Commit bfafba8a authored by Guy Eilam's avatar Guy Eilam Committed by Luciano Coelho

wl12xx: set scan probe requests rate according to the no_cck flag

Set the TX rate of probe requests during scanning according to the
no_cck flag in the scan request struct.
Signed-off-by: default avatarGuy Eilam <guy@wizery.com>
Signed-off-by: default avatarEliad Peller <eliad@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
parent 3f3fd78e
......@@ -440,6 +440,10 @@ struct conf_rx_settings {
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
#define CONF_TX_CCK_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
CONF_HW_BIT_RATE_11MBPS)
#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \
CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
......
......@@ -202,7 +202,6 @@ static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif,
cmd->params.tx_rate = cpu_to_le32(basic_rate);
cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
cmd->params.tx_rate = cpu_to_le32(basic_rate);
cmd->params.tid_trigger = 0;
cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
......@@ -254,7 +253,7 @@ void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif)
struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
int ret = 0;
enum ieee80211_band band;
u32 rate;
u32 rate, mask;
switch (wl->scan.state) {
case WL1271_SCAN_STATE_IDLE:
......@@ -262,7 +261,13 @@ void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif)
case WL1271_SCAN_STATE_2GHZ_ACTIVE:
band = IEEE80211_BAND_2GHZ;
rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
mask = wlvif->bitrate_masks[band];
if (wl->scan.req->no_cck) {
mask &= ~CONF_TX_CCK_RATES;
if (!mask)
mask = CONF_TX_RATE_MASK_BASIC_P2P;
}
rate = wl1271_tx_min_rate_get(wl, mask);
ret = wl1271_scan_send(wl, vif, band, false, rate);
if (ret == WL1271_NOTHING_TO_SCAN) {
wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE;
......@@ -273,7 +278,13 @@ void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif)
case WL1271_SCAN_STATE_2GHZ_PASSIVE:
band = IEEE80211_BAND_2GHZ;
rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
mask = wlvif->bitrate_masks[band];
if (wl->scan.req->no_cck) {
mask &= ~CONF_TX_CCK_RATES;
if (!mask)
mask = CONF_TX_RATE_MASK_BASIC_P2P;
}
rate = wl1271_tx_min_rate_get(wl, mask);
ret = wl1271_scan_send(wl, vif, band, true, rate);
if (ret == WL1271_NOTHING_TO_SCAN) {
if (wl->enable_11a)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment