Commit c2736525 authored by Jayachandran C's avatar Jayachandran C Committed by Ralf Baechle

MIPS: Netlogic: Move cores per node out of multi-node.h

Use the current_cpu_data package field to get the node of the current CPU.

This allows us to remove xlp_cores_per_node and move nlm_threads_per_node()
and nlm_cores_per_node() to netlogic/common.h, which simplifies code.
Signed-off-by: default avatarJayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8889/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 65fecc27
......@@ -48,15 +48,6 @@
#endif
#define NLM_THREADS_PER_CORE 4
#ifdef CONFIG_CPU_XLR
#define nlm_cores_per_node() 8
#else
extern unsigned int xlp_cores_per_node;
#define nlm_cores_per_node() xlp_cores_per_node
#endif
#define nlm_threads_per_node() (nlm_cores_per_node() * NLM_THREADS_PER_CORE)
#define nlm_cpuid_to_node(c) ((c) / nlm_threads_per_node())
struct nlm_soc_info {
unsigned long coremask; /* cores enabled on the soc */
......
......@@ -111,6 +111,25 @@ static inline int nlm_irq_to_xirq(int node, int irq)
return node * NR_IRQS / NLM_NR_NODES + irq;
}
extern int nlm_cpu_ready[];
#ifdef CONFIG_CPU_XLR
#define nlm_cores_per_node() 8
#else
static inline int nlm_cores_per_node(void)
{
return ((read_c0_prid() & PRID_IMP_MASK)
== PRID_IMP_NETLOGIC_XLP9XX) ? 32 : 8;
}
#endif
static inline int nlm_threads_per_node(void)
{
return nlm_cores_per_node() * NLM_THREADS_PER_CORE;
}
static inline int nlm_hwtid_to_node(int hwtid)
{
return hwtid / nlm_threads_per_node();
}
extern int nlm_cpu_ready[];
#endif /* __ASSEMBLY__ */
#endif /* _NETLOGIC_COMMON_H_ */
......@@ -230,16 +230,16 @@ static void nlm_init_node_irqs(int node)
}
}
void nlm_smp_irq_init(int hwcpuid)
void nlm_smp_irq_init(int hwtid)
{
int node, cpu;
int cpu, node;
node = nlm_cpuid_to_node(hwcpuid);
cpu = hwcpuid % nlm_threads_per_node();
cpu = hwtid % nlm_threads_per_node();
node = hwtid / nlm_threads_per_node();
if (cpu == 0 && node != 0)
nlm_init_node_irqs(node);
write_c0_eimr(nlm_current_node()->irqmask);
write_c0_eimr(nlm_get_node(node)->irqmask);
}
asmlinkage void plat_irq_dispatch(void)
......
......@@ -59,17 +59,17 @@
void nlm_send_ipi_single(int logical_cpu, unsigned int action)
{
int cpu, node;
unsigned int hwtid;
uint64_t picbase;
cpu = cpu_logical_map(logical_cpu);
node = nlm_cpuid_to_node(cpu);
picbase = nlm_get_node(node)->picbase;
/* node id is part of hwtid, and needed for send_ipi */
hwtid = cpu_logical_map(logical_cpu);
picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase;
if (action & SMP_CALL_FUNCTION)
nlm_pic_send_ipi(picbase, cpu, IRQ_IPI_SMP_FUNCTION, 0);
nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_FUNCTION, 0);
if (action & SMP_RESCHEDULE_YOURSELF)
nlm_pic_send_ipi(picbase, cpu, IRQ_IPI_SMP_RESCHEDULE, 0);
nlm_pic_send_ipi(picbase, hwtid, IRQ_IPI_SMP_RESCHEDULE, 0);
}
void nlm_send_ipi_mask(const struct cpumask *mask, unsigned int action)
......@@ -120,7 +120,7 @@ static void nlm_init_secondary(void)
hwtid = hard_smp_processor_id();
current_cpu_data.core = hwtid / NLM_THREADS_PER_CORE;
current_cpu_data.package = nlm_cpuid_to_node(hwtid);
current_cpu_data.package = nlm_nodeid();
nlm_percpu_init(hwtid);
nlm_smp_irq_init(hwtid);
}
......@@ -146,16 +146,18 @@ static cpumask_t phys_cpu_present_mask;
void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
{
int cpu, node;
uint64_t picbase;
int hwtid;
hwtid = cpu_logical_map(logical_cpu);
picbase = nlm_get_node(nlm_hwtid_to_node(hwtid))->picbase;
cpu = cpu_logical_map(logical_cpu);
node = nlm_cpuid_to_node(logical_cpu);
nlm_next_sp = (unsigned long)__KSTK_TOS(idle);
nlm_next_gp = (unsigned long)task_thread_info(idle);
/* barrier for sp/gp store above */
__sync();
nlm_pic_send_ipi(nlm_get_node(node)->picbase, cpu, 1, 1); /* NMI */
nlm_pic_send_ipi(picbase, hwtid, 1, 1); /* NMI */
}
void __init nlm_smp_setup(void)
......@@ -183,7 +185,7 @@ void __init nlm_smp_setup(void)
__cpu_number_map[i] = num_cpus;
__cpu_logical_map[num_cpus] = i;
set_cpu_possible(num_cpus, true);
node = nlm_cpuid_to_node(i);
node = nlm_hwtid_to_node(i);
cpumask_set_cpu(num_cpus, &nlm_get_node(node)->cpumask);
++num_cpus;
}
......
......@@ -51,7 +51,6 @@ uint64_t nlm_io_base;
struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
cpumask_t nlm_cpumask = CPU_MASK_CPU0;
unsigned int nlm_threads_per_core;
unsigned int xlp_cores_per_node;
static void nlm_linux_exit(void)
{
......@@ -163,10 +162,6 @@ void __init prom_init(void)
void *reset_vec;
nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
if (cpu_is_xlp9xx())
xlp_cores_per_node = 32;
else
xlp_cores_per_node = 8;
nlm_init_boot_cpu();
xlp_mmu_init();
nlm_node_init(0);
......
......@@ -111,7 +111,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
struct nlm_soc_info *nodep;
uint64_t syspcibase, fusebase;
uint32_t syscoremask, mask, fusemask;
int core, n, cpu;
int core, n, cpu, ncores;
for (n = 0; n < NLM_NR_NODES; n++) {
if (n != 0) {
......@@ -168,7 +168,8 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
for (core = 0; core < nlm_cores_per_node(); core++) {
ncores = nlm_cores_per_node();
for (core = 0; core < ncores; core++) {
/* we will be on node 0 core 0 */
if (n == 0 && core == 0)
continue;
......@@ -178,8 +179,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
continue;
/* see if at least the first hw thread is enabled */
cpu = (n * nlm_cores_per_node() + core)
* NLM_THREADS_PER_CORE;
cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
if (!cpumask_test_cpu(cpu, wakeup_mask))
continue;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment