hwmon: Retire SENSORS_LIMIT

SENSORS_LIMIT and clamp_val have the same functionality, so retire SENSORS_LIMIT
as it is no longer needed.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Jean Delvare <khali@linux-fr.org>

Documentation/hwmon/sysfs-interface

@@ -722,14 +722,14 @@ add/subtract if it has been divided before the add/subtract.
 What to do if a value is found to be invalid, depends on the type of the
 sysfs attribute that is being set. If it is a continuous setting like a
 tempX_max or inX_max attribute, then the value should be clamped to its
-limits using SENSORS_LIMIT(value, min_limit, max_limit). If it is not
-continuous like for example a tempX_type, then when an invalid value is
-written, -EINVAL should be returned.
+limits using clamp_val(value, min_limit, max_limit). If it is not continuous
+like for example a tempX_type, then when an invalid value is written,
+-EINVAL should be returned.
 
 Example1, temp1_max, register is a signed 8 bit value (-128 - 127 degrees):
 
 	long v = simple_strtol(buf, NULL, 10) / 1000;
-	v = SENSORS_LIMIT(v, -128, 127);
+	v = clamp_val(v, -128, 127);
 	/* write v to register */
 
 Example2, fan divider setting, valid values 2, 4 and 8:

include/linux/hwmon.h

@@ -20,16 +20,4 @@ struct device *hwmon_device_register(struct device *dev);
 
 void hwmon_device_unregister(struct device *dev);
 
-/* Scale user input to sensible values */
-static inline int SENSORS_LIMIT(long value, long low, long high)
-{
-	if (value < low)
-		return low;
-	else if (value > high)
-		return high;
-	else
-		return value;
-}
-
 #endif
-