Commit bfd9b92b authored by Jingle Wu's avatar Jingle Wu Committed by Dmitry Torokhov

Input: elan_i2c - handle firmware updated on newer ICs

Newer ICs with IC type value starting with 0x0D and newer bootloader code
use 128-byte firmware pages. Their bootloader also needs to be switched to
proper mode before executing firmware update.
Signed-off-by: default avatarJingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 059d6c2d
......@@ -74,7 +74,8 @@ struct elan_transport_ops {
int (*iap_get_mode)(struct i2c_client *client, enum tp_mode *mode);
int (*iap_reset)(struct i2c_client *client);
int (*prepare_fw_update)(struct i2c_client *client);
int (*prepare_fw_update)(struct i2c_client *client, u16 ic_type,
u8 iap_version);
int (*write_fw_block)(struct i2c_client *client, u16 fw_page_size,
const u8 *page, u16 checksum, int idx);
int (*finish_fw_update)(struct i2c_client *client,
......
......@@ -101,7 +101,7 @@ struct elan_tp_data {
bool middle_button;
};
static int elan_get_fwinfo(u16 ic_type, u16 *validpage_count,
static int elan_get_fwinfo(u16 ic_type, u8 iap_version, u16 *validpage_count,
u32 *signature_address, u16 *page_size)
{
switch (ic_type) {
......@@ -138,7 +138,12 @@ static int elan_get_fwinfo(u16 ic_type, u16 *validpage_count,
*signature_address =
(*validpage_count * ETP_FW_PAGE_SIZE) - ETP_FW_SIGNATURE_SIZE;
*page_size = ETP_FW_PAGE_SIZE;
if (ic_type >= 0x0D && iap_version >= 1) {
*validpage_count /= 2;
*page_size = ETP_FW_PAGE_SIZE_128;
} else {
*page_size = ETP_FW_PAGE_SIZE;
}
return 0;
}
......@@ -339,7 +344,8 @@ static int elan_query_device_info(struct elan_tp_data *data)
if (error)
return error;
error = elan_get_fwinfo(data->ic_type, &data->fw_validpage_count,
error = elan_get_fwinfo(data->ic_type, data->iap_version,
&data->fw_validpage_count,
&data->fw_signature_address,
&data->fw_page_size);
if (error)
......@@ -459,7 +465,8 @@ static int __elan_update_firmware(struct elan_tp_data *data,
u16 boot_page_count;
u16 sw_checksum = 0, fw_checksum = 0;
error = data->ops->prepare_fw_update(client);
error = data->ops->prepare_fw_update(client, data->ic_type,
data->iap_version);
if (error)
return error;
......
......@@ -56,6 +56,8 @@
#define ETP_I2C_CALIBRATE_CMD 0x0316
#define ETP_I2C_MAX_BASELINE_CMD 0x0317
#define ETP_I2C_MIN_BASELINE_CMD 0x0318
#define ETP_I2C_IAP_TYPE_REG 0x0040
#define ETP_I2C_IAP_TYPE_CMD 0x0304
#define ETP_I2C_REPORT_LEN 34
#define ETP_I2C_DESC_LENGTH 30
......@@ -528,7 +530,43 @@ static int elan_i2c_set_flash_key(struct i2c_client *client)
return 0;
}
static int elan_i2c_prepare_fw_update(struct i2c_client *client)
static int elan_read_write_iap_type(struct i2c_client *client)
{
int error;
u16 constant;
u8 val[3];
int retry = 3;
do {
error = elan_i2c_write_cmd(client, ETP_I2C_IAP_TYPE_CMD,
ETP_I2C_IAP_TYPE_REG);
if (error) {
dev_err(&client->dev,
"cannot write iap type: %d\n", error);
return error;
}
error = elan_i2c_read_cmd(client, ETP_I2C_IAP_TYPE_CMD, val);
if (error) {
dev_err(&client->dev,
"failed to read iap type register: %d\n",
error);
return error;
}
constant = le16_to_cpup((__le16 *)val);
dev_dbg(&client->dev, "iap type reg: 0x%04x\n", constant);
if (constant == ETP_I2C_IAP_TYPE_REG)
return 0;
} while (--retry > 0);
dev_err(&client->dev, "cannot set iap type\n");
return -EIO;
}
static int elan_i2c_prepare_fw_update(struct i2c_client *client, u16 ic_type,
u8 iap_version)
{
struct device *dev = &client->dev;
int error;
......@@ -568,6 +606,12 @@ static int elan_i2c_prepare_fw_update(struct i2c_client *client)
return -EIO;
}
if (ic_type >= 0x0D && iap_version >= 1) {
error = elan_read_write_iap_type(client);
if (error)
return error;
}
/* Set flash key again */
error = elan_i2c_set_flash_key(client);
if (error)
......
......@@ -340,7 +340,8 @@ static int elan_smbus_set_flash_key(struct i2c_client *client)
return 0;
}
static int elan_smbus_prepare_fw_update(struct i2c_client *client)
static int elan_smbus_prepare_fw_update(struct i2c_client *client, u16 ic_type,
u8 iap_version)
{
struct device *dev = &client->dev;
int len;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment