Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Michael Turquette:
 "Very late clk regression fixes for the ARM-based AT91 platform.

  These went unnoticed by me until recently, hence the late pull
  request"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: at91: fix h32mx prototype inclusion in pmc header
  clk: at91: trivial: typo in peripheral clock description
  clk: at91: fix PERIPHERAL_MAX_SHIFT definition
  clk: at91: pll: fix input range validity check

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -248,7 +248,7 @@ Required properties for peripheral clocks:
 - #address-cells : shall be 1 (reg is used to encode clk id).
 - clocks : shall be the master clock phandle.
 	e.g. clocks = <&mck>;
-- name: device tree node describing a specific system clock.
+- name: device tree node describing a specific peripheral clock.
 	* #clock-cells : from common clock binding; shall be set to 0.
 	* reg: peripheral id. See Atmel's datasheets to get a full
 	  list of peripheral ids.

drivers/clk/at91/clk-peripheral.c

@@ -29,7 +29,7 @@
 #define PERIPHERAL_RSHIFT_MASK	0x3
 #define PERIPHERAL_RSHIFT(val)	(((val) >> 16) & PERIPHERAL_RSHIFT_MASK)
 
-#define PERIPHERAL_MAX_SHIFT	4
+#define PERIPHERAL_MAX_SHIFT	3
 
 struct clk_peripheral {
 	struct clk_hw hw;
@@ -242,7 +242,7 @@ static long clk_sam9x5_peripheral_round_rate(struct clk_hw *hw,
 		return *parent_rate;
 
 	if (periph->range.max) {
-		for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+		for (; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
 			cur_rate = *parent_rate >> shift;
 			if (cur_rate <= periph->range.max)
 				break;
@@ -254,7 +254,7 @@ static long clk_sam9x5_peripheral_round_rate(struct clk_hw *hw,
 
 	best_diff = cur_rate - rate;
 	best_rate = cur_rate;
-	for (; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+	for (; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
 		cur_rate = *parent_rate >> shift;
 		if (cur_rate < rate)
 			cur_diff = rate - cur_rate;
@@ -289,7 +289,7 @@ static int clk_sam9x5_peripheral_set_rate(struct clk_hw *hw,
 	if (periph->range.max && rate > periph->range.max)
 		return -EINVAL;
 
-	for (shift = 0; shift < PERIPHERAL_MAX_SHIFT; shift++) {
+	for (shift = 0; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
 		if (parent_rate >> shift == rate) {
 			periph->auto_div = false;
 			periph->div = shift;

drivers/clk/at91/clk-pll.c

@@ -173,8 +173,7 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
 	int i = 0;
 
 	/* Check if parent_rate is a valid input rate */
-	if (parent_rate < characteristics->input.min ||
-	    parent_rate > characteristics->input.max)
+	if (parent_rate < characteristics->input.min)
 		return -ERANGE;
 
 	/*
@@ -187,6 +186,15 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
 	if (!mindiv)
 		mindiv = 1;
 
+	if (parent_rate > characteristics->input.max) {
+		tmpdiv = DIV_ROUND_UP(parent_rate, characteristics->input.max);
+		if (tmpdiv > PLL_DIV_MAX)
+			return -ERANGE;
+
+		if (tmpdiv > mindiv)
+			mindiv = tmpdiv;
+	}
+
 	/*
 	 * Calculate the maximum divider which is limited by PLL register
 	 * layout (limited by the MUL or DIV field size).

drivers/clk/at91/pmc.h

@@ -121,7 +121,7 @@ extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
 					       struct at91_pmc *pmc);
 #endif
 
-#if defined(CONFIG_HAVE_AT91_SMD)
+#if defined(CONFIG_HAVE_AT91_H32MX)
 extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
 					      struct at91_pmc *pmc);
 #endif