Commit c2af68e5 authored by Ralf Baechle's avatar Ralf Baechle Committed by Jeff Garzik

MIPSsim: General cleanup

General cleanups mostly as suggested by checkpatch plus getting rid of
homebrew version of offsetof().
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 6629b97d
......@@ -7,12 +7,12 @@
#define DEBUG
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/mips-boards/simint.h>
#include "mipsnet.h" /* actual device IO mapping */
......@@ -33,9 +33,8 @@ static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata,
if (available_len < len)
return -EFAULT;
for (; len > 0; len--, kdata++) {
for (; len > 0; len--, kdata++)
*kdata = inb(mipsnet_reg_address(dev, rxDataBuffer));
}
return inl(mipsnet_reg_address(dev, rxDataCount));
}
......@@ -47,16 +46,15 @@ static inline ssize_t mipsnet_put_todevice(struct net_device *dev,
char *buf_ptr = skb->data;
pr_debug("%s: %s(): telling MIPSNET txDataCount(%d)\n",
dev->name, __FUNCTION__, skb->len);
dev->name, __FUNCTION__, skb->len);
outl(skb->len, mipsnet_reg_address(dev, txDataCount));
pr_debug("%s: %s(): sending data to MIPSNET txDataBuffer(%d)\n",
dev->name, __FUNCTION__, skb->len);
dev->name, __FUNCTION__, skb->len);
for (; count_to_go; buf_ptr++, count_to_go--) {
for (; count_to_go; buf_ptr++, count_to_go--)
outb(*buf_ptr, mipsnet_reg_address(dev, txDataBuffer));
}
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
......@@ -67,7 +65,7 @@ static inline ssize_t mipsnet_put_todevice(struct net_device *dev,
static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev)
{
pr_debug("%s:%s(): transmitting %d bytes\n",
dev->name, __FUNCTION__, skb->len);
dev->name, __FUNCTION__, skb->len);
/* Only one packet at a time. Once TXDONE interrupt is serviced, the
* queue will be restarted.
......@@ -83,7 +81,8 @@ static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count)
struct sk_buff *skb;
size_t len = count;
if (!(skb = alloc_skb(len + 2, GFP_KERNEL))) {
skb = alloc_skb(len + 2, GFP_KERNEL);
if (!skb) {
dev->stats.rx_dropped++;
return -ENOMEM;
}
......@@ -96,7 +95,7 @@ static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t count)
skb->ip_summed = CHECKSUM_UNNECESSARY;
pr_debug("%s:%s(): pushing RXed data to kernel\n",
dev->name, __FUNCTION__);
dev->name, __FUNCTION__);
netif_rx(skb);
dev->stats.rx_packets++;
......@@ -114,42 +113,44 @@ static irqreturn_t mipsnet_interrupt(int irq, void *dev_id)
if (irq == dev->irq) {
pr_debug("%s:%s(): irq %d for device\n",
dev->name, __FUNCTION__, irq);
dev->name, __FUNCTION__, irq);
retval = IRQ_HANDLED;
interruptFlags =
inl(mipsnet_reg_address(dev, interruptControl));
pr_debug("%s:%s(): intCtl=0x%016llx\n", dev->name,
__FUNCTION__, interruptFlags);
__FUNCTION__, interruptFlags);
if (interruptFlags & MIPSNET_INTCTL_TXDONE) {
pr_debug("%s:%s(): got TXDone\n",
dev->name, __FUNCTION__);
dev->name, __FUNCTION__);
outl(MIPSNET_INTCTL_TXDONE,
mipsnet_reg_address(dev, interruptControl));
// only one packet at a time, we are done.
/* only one packet at a time, we are done. */
netif_wake_queue(dev);
} else if (interruptFlags & MIPSNET_INTCTL_RXDONE) {
pr_debug("%s:%s(): got RX data\n",
dev->name, __FUNCTION__);
dev->name, __FUNCTION__);
mipsnet_get_fromdev(dev,
inl(mipsnet_reg_address(dev, rxDataCount)));
inl(mipsnet_reg_address(dev, rxDataCount)));
pr_debug("%s:%s(): clearing RX int\n",
dev->name, __FUNCTION__);
dev->name, __FUNCTION__);
outl(MIPSNET_INTCTL_RXDONE,
mipsnet_reg_address(dev, interruptControl));
} else if (interruptFlags & MIPSNET_INTCTL_TESTBIT) {
pr_debug("%s:%s(): got test interrupt\n",
dev->name, __FUNCTION__);
// TESTBIT is cleared on read.
// And takes effect after a write with 0
dev->name, __FUNCTION__);
/*
* TESTBIT is cleared on read.
* And takes effect after a write with 0
*/
outl(0, mipsnet_reg_address(dev, interruptControl));
} else {
pr_debug("%s:%s(): no valid fags 0x%016llx\n",
dev->name, __FUNCTION__, interruptFlags);
// Maybe shared IRQ, just ignore, no clearing.
dev->name, __FUNCTION__, interruptFlags);
/* Maybe shared IRQ, just ignore, no clearing. */
retval = IRQ_NONE;
}
......@@ -159,7 +160,7 @@ static irqreturn_t mipsnet_interrupt(int irq, void *dev_id)
retval = IRQ_NONE;
}
return retval;
} //mipsnet_interrupt()
}
static int mipsnet_open(struct net_device *dev)
{
......@@ -171,18 +172,18 @@ static int mipsnet_open(struct net_device *dev)
if (err) {
pr_debug("%s: %s(): can't get irq %d\n",
dev->name, __FUNCTION__, dev->irq);
dev->name, __FUNCTION__, dev->irq);
release_region(dev->base_addr, MIPSNET_IO_EXTENT);
return err;
}
pr_debug("%s: %s(): got IO region at 0x%04lx and irq %d for dev.\n",
dev->name, __FUNCTION__, dev->base_addr, dev->irq);
dev->name, __FUNCTION__, dev->base_addr, dev->irq);
netif_start_queue(dev);
// test interrupt handler
/* test interrupt handler */
outl(MIPSNET_INTCTL_TESTBIT,
mipsnet_reg_address(dev, interruptControl));
......@@ -199,8 +200,6 @@ static int mipsnet_close(struct net_device *dev)
static void mipsnet_set_mclist(struct net_device *dev)
{
// we don't do anything
return;
}
static int __init mipsnet_probe(struct device *dev)
......@@ -226,13 +225,13 @@ static int __init mipsnet_probe(struct device *dev)
*/
netdev->base_addr = 0x4200;
netdev->irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB0 +
inl(mipsnet_reg_address(netdev, interruptInfo));
inl(mipsnet_reg_address(netdev, interruptInfo));
// Get the io region now, get irq on open()
/* Get the io region now, get irq on open() */
if (!request_region(netdev->base_addr, MIPSNET_IO_EXTENT, "mipsnet")) {
pr_debug("%s: %s(): IO region {start: 0x%04lux, len: %d} "
"for dev is not availble.\n", netdev->name,
__FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT);
"for dev is not availble.\n", netdev->name,
__FUNCTION__, netdev->base_addr, MIPSNET_IO_EXTENT);
err = -EBUSY;
goto out_free_netdev;
}
......
......@@ -9,32 +9,34 @@
/*
* Id of this Net device, as seen by the core.
*/
#define MIPS_NET_DEV_ID ((uint64_t) \
((uint64_t)'M'<< 0)| \
((uint64_t)'I'<< 8)| \
((uint64_t)'P'<<16)| \
((uint64_t)'S'<<24)| \
((uint64_t)'N'<<32)| \
((uint64_t)'E'<<40)| \
((uint64_t)'T'<<48)| \
((uint64_t)'0'<<56))
#define MIPS_NET_DEV_ID ((uint64_t) \
((uint64_t) 'M' << 0)| \
((uint64_t) 'I' << 8)| \
((uint64_t) 'P' << 16)| \
((uint64_t) 'S' << 24)| \
((uint64_t) 'N' << 32)| \
((uint64_t) 'E' << 40)| \
((uint64_t) 'T' << 48)| \
((uint64_t) '0' << 56))
/*
* Net status/control block as seen by sw in the core.
* (Why not use bit fields? can't be bothered with cross-platform struct
* packing.)
*/
typedef struct _net_control_block {
/// dev info for probing
/// reads as MIPSNET%d where %d is some form of version
uint64_t devId; /*0x00 */
struct net_control_block {
/*
* dev info for probing
* reads as MIPSNET%d where %d is some form of version
*/
uint64_t devId; /* 0x00 */
/*
* read only busy flag.
* Set and cleared by the Net Device to indicate that an rx or a tx
* is in progress.
*/
uint32_t busy; /*0x08 */
uint32_t busy; /* 0x08 */
/*
* Set by the Net Device.
......@@ -43,16 +45,16 @@ typedef struct _net_control_block {
* rxDataBuffer. The value will decrease till 0 until all the data
* from rxDataBuffer has been read.
*/
uint32_t rxDataCount; /*0x0c */
uint32_t rxDataCount; /* 0x0c */
#define MIPSNET_MAX_RXTX_DATACOUNT (1<<16)
/*
* Settable from the MIPS core, cleared by the Net Device.
* The core should set the number of bytes it wants to send,
* then it should write those bytes of data to txDataBuffer.
* The device will clear txDataCount has been processed (not necessarily sent).
* Settable from the MIPS core, cleared by the Net Device. The core
* should set the number of bytes it wants to send, then it should
* write those bytes of data to txDataBuffer. The device will clear
* txDataCount has been processed (not necessarily sent).
*/
uint32_t txDataCount; /*0x10 */
uint32_t txDataCount; /* 0x10 */
/*
* Interrupt control
......@@ -69,39 +71,42 @@ typedef struct _net_control_block {
* To clear the test interrupt, write 0 to this register.
*/
uint32_t interruptControl; /*0x14 */
#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1<< 0))
#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1<< 1))
#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1<<31))
#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE|MIPSNET_INTCTL_RXDONE|MIPSNET_INTCTL_TESTBIT)
#define MIPSNET_INTCTL_TXDONE ((uint32_t)(1 << 0))
#define MIPSNET_INTCTL_RXDONE ((uint32_t)(1 << 1))
#define MIPSNET_INTCTL_TESTBIT ((uint32_t)(1 << 31))
#define MIPSNET_INTCTL_ALLSOURCES (MIPSNET_INTCTL_TXDONE | \
MIPSNET_INTCTL_RXDONE | \
MIPSNET_INTCTL_TESTBIT)
/*
* Readonly core-specific interrupt info for the device to signal the core.
* The meaning of the contents of this field might change.
*/
/*###\todo: the whole memIntf interrupt scheme is messy: the device should have
* no control what so ever of what VPE/register set is being used.
* The MemIntf should only expose interrupt lines, and something in the
* config should be responsible for the line<->core/vpe bindings.
* Readonly core-specific interrupt info for the device to signal the
* core. The meaning of the contents of this field might change.
*
* TODO: the whole memIntf interrupt scheme is messy: the device should
* have no control what so ever of what VPE/register set is being
* used. The MemIntf should only expose interrupt lines, and
* something in the config should be responsible for the
* line<->core/vpe bindings.
*/
uint32_t interruptInfo; /*0x18 */
uint32_t interruptInfo; /* 0x18 */
/*
* This is where the received data is read out.
* There is more data to read until rxDataReady is 0.
* Only 1 byte at this regs offset is used.
*/
uint32_t rxDataBuffer; /*0x1c */
uint32_t rxDataBuffer; /* 0x1c */
/*
* This is where the data to transmit is written.
* Data should be written for the amount specified in the txDataCount register.
* Only 1 byte at this regs offset is used.
* This is where the data to transmit is written. Data should be
* written for the amount specified in the txDataCount register. Only
* 1 byte at this regs offset is used.
*/
uint32_t txDataBuffer; /*0x20 */
} MIPS_T_NetControl;
uint32_t txDataBuffer; /* 0x20 */
};
#define MIPSNET_IO_EXTENT 0x40 /* being generous */
#define field_offset(field) ((int)&((MIPS_T_NetControl*)(0))->field)
#define field_offset(field) (offsetof(struct net_control_block, field))
#endif /* __MIPSNET_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment