Commit bc2a3a6c authored by Mariusz Stachura's avatar Mariusz Stachura Committed by Jeff Kirsher

i40e: fix for wrong partition id calculation on OCP mezz cards

This patch overwrites number of ports for X722 devices with support
for OCP PHY mezzanine.
The old method with checking if port is disabled in the PRTGEN_CNF
register cannot be used in this case. When the OCP is removed, ports
were seen as disabled, which resulted in wrong calculation of partition
id, that caused WoL to be disabled on certain ports.
Signed-off-by: default avatarMariusz Stachura <mariusz.stachura@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 01c96952
......@@ -3200,9 +3200,10 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff,
u32 valid_functions, num_functions;
u32 number, logical_id, phys_id;
struct i40e_hw_capabilities *p;
u16 id, ocp_cfg_word0;
i40e_status status;
u8 major_rev;
u32 i = 0;
u16 id;
cap = (struct i40e_aqc_list_capabilities_element_resp *) buff;
......@@ -3389,6 +3390,26 @@ static void i40e_parse_discover_capabilities(struct i40e_hw *hw, void *buff,
hw->num_ports++;
}
/* OCP cards case: if a mezz is removed the Ethernet port is at
* disabled state in PRTGEN_CNF register. Additional NVM read is
* needed in order to check if we are dealing with OCP card.
* Those cards have 4 PFs at minimum, so using PRTGEN_CNF for counting
* physical ports results in wrong partition id calculation and thus
* not supporting WoL.
*/
if (hw->mac.type == I40E_MAC_X722) {
if (!i40e_acquire_nvm(hw, I40E_RESOURCE_READ)) {
status = i40e_aq_read_nvm(hw, I40E_SR_EMP_MODULE_PTR,
2 * I40E_SR_OCP_CFG_WORD0,
sizeof(ocp_cfg_word0),
&ocp_cfg_word0, true, NULL);
if (!status &&
(ocp_cfg_word0 & I40E_SR_OCP_ENABLED))
hw->num_ports = 4;
i40e_release_nvm(hw);
}
}
valid_functions = p->valid_functions;
num_functions = 0;
while (valid_functions) {
......
......@@ -1336,6 +1336,9 @@ struct i40e_hw_port_stats {
#define I40E_SR_PCIE_ALT_MODULE_MAX_SIZE 1024
#define I40E_SR_CONTROL_WORD_1_SHIFT 0x06
#define I40E_SR_CONTROL_WORD_1_MASK (0x03 << I40E_SR_CONTROL_WORD_1_SHIFT)
#define I40E_PTR_TYPE BIT(15)
#define I40E_SR_OCP_CFG_WORD0 0x2B
#define I40E_SR_OCP_ENABLED BIT(15)
/* Shadow RAM related */
#define I40E_SR_SECTOR_SIZE_IN_WORDS 0x800
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment