arm64: dts: qcom: sc7180: Update Q6V5 MSS node

Add TCSR node and update MSS node to support MSA based Modem boot on
SC7180 SoCs.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200421143228.8981-8-sibis@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/sc7180-idp.dts

@@ -309,6 +309,13 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7180-mss-pil";
+	iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>;
+	memory-region = <&mba_mem &mpss_mem>;
+};
+
 &sdhc_1 {
 	status = "okay";
 

arch/arm64/boot/dts/qcom/sc7180.dtsi

@@ -1011,6 +1011,11 @@ tcsr_mutex_regs: syscon@1f40000 {
 			reg = <0 0x01f40000 0 0x40000>;
 		};
 
+		tcsr_regs: syscon@1fc0000 {
+			compatible = "syscon";
+			reg = <0 0x01fc0000 0 0x40000>;
+		};
+
 		tlmm: pinctrl@3500000 {
 			compatible = "qcom,sc7180-pinctrl";
 			reg = <0 0x03500000 0 0x300000>,
@@ -1889,7 +1894,8 @@ apss_merge_funnel_in: endpoint {
 
 		remoteproc_mpss: remoteproc@4080000 {
 			compatible = "qcom,sc7180-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>;
+			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
 
 			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
 					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
@@ -1900,19 +1906,33 @@ remoteproc_mpss: remoteproc@4080000 {
 			interrupt-names = "wdog", "fatal", "ready", "handover",
 					  "stop-ack", "shutdown-ack";
 
-			clocks = <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "xo";
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_NAV_AXI_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "nav", "snoc_axi",
+				      "mnoc_axi", "xo";
 
 			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
 					<&rpmhpd SC7180_CX>,
+					<&rpmhpd SC7180_MX>,
 					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mss";
+			power-domain-names = "load_state", "cx", "mx", "mss";
 
 			memory-region = <&mpss_mem>;
 
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
 			status = "disabled";
 
 			glink-edge {