crypto: atmel - add Atmel AES driver

Signed-off-by: Nicolas Royer <nicolas@eukrea.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Eric Bénard <eric@eukrea.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/Kconfig

@@ -332,4 +332,21 @@ config CRYPTO_DEV_BFIN_CRC
 	  Newer Blackfin processors have CRC hardware. Select this if you
 	  want to use the Blackfin CRC module.
 
+config CRYPTO_DEV_ATMEL_AES
+	tristate "Support for Atmel AES hw accelerator"
+	depends on ARCH_AT91
+	select CRYPTO_CBC
+	select CRYPTO_ECB
+	select CRYPTO_AES
+	select CRYPTO_ALGAPI
+	select CRYPTO_BLKCIPHER
+	select CONFIG_AT_HDMAC
+	help
+	  Some Atmel processors have AES hw accelerator.
+	  Select this if you want to use the Atmel module for
+	  AES algorithms.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called atmel-aes.
+
 endif # CRYPTO_HW

drivers/crypto/Makefile

@@ -17,3 +17,4 @@ obj-$(CONFIG_CRYPTO_DEV_TEGRA_AES) += tegra-aes.o
 obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
 obj-$(CONFIG_CRYPTO_DEV_BFIN_CRC) += bfin_crc.o
 obj-$(CONFIG_CRYPTO_DEV_NX) += nx/
+obj-$(CONFIG_CRYPTO_DEV_ATMEL_AES) += atmel-aes.o

drivers/crypto/atmel-aes-regs.h

+#ifndef __ATMEL_AES_REGS_H__
+#define __ATMEL_AES_REGS_H__
+
+#define AES_CR			0x00
+#define AES_CR_START		(1 << 0)
+#define AES_CR_SWRST		(1 << 8)
+#define AES_CR_LOADSEED		(1 << 16)
+
+#define	AES_MR			0x04
+#define AES_MR_CYPHER_DEC		(0 << 0)
+#define AES_MR_CYPHER_ENC		(1 << 0)
+#define	AES_MR_DUALBUFF			(1 << 3)
+#define AES_MR_PROCDLY_MASK		(0xF << 4)
+#define AES_MR_PROCDLY_OFFSET	4
+#define AES_MR_SMOD_MASK		(0x3 << 8)
+#define AES_MR_SMOD_MANUAL		(0x0 << 8)
+#define AES_MR_SMOD_AUTO		(0x1 << 8)
+#define AES_MR_SMOD_IDATAR0		(0x2 << 8)
+#define	AES_MR_KEYSIZE_MASK		(0x3 << 10)
+#define	AES_MR_KEYSIZE_128		(0x0 << 10)
+#define	AES_MR_KEYSIZE_192		(0x1 << 10)
+#define	AES_MR_KEYSIZE_256		(0x2 << 10)
+#define AES_MR_OPMOD_MASK		(0x7 << 12)
+#define AES_MR_OPMOD_ECB		(0x0 << 12)
+#define AES_MR_OPMOD_CBC		(0x1 << 12)
+#define AES_MR_OPMOD_OFB		(0x2 << 12)
+#define AES_MR_OPMOD_CFB		(0x3 << 12)
+#define AES_MR_OPMOD_CTR		(0x4 << 12)
+#define AES_MR_LOD				(0x1 << 15)
+#define AES_MR_CFBS_MASK		(0x7 << 16)
+#define AES_MR_CFBS_128b		(0x0 << 16)
+#define AES_MR_CFBS_64b			(0x1 << 16)
+#define AES_MR_CFBS_32b			(0x2 << 16)
+#define AES_MR_CFBS_16b			(0x3 << 16)
+#define AES_MR_CFBS_8b			(0x4 << 16)
+#define AES_MR_CKEY_MASK		(0xF << 20)
+#define AES_MR_CKEY_OFFSET		20
+#define AES_MR_CMTYP_MASK		(0x1F << 24)
+#define AES_MR_CMTYP_OFFSET		24
+
+#define	AES_IER		0x10
+#define	AES_IDR		0x14
+#define	AES_IMR		0x18
+#define	AES_ISR		0x1C
+#define AES_INT_DATARDY		(1 << 0)
+#define AES_INT_URAD		(1 << 8)
+#define AES_ISR_URAT_MASK	(0xF << 12)
+#define AES_ISR_URAT_IDR_WR_PROC	(0x0 << 12)
+#define AES_ISR_URAT_ODR_RD_PROC	(0x1 << 12)
+#define AES_ISR_URAT_MR_WR_PROC		(0x2 << 12)
+#define AES_ISR_URAT_ODR_RD_SUBK	(0x3 << 12)
+#define AES_ISR_URAT_MR_WR_SUBK		(0x4 << 12)
+#define AES_ISR_URAT_WOR_RD			(0x5 << 12)
+
+#define AES_KEYWR(x)	(0x20 + ((x) * 0x04))
+#define AES_IDATAR(x)	(0x40 + ((x) * 0x04))
+#define AES_ODATAR(x)	(0x50 + ((x) * 0x04))
+#define AES_IVR(x)		(0x60 + ((x) * 0x04))
+
+#define AES_HW_VERSION	0xFC
+
+#endif /* __ATMEL_AES_REGS_H__ */