Commit bf732c6b authored by NeilBrown's avatar NeilBrown Committed by Greg Kroah-Hartman

staging: mt7621-spi: revised half-duplex message handling

The mt7621 SPI engine has a 32 byte buffer and the driver
currently only allows 32-byte read requests and 36 bytes writes
(there is a 4byte op/addr buffer).

This is an unnecessary limitation.  As the SPI clock is controlled
by the host it is quite acceptable to send a larger message in
multiple smaller transactions.  As long as Chip Select is kept asserted
the whole time, the SPI engine can be run multiple times for
a single SPI message.

This patch factors out the transaction logic and calls for each
transfer in the message.  A write transfer might leave bytes in the
buffer to be combined with a following read transfer, as this is
a common pattern.

With this in place, we can remove the current max_transfer_size limit.

In testing, this increases the read throughput for a NOR flash chip
from 1.4MB/s to 2.3MB/s, a 50% improvement.
Signed-off-by: default avatarNeilBrown <neil@brown.name>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a83834c1
......@@ -65,6 +65,7 @@ struct mt7621_spi {
unsigned int sys_freq;
unsigned int speed;
struct clk *clk;
int pending_write;
struct mt7621_spi_ops *ops;
};
......@@ -96,6 +97,7 @@ static void mt7621_spi_reset(struct mt7621_spi *rs, int duplex)
master &= ~(1 << 10);
mt7621_spi_write(rs, MT7621_SPI_MASTER, master);
rs->pending_write = 0;
}
static void mt7621_spi_set_cs(struct spi_device *spi, int enable)
......@@ -173,90 +175,124 @@ static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
return -ETIMEDOUT;
}
static int mt7621_spi_transfer_half_duplex(struct spi_master *master,
struct spi_message *m)
static void mt7621_spi_read_half_duplex(struct mt7621_spi *rs,
int rx_len, u8 *buf)
{
struct mt7621_spi *rs = spi_master_get_devdata(master);
struct spi_device *spi = m->spi;
unsigned int speed = spi->max_speed_hz;
struct spi_transfer *t = NULL;
int status = 0;
int i, len = 0;
int rx_len = 0;
u32 data[9] = { 0 };
u32 val;
/* Combine with any pending write, and perform one or
* more half-duplex transactions reading 'len' bytes.
* Data to be written is already in MT7621_SPI_DATA*
*/
int tx_len = rs->pending_write;
mt7621_spi_wait_till_ready(rs);
rs->pending_write = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
const u8 *buf = t->tx_buf;
while (rx_len || tx_len) {
int i;
u32 val = (min(tx_len, 4) * 8) << 24;
int rx = min(rx_len, 32);
if (t->rx_buf)
rx_len += t->len;
if (tx_len > 4)
val |= (tx_len - 4) * 8;
val |= (rx * 8) << 12;
mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
if (!buf)
continue;
tx_len = 0;
if (t->speed_hz < speed)
speed = t->speed_hz;
val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
val |= SPI_CTL_START;
mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
if (WARN_ON(len + t->len > 36)) {
status = -EIO;
goto msg_done;
}
mt7621_spi_wait_till_ready(rs);
for (i = 0; i < t->len; i++, len++)
data[len / 4] |= buf[i] << (8 * (len & 3));
for (i = 0; i < rx; i++) {
if ((i % 4) == 0)
val = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
*buf++ = val & 0xff;
val >>= 8;
}
rx_len -= i;
}
}
if (WARN_ON(rx_len > 32)) {
status = -EIO;
goto msg_done;
}
static inline void mt7621_spi_flush(struct mt7621_spi *rs)
{
mt7621_spi_read_half_duplex(rs, 0, NULL);
}
if (mt7621_spi_prepare(spi, speed)) {
status = -EIO;
goto msg_done;
static void mt7621_spi_write_half_duplex(struct mt7621_spi *rs,
int tx_len, const u8 *buf)
{
int val = 0;
int len = rs->pending_write;
if (len & 3) {
val = mt7621_spi_read(rs, MT7621_SPI_OPCODE + (len & ~3));
if (len < 4) {
val <<= (4 - len) * 8;
val = swab32(val);
}
}
data[0] = swab32(data[0]);
if (len < 4)
data[0] >>= (4 - len) * 8;
for (i = 0; i < len; i += 4)
mt7621_spi_write(rs, MT7621_SPI_OPCODE + i, data[i / 4]);
val = (min_t(int, len, 4) * 8) << 24;
if (len > 4)
val |= (len - 4) * 8;
val |= (rx_len * 8) << 12;
mt7621_spi_write(rs, MT7621_SPI_MOREBUF, val);
while (tx_len > 0) {
if (len >= 36) {
rs->pending_write = len;
mt7621_spi_flush(rs);
len = 0;
}
mt7621_spi_set_cs(spi, 1);
val |= *buf++ << (8 * (len & 3));
len++;
if ((len & 3) == 0) {
if (len == 4)
/* The byte-order of the opcode is weird! */
val = swab32(val);
mt7621_spi_write(rs, MT7621_SPI_OPCODE + len - 4, val);
val = 0;
}
tx_len -= 1;
}
if (len & 3) {
if (len < 4) {
val = swab32(val);
val >>= (4 - len) * 8;
}
mt7621_spi_write(rs, MT7621_SPI_OPCODE + (len & ~3), val);
}
rs->pending_write = len;
}
val = mt7621_spi_read(rs, MT7621_SPI_TRANS);
val |= SPI_CTL_START;
mt7621_spi_write(rs, MT7621_SPI_TRANS, val);
static int mt7621_spi_transfer_half_duplex(struct spi_master *master,
struct spi_message *m)
{
struct mt7621_spi *rs = spi_master_get_devdata(master);
struct spi_device *spi = m->spi;
unsigned int speed = spi->max_speed_hz;
struct spi_transfer *t = NULL;
int status = 0;
mt7621_spi_wait_till_ready(rs);
mt7621_spi_set_cs(spi, 0);
for (i = 0; i < rx_len; i += 4)
data[i / 4] = mt7621_spi_read(rs, MT7621_SPI_DATA0 + i);
list_for_each_entry(t, &m->transfers, transfer_list)
if (t->speed_hz < speed)
speed = t->speed_hz;
m->actual_length = len + rx_len;
if (mt7621_spi_prepare(spi, speed)) {
status = -EIO;
goto msg_done;
}
len = 0;
mt7621_spi_set_cs(spi, 1);
m->actual_length = 0;
list_for_each_entry(t, &m->transfers, transfer_list) {
u8 *buf = t->rx_buf;
if (!buf)
continue;
for (i = 0; i < t->len; i++, len++)
buf[i] = data[len / 4] >> (8 * (len & 3));
if (t->rx_buf)
mt7621_spi_read_half_duplex(rs, t->len, t->rx_buf);
else if (t->tx_buf)
mt7621_spi_write_half_duplex(rs, t->len, t->tx_buf);
m->actual_length += t->len;
}
mt7621_spi_flush(rs);
mt7621_spi_set_cs(spi, 0);
msg_done:
m->status = status;
spi_finalize_current_message(master);
......@@ -383,11 +419,6 @@ static const struct of_device_id mt7621_spi_match[] = {
};
MODULE_DEVICE_TABLE(of, mt7621_spi_match);
static size_t max_transfer_size(struct spi_device *spi)
{
return 32;
}
static int mt7621_spi_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
......@@ -433,7 +464,6 @@ static int mt7621_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->dev.of_node = pdev->dev.of_node;
master->num_chipselect = 2;
master->max_transfer_size = max_transfer_size;
dev_set_drvdata(&pdev->dev, master);
......@@ -443,6 +473,7 @@ static int mt7621_spi_probe(struct platform_device *pdev)
rs->master = master;
rs->sys_freq = clk_get_rate(rs->clk);
rs->ops = ops;
rs->pending_write = 0;
dev_info(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
device_reset(&pdev->dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment