ARM: dts: sun5i: Remove underscores from nodes names

Some GPIO pinctrl nodes cannot be easily removed, because they would also
change the pin configuration, for example to add a pull resistor or change
the current delivered by the pin.

Those nodes still have underscores and unit-addresses in their node names
in our DTs, so adjust their name to remove the warnings. Use that occasion
to also fix some poorly chosen node-names.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>

arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts

@@ -106,7 +106,7 @@ &otg_sram {
 };
 
 &pio {
-	led_pins_t003: led_pins@0 {
+	led_pins_t003: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;

arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts

@@ -125,13 +125,13 @@ &otg_sram {
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG12";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	led_pins_t004: led_pins@0 {
+	led_pins_t004: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

@@ -223,13 +223,13 @@ &otg_sram {
 };
 
 &pio {
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PE3";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG12";
 		function = "gpio_in";
 		bias-pull-up;

arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts

@@ -98,7 +98,7 @@ &ohci0 {
 };
 
 &pio {
-	led_pins_r7: led_pins@0 {
+	led_pins_r7: led-pin {
 		pins = "PB2";
 		function = "gpio_out";
 		drive-strength = <20>;

arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts

@@ -134,13 +134,13 @@ &otg_sram {
 };
 
 &pio {
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PG1";
 		function = "gpio_in";
 		bias-pull-down;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG2";
 		function = "gpio_in";
 		bias-pull-up;

arch/arm/boot/dts/sun5i-a13-hsg-h702.dts

@@ -133,7 +133,7 @@ &otg_sram {
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG2";
 		function = "gpio_in";
 		bias-pull-up;

arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts

@@ -112,19 +112,19 @@ &otg_sram {
 };
 
 &pio {
-	led_pins_olinuxinom: led_pins@0 {
+	led_pins_olinuxinom: led-pin {
 		pins = "PG9";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG2";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PG1";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun5i-a13-olinuxino.dts

@@ -207,19 +207,19 @@ &otg_sram {
 };
 
 &pio {
-	led_pins_olinuxino: led_pins@0 {
+	led_pins_olinuxino: led-pin {
 		pins = "PG9";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG2";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PG1";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun5i-a13-utoo-p66.dts

@@ -58,7 +58,7 @@ chosen {
 		/delete-property/stdout-path;
 	};
 
-	i2c_lcd: i2c@0 {
+	i2c_lcd: i2c-gpio {
 		/* The lcd panel i2c interface is hooked up via gpios */
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
@@ -95,7 +95,7 @@ mmccard: mmccard@0 {
 };
 
 &pio {
-	i2c_lcd_pins: i2c_lcd_pin@0 {
+	i2c_lcd_pins: i2c-lcd-pin {
 		pins = "PG10", "PG12";
 		function = "gpio_out";
 		bias-pull-up;

arch/arm/boot/dts/sun5i-r8-chip.dts

@@ -182,8 +182,7 @@ &otg_sram {
 };
 
 &pio {
-
-	chip_w1_pin: chip_w1_pin@0 {
+	chip_w1_pin: chip-w1-pin {
 		pins = "PD2";
 		function = "gpio_in";
 	        bias-pull-up;

arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi

@@ -137,13 +137,13 @@ &otg_sram {
 };
 
 &pio {
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PG1";
 		function = "gpio_in";
 		bias-pull-down;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PG2";
 		function = "gpio_in";
 		bias-pull-up;