Commit bface0f3 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: das1800: cleanup copyright and comedi comment blocks

Tidy up these multi-line comments to fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 98333021
/*
comedi/drivers/das1800.c
Driver for Keitley das1700/das1800 series boards
Copyright (C) 2000 Frank Mori Hess <fmhess@users.sourceforge.net>
COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 2000 David A. Schleef <ds@schleef.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
*/
/*
Driver: das1800
Description: Keithley Metrabyte DAS1800 (& compatibles)
Author: Frank Mori Hess <fmhess@users.sourceforge.net>
Devices: [Keithley Metrabyte] DAS-1701ST (das-1701st),
DAS-1701ST-DA (das-1701st-da), DAS-1701/AO (das-1701ao),
DAS-1702ST (das-1702st), DAS-1702ST-DA (das-1702st-da),
DAS-1702HR (das-1702hr), DAS-1702HR-DA (das-1702hr-da),
DAS-1702/AO (das-1702ao), DAS-1801ST (das-1801st),
DAS-1801ST-DA (das-1801st-da), DAS-1801HC (das-1801hc),
DAS-1801AO (das-1801ao), DAS-1802ST (das-1802st),
DAS-1802ST-DA (das-1802st-da), DAS-1802HR (das-1802hr),
DAS-1802HR-DA (das-1802hr-da), DAS-1802HC (das-1802hc),
DAS-1802AO (das-1802ao)
Status: works
The waveform analog output on the 'ao' cards is not supported.
If you need it, send me (Frank Hess) an email.
Configuration options:
[0] - I/O port base address
[1] - IRQ (optional, required for timed or externally triggered conversions)
[2] - DMA0 (optional, requires irq)
[3] - DMA1 (optional, requires irq and dma0)
*/
/*
* Comedi driver for Keithley DAS-1700/DAS-1800 series boards
* Copyright (C) 2000 Frank Mori Hess <fmhess@users.sourceforge.net>
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 2000 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
This driver supports the following Keithley boards:
das-1701st
das-1701st-da
das-1701ao
das-1702st
das-1702st-da
das-1702hr
das-1702hr-da
das-1702ao
das-1801st
das-1801st-da
das-1801hc
das-1801ao
das-1802st
das-1802st-da
das-1802hr
das-1802hr-da
das-1802hc
das-1802ao
Options:
[0] - base io address
[1] - irq (optional, required for timed or externally triggered conversions)
[2] - dma0 (optional, requires irq)
[3] - dma1 (optional, requires irq and dma0)
irq can be omitted, although the cmd interface will not work without it.
analog input cmd triggers supported:
start_src: TRIG_NOW | TRIG_EXT
scan_begin_src: TRIG_FOLLOW | TRIG_TIMER | TRIG_EXT
scan_end_src: TRIG_COUNT
convert_src: TRIG_TIMER | TRIG_EXT (TRIG_EXT requires scan_begin_src == TRIG_FOLLOW)
stop_src: TRIG_COUNT | TRIG_EXT | TRIG_NONE
scan_begin_src triggers TRIG_TIMER and TRIG_EXT use the card's
'burst mode' which limits the valid conversion time to 64 microseconds
(convert_arg <= 64000). This limitation does not apply if scan_begin_src
is TRIG_FOLLOW.
NOTES:
Only the DAS-1801ST has been tested by me.
Unipolar and bipolar ranges cannot be mixed in the channel/gain list.
TODO:
Make it automatically allocate irq and dma channels if they are not specified
Add support for analog out on 'ao' cards
*/
/*
* Driver: das1800
* Description: Keithley Metrabyte DAS1800 (& compatibles)
* Author: Frank Mori Hess <fmhess@users.sourceforge.net>
* Devices: [Keithley Metrabyte] DAS-1701ST (das-1701st),
* DAS-1701ST-DA (das-1701st-da), DAS-1701/AO (das-1701ao),
* DAS-1702ST (das-1702st), DAS-1702ST-DA (das-1702st-da),
* DAS-1702HR (das-1702hr), DAS-1702HR-DA (das-1702hr-da),
* DAS-1702/AO (das-1702ao), DAS-1801ST (das-1801st),
* DAS-1801ST-DA (das-1801st-da), DAS-1801HC (das-1801hc),
* DAS-1801AO (das-1801ao), DAS-1802ST (das-1802st),
* DAS-1802ST-DA (das-1802st-da), DAS-1802HR (das-1802hr),
* DAS-1802HR-DA (das-1802hr-da), DAS-1802HC (das-1802hc),
* DAS-1802AO (das-1802ao)
* Status: works
*
* Configuration options:
* [0] - I/O port base address
* [1] - IRQ (optional, required for analog input cmd support)
* [2] - DMA0 (optional, requires irq)
* [3] - DMA1 (optional, requires irq and dma0)
*
* analog input cmd triggers supported:
* start_src: TRIG_NOW | TRIG_EXT
* scan_begin_src: TRIG_FOLLOW | TRIG_TIMER | TRIG_EXT
* scan_end_src: TRIG_COUNT
* convert_src: TRIG_TIMER | TRIG_EXT
* (TRIG_EXT requires scan_begin_src == TRIG_FOLLOW)
* stop_src: TRIG_COUNT | TRIG_EXT | TRIG_NONE
*
* scan_begin_src triggers TRIG_TIMER and TRIG_EXT use the card's
* 'burst mode' which limits the valid conversion time to 64 microseconds
* (convert_arg <= 64000). This limitation does not apply if scan_begin_src
* is TRIG_FOLLOW.
*
* NOTES:
* Only the DAS-1801ST has been tested by me.
* Unipolar and bipolar ranges cannot be mixed in the channel/gain list.
*
* The waveform analog output on the 'ao' cards is not supported.
* If you need it, send me (Frank Hess) an email.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment