Commit c1c3a526 authored by Gavin Shan's avatar Gavin Shan Committed by Michael Ellerman

powerpc/powernv: Separate function for OPAL IRQ setup

The patch put the OPAL interrupt setup logic in opal_init() into
seperate function opal_irq_init() for easier code maintaining. The
patch doesn't introduce logic changes except:

   * Rename variable names.
   * Release virtual IRQ upon error from request_irq().
   * Don't cache the virtual IRQ to opal_irqs[] upon error from
     request_irq().
Suggested-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: default avatarGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent 08135139
......@@ -701,11 +701,49 @@ static void opal_i2c_create_devs(void)
of_platform_device_create(np, NULL, NULL);
}
static void __init opal_irq_init(struct device_node *dn)
{
const __be32 *irqs;
int i, irqlen;
/* Get interrupt property */
irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
pr_debug("Found %d interrupts reserved for OPAL\n",
irqs ? (irqlen / 4) : 0);
/* Install interrupt handlers */
opal_irq_count = irqlen / 4;
opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL);
for (i = 0; irqs && i < opal_irq_count; i++, irqs++) {
unsigned int irq, virq;
int rc;
/* Get hardware and virtual IRQ */
irq = be32_to_cpup(irqs);
virq = irq_create_mapping(NULL, irq);
if (virq == NO_IRQ) {
pr_warn("Failed to map irq 0x%x\n", irq);
continue;
}
/* Install interrupt handler */
rc = request_irq(virq, opal_interrupt, 0, "opal", NULL);
if (rc) {
irq_dispose_mapping(virq);
pr_warn("Error %d requesting irq %d (0x%x)\n",
rc, virq, irq);
continue;
}
/* Cache IRQ */
opal_irqs[i] = virq;
}
}
static int __init opal_init(void)
{
struct device_node *np, *consoles;
const __be32 *irqs;
int rc, i, irqlen;
int rc;
opal_node = of_find_node_by_path("/ibm,opal");
if (!opal_node) {
......@@ -731,24 +769,7 @@ static int __init opal_init(void)
opal_i2c_create_devs();
/* Find all OPAL interrupts and request them */
irqs = of_get_property(opal_node, "opal-interrupts", &irqlen);
pr_debug("Found %d interrupts reserved for OPAL\n",
irqs ? (irqlen / 4) : 0);
opal_irq_count = irqlen / 4;
opal_irqs = kzalloc(opal_irq_count * sizeof(unsigned int), GFP_KERNEL);
for (i = 0; irqs && i < (irqlen / 4); i++, irqs++) {
unsigned int hwirq = be32_to_cpup(irqs);
unsigned int irq = irq_create_mapping(NULL, hwirq);
if (irq == NO_IRQ) {
pr_warning("Failed to map irq 0x%x\n", hwirq);
continue;
}
rc = request_irq(irq, opal_interrupt, 0, "opal", NULL);
if (rc)
pr_warning("Error %d requesting irq %d (0x%x)\n",
rc, irq, hwirq);
opal_irqs[i] = irq;
}
opal_irq_init(opal_node);
/* Create "opal" kobject under /sys/firmware */
rc = opal_sysfs_init();
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment