Commit c05e6ff0 authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik

libata-acpi: implement and use ata_acpi_init_gtm()

_GTM fetches currently configured transfer mode while _STM configures
controller according to _GTM parameter and prepares transfer mode
configuration TFs for _GTF.  In many cases _GTM and _STM
implementations are quite brittle and can't cope with configuration
changed by libata.

libata does not depend on ATA ACPI to configure devices.  The only
reason libata performs _GTM and _STM are to make _GTF evaluation
succeed and libata also doesn't care about how _GTF TFs configure
transfer mode.  It overrides that configuration anyway, so from
libata's POV, it doesn't matter what value is feeded to _STM as long
as evaluation succeeds for _STM and following _GTF.

This patch adds dev->__acpi_init_gtm and store initial _GTM values on
host initialization before modified by reset and mode configuration.
If the field is valid, ata_acpi_init_gtm() returns pointer to the
saved _GTM structure; otherwise, NULL.

This saved value is used for _STM during resume and peek at
BIOS/firmware programmed initial timing for later use.  The accessor
is there to make building w/o ACPI easy as dev->__acpi_init doesn't
exist if ACPI is not enabled.

On driver detach, the initial BIOS configuration is restored by
executing _STM with the initial _GTM values such that the next driver
can also use the initial BIOS configured values.
Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 562f0c2d
......@@ -94,6 +94,9 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
}
if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj,
......@@ -199,7 +202,18 @@ void ata_acpi_associate(struct ata_host *host)
*/
void ata_acpi_dissociate(struct ata_host *host)
{
/* nada */
int i;
/* Restore initial _GTM values so that driver which attaches
* afterward can use them too.
*/
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
if (ap->acpi_handle && gtm)
ata_acpi_stm(ap, gtm);
}
}
/**
......@@ -409,22 +423,21 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf,
int ata_acpi_cbl_80wire(struct ata_port *ap)
{
struct ata_acpi_gtm gtm;
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
int valid = 0;
/* No _GTM data, no information */
if (ata_acpi_gtm(ap, &gtm) < 0)
if (!gtm)
return 0;
/* Split timing, DMA enabled */
if ((gtm.flags & 0x11) == 0x11 && gtm.drive[0].dma < 55)
if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55)
valid |= 1;
if ((gtm.flags & 0x14) == 0x14 && gtm.drive[1].dma < 55)
if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55)
valid |= 2;
/* Shared timing, DMA enabled */
if ((gtm.flags & 0x11) == 0x01 && gtm.drive[0].dma < 55)
if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55)
valid |= 1;
if ((gtm.flags & 0x14) == 0x04 && gtm.drive[0].dma < 55)
if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55)
valid |= 2;
/* Drive check */
......@@ -612,27 +625,8 @@ static int ata_acpi_push_id(struct ata_device *dev)
*/
int ata_acpi_on_suspend(struct ata_port *ap)
{
unsigned long flags;
int rc;
/* proceed iff per-port acpi_handle is valid */
if (!ap->acpi_handle)
return 0;
BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
/* store timing parameters */
rc = ata_acpi_gtm(ap, &ap->acpi_gtm);
spin_lock_irqsave(ap->lock, flags);
if (rc == 0)
ap->pflags |= ATA_PFLAG_GTM_VALID;
else
ap->pflags &= ~ATA_PFLAG_GTM_VALID;
spin_unlock_irqrestore(ap->lock, flags);
if (rc == -ENOENT)
rc = 0;
return rc;
/* nada */
return 0;
}
/**
......@@ -647,14 +641,12 @@ int ata_acpi_on_suspend(struct ata_port *ap)
*/
void ata_acpi_on_resume(struct ata_port *ap)
{
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
struct ata_device *dev;
if (ap->acpi_handle && (ap->pflags & ATA_PFLAG_GTM_VALID)) {
BUG_ON(ap->flags & ATA_FLAG_ACPI_SATA);
/* restore timing parameters */
ata_acpi_stm(ap, &ap->acpi_gtm);
}
/* restore timing parameters */
if (ap->acpi_handle && gtm)
ata_acpi_stm(ap, gtm);
/* schedule _GTF */
ata_link_for_each_dev(dev, &ap->link)
......
......@@ -211,7 +211,7 @@ enum {
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */
ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
......@@ -653,7 +653,7 @@ struct ata_port {
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
struct ata_acpi_gtm acpi_gtm;
struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
#endif
u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
};
......@@ -939,10 +939,20 @@ enum {
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
if (ap->pflags & ATA_PFLAG_INIT_GTM_VALID)
return &ap->__acpi_init_gtm;
return NULL;
}
extern int ata_acpi_cbl_80wire(struct ata_port *ap);
int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
#else
static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
{
return NULL;
}
static inline int ata_acpi_cbl_80wire(struct ata_port *ap) { return 0; }
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment