Commit c412c603 authored by Chris Zhong's avatar Chris Zhong Committed by Linus Torvalds

drivers/rtc/rtc-rk808.c: fix rtc time reading issue

After we set the GET_TIME bit, the rtc time can't be read immediately.  We
should wait up to 31.25 us, about one cycle of 32khz.  Otherwise reading
RTC time will return a old time.  If we clear the GET_TIME bit after
setting, the time of i2c transfer is certainly more than 31.25us.

Doug said:

: I think we are safe.  At 400kHz (the max speed of this part) each bit can
: be transferred no faster than 2.5us.  In order to do a valid i2c
: transaction we need to _at least_ write the address of the device and the
: data onto the bus, which is 16 bits.  16 * 2.5us = 40us.  That's above the
: 31.25us

[akpm@linux-foundation.org: tweak comment per review discussion]
Signed-off-by: default avatarChris Zhong <zyw@rock-chips.com>
Reviewed-by: default avatarDoug Anderson <dianders@chromium.org>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Heiko Stübner <heiko@sntech.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 1ef2816f
......@@ -67,15 +67,21 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
/* Force an update of the shadowed registers right now */
ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
0);
BIT_RTC_CTRL_REG_RTC_GET_TIME);
if (ret) {
dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
return ret;
}
/*
* After we set the GET_TIME bit, the rtc time can't be read
* immediately. So we should wait up to 31.25 us, about one cycle of
* 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
* certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
*/
ret = regmap_update_bits(rk808->regmap, RK808_RTC_CTRL_REG,
BIT_RTC_CTRL_REG_RTC_GET_TIME,
BIT_RTC_CTRL_REG_RTC_GET_TIME);
0);
if (ret) {
dev_err(dev, "Failed to update bits rtc_ctrl: %d\n", ret);
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment