misc: at24: replace memory_accessor with nvmem_device_read

Now that the AT24 uses the NVMEM framework, replace the
memory_accessor in the setup() callback with nvmem API calls.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/mach-davinci/board-mityomapl138.c

@@ -115,13 +115,14 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct memory_accessor *a, void *context)
+static void read_factory_config(struct nvmem_device *nvmem, void *context)
 {
 	int ret;
 	const char *partnum = NULL;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
-	ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
+	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
+				&factory_config);
 	if (ret != sizeof(struct factory_config)) {
 		pr_warn("Read Factory Config Failed: %d\n", ret);
 		goto bad_config;

arch/arm/mach-davinci/common.c

@@ -28,13 +28,13 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
 {
 	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
 	off_t offset = (off_t)context;
 
 	/* Read MAC addr from EEPROM */
-	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
 }
 

drivers/misc/eeprom/at24.c

@@ -56,7 +56,6 @@
 
 struct at24_data {
 	struct at24_platform_data chip;
-	struct memory_accessor macc;
 	int use_smbus;
 	int use_smbus_write;
 
@@ -409,30 +408,6 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
 
 /*-------------------------------------------------------------------------*/
 
-/*
- * This lets other kernel code access the eeprom data. For example, it
- * might hold a board's Ethernet address, or board-specific calibration
- * data generated on the manufacturing floor.
- */
-
-static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf,
-			 off_t offset, size_t count)
-{
-	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-
-	return at24_read(at24, buf, offset, count);
-}
-
-static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
-			  off_t offset, size_t count)
-{
-	struct at24_data *at24 = container_of(macc, struct at24_data, macc);
-
-	return at24_write(at24, buf, offset, count);
-}
-
-/*-------------------------------------------------------------------------*/
-
 /*
  * Provide a regmap interface, which is registered with the NVMEM
  * framework
@@ -600,16 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	at24->chip = chip;
 	at24->num_addresses = num_addresses;
 
-	at24->macc.read = at24_macc_read;
-
 	writable = !(chip.flags & AT24_FLAG_READONLY);
 	if (writable) {
 		if (!use_smbus || use_smbus_write) {
 
 			unsigned write_max = chip.page_size;
 
-			at24->macc.write = at24_macc_write;
-
 			if (write_max > io_limit)
 				write_max = io_limit;
 			if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX)
@@ -683,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	/* export data to kernel code */
 	if (chip.setup)
-		chip.setup(&at24->macc, chip.context);
+		chip.setup(at24->nvmem, chip.context);
 
 	return 0;
 

include/linux/davinci_emac.h

@@ -12,7 +12,7 @@
 #define _LINUX_DAVINCI_EMAC_H
 
 #include <linux/if_ether.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>
 
 struct mdio_platform_data {
 	unsigned long		bus_freq;
@@ -46,5 +46,5 @@ enum {
 	EMAC_VERSION_2,	/* DM646x */
 };
 
-void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
 #endif

include/linux/memory.h

@@ -136,17 +136,6 @@ extern struct memory_block *find_memory_block(struct mem_section *);
 #define unregister_hotmemory_notifier(nb)  ({ (void)(nb); })
 #endif
 
-/*
- * 'struct memory_accessor' is a generic interface to provide
- * in-kernel access to persistent memory such as i2c or SPI EEPROMs
- */
-struct memory_accessor {
-	ssize_t (*read)(struct memory_accessor *, char *buf, off_t offset,
-			size_t count);
-	ssize_t (*write)(struct memory_accessor *, const char *buf,
-			 off_t offset, size_t count);
-};
-
 /*
  * Kernel text modification mutex, used for code patching. Users of this lock
  * can sleep.

include/linux/platform_data/at24.h

@@ -9,7 +9,7 @@
 #define _LINUX_AT24_H
 
 #include <linux/types.h>
-#include <linux/memory.h>
+#include <linux/nvmem-consumer.h>
 
 /**
  * struct at24_platform_data - data to set up at24 (generic eeprom) driver
@@ -17,7 +17,7 @@
  * @page_size: number of byte which can be written in one go
  * @flags: tunable options, check AT24_FLAG_* defines
  * @setup: an optional callback invoked after eeprom is probed; enables kernel
-	code to access eeprom via memory_accessor, see example
+	code to access eeprom via nvmem, see example
  * @context: optional parameter passed to setup()
  *
  * If you set up a custom eeprom type, please double-check the parameters.
@@ -26,13 +26,13 @@
  *
  * An example in pseudo code for a setup() callback:
  *
- * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
+ * void get_mac_addr(struct mvmem_device *nvmem, void *context)
  * {
  *	u8 *mac_addr = ethernet_pdata->mac_addr;
  *	off_t offset = context;
  *
  *	// Read MAC addr from EEPROM
- *	if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ *	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
  *		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
  * }
  *
@@ -48,7 +48,7 @@ struct at24_platform_data {
 #define AT24_FLAG_IRUGO		0x20	/* sysfs-entry will be world-readable */
 #define AT24_FLAG_TAKE8ADDR	0x10	/* take always 8 addresses (24c00) */
 
-	void		(*setup)(struct memory_accessor *, void *context);
+	void		(*setup)(struct nvmem_device *nvmem, void *context);
 	void		*context;
 };