 
 # transition from old time.c to new time.c
 # some boards uses old-time.c, some use time.c, and some use their own ones
-export-objs			+= old-time.o time.o
 obj-$(CONFIG_OLD_TIME_C)	+= old-time.o
 obj-$(CONFIG_NEW_TIME_C)	+= time.o
 

arch/ppc/8xx_io/Makefile

@@ -11,6 +11,8 @@
 
 O_TARGET 		:= 8xx_io.o
 
+export-objs		:= fec.o
+
 obj-y			:= commproc.o uart.o
 
 obj-$(CONFIG_FEC_ENET)	+= fec.o

arch/ppc64/kernel/Makefile

@@ -9,7 +9,7 @@ KHEAD := head.o
 O_TARGET	:= kernel.o
 EXTRA_TARGETS	:= $(KHEAD)
 
-export-objs         := ppc_ksyms.o setup.o
+export-objs         := ppc_ksyms.o
 
 obj-y               :=	ppc_ksyms.o setup.o entry.o traps.o irq.o idle.o \
 			time.o process.o signal.o syscalls.o misc.o ptrace.o \

arch/sh/kernel/Makefile

@@ -5,7 +5,8 @@
 O_TARGET	:= kernel.o
 EXTRA_TARGETS	:= head.o init_task.o
 
-export-objs	:= io.o io_generic.o io_hd64461.o setup_hd64461.o sh_ksyms.o
+export-objs	:= io.o io_generic.o io_hd64465.o setup_hd64465.o sh_ksyms.o \
+		   io_adx.o io_bigsur.o io_cat68701.o hd64465_gpio.o
 
 obj-y	:= process.o signal.o entry.o traps.o irq.o irq_ipr.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \

arch/x86_64/kernel/Makefile

@@ -5,7 +5,7 @@
 O_TARGET	:= kernel.o
 EXTRA_TARGETS 	:= head.o head64.o init_task.o
 
-export-objs     := mtrr.o msr.o cpuid.o x8664_ksyms.o
+export-objs     := mtrr.o x8664_ksyms.o
 
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o i8259.o ioport.o ldt.o setup.o time.o sys_x86_64.o \

drivers/acorn/char/Makefile

@@ -3,8 +3,6 @@
 #
 
 # All the objects that export symbols.
-export-objs	:= mouse_rpc.o
-
 obj-arc		:= keyb_arc.o
 obj-rpc		:= keyb_ps2.o
 obj-clps7500	:= keyb_ps2.o defkeymap-acorn.o

drivers/block/Makefile

@@ -8,7 +8,8 @@
 # In the future, some of these should be built conditionally.
 #
 
-export-objs	:= elevator.o ll_rw_blk.o blkpg.o loop.o DAC960.o genhd.o block_ioctl.o
+export-objs	:= elevator.o ll_rw_blk.o blkpg.o loop.o genhd.o \
+		   block_ioctl.o acsi.o
 
 obj-y	:= elevator.o ll_rw_blk.o blkpg.o genhd.o block_ioctl.o
 

drivers/macintosh/Makefile

@@ -4,7 +4,7 @@
 
 # Objects that export symbols.
 
-export-objs	:= adb.o rtc.o mac_hid.o via-pmu.o
+export-objs	:= adb.o mac_hid.o via-pmu.o
 
 # Object file lists.
 

drivers/message/fusion/Makefile

@@ -43,7 +43,7 @@ EXTRA_CFLAGS += -I. ${MPT_CFLAGS}
 
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
-export-objs	:= mptbase.o mptscsih.o mptlan.o mptctl.o isense.o
+export-objs	:= mptbase.o
 
 obj-$(CONFIG_FUSION)		+= mptbase.o mptscsih.o
 obj-$(CONFIG_FUSION_ISENSE)	+= isense.o

drivers/net/wan/Makefile

@@ -6,7 +6,7 @@
 #
 
 export-objs :=	z85230.o syncppp.o comx.o sdladrv.o cycx_drv.o hdlc_generic.o \
-		dlci.o pc300_drv.o
+		dlci.o
 
 wanpipe-y			:= sdlamain.o sdla_ft1.o
 wanpipe-$(CONFIG_WANPIPE_X25)	+= sdla_x25.o

drivers/pcmcia/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the kernel pcmcia subsystem (c/o David Hinds)
 #
 
-export-objs := ds.o cs.o yenta.o pci_socket.o
+export-objs := ds.o cs.o yenta.o
 
 obj-$(CONFIG_PCMCIA)			+= pcmcia_core.o ds.o
 ifeq ($(CONFIG_CARDBUS),y)

drivers/s390/cio/Makefile

@@ -8,6 +8,6 @@ obj-y += airq.o blacklist.o cio.o ioinfo.o misc.o requestirq.o s390io.o
 obj-$(CONFIG_CHSC) += chsc.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
-export-objs += airq.o cio.o ioinfo.o misc.o requestirq.o s390io.o
+export-objs += airq.o cio.o ioinfo.o requestirq.o s390io.o
 
 include $(TOPDIR)/Rules.make

drivers/sgi/char/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-export-objs	:= newport.o shmiq.o sgicons.o usema.o
+export-objs	:= newport.o shmiq.o sgicons.o usema.o rrm.o
 obj-y		:= newport.o shmiq.o sgicons.o usema.o streamable.o
 
 obj-$(CONFIG_SGI_SERIAL)	+= sgiserial.o

drivers/usb/core/Makefile

@@ -2,7 +2,7 @@
 # Makefile for USB Core files and filesystem
 #
 
-export-objs	:= usb.o hcd.o hcd-pci.o urb.o message.o config.o file.o
+export-objs	:= usb.o hcd.o hcd-pci.o urb.o message.o file.o
 
 usbcore-objs	:= usb.o usb-debug.o hub.o hcd.o urb.o message.o \
 			config.o file.o

drivers/usb/host/Makefile

@@ -3,8 +3,6 @@
 # framework and drivers
 #
 
-export-objs := usb-ohci.o
-
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD_ALT)	+= uhci-hcd.o

drivers/video/aty/Makefile

-
-export-objs    :=  atyfb_base.o mach64_accel.o
-
 obj-$(CONFIG_FB_ATY) += atyfb.o
 
 atyfb-y				:= atyfb_base.o mach64_accel.o ../cfbimgblt.o

fs/Makefile

@@ -7,8 +7,7 @@
 
 O_TARGET := fs.o
 
-export-objs :=	filesystems.o open.o dcache.o buffer.o bio.o inode.o dquot.o \
-		mpage.o
+export-objs :=	open.o dcache.o buffer.o bio.o inode.o dquot.o mpage.o
 
 obj-y :=	open.o read_write.o devices.o file_table.o buffer.o \
 		bio.o super.o block_dev.o char_dev.o stat.o exec.o pipe.o \

net/core/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Linux networking core.
 #
 
-export-objs := ext8022.o netfilter.o profile.o
+export-objs := ext8022.o
 
 obj-y := sock.o skbuff.o iovec.o datagram.o scm.o
 

net/ipv4/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux TCP/IP (INET) layer.
 #
 
-export-objs = ipip.o ip_gre.o
-
 obj-y     := utils.o route.o inetpeer.o proc.o protocol.o \
 	     ip_input.o ip_fragment.o ip_forward.o ip_options.o \
 	     ip_output.o ip_sockglue.o \

net/ipx/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Linux IPX layer.
 #
 
-export-objs = af_ipx.o af_spx.o
+export-objs = af_ipx.o
 
 obj-$(CONFIG_IPX) += ipx.o
 

net/netlink/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the netlink driver.
 #
 
-export-objs := af_netlink.o
-
 obj-y  				:= af_netlink.o
 obj-$(CONFIG_NETLINK_DEV)	+= netlink_dev.o
 

sound/core/Makefile

@@ -3,7 +3,7 @@
 # Copyright (c) 1999,2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := sound.o pcm.o pcm_lib.o rawmidi.o timer.o rtctimer.o hwdep.o
+export-objs  := sound.o pcm.o pcm_lib.o rawmidi.o timer.o hwdep.o
 
 snd-objs     := sound.o init.o isadma.o memory.o info.o control.o misc.o \
                 device.o wrappers.o

sound/core/seq/Makefile

@@ -8,7 +8,7 @@ ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
   obj-$(CONFIG_SND_SEQUENCER) += oss/
 endif
 
-export-objs  := seq_device.o seq.o seq_ports.o seq_instr.o seq_midi_emul.o \
+export-objs  := seq_device.o seq.o seq_instr.o seq_midi_emul.o \
 		seq_midi_event.o seq_virmidi.o
 
 snd-seq-device-objs := seq_device.o

sound/isa/sb/Makefile

@@ -3,7 +3,7 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-export-objs  := emu8000.o emu8000_synth.o sb_common.o sb8_main.o sb16_main.o sb16_csp.o
+export-objs  := emu8000.o sb_common.o sb8_main.o sb16_main.o sb16_csp.o
 
 snd-sb-common-objs := sb_common.o sb_mixer.o
 snd-sb8-dsp-objs := sb8_main.o sb8_midi.o

sound/oss/Makefile

@@ -6,10 +6,9 @@
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
-export-objs	:=  ad1848.o audio_syms.o midi_syms.o mpu401.o \
-		    msnd.o opl3.o sb_common.o sequencer_syms.o \
-		    sound_syms.o uart401.o	\
-		    nm256_audio.o ac97.o ac97_codec.o aci.o
+export-objs	:=  ad1848.o audio_syms.o midi_syms.o mpu401.o ac97_codec.o \
+		    msnd.o opl3.o sb_common.o sequencer_syms.o ac97.o aci.o \
+		    sound_syms.o uart401.o
 
 # Each configuration option enables a list of files.