Commit c557fa3e authored by Dmitry Baryshkov's avatar Dmitry Baryshkov Committed by Linus Torvalds

gpio: max7301: fix the race between chip addition and pins reconfiguration

There is a small race and code ugliness in max7301: pins are reconfigured
after the chip is registered.  Swap these calls so that the device is
registered in correct state.

Also this fixes the comile-time warning about unchecked gpiochip_remove.
Signed-off-by: default avatarDmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Juergen Beisert <j.beisert@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 4fd5463c
......@@ -255,10 +255,6 @@ static int __devinit max7301_probe(struct spi_device *spi)
ts->chip.dev = &spi->dev;
ts->chip.owner = THIS_MODULE;
ret = gpiochip_add(&ts->chip);
if (ret)
goto exit_destroy;
/*
* tristate all pins in hardware and cache the
* register values for later use.
......@@ -269,17 +265,19 @@ static int __devinit max7301_probe(struct spi_device *spi)
max7301_write(spi, 0x08 + i, 0xAA);
ts->port_config[i] = 0xAA;
for (j = 0; j < 4; j++) {
int idx = ts->chip.base + (i - 1) * 4 + j;
ret = gpio_direction_input(idx);
int offset = (i - 1) * 4 + j;
ret = max7301_direction_input(&ts->chip, offset);
if (ret)
goto exit_remove;
gpio_free(idx);
goto exit_destroy;
}
}
ret = gpiochip_add(&ts->chip);
if (ret)
goto exit_destroy;
return ret;
exit_remove:
gpiochip_remove(&ts->chip);
exit_destroy:
dev_set_drvdata(&spi->dev, NULL);
mutex_destroy(&ts->lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment