Commit c3b5003b authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller

tg3: Fix single-vector MSI-X code

Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel)
enabled.  However, kdump only enables one CPU in the new environment,
thus causing tg3 to abort MSI-X setup.  When the driver attempts to
enable INTA or MSI interrupt modes on a kdump kernel, interrupt
delivery fails.

This patch attempts to workaround the problem by forcing the driver
to enable a single MSI-X interrupt.  In such a configuration, the
device's multivector interrupt mode must be disabled.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 77676fdb
...@@ -8846,9 +8846,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) ...@@ -8846,9 +8846,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl); tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100); udelay(100);
if (tg3_flag(tp, USING_MSIX) && tp->irq_cnt > 1) { if (tg3_flag(tp, USING_MSIX)) {
val = tr32(MSGINT_MODE); val = tr32(MSGINT_MODE);
val |= MSGINT_MODE_MULTIVEC_EN | MSGINT_MODE_ENABLE; val |= MSGINT_MODE_ENABLE;
if (tp->irq_cnt > 1)
val |= MSGINT_MODE_MULTIVEC_EN;
if (!tg3_flag(tp, 1SHOT_MSI)) if (!tg3_flag(tp, 1SHOT_MSI))
val |= MSGINT_MODE_ONE_SHOT_DISABLE; val |= MSGINT_MODE_ONE_SHOT_DISABLE;
tw32(MSGINT_MODE, val); tw32(MSGINT_MODE, val);
...@@ -9548,19 +9550,18 @@ static int tg3_request_firmware(struct tg3 *tp) ...@@ -9548,19 +9550,18 @@ static int tg3_request_firmware(struct tg3 *tp)
static bool tg3_enable_msix(struct tg3 *tp) static bool tg3_enable_msix(struct tg3 *tp)
{ {
int i, rc, cpus = num_online_cpus(); int i, rc;
struct msix_entry msix_ent[tp->irq_max]; struct msix_entry msix_ent[tp->irq_max];
if (cpus == 1) tp->irq_cnt = num_online_cpus();
/* Just fallback to the simpler MSI mode. */ if (tp->irq_cnt > 1) {
return false; /* We want as many rx rings enabled as there are cpus.
* In multiqueue MSI-X mode, the first MSI-X vector
/* * only deals with link interrupts, etc, so we add
* We want as many rx rings enabled as there are cpus. * one to the number of vectors we are requesting.
* The first MSIX vector only deals with link interrupts, etc, */
* so we add one to the number of vectors we are requesting. tp->irq_cnt = min_t(unsigned, tp->irq_cnt + 1, tp->irq_max);
*/ }
tp->irq_cnt = min_t(unsigned, cpus + 1, tp->irq_max);
for (i = 0; i < tp->irq_max; i++) { for (i = 0; i < tp->irq_max; i++) {
msix_ent[i].entry = i; msix_ent[i].entry = i;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment