Merge branch 'next' of...

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into soc-thermal

Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt

@@ -15,6 +15,10 @@ Optional properties:
 - clock-latency: Specify the possible maximum transition latency for clock,
   in unit of nanoseconds.
 - voltage-tolerance: Specify the CPU voltage tolerance in percentage.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+     Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
 
 Examples:
 
@@ -33,6 +37,9 @@ cpus {
 			198000  850000
 		>;
 		clock-latency = <61036>; /* two CLK32 periods */
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <2>;
 	};
 
 	cpu@1 {

MAINTAINERS

@@ -8501,6 +8501,7 @@ S:      Supported
 F:      drivers/thermal/
 F:      include/linux/thermal.h
 F:      include/linux/cpu_cooling.h
+F:      Documentation/devicetree/bindings/thermal/
 
 THINGM BLINK(1) USB RGB LED DRIVER
 M:	Vivien Didelot <vivien.didelot@savoirfairelinux.com>

arch/arm/boot/dts/omap4-cpu-thermal.dtsi

+/*
+ * Device Tree Source for OMAP4/5 SoC CPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+        thermal-sensors = <&bandgap     0>;
+
+        trips {
+                cpu_alert0: cpu_alert {
+                        temperature = <100000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = "passive";
+                };
+                cpu_crit: cpu_crit {
+                        temperature = <125000>; /* millicelsius */
+                        hysteresis = <2000>; /* millicelsius */
+                        type = "critical";
+                };
+        };
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+				<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};

arch/arm/boot/dts/omap443x.dtsi

@@ -12,7 +12,7 @@
 
 / {
 	cpus {
-		cpu@0 {
+		cpu0: cpu@0 {
 			/* OMAP443x variants OPP50-OPPNT */
 			operating-points = <
 				/* kHz    uV */
@@ -22,12 +22,25 @@ cpu@0 {
 				1008000 1375000
 			>;
 			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <3>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
-	bandgap {
-		reg = <0x4a002260 0x4
-		       0x4a00232C 0x4>;
-		compatible = "ti,omap4430-bandgap";
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4>;
+			compatible = "ti,omap4430-bandgap";
+
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };

arch/arm/boot/dts/omap4460.dtsi

@@ -12,7 +12,7 @@
 / {
 	cpus {
 		/* OMAP446x 'standard device' variants OPP50 to OPPTurbo */
-		cpu@0 {
+		cpu0: cpu@0 {
 			operating-points = <
 				/* kHz    uV */
 				350000  1025000
@@ -20,6 +20,11 @@ cpu@0 {
 				920000  1313000
 			>;
 			clock-latency = <300000>; /* From legacy driver */
+
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -30,12 +35,20 @@ pmu {
 		ti,hwmods = "debugss";
 	};
 
-	bandgap {
-		reg = <0x4a002260 0x4
-		       0x4a00232C 0x4
-		       0x4a002378 0x18>;
-		compatible = "ti,omap4460-bandgap";
-		interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
-		gpios = <&gpio3 22 0>; /* tshut */
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+	};
+
+	ocp {
+		bandgap: bandgap {
+			reg = <0x4a002260 0x4
+			       0x4a00232C 0x4
+			       0x4a002378 0x18>;
+			compatible = "ti,omap4460-bandgap";
+			interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */
+			gpios = <&gpio3 22 0>; /* tshut */
+
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };

arch/arm/boot/dts/omap5-core-thermal.dtsi

+/*
+ * Device Tree Source for OMAP543x SoC CORE thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+core_thermal: core_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     2>;
+
+	trips {
+		core_crit: core_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};

arch/arm/boot/dts/omap5-gpu-thermal.dtsi

+/*
+ * Device Tree Source for OMAP543x SoC GPU thermal
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+gpu_thermal: gpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     1>;
+
+	trips {
+		gpu_crit: gpu_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};

arch/arm/boot/dts/omap5.dtsi

@@ -49,6 +49,10 @@ cpu0: cpu@0 {
 				1000000 1060000
 				1500000 1250000
 			>;
+			/* cooling options */
+			cooling-min-level = <0>;
+			cooling-max-level = <2>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 		cpu@1 {
 			device_type = "cpu";
@@ -57,6 +61,12 @@ cpu@1 {
 		};
 	};
 
+	thermal-zones {
+		#include "omap4-cpu-thermal.dtsi"
+		#include "omap5-gpu-thermal.dtsi"
+		#include "omap5-core-thermal.dtsi"
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		/* PPI secure/nonsecure IRQ */
@@ -729,13 +739,15 @@ usbhsehci: ehci@4a064c00 {
 			};
 		};
 
-		bandgap@4a0021e0 {
+		bandgap: bandgap@4a0021e0 {
 			reg = <0x4a0021e0 0xc
 			       0x4a00232c 0xc
 			       0x4a002380 0x2c
 			       0x4a0023C0 0x3c>;
 			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			compatible = "ti,omap5430-bandgap";
+
+			#thermal-sensor-cells = <1>;
 		};
 	};
 };

drivers/cpufreq/Kconfig

@@ -181,7 +181,7 @@ config CPU_FREQ_GOV_CONSERVATIVE
 
 config GENERIC_CPUFREQ_CPU0
 	tristate "Generic CPU0 cpufreq driver"
-	depends on HAVE_CLK && REGULATOR && PM_OPP && OF
+	depends on HAVE_CLK && REGULATOR && PM_OPP && OF && THERMAL && CPU_THERMAL
 	help
 	  This adds a generic cpufreq driver for CPU0 frequency management.
 	  It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)

drivers/cpufreq/cpufreq-cpu0.c

@@ -13,7 +13,9 @@
 
 #include <linux/clk.h>
 #include <linux/cpu.h>
+#include <linux/cpu_cooling.h>
 #include <linux/cpufreq.h>
+#include <linux/cpumask.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -21,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/thermal.h>
 
 static unsigned int transition_latency;
 static unsigned int voltage_tolerance; /* in percentage */
@@ -29,6 +32,7 @@ static struct device *cpu_dev;
 static struct clk *cpu_clk;
 static struct regulator *cpu_reg;
 static struct cpufreq_frequency_table *freq_table;
+static struct thermal_cooling_device *cdev;
 
 static unsigned int cpu0_get_speed(unsigned int cpu)
 {
@@ -201,6 +205,17 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
 		goto out_free_table;
 	}
 
+	/*
+	 * For now, just loading the cooling device;
+	 * thermal DT code takes care of matching them.
+	 */
+	if (of_find_property(np, "#cooling-cells", NULL)) {
+		cdev = of_cpufreq_cooling_register(np, cpu_present_mask);
+		if (IS_ERR(cdev))
+			pr_err("running cpufreq without cooling device: %ld\n",
+			       PTR_ERR(cdev));
+	}
+
 	of_node_put(np);
 	return 0;
 
@@ -213,6 +228,7 @@ static int cpu0_cpufreq_probe(struct platform_device *pdev)
 
 static int cpu0_cpufreq_remove(struct platform_device *pdev)
 {
+	cpufreq_cooling_unregister(cdev);
 	cpufreq_unregister_driver(&cpu0_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 

drivers/hwmon/lm75.c

@@ -27,6 +27,8 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
 #include "lm75.h"
 
 
@@ -71,6 +73,7 @@ static const u8 LM75_REG_TEMP[3] = {
 /* Each client has this additional data */
 struct lm75_data {
 	struct device		*hwmon_dev;
+	struct thermal_zone_device	*tz;
 	struct mutex		update_lock;
 	u8			orig_conf;
 	u8			resolution;	/* In bits, between 9 and 12 */
@@ -91,22 +94,36 @@ static struct lm75_data *lm75_update_device(struct device *dev);
 
 /*-----------------------------------------------------------------------*/
 
+static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
+{
+	return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
+}
+
 /* sysfs attributes for hwmon */
 
+static int lm75_read_temp(void *dev, long *temp)
+{
+	struct lm75_data *data = lm75_update_device(dev);
+
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	*temp = lm75_reg_to_mc(data->temp[0], data->resolution);
+
+	return 0;
+}
+
 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
 			 char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	struct lm75_data *data = lm75_update_device(dev);
-	long temp;
 
 	if (IS_ERR(data))
 		return PTR_ERR(data);
 
-	temp = ((data->temp[attr->index] >> (16 - data->resolution)) * 1000)
-	       >> (data->resolution - 8);
-
-	return sprintf(buf, "%ld\n", temp);
+	return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index],
+						    data->resolution));
 }
 
 static ssize_t set_temp(struct device *dev, struct device_attribute *da,
@@ -273,6 +290,13 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		goto exit_remove;
 	}
 
+	data->tz = thermal_zone_of_sensor_register(&client->dev,
+						   0,
+						   &client->dev,
+						   lm75_read_temp, NULL);
+	if (IS_ERR(data->tz))
+		data->tz = NULL;
+
 	dev_info(&client->dev, "%s: sensor '%s'\n",
 		 dev_name(data->hwmon_dev), client->name);
 
@@ -287,6 +311,7 @@ static int lm75_remove(struct i2c_client *client)
 {
 	struct lm75_data *data = i2c_get_clientdata(client);
 
+	thermal_zone_of_sensor_unregister(&client->dev, data->tz);
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &lm75_group);
 	lm75_write_value(client, LM75_REG_CONF, data->orig_conf);

drivers/hwmon/tmp102.c

@@ -27,6 +27,8 @@
 #include <linux/mutex.h>
 #include <linux/device.h>
 #include <linux/jiffies.h>
+#include <linux/thermal.h>
+#include <linux/of.h>
 
 #define	DRIVER_NAME "tmp102"
 
@@ -50,6 +52,7 @@
 
 struct tmp102 {
 	struct device *hwmon_dev;
+	struct thermal_zone_device *tz;
 	struct mutex lock;
 	u16 config_orig;
 	unsigned long last_update;
@@ -93,6 +96,15 @@ static struct tmp102 *tmp102_update_device(struct i2c_client *client)
 	return tmp102;
 }
 
+static int tmp102_read_temp(void *dev, long *temp)
+{
+	struct tmp102 *tmp102 = tmp102_update_device(to_i2c_client(dev));
+
+	*temp = tmp102->temp[0];
+
+	return 0;
+}
+
 static ssize_t tmp102_show_temp(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
@@ -204,6 +216,12 @@ static int tmp102_probe(struct i2c_client *client,
 		goto fail_remove_sysfs;
 	}
 
+	tmp102->tz = thermal_zone_of_sensor_register(&client->dev, 0,
+						     &client->dev,
+						     tmp102_read_temp, NULL);
+	if (IS_ERR(tmp102->tz))
+		tmp102->tz = NULL;
+
 	dev_info(&client->dev, "initialized\n");
 
 	return 0;
@@ -220,6 +238,7 @@ static int tmp102_remove(struct i2c_client *client)
 {
 	struct tmp102 *tmp102 = i2c_get_clientdata(client);
 
+	thermal_zone_of_sensor_unregister(&client->dev, tmp102->tz);
 	hwmon_device_unregister(tmp102->hwmon_dev);
 	sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
 

drivers/thermal/Kconfig

@@ -29,6 +29,19 @@ config THERMAL_HWMON
 	  Say 'Y' here if you want all thermal sensors to
 	  have hwmon sysfs interface too.
 
+config THERMAL_OF
+	bool
+	prompt "APIs to parse thermal data out of device tree"
+	depends on OF
+	default y
+	help
+	  This options provides helpers to add the support to
+	  read and parse thermal data definitions out of the
+	  device tree blob.
+
+	  Say 'Y' here if you need to build thermal infrastructure
+	  based on device tree.
+
 choice
 	prompt "Default Thermal governor"
 	default THERMAL_DEFAULT_GOV_STEP_WISE
@@ -79,6 +92,7 @@ config THERMAL_GOV_USER_SPACE
 config CPU_THERMAL
 	bool "generic cpu cooling support"
 	depends on CPU_FREQ
+	depends on THERMAL_OF
 	help
 	  This implements the generic cpu cooling mechanism through frequency
 	  reduction. An ACPI version of this already exists

drivers/thermal/Makefile

@@ -7,6 +7,7 @@ thermal_sys-y			+= thermal_core.o
 
 # interface to/from other layers providing sensors
 thermal_sys-$(CONFIG_THERMAL_HWMON)		+= thermal_hwmon.o
+thermal_sys-$(CONFIG_THERMAL_OF)		+= of-thermal.o
 
 # governors
 thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE)	+= fair_share.o

drivers/thermal/cpu_cooling.c

@@ -417,18 +417,21 @@ static struct notifier_block thermal_cpufreq_notifier_block = {
 };
 
 /**
- * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * __cpufreq_cooling_register - helper function to create cpufreq cooling device
+ * @np: a valid struct device_node to the cooling device device tree node
  * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
  *
  * This interface function registers the cpufreq cooling device with the name
  * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
- * cooling devices.
+ * cooling devices. It also gives the opportunity to link the cooling device
+ * with a device tree node, in order to bind it via the thermal DT code.
  *
  * Return: a valid struct thermal_cooling_device pointer on success,
  * on failure, it returns a corresponding ERR_PTR().
  */
-struct thermal_cooling_device *
-cpufreq_cooling_register(const struct cpumask *clip_cpus)
+static struct thermal_cooling_device *
+__cpufreq_cooling_register(struct device_node *np,
+			   const struct cpumask *clip_cpus)
 {
 	struct thermal_cooling_device *cool_dev;
 	struct cpufreq_cooling_device *cpufreq_dev = NULL;
@@ -467,8 +470,8 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
 	snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
 		 cpufreq_dev->id);
 
-	cool_dev = thermal_cooling_device_register(dev_name, cpufreq_dev,
-						   &cpufreq_cooling_ops);
+	cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
+						      &cpufreq_cooling_ops);
 	if (IS_ERR(cool_dev)) {
 		release_idr(&cpufreq_idr, cpufreq_dev->id);
 		kfree(cpufreq_dev);
@@ -488,8 +491,49 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
 
 	return cool_dev;
 }
+
+/**
+ * cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * cooling devices.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+cpufreq_cooling_register(const struct cpumask *clip_cpus)
+{
+	return __cpufreq_cooling_register(NULL, clip_cpus);
+}
 EXPORT_SYMBOL_GPL(cpufreq_cooling_register);
 
+/**
+ * of_cpufreq_cooling_register - function to create cpufreq cooling device.
+ * @np: a valid struct device_node to the cooling device device tree node
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen.
+ *
+ * This interface function registers the cpufreq cooling device with the name
+ * "thermal-cpufreq-%x". This api can support multiple instances of cpufreq
+ * cooling devices. Using this API, the cpufreq cooling device will be
+ * linked to the device tree node provided.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct device_node *np,
+			    const struct cpumask *clip_cpus)
+{
+	if (!np)
+		return ERR_PTR(-EINVAL);
+
+	return __cpufreq_cooling_register(np, clip_cpus);
+}
+EXPORT_SYMBOL_GPL(of_cpufreq_cooling_register);
+
 /**
  * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
  * @cdev: thermal cooling device pointer.

drivers/thermal/thermal_core.c

@@ -34,6 +34,7 @@
 #include <linux/thermal.h>
 #include <linux/reboot.h>
 #include <linux/string.h>
+#include <linux/of.h>
 #include <net/netlink.h>
 #include <net/genetlink.h>
 
@@ -403,7 +404,7 @@ int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
 	enum thermal_trip_type type;
 #endif
 
-	if (!tz || IS_ERR(tz))
+	if (!tz || IS_ERR(tz) || !tz->ops->get_temp)
 		goto exit;
 
 	mutex_lock(&tz->lock);
@@ -456,6 +457,9 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
 {
 	int count;
 
+	if (!tz->ops->get_temp)
+		return;
+
 	update_temperature(tz);
 
 	for (count = 0; count < tz->trips; count++)
@@ -1052,7 +1056,8 @@ static struct class thermal_class = {
 };
 
 /**
- * thermal_cooling_device_register() - register a new thermal cooling device
+ * __thermal_cooling_device_register() - register a new thermal cooling device
+ * @np:		a pointer to a device tree node.
  * @type:	the thermal cooling device type.
  * @devdata:	device private data.
  * @ops:		standard thermal cooling devices callbacks.
@@ -1060,13 +1065,16 @@ static struct class thermal_class = {
  * This interface function adds a new thermal cooling device (fan/processor/...)
  * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
  * to all the thermal zone devices registered at the same time.
+ * It also gives the opportunity to link the cooling device to a device tree
+ * node, so that it can be bound to a thermal zone created out of device tree.
  *
  * Return: a pointer to the created struct thermal_cooling_device or an
  * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
  */
-struct thermal_cooling_device *
-thermal_cooling_device_register(char *type, void *devdata,
-				const struct thermal_cooling_device_ops *ops)
+static struct thermal_cooling_device *
+__thermal_cooling_device_register(struct device_node *np,
+				  char *type, void *devdata,
+				  const struct thermal_cooling_device_ops *ops)
 {
 	struct thermal_cooling_device *cdev;
 	int result;
@@ -1091,6 +1099,7 @@ thermal_cooling_device_register(char *type, void *devdata,
 	strlcpy(cdev->type, type ? : "", sizeof(cdev->type));
 	mutex_init(&cdev->lock);
 	INIT_LIST_HEAD(&cdev->thermal_instances);
+	cdev->np = np;
 	cdev->ops = ops;
 	cdev->updated = true;
 	cdev->device.class = &thermal_class;
@@ -1133,8 +1142,52 @@ thermal_cooling_device_register(char *type, void *devdata,
 	device_unregister(&cdev->device);
 	return ERR_PTR(result);
 }
+
+/**
+ * thermal_cooling_device_register() - register a new thermal cooling device
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_cooling_device_register(char *type, void *devdata,
+				const struct thermal_cooling_device_ops *ops)
+{
+	return __thermal_cooling_device_register(NULL, type, devdata, ops);
+}
 EXPORT_SYMBOL_GPL(thermal_cooling_device_register);
 
+/**
+ * thermal_of_cooling_device_register() - register an OF thermal cooling device
+ * @np:		a pointer to a device tree node.
+ * @type:	the thermal cooling device type.
+ * @devdata:	device private data.
+ * @ops:		standard thermal cooling devices callbacks.
+ *
+ * This function will register a cooling device with device tree node reference.
+ * This interface function adds a new thermal cooling device (fan/processor/...)
+ * to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
+ * to all the thermal zone devices registered at the same time.
+ *
+ * Return: a pointer to the created struct thermal_cooling_device or an
+ * ERR_PTR. Caller must check return value with IS_ERR*() helpers.
+ */
+struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np,
+				   char *type, void *devdata,
+				   const struct thermal_cooling_device_ops *ops)
+{
+	return __thermal_cooling_device_register(np, type, devdata, ops);
+}
+EXPORT_SYMBOL_GPL(thermal_of_cooling_device_register);
+
 /**
  * thermal_cooling_device_unregister - removes the registered thermal cooling device
  * @cdev:	the thermal cooling device to remove.
@@ -1370,7 +1423,7 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
  */
 struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	int trips, int mask, void *devdata,
-	const struct thermal_zone_device_ops *ops,
+	struct thermal_zone_device_ops *ops,
 	const struct thermal_zone_params *tzp,
 	int passive_delay, int polling_delay)
 {
@@ -1386,7 +1439,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 	if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
 		return ERR_PTR(-EINVAL);
 
-	if (!ops || !ops->get_temp)
+	if (!ops)
 		return ERR_PTR(-EINVAL);
 
 	if (trips > 0 && (!ops->get_trip_type || !ops->get_trip_temp))
@@ -1490,6 +1543,9 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type,
 
 	INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
 
+	if (!tz->ops->get_temp)
+		thermal_zone_device_set_polling(tz, 0);
+
 	thermal_zone_device_update(tz);
 
 	if (!result)
@@ -1740,8 +1796,14 @@ static int __init thermal_init(void)
 	if (result)
 		goto unregister_class;
 
+	result = of_parse_thermal_zones();
+	if (result)
+		goto exit_netlink;
+
 	return 0;
 
+exit_netlink:
+	genetlink_exit();
 unregister_governors:
 	thermal_unregister_governors();
 unregister_class:
@@ -1757,6 +1819,7 @@ static int __init thermal_init(void)
 
 static void __exit thermal_exit(void)
 {
+	of_thermal_destroy_zones();
 	genetlink_exit();
 	class_unregister(&thermal_class);
 	thermal_unregister_governors();

drivers/thermal/thermal_core.h

@@ -77,4 +77,13 @@ static inline int thermal_gov_user_space_register(void) { return 0; }
 static inline void thermal_gov_user_space_unregister(void) {}
 #endif /* CONFIG_THERMAL_GOV_USER_SPACE */
 
+/* device tree support */
+#ifdef CONFIG_THERMAL_OF
+int of_parse_thermal_zones(void);
+void of_thermal_destroy_zones(void);
+#else
+static inline int of_parse_thermal_zones(void) { return 0; }
+static inline void of_thermal_destroy_zones(void) { }
+#endif
+
 #endif /* __THERMAL_CORE_H__ */

drivers/thermal/ti-soc-thermal/ti-thermal-common.c

@@ -31,6 +31,7 @@
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
 #include <linux/cpu_cooling.h>
+#include <linux/of.h>
 
 #include "ti-thermal.h"
 #include "ti-bandgap.h"
@@ -44,6 +45,7 @@ struct ti_thermal_data {
 	enum thermal_device_mode mode;
 	struct work_struct thermal_wq;
 	int sensor_id;
+	bool our_zone;
 };
 
 static void ti_thermal_work(struct work_struct *work)
@@ -75,11 +77,10 @@ static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
 
 /* thermal zone ops */
 /* Get temperature callback function for thermal zone*/
-static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
-				      unsigned long *temp)
+static inline int __ti_thermal_get_temp(void *devdata, long *temp)
 {
 	struct thermal_zone_device *pcb_tz = NULL;
-	struct ti_thermal_data *data = thermal->devdata;
+	struct ti_thermal_data *data = devdata;
 	struct ti_bandgap *bgp;
 	const struct ti_temp_sensor *s;
 	int ret, tmp, slope, constant;
@@ -118,6 +119,14 @@ static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
 	return ret;
 }
 
+static inline int ti_thermal_get_temp(struct thermal_zone_device *thermal,
+				      unsigned long *temp)
+{
+	struct ti_thermal_data *data = thermal->devdata;
+
+	return __ti_thermal_get_temp(data, temp);
+}
+
 /* Bind callback functions for thermal zone */
 static int ti_thermal_bind(struct thermal_zone_device *thermal,
 			   struct thermal_cooling_device *cdev)
@@ -230,11 +239,9 @@ static int ti_thermal_get_trip_temp(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-/* Get the temperature trend callback functions for thermal zone */
-static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
-				int trip, enum thermal_trend *trend)
+static int __ti_thermal_get_trend(void *p, long *trend)
 {
-	struct ti_thermal_data *data = thermal->devdata;
+	struct ti_thermal_data *data = p;
 	struct ti_bandgap *bgp;
 	int id, tr, ret = 0;
 
@@ -245,6 +252,22 @@ static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
 	if (ret)
 		return ret;
 
+	*trend = tr;
+
+	return 0;
+}
+
+/* Get the temperature trend callback functions for thermal zone */
+static int ti_thermal_get_trend(struct thermal_zone_device *thermal,
+				int trip, enum thermal_trend *trend)
+{
+	int ret;
+	long tr;
+
+	ret = __ti_thermal_get_trend(thermal->devdata, &tr);
+	if (ret)
+		return ret;
+
 	if (tr > 0)
 		*trend = THERMAL_TREND_RAISING;
 	else if (tr < 0)
@@ -308,16 +331,23 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
 	if (!data)
 		return -EINVAL;
 
-	/* Create thermal zone */
-	data->ti_thermal = thermal_zone_device_register(domain,
+	/* in case this is specified by DT */
+	data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id,
+					data, __ti_thermal_get_temp,
+					__ti_thermal_get_trend);
+	if (IS_ERR(data->ti_thermal)) {
+		/* Create thermal zone */
+		data->ti_thermal = thermal_zone_device_register(domain,
 				OMAP_TRIP_NUMBER, 0, data, &ti_thermal_ops,
 				NULL, FAST_TEMP_MONITORING_RATE,
 				FAST_TEMP_MONITORING_RATE);
-	if (IS_ERR(data->ti_thermal)) {
-		dev_err(bgp->dev, "thermal zone device is NULL\n");
-		return PTR_ERR(data->ti_thermal);
+		if (IS_ERR(data->ti_thermal)) {
+			dev_err(bgp->dev, "thermal zone device is NULL\n");
+			return PTR_ERR(data->ti_thermal);
+		}
+		data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
+		data->our_zone = true;
 	}
-	data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE;
 	ti_bandgap_set_sensor_data(bgp, id, data);
 	ti_bandgap_write_update_interval(bgp, data->sensor_id,
 					data->ti_thermal->polling_delay);
@@ -331,7 +361,13 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 
-	thermal_zone_device_unregister(data->ti_thermal);
+	if (data && data->ti_thermal) {
+		if (data->our_zone)
+			thermal_zone_device_unregister(data->ti_thermal);
+		else
+			thermal_zone_of_sensor_unregister(bgp->dev,
+							  data->ti_thermal);
+	}
 
 	return 0;
 }
@@ -350,6 +386,15 @@ int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
 int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
 {
 	struct ti_thermal_data *data;
+	struct device_node *np = bgp->dev->of_node;
+
+	/*
+	 * We are assuming here that if one deploys the zone
+	 * using DT, then it must be aware that the cooling device
+	 * loading has to happen via cpufreq driver.
+	 */
+	if (of_find_property(np, "#thermal-sensor-cells", NULL))
+		return 0;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
 	if (!data || IS_ERR(data))
@@ -380,7 +425,9 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
 	struct ti_thermal_data *data;
 
 	data = ti_bandgap_get_sensor_data(bgp, id);
-	cpufreq_cooling_unregister(data->cool_dev);
+
+	if (data && data->cool_dev)
+		cpufreq_cooling_unregister(data->cool_dev);
 
 	return 0;
 }

include/dt-bindings/thermal/thermal.h

+/*
+ * This header provides constants for most thermal bindings.
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *	Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * GPLv2 only
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_THERMAL_H
+#define _DT_BINDINGS_THERMAL_THERMAL_H
+
+/* On cooling devices upper and lower limits */
+#define THERMAL_NO_LIMIT		(-1UL)
+
+#endif
+

include/linux/cpu_cooling.h

@@ -24,6 +24,7 @@
 #ifndef __CPU_COOLING_H__
 #define __CPU_COOLING_H__
 
+#include <linux/of.h>
 #include <linux/thermal.h>
 #include <linux/cpumask.h>
 
@@ -35,6 +36,24 @@
 struct thermal_cooling_device *
 cpufreq_cooling_register(const struct cpumask *clip_cpus);
 
+/**
+ * of_cpufreq_cooling_register - create cpufreq cooling device based on DT.
+ * @np: a valid struct device_node to the cooling device device tree node.
+ * @clip_cpus: cpumask of cpus where the frequency constraints will happen
+ */
+#ifdef CONFIG_THERMAL_OF
+struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct device_node *np,
+			    const struct cpumask *clip_cpus);
+#else
+static inline struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct device_node *np,
+			    const struct cpumask *clip_cpus)
+{
+	return NULL;
+}
+#endif
+
 /**
  * cpufreq_cooling_unregister - function to remove cpufreq cooling device.
  * @cdev: thermal cooling device pointer.
@@ -48,6 +67,12 @@ cpufreq_cooling_register(const struct cpumask *clip_cpus)
 {
 	return NULL;
 }
+static inline struct thermal_cooling_device *
+of_cpufreq_cooling_register(struct device_node *np,
+			    const struct cpumask *clip_cpus)
+{
+	return NULL;
+}
 static inline
 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
 {

include/linux/thermal.h

@@ -25,6 +25,7 @@
 #ifndef __THERMAL_H__
 #define __THERMAL_H__
 
+#include <linux/of.h>
 #include <linux/idr.h>
 #include <linux/device.h>
 #include <linux/workqueue.h>
@@ -143,6 +144,7 @@ struct thermal_cooling_device {
 	int id;
 	char type[THERMAL_NAME_LENGTH];
 	struct device device;
+	struct device_node *np;
 	void *devdata;
 	const struct thermal_cooling_device_ops *ops;
 	bool updated; /* true if the cooling device does not need update */
@@ -172,7 +174,7 @@ struct thermal_zone_device {
 	int emul_temperature;
 	int passive;
 	unsigned int forced_passive;
-	const struct thermal_zone_device_ops *ops;
+	struct thermal_zone_device_ops *ops;
 	const struct thermal_zone_params *tzp;
 	struct thermal_governor *governor;
 	struct list_head thermal_instances;
@@ -242,8 +244,31 @@ struct thermal_genl_event {
 };
 
 /* Function declarations */
+#ifdef CONFIG_THERMAL_OF
+struct thermal_zone_device *
+thermal_zone_of_sensor_register(struct device *dev, int id,
+				void *data, int (*get_temp)(void *, long *),
+				int (*get_trend)(void *, long *));
+void thermal_zone_of_sensor_unregister(struct device *dev,
+				       struct thermal_zone_device *tz);
+#else
+static inline struct thermal_zone_device *
+thermal_zone_of_sensor_register(struct device *dev, int id,
+				void *data, int (*get_temp)(void *, long *),
+				int (*get_trend)(void *, long *))
+{
+	return NULL;
+}
+
+static inline
+void thermal_zone_of_sensor_unregister(struct device *dev,
+				       struct thermal_zone_device *tz)
+{
+}
+
+#endif
 struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
-		void *, const struct thermal_zone_device_ops *,
+		void *, struct thermal_zone_device_ops *,
 		const struct thermal_zone_params *, int, int);
 void thermal_zone_device_unregister(struct thermal_zone_device *);
 
@@ -256,6 +281,9 @@ void thermal_zone_device_update(struct thermal_zone_device *);
 
 struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
 		const struct thermal_cooling_device_ops *);
+struct thermal_cooling_device *
+thermal_of_cooling_device_register(struct device_node *np, char *, void *,
+				   const struct thermal_cooling_device_ops *);
 void thermal_cooling_device_unregister(struct thermal_cooling_device *);
 struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
 int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp);