MIPS: Netlogic: Move cores per node out of multi-node.h

Use the current_cpu_data package field to get the node of the current CPU.

This allows us to remove xlp_cores_per_node and move nlm_threads_per_node()
and nlm_cores_per_node() to netlogic/common.h, which simplifies code.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8889/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/include/asm/mach-netlogic/multi-node.h

@@ -48,15 +48,6 @@
 #endif
 
 #define NLM_THREADS_PER_CORE	4
-#ifdef CONFIG_CPU_XLR
-#define nlm_cores_per_node()	8
-#else
-extern unsigned int xlp_cores_per_node;
-#define nlm_cores_per_node()	xlp_cores_per_node
-#endif
-
-#define nlm_threads_per_node()	(nlm_cores_per_node() * NLM_THREADS_PER_CORE)
-#define nlm_cpuid_to_node(c)	((c) / nlm_threads_per_node())
 
 struct nlm_soc_info {
 	unsigned long	coremask;	/* cores enabled on the soc */

arch/mips/include/asm/netlogic/common.h

@@ -111,6 +111,25 @@ static inline int nlm_irq_to_xirq(int node, int irq)
 	return node * NR_IRQS / NLM_NR_NODES + irq;
 }
 
-extern int nlm_cpu_ready[];
+#ifdef CONFIG_CPU_XLR
+#define nlm_cores_per_node()	8
+#else
+static inline int nlm_cores_per_node(void)
+{
+	return ((read_c0_prid() & PRID_IMP_MASK)
+				== PRID_IMP_NETLOGIC_XLP9XX) ? 32 : 8;
+}
 #endif
+static inline int nlm_threads_per_node(void)
+{
+	return nlm_cores_per_node() * NLM_THREADS_PER_CORE;
+}
+
+static inline int nlm_hwtid_to_node(int hwtid)
+{
+	return hwtid / nlm_threads_per_node();
+}
+
+extern int nlm_cpu_ready[];
+#endif /* __ASSEMBLY__ */
 #endif /* _NETLOGIC_COMMON_H_ */

arch/mips/netlogic/common/irq.c

@@ -230,16 +230,16 @@ static void nlm_init_node_irqs(int node)
 	}
 }
 
-void nlm_smp_irq_init(int hwcpuid)
+void nlm_smp_irq_init(int hwtid)
 {
-	int node, cpu;
+	int cpu, node;
 
-	node = nlm_cpuid_to_node(hwcpuid);
-	cpu  = hwcpuid % nlm_threads_per_node();
+	cpu = hwtid % nlm_threads_per_node();
+	node = hwtid / nlm_threads_per_node();
 
 	if (cpu == 0 && node != 0)
 		nlm_init_node_irqs(node);
-	write_c0_eimr(nlm_current_node()->irqmask);
+	write_c0_eimr(nlm_get_node(node)->irqmask);
 }
 
 asmlinkage void plat_irq_dispatch(void)

arch/mips/netlogic/common/smp.c

@@ -59,17 +59,17 @@
 
 void nlm_send_ipi_single(int logical_cpu, unsigned int action)
 {
-	int cpu, node;
+	unsigned int hwtid;
 	uint64_t picbase;
 
-	cpu = cpu_logical_map(logical_cpu);
-	node = nlm_cpuid_to_node(cpu);
-	picbase = nlm_get_node(node)->picbase;
+	/* node id is part of hwtid, and needed for send_ipi */
+	hwtid = cpu_logical_map(logical_cpu);
+	picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase;
 
 	if (action & SMP_CALL_FUNCTION)
-		nlm_pic_send_ipi(picbase, cpu, IRQ_IPI_SMP_FUNCTION, 0);
+		nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_FUNCTION, 0);
 	if (action & SMP_RESCHEDULE_YOURSELF)
-		nlm_pic_send_ipi(picbase, cpu, IRQ_IPI_SMP_RESCHEDULE, 0);
+		nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_RESCHEDULE, 0);
 }
 
 void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action)
@@ -120,7 +120,7 @@ static void nlm_init_secondary(void)
 
 	hwtid = hard_smp_processor_id();
 	current_cpu_data.core = hwtid / NLM_THREADS_PER_CORE;
-	current_cpu_data.package = nlm_cpuid_to_node(hwtid);
+	current_cpu_data.package = nlm_nodeid();
 	nlm_percpu_init(hwtid);
 	nlm_smp_irq_init(hwtid);
 }
@@ -146,16 +146,18 @@ static cpumask_t phys_cpu_present_mask;
 
 void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
 {
-	int cpu, node;
+	uint64_t picbase;
+	int hwtid;
+
+	hwtid = cpu_logical_map(logical_cpu);
+	picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase;
 
-	cpu = cpu_logical_map(logical_cpu);
-	node = nlm_cpuid_to_node(logical_cpu);
 	nlm_next_sp = (unsigned long)__KSTK_TOS(idle);
 	nlm_next_gp = (unsigned long)task_thread_info(idle);
 
 	/* barrier for sp/gp store above */
 	__sync();
-	nlm_pic_send_ipi(nlm_get_node(node)->picbase, cpu, 1, 1);  /* NMI */
+	nlm_pic_send_ipi(picbase, hwtid, 1, 1);  /* NMI */
 }
 
 void __init nlm_smp_setup(void)
@@ -183,7 +185,7 @@ void __init nlm_smp_setup(void)
 			__cpu_number_map[i] = num_cpus;
 			__cpu_logical_map[num_cpus] = i;
 			set_cpu_possible(num_cpus, true);
-			node = nlm_cpuid_to_node(i);
+			node = nlm_hwtid_to_node(i);
 			cpumask_set_cpu(num_cpus, &nlm_get_node(node)->cpumask);
 			++num_cpus;
 		}

arch/mips/netlogic/xlp/setup.c

@@ -51,7 +51,6 @@ uint64_t nlm_io_base;
 struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
 cpumask_t nlm_cpumask = CPU_MASK_CPU0;
 unsigned int nlm_threads_per_core;
-unsigned int xlp_cores_per_node;
 
 static void nlm_linux_exit(void)
 {
@@ -163,10 +162,6 @@ void __init prom_init(void)
 	void *reset_vec;
 
 	nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
-	if (cpu_is_xlp9xx())
-		xlp_cores_per_node = 32;
-	else
-		xlp_cores_per_node = 8;
 	nlm_init_boot_cpu();
 	xlp_mmu_init();
 	nlm_node_init(0);

arch/mips/netlogic/xlp/wakeup.c

@@ -111,7 +111,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 	struct nlm_soc_info *nodep;
 	uint64_t syspcibase, fusebase;
 	uint32_t syscoremask, mask, fusemask;
-	int core, n, cpu;
+	int core, n, cpu, ncores;
 
 	for (n = 0; n < NLM_NR_NODES; n++) {
 		if (n != 0) {
@@ -168,7 +168,8 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 		syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
 
 		pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
-		for (core = 0; core < nlm_cores_per_node(); core++) {
+		ncores = nlm_cores_per_node();
+		for (core = 0; core < ncores; core++) {
 			/* we will be on node 0 core 0 */
 			if (n == 0 && core == 0)
 				continue;
@@ -178,8 +179,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
 				continue;
 
 			/* see if at least the first hw thread is enabled */
-			cpu = (n * nlm_cores_per_node() + core)
-						* NLM_THREADS_PER_CORE;
+			cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
 			if (!cpumask_test_cpu(cpu, wakeup_mask))
 				continue;