Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Rephrase pwrite bounds checking to avoid any potential overflow
  drm/i915: Sanity check pread/pwrite
  drm/i915: Use pipe state to tell when pipe is off
  drm/i915: vblank status not valid while training display port
  drivers/gpu/drm/i915/i915_gem.c: Add missing error handling code
  drm/i915: Fix refleak during eviction.
  drm/i915: fix GMCH power reporting

drivers/gpu/drm/i915/i915_dma.c

@@ -1787,9 +1787,9 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
 		}
 	}
 
-	div_u64(diff, diff1);
+	diff = div_u64(diff, diff1);
 	ret = ((m * diff) + c);
-	div_u64(ret, 10);
+	ret = div_u64(ret, 10);
 
 	dev_priv->last_count1 = total_count;
 	dev_priv->last_time1 = now;
@@ -1858,7 +1858,7 @@ void i915_update_gfx_val(struct drm_i915_private *dev_priv)
 
 	/* More magic constants... */
 	diff = diff * 1181;
-	div_u64(diff, diffms * 10);
+	diff = div_u64(diff, diffms * 10);
 	dev_priv->gfx_power = diff;
 }
 

drivers/gpu/drm/i915/i915_gem.c

@@ -469,14 +469,17 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 		return -ENOENT;
 	obj_priv = to_intel_bo(obj);
 
-	/* Bounds check source.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference_unlocked(obj);
-		return -EINVAL;
+	/* Bounds check source.  */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	if (i915_gem_object_needs_bit17_swizzle(obj)) {
@@ -488,8 +491,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 							file_priv);
 	}
 
+err:
 	drm_gem_object_unreference_unlocked(obj);
-
 	return ret;
 }
 
@@ -578,8 +581,6 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj,
 
 	user_data = (char __user *) (uintptr_t) args->data_ptr;
 	remain = args->size;
-	if (!access_ok(VERIFY_READ, user_data, remain))
-		return -EFAULT;
 
 
 	mutex_lock(&dev->struct_mutex);
@@ -932,14 +933,17 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		return -ENOENT;
 	obj_priv = to_intel_bo(obj);
 
-	/* Bounds check destination.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference_unlocked(obj);
-		return -EINVAL;
+	/* Bounds check destination. */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	/* We can only do the GTT pwrite on untiled buffers, as otherwise
@@ -973,8 +977,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		DRM_INFO("pwrite failed %d\n", ret);
 #endif
 
+err:
 	drm_gem_object_unreference_unlocked(obj);
-
 	return ret;
 }
 
@@ -3256,6 +3260,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 				  (int) reloc->offset,
 				  reloc->read_domains,
 				  reloc->write_domain);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
 			return -EINVAL;
 		}
 		if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||

drivers/gpu/drm/i915/i915_gem_evict.c

@@ -93,7 +93,7 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct list_head eviction_list, unwind_list;
-	struct drm_i915_gem_object *obj_priv, *tmp_obj_priv;
+	struct drm_i915_gem_object *obj_priv;
 	struct list_head *render_iter, *bsd_iter;
 	int ret = 0;
 
@@ -175,39 +175,34 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen
 	return -ENOSPC;
 
 found:
+	/* drm_mm doesn't allow any other other operations while
+	 * scanning, therefore store to be evicted objects on a
+	 * temporary list. */
 	INIT_LIST_HEAD(&eviction_list);
-	list_for_each_entry_safe(obj_priv, tmp_obj_priv,
-				 &unwind_list, evict_list) {
+	while (!list_empty(&unwind_list)) {
+		obj_priv = list_first_entry(&unwind_list,
+					    struct drm_i915_gem_object,
+					    evict_list);
 		if (drm_mm_scan_remove_block(obj_priv->gtt_space)) {
-			/* drm_mm doesn't allow any other other operations while
-			 * scanning, therefore store to be evicted objects on a
-			 * temporary list. */
 			list_move(&obj_priv->evict_list, &eviction_list);
-		} else
-			drm_gem_object_unreference(&obj_priv->base);
+			continue;
+		}
+		list_del(&obj_priv->evict_list);
+		drm_gem_object_unreference(&obj_priv->base);
 	}
 
 	/* Unbinding will emit any required flushes */
-	list_for_each_entry_safe(obj_priv, tmp_obj_priv,
-				 &eviction_list, evict_list) {
-#if WATCH_LRU
-		DRM_INFO("%s: evicting %p\n", __func__, &obj_priv->base);
-#endif
-		ret = i915_gem_object_unbind(&obj_priv->base);
-		if (ret)
-			return ret;
-
+	while (!list_empty(&eviction_list)) {
+		obj_priv = list_first_entry(&eviction_list,
+					    struct drm_i915_gem_object,
+					    evict_list);
+		if (ret == 0)
+			ret = i915_gem_object_unbind(&obj_priv->base);
+		list_del(&obj_priv->evict_list);
 		drm_gem_object_unreference(&obj_priv->base);
 	}
 
-	/* The just created free hole should be on the top of the free stack
-	 * maintained by drm_mm, so this BUG_ON actually executes in O(1).
-	 * Furthermore all accessed data has just recently been used, so it
-	 * should be really fast, too. */
-	BUG_ON(!drm_mm_search_free(&dev_priv->mm.gtt_space, min_size,
-				   alignment, 0));
-
-	return 0;
+	return ret;
 }
 
 int

drivers/gpu/drm/i915/intel_display.c

@@ -1013,8 +1013,8 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 		DRM_DEBUG_KMS("vblank wait timed out\n");
 }
 
-/**
- * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+/*
+ * intel_wait_for_pipe_off - wait for pipe to turn off
  * @dev: drm device
  * @pipe: pipe to wait for
  *
@@ -1022,25 +1022,39 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
  * spinning on the vblank interrupt status bit, since we won't actually
  * see an interrupt when the pipe is disabled.
  *
- * So this function waits for the display line value to settle (it
- * usually ends up stopping at the start of the next frame).
+ * On Gen4 and above:
+ *   wait for the pipe register state bit to turn off
+ *
+ * Otherwise:
+ *   wait for the display line value to settle (it usually
+ *   ends up stopping at the start of the next frame).
+ *  
  */
-void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 last_line;
-
-	/* Wait for the display line to settle */
-	do {
-		last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
-		mdelay(5);
-	} while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
-		 time_after(timeout, jiffies));
-
-	if (time_after(jiffies, timeout))
-		DRM_DEBUG_KMS("vblank wait timed out\n");
+
+	if (INTEL_INFO(dev)->gen >= 4) {
+		int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF);
+
+		/* Wait for the Pipe State to go off */
+		if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0,
+			     100, 0))
+			DRM_DEBUG_KMS("pipe_off wait timed out\n");
+	} else {
+		u32 last_line;
+		int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+		unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+		/* Wait for the display line to settle */
+		do {
+			last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+			mdelay(5);
+		} while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+			 time_after(timeout, jiffies));
+		if (time_after(jiffies, timeout))
+			DRM_DEBUG_KMS("pipe_off wait timed out\n");
+	}
 }
 
 /* Parameters have changed, update FBC info */
@@ -2328,13 +2342,13 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(dspbase_reg);
 		}
 
-		/* Wait for vblank for the disable to take effect */
-		intel_wait_for_vblank_off(dev, pipe);
-
 		/* Don't disable pipe A or pipe A PLLs if needed */
 		if (pipeconf_reg == PIPEACONF &&
-		    (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		    (dev_priv->quirks & QUIRK_PIPEA_FORCE)) {
+			/* Wait for vblank for the disable to take effect */
+			intel_wait_for_vblank(dev, pipe);
 			goto skip_pipe_off;
+		}
 
 		/* Next, disable display pipes */
 		temp = I915_READ(pipeconf_reg);
@@ -2343,8 +2357,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(pipeconf_reg);
 		}
 
-		/* Wait for vblank for the disable to take effect. */
-		intel_wait_for_vblank_off(dev, pipe);
+		/* Wait for the pipe to turn off */
+		intel_wait_for_pipe_off(dev, pipe);
 
 		temp = I915_READ(dpll_reg);
 		if ((temp & DPLL_VCO_ENABLE) != 0) {

drivers/gpu/drm/i915/intel_dp.c

@@ -1138,18 +1138,14 @@ static bool
 intel_dp_set_link_train(struct intel_dp *intel_dp,
 			uint32_t dp_reg_value,
 			uint8_t dp_train_pat,
-			uint8_t train_set[4],
-			bool first)
+			uint8_t train_set[4])
 {
 	struct drm_device *dev = intel_dp->base.enc.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
 	int ret;
 
 	I915_WRITE(intel_dp->output_reg, dp_reg_value);
 	POSTING_READ(intel_dp->output_reg);
-	if (first)
-		intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	intel_dp_aux_native_write_1(intel_dp,
 				    DP_TRAINING_PATTERN_SET,
@@ -1174,10 +1170,15 @@ intel_dp_link_train(struct intel_dp *intel_dp)
 	uint8_t voltage;
 	bool clock_recovery = false;
 	bool channel_eq = false;
-	bool first = true;
 	int tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
+
+	/* Enable output, wait for it to become active */
+	I915_WRITE(intel_dp->output_reg, intel_dp->DP);
+	POSTING_READ(intel_dp->output_reg);
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	/* Write the link configuration data */
 	intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
@@ -1210,9 +1211,8 @@ intel_dp_link_train(struct intel_dp *intel_dp)
 			reg = DP | DP_LINK_TRAIN_PAT_1;
 
 		if (!intel_dp_set_link_train(intel_dp, reg,
-					     DP_TRAINING_PATTERN_1, train_set, first))
+					     DP_TRAINING_PATTERN_1, train_set))
 			break;
-		first = false;
 		/* Set training pattern 1 */
 
 		udelay(100);
@@ -1266,8 +1266,7 @@ intel_dp_link_train(struct intel_dp *intel_dp)
 
 		/* channel eq pattern */
 		if (!intel_dp_set_link_train(intel_dp, reg,
-					     DP_TRAINING_PATTERN_2, train_set,
-					     false))
+					     DP_TRAINING_PATTERN_2, train_set))
 			break;
 
 		udelay(400);

drivers/gpu/drm/i915/intel_drv.h

@@ -229,7 +229,6 @@ extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 						    struct drm_crtc *crtc);
 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
-extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe);
 extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,