drivers/gpio: gpio-nomadik: Device Tree bindings

This creates Device Tree bindings for the Nomadik GPIO driver.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Split off from the patch actually implementing the bindings]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/db8500.dtsi

@@ -60,6 +60,8 @@ gpio0: gpio@8012e000 {
 			interrupts = <0 119 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <0>;
 		};
 
 		gpio1: gpio@8012e080 {
@@ -69,6 +71,8 @@ gpio1: gpio@8012e080 {
 			interrupts = <0 120 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <1>;
 		};
 
 		gpio2: gpio@8000e000 {
@@ -78,6 +82,8 @@ gpio2: gpio@8000e000 {
 			interrupts = <0 121 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <2>;
 		};
 
 		gpio3: gpio@8000e080 {
@@ -87,6 +93,8 @@ gpio3: gpio@8000e080 {
 			interrupts = <0 122 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <3>;
 		};
 
 		gpio4: gpio@8000e100 {
@@ -96,6 +104,8 @@ gpio4: gpio@8000e100 {
 			interrupts = <0 123 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <4>;
 		};
 
 		gpio5: gpio@8000e180 {
@@ -105,6 +115,8 @@ gpio5: gpio@8000e180 {
 			interrupts = <0 124 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <5>;
 		};
 
 		gpio6: gpio@8011e000 {
@@ -114,6 +126,8 @@ gpio6: gpio@8011e000 {
 			interrupts = <0 125 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <6>;
 		};
 
 		gpio7: gpio@8011e080 {
@@ -123,6 +137,8 @@ gpio7: gpio@8011e080 {
 			interrupts = <0 126 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <7>;
 		};
 
 		gpio8: gpio@a03fe000 {
@@ -132,6 +148,8 @@ gpio8: gpio@a03fe000 {
 			interrupts = <0 127 0x4>;
 			supports-sleepmode;
 			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-bank = <8>;
 		};
 
 		usb@a03e0000 {

arch/arm/boot/dts/snowball.dts

@@ -30,35 +30,35 @@ button@1 {
 			wakeup = <1>;
 			linux,code = <2>;
 			label = "userpb";
-			gpios = <&gpio1 0>;
+			gpios = <&gpio1 0 0>;
 		};
 		button@2 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <3>;
 			label = "userpb";
-			gpios = <&gpio4 23>;
+			gpios = <&gpio4 23 0>;
 		};
 		button@3 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <4>;
 			label = "userpb";
-			gpios = <&gpio4 23>;
+			gpios = <&gpio4 24 0>;
 		};
 		button@4 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <5>;
 			label = "userpb";
-			gpios = <&gpio5 1>;
+			gpios = <&gpio5 1 0>;
 		};
 		button@5 {
 			debounce_interval = <50>;
 			wakeup = <1>;
 			linux,code = <6>;
 			label = "userpb";
-			gpios = <&gpio5 2>;
+			gpios = <&gpio5 2 0>;
 		};
 	};