Merge tag 'iio-for-5.3b' of...

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO device support, features, cleanups and minor fixes for 5.3.

A few bits for the counters subsystem mixed in here as well.
There are some late breaking fixes as well, which aren't so urgent
they can't wait for the merge window.

New Device Support
* adf4371
  - New driver + bindings.
  - Support the adf4372 PLL. Mostly ID and bindings.
* ad8366 (note includes rework of driver needed to allow support for these).
  - Support the ADL5240 variable gain amplifier (VGA).
  - Support the ADA4961 digital gain amplifier (DGA).
* dps310
  - New driver, in several parts from different authors for this temp
    and pressure sensor.
  - Includes errata workaround for a temperature reading issue.
* stk3310
  - Support the stk3335, mostly ID.

Features and cleanups
* core
  - drop error handling on debugfs registration.
  - harden by making sure we don't overrun iio_chan_info_postfix.
* docs
  - convert remaining docs to rst. At somepoint we'll fit these few
    into the main IIO docs.
  - improve sampling_frequency_available docs but explaining the
    range form.
* ad_sigma_delta
  - Drop a pointless goto.
* ad2s1210
  - Drop pointless platform data null check seeing as we don't actually
    use platform data anymore.
* ad7124
  - Relax limitation on channel numbers to allow pseudo different channels.
  - Support control of whether the input is buffered via DT.
  - Use dynamic allocation for channel configuration to make it easier
    to support new devices.
  - YAML binding conversion.
* ad7150
  - Comment tidy up.
  - Consistent and simple if (ret) handling of i2c errors.
  - FIELD_GET and GENMASK.
  - Ternary rather than !!(condition) for readability.
  - Use macros to avoid repetition of channel definitions.
* ad7606
  - Add software channel config (rather that pin controlled)
  - Refactor to simplify addition of new part in future.
* ad7746
  - of_deivce_id table.
* ad7780
  - MAINTAINERS entry
  - YAML DT bindings.
* ad8366
  - Stop using core mlock in favour of well scoped local lock.
  - SPDX + copyright date update.
* ad9834
  - of_device_id table
* adf4371
  - Add support for output stage muting before lock on has occured.
* adis library
  - MAINTAINERS entry to reflect that this now Alexandru's problem ;)
* adis162xx:
  - Fix a slightly incorrect set of comments and print statements on
    minimum supported voltage.
* adis16203
  - of_device_id table.
* adis16240
  - Add of_device_id table (in two parts as first patch only used it for
    MODULE_DEVICE_TABLE.)
* adt7316-spi
  - of_device_id table
* adxl372
  - YAML DT binding conversion.
  - Cleanup use of buffer callback functions (precursor to core rework).
* bh1710
  - Simplify getting the i2c adapter from the client.
* dht11
  - Mote to newer GPIO consumer interface.
* kxcjk-1013.c
  - Add binding for sensor in display of some ultrabooks after userspace
    tools updated for it not be a problem to report two similar sensors.
* imx7d
  - drop unused variables.
  - white space
  - define instead of variable for clock frequency that is fixed.
  - drop pointless error message.
* messon_saradc
  - SPDX
* sps30
  - MAINTAINERS entry
  - YAML binding conversion.
* st_accel
  - Tidy up ordering in various buffer related callbacks. This is
    part of a long running effort to simplify the core code.
* stm32-dfsdm:
  - Manage the resolution cleanly in triggerd modes.
  - Add fast mode support which allows more flexible filter choices.
  - Add a comment on the reason for a 16 bit record when technically
    not 'required'.
* st_lsm6dsx
  - Embed device name in the sensor_settings struct as i3c doesn't
    have a convenient name field to use for this.
* xilinx-adc
  - Relax constraints on supported platforms to reflect that this
    can used with FPGAs on PCIe cards and hence many architectures.
* counters/ftm-quaddec
  - Fix some formatting io MODULE_AUTHOR
  - MAINTAINERS entry

Fixes
* tools
  - fix incorrect handling of 32 bit channels.
* sca3000
  - Potential endian bug that is unlikely to bite anyone (be64 host
    seems unlikely for this old part).
* stm32-adc
  - Add vdda-supply. On some boards it needs to be turned on to supply
    the ADC.  DT bindings included.
* stm32-dfsdm
  - Fix output resolution to work with filter orders other than 3.
  - Fix output datatype as it's signed and previously claimed not to be.

* tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits)
  iio: iio-utils: Fix possible incorrect mask calculation
  iio: frequency: adf4371: Add support for output stage mute
  dt-bindings: iio: frequency: Add ADF4372 PLL documentation
  iio: frequency: adf4371: Add support for ADF4372 PLL
  dt-bindings: iio: adc: Add buffered input property
  Convert AD7124 bindings documentation to YAML format.
  iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  iio: adc: ad7124: Add buffered input support
  iio: adc: ad7124: Remove input number limitation
  MAINTAINERS: add ADIS IMU driver library entry
  iio: adis162xx: fix low-power docs & reports
  counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
  iio: core: no need to check return value of debugfs_create functions
  docs: iio: convert to ReST
  iio: adc: stm32-adc: add missing vdda-supply
  dt-bindings: iio: adc: stm32: add missing vdda supply
  iio: adc: stm32-dfsdm: add comment for 16 bits record
  iio: adc: stm32-dfsdm: add fast mode support
  iio: adc: stm32-dfsdm: manage data resolution in trigger mode
  iio: adc: stm32-dfsdm: fix data type
  ...

Documentation/ABI/testing/sysfs-bus-iio

@@ -61,8 +61,11 @@ What:		/sys/bus/iio/devices/triggerX/sampling_frequency_available
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
-		When the internal sampling clock can only take a small
-		discrete set of values, this file lists those available.
+		When the internal sampling clock can only take a specific set of
+		frequencies, we can specify the available values with:
+		- a small discrete set of values like "0 2 4 6 8"
+		- a range with minimum, step and maximum frequencies like
+		  "[min step max]"
 
 What:		/sys/bus/iio/devices/iio:deviceX/oversampling_ratio
 KernelVersion:	2.6.38

Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371

+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Stores the PLL frequency in Hz for channel Y.
+		Reading returns the actual frequency in Hz.
+		The ADF4371 has an integrated VCO with fundamendal output
+		frequency ranging from 4000000000 Hz 8000000000 Hz.
+
+		out_altvoltage0_frequency:
+			A divide by 1, 2, 4, 8, 16, 32 or circuit generates
+			frequencies from 62500000 Hz to 8000000000 Hz.
+		out_altvoltage1_frequency:
+			This channel duplicates the channel 0 frequency
+		out_altvoltage2_frequency:
+			A frequency doubler generates frequencies from
+			8000000000 Hz to 16000000000 Hz.
+		out_altvoltage3_frequency:
+			A frequency quadrupler generates frequencies from
+			16000000000 Hz to 32000000000 Hz.
+
+		Note: writes to one of the channels will affect the frequency of
+		all the other channels, since it involves changing the VCO
+		fundamental output frequency.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Reading returns the datasheet name for channel Y:
+
+		out_altvoltage0_name: RF8x
+		out_altvoltage1_name: RFAUX8x
+		out_altvoltage2_name: RF16x
+		out_altvoltage3_name: RF32x
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+KernelVersion:
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute allows the user to power down the PLL and it's
+		RFOut buffers.
+		Writing 1 causes the specified channel to power down.
+		Clearing returns to normal operation.

Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+maintainers:
+  - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+  Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl372.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl372
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        i2c0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* Example for a I2C device node */
+                accelerometer@53 {
+                        compatible = "adi,adxl372";
+                        reg = <0x53>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                };
+        };
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        spi0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                accelerometer@0 {
+                        compatible = "adi,adxl372";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                };
+        };

Documentation/devicetree/bindings/iio/accel/adxl372.txt

-Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
-
-http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
-
-Required properties:
- - compatible : should be "adi,adxl372"
- - reg: the I2C address or SPI chip select number for the device
-
-Required properties for SPI bus usage:
- - spi-max-frequency: Max SPI frequency to use
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ as documented in
-   Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-Example for a I2C device node:
-
-	accelerometer@53 {
-		compatible = "adi,adxl372";
-		reg = <0x53>;
-		interrupt-parent = <&gpio>;
-		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-Example for a SPI device node:
-
-	accelerometer@0 {
-		compatible = "adi,adxl372";
-		reg = <0>;
-		spi-max-frequency = <1000000>;
-		interrupt-parent = <&gpio>;
-		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-	};

Documentation/devicetree/bindings/iio/adc/adi,ad7124.txt

-Analog Devices AD7124 ADC device driver
-
-Required properties for the AD7124:
-	- compatible: Must be one of "adi,ad7124-4" or "adi,ad7124-8"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: Max SPI frequency to use
-		see: Documentation/devicetree/bindings/spi/spi-bus.txt
-	- clocks: phandle to the master clock (mclk)
-		see: Documentation/devicetree/bindings/clock/clock-bindings.txt
-	- clock-names: Must be "mclk".
-	- interrupts: IRQ line for the ADC
-		see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-	  Required properties:
-		* #address-cells: Must be 1.
-		* #size-cells: Must be 0.
-
-	  Subnode(s) represent the external channels which are connected to the ADC.
-	  Each subnode represents one channel and has the following properties:
-		Required properties:
-			* reg: The channel number. It can have up to 4 channels on ad7124-4
-			  and 8 channels on ad7124-8, numbered from 0 to 15.
-			* diff-channels: see: Documentation/devicetree/bindings/iio/adc/adc.txt
-
-		Optional properties:
-			* bipolar: see: Documentation/devicetree/bindings/iio/adc/adc.txt
-			* adi,reference-select: Select the reference source to use when
-			  converting on the the specific channel. Valid values are:
-			  0: REFIN1(+)/REFIN1(−).
-			  1: REFIN2(+)/REFIN2(−).
-			  3: AVDD
-			  If this field is left empty, internal reference is selected.
-
-Optional properties:
-	- refin1-supply: refin1 supply can be used as reference for conversion.
-	- refin2-supply: refin2 supply can be used as reference for conversion.
-	- avdd-supply: avdd supply can be used as reference for conversion.
-
-Example:
-	adc@0 {
-		compatible = "adi,ad7124-4";
-		reg = <0>;
-		spi-max-frequency = <5000000>;
-		interrupts = <25 2>;
-		interrupt-parent = <&gpio>;
-		refin1-supply = <&adc_vref>;
-		clocks = <&ad7124_mclk>;
-		clock-names = "mclk";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@0 {
-			reg = <0>;
-			diff-channels = <0 1>;
-			adi,reference-select = <0>;
-		};
-
-		channel@1 {
-			reg = <1>;
-			bipolar;
-			diff-channels = <2 3>;
-			adi,reference-select = <0>;
-		};
-
-		channel@2 {
-			reg = <2>;
-			diff-channels = <4 5>;
-		};
-
-		channel@3 {
-			reg = <3>;
-			diff-channels = <6 7>;
-		};
-	};

Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Analog Devices Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/iio/adc/adi,ad7124.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7124 ADC device driver
+
+maintainers:
+  - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+  Bindings for the Analog Devices AD7124 ADC device. Datasheet can be
+  found here:
+    https://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-8.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7124-4
+      - adi,ad7124-8
+
+  reg:
+    description: SPI chip select number for the device
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: phandle to the master clock (mclk)
+
+  clock-names:
+    items:
+      - const: mclk
+
+  interrupts:
+    description: IRQ line for the ADC
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  refin1-supply:
+    description: refin1 supply can be used as reference for conversion.
+    maxItems: 1
+
+  refin2-supply:
+    description: refin2 supply can be used as reference for conversion.
+    maxItems: 1
+
+  avdd-supply:
+    description: avdd supply can be used as reference for conversion.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+
+patternProperties:
+  "^channel@([0-9]|1[0-5])$":
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+      See Documentation/devicetree/bindings/iio/adc/adc.txt.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 8 channels on ad7124-4
+          and 16 channels on ad7124-8, numbered from 0 to 15.
+        items:
+         minimum: 0
+         maximum: 15
+
+      adi,reference-select:
+        description: |
+          Select the reference source to use when converting on
+          the specific channel. Valid values are:
+          0: REFIN1(+)/REFIN1(−).
+          1: REFIN2(+)/REFIN2(−).
+          3: AVDD
+          If this field is left empty, internal reference is selected.
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - enum: [0, 1, 3]
+
+      diff-channels:
+        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+        items:
+          minimum: 0
+          maximum: 15
+
+      bipolar:
+        description: see Documentation/devicetree/bindings/iio/adc/adc.txt
+        type: boolean
+
+      adi,buffered-positive:
+        description: Enable buffered mode for positive input.
+        type: boolean
+
+      adi,buffered-negative:
+        description: Enable buffered mode for negative input.
+        type: boolean
+
+    required:
+      - reg
+      - diff-channels
+
+examples:
+  - |
+    adc@0 {
+      compatible = "adi,ad7124-4";
+      reg = <0>;
+      spi-max-frequency = <5000000>;
+      interrupts = <25 2>;
+      interrupt-parent = <&gpio>;
+      refin1-supply = <&adc_vref>;
+      clocks = <&ad7124_mclk>;
+      clock-names = "mclk";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      channel@0 {
+        reg = <0>;
+        diff-channels = <0 1>;
+        adi,reference-select = <0>;
+        adi,buffered-positive;
+      };
+
+      channel@1 {
+        reg = <1>;
+        bipolar;
+        diff-channels = <2 3>;
+        adi,reference-select = <0>;
+        adi,buffered-positive;
+        adi,buffered-negative;
+      };
+
+      channel@2 {
+        reg = <2>;
+        diff-channels = <4 5>;
+      };
+
+      channel@3 {
+        reg = <3>;
+        diff-channels = <6 7>;
+      };
+    };

Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt

-* Analog Devices AD7170/AD7171/AD7780/AD7781
-
-Data sheets:
-
-- AD7170:
-	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
-- AD7171:
-	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
-- AD7780:
-	* https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
-- AD7781:
-	* https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
-
-Required properties:
-
-- compatible: should be one of
-	* "adi,ad7170"
-	* "adi,ad7171"
-	* "adi,ad7780"
-	* "adi,ad7781"
-- reg: spi chip select number for the device
-- vref-supply: the regulator supply for the ADC reference voltage
-
-Optional properties:
-
-- powerdown-gpios:  must be the device tree identifier of the PDRST pin. If
-		    specified, it will be asserted during driver probe. As the
-		    line is active high, it should be marked GPIO_ACTIVE_HIGH.
-- adi,gain-gpios:   must be the device tree identifier of the GAIN pin. Only for
-		    the ad778x chips. If specified, it will be asserted during
-		    driver probe. As the line is active low, it should be marked
-		    GPIO_ACTIVE_LOW.
-- adi,filter-gpios: must be the device tree identifier of the FILTER pin. Only
-		    for the ad778x chips. If specified, it will be asserted
-		    during driver probe. As the line is active low, it should be
-		    marked GPIO_ACTIVE_LOW.
-
-Example:
-
-adc@0 {
-	compatible =  "adi,ad7780";
-	reg =	      <0>;
-	vref-supply = <&vdd_supply>
-
-	powerdown-gpios  = <&gpio 12 GPIO_ACTIVE_HIGH>;
-	adi,gain-gpios   = <&gpio  5 GPIO_ACTIVE_LOW>;
-	adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-};

Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital converters
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  The ad7780 is a sigma-delta analog to digital converter. This driver provides
+  reading voltage values and status bits from both the ad778x and ad717x series.
+  Its interface also allows writing on the FILTER and GAIN GPIO pins on the
+  ad778x.
+
+  Specifications on the converters can be found at:
+    AD7170:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
+    AD7171:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
+    AD7780:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
+    AD7781:
+      https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7170
+      - adi,ad7171
+      - adi,ad7780
+      - adi,ad7781
+
+  reg:
+    maxItems: 1
+
+  avdd-supply:
+    description:
+      The regulator supply for the ADC reference voltage.
+    maxItems: 1
+
+  powerdown-gpios:
+    description:
+      Must be the device tree identifier of the PDRST pin. If
+      specified, it will be asserted during driver probe. As the
+      line is active high, it should be marked GPIO_ACTIVE_HIGH.
+    maxItems: 1
+
+  adi,gain-gpios:
+    description:
+      Must be the device tree identifier of the GAIN pin. Only for
+      the ad778x chips. If specified, it will be asserted during
+      driver probe. As the line is active low, it should be marked
+      GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  adi,filter-gpios:
+    description:
+      Must be the device tree identifier of the FILTER pin. Only
+      for the ad778x chips. If specified, it will be asserted
+      during driver probe. As the line is active low, it should be
+      marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "adi,ad7780";
+            reg = <0>;
+
+            avdd-supply      = <&vdd_supply>;
+            powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+            adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
+            adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+        };
+    };

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt

@@ -38,6 +38,7 @@ Required properties:
     It's required on stm32h7.
 - clock-names: Must be "adc" and/or "bus" depending on part used.
 - interrupt-controller: Identifies the controller node as interrupt-parent
+- vdda-supply: Phandle to the vdda input analog voltage.
 - vref-supply: Phandle to the vref input analog reference voltage.
 - #interrupt-cells = <1>;
 - #address-cells = <1>;

Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.txt

-* Sensirion SPS30 particulate matter sensor
-
-Required properties:
-- compatible: must be "sensirion,sps30"
-- reg: the I2C address of the sensor
-
-Example:
-
-sps30@69 {
-	compatible = "sensirion,sps30";
-	reg = <0x69>;
-};

Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/chemical/sensirion,sps30.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sensirion SPS30 particulate matter sensor
+
+maintainers:
+  - Tomasz Duszynski <tduszyns@gmail.com>
+
+description: |
+  Air pollution sensor capable of measuring mass concentration of dust
+  particles.
+
+properties:
+  compatible:
+    enum:
+      - sensirion,sps30
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      air-pollution-sensor@69 {
+        compatible = "sensirion,sps30";
+        reg = <0x69>;
+      };
+    };
+
+...

Documentation/devicetree/bindings/iio/frequency/adf4371.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/frequency/adf4371.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADF4371/ADF4372 Wideband Synthesizers
+
+maintainers:
+  - Popa Stefan <stefan.popa@analog.com>
+
+description: |
+  Analog Devices ADF4371/ADF4372 SPI Wideband Synthesizers
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdf
+  https://www.analog.com/media/en/technical-documentation/data-sheets/adf4372.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,adf4371
+      - adi,adf4372
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description:
+      Definition of the external clock (see clock/clock-bindings.txt)
+    maxItems: 1
+
+  clock-names:
+    description:
+      Must be "clkin"
+    maxItems: 1
+
+  adi,mute-till-lock-en:
+    type: boolean
+    description:
+      If this property is present, then the supply current to RF8P and RF8N
+      output stage will shut down until the ADF4371/ADF4372 achieves lock as
+      measured by the digital lock detect circuitry.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+examples:
+  - |
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        frequency@0 {
+                compatible = "adi,adf4371";
+                reg = <0>;
+                spi-max-frequency = <1000000>;
+                clocks = <&adf4371_clkin>;
+                clock-names = "clkin";
+        };
+    };
+...

Documentation/iio/ep93xx_adc.txt → Documentation/iio/ep93xx_adc.rst

-Cirrus Logic EP93xx ADC driver.
+==============================
+Cirrus Logic EP93xx ADC driver
+==============================
 
 1. Overview
+===========
 
 The driver is intended to work on both low-end (EP9301, EP9302) devices with
 5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel
 touchscreen/ADC module.
 
 2. Channel numbering
+====================
 
 Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
 EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is
@@ -17,13 +21,20 @@ Assuming ep93xx_adc is IIO device0, you'd find the following entries under
 
   +-----------------+---------------+
   | sysfs entry     | ball/pin name |
-  +-----------------+---------------+
+  +=================+===============+
   | in_voltage0_raw | YM            |
+  +-----------------+---------------+
   | in_voltage1_raw | SXP           |
+  +-----------------+---------------+
   | in_voltage2_raw | SXM           |
+  +-----------------+---------------+
   | in_voltage3_raw | SYP           |
+  +-----------------+---------------+
   | in_voltage4_raw | SYM           |
+  +-----------------+---------------+
   | in_voltage5_raw | XP            |
+  +-----------------+---------------+
   | in_voltage6_raw | XM            |
+  +-----------------+---------------+
   | in_voltage7_raw | YP            |
   +-----------------+---------------+

Documentation/iio/iio_configfs.txt → Documentation/iio/iio_configfs.rst

+===============================
 Industrial IIO configfs support
+===============================
 
 1. Overview
+===========
 
 Configfs is a filesystem-based manager of kernel objects. IIO uses some
 objects that could be easily configured using configfs (e.g.: devices,
@@ -10,20 +13,22 @@ See Documentation/filesystems/configfs/configfs.txt for more information
 about how configfs works.
 
 2. Usage
+========
 
 In order to use configfs support in IIO we need to select it at compile
 time via CONFIG_IIO_CONFIGFS config option.
 
-Then, mount the configfs filesystem (usually under /config directory):
+Then, mount the configfs filesystem (usually under /config directory)::
 
-$ mkdir /config
-$ mount -t configfs none /config
+  $ mkdir /config
+  $ mount -t configfs none /config
 
 At this point, all default IIO groups will be created and can be accessed
 under /config/iio. Next chapters will describe available IIO configuration
 objects.
 
 3. Software triggers
+====================
 
 One of the IIO default configfs groups is the "triggers" group. It is
 automagically accessible when the configfs is mounted and can be found
@@ -31,40 +36,40 @@ under /config/iio/triggers.
 
 IIO software triggers implementation offers support for creating multiple
 trigger types. A new trigger type is usually implemented as a separate
-kernel module following the interface in include/linux/iio/sw_trigger.h:
+kernel module following the interface in include/linux/iio/sw_trigger.h::
 
-/*
- * drivers/iio/trigger/iio-trig-sample.c
- * sample kernel module implementing a new trigger type
- */
-#include <linux/iio/sw_trigger.h>
+  /*
+   * drivers/iio/trigger/iio-trig-sample.c
+   * sample kernel module implementing a new trigger type
+   */
+  #include <linux/iio/sw_trigger.h>
 
 
-static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
-{
+  static struct iio_sw_trigger *iio_trig_sample_probe(const char *name)
+  {
 	/*
 	 * This allocates and registers an IIO trigger plus other
 	 * trigger type specific initialization.
 	 */
-}
+  }
 
-static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
-{
+  static int iio_trig_hrtimer_remove(struct iio_sw_trigger *swt)
+  {
 	/*
 	 * This undoes the actions in iio_trig_sample_probe
 	 */
-}
+  }
 
-static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
+  static const struct iio_sw_trigger_ops iio_trig_sample_ops = {
 	.probe		= iio_trig_sample_probe,
 	.remove		= iio_trig_sample_remove,
-};
+  };
 
-static struct iio_sw_trigger_type iio_trig_sample = {
+  static struct iio_sw_trigger_type iio_trig_sample = {
 	.name = "trig-sample",
 	.owner = THIS_MODULE,
 	.ops = &iio_trig_sample_ops,
-};
+  };
 
 module_iio_sw_trigger_driver(iio_trig_sample);
 
@@ -73,21 +78,24 @@ iio-trig-sample module will create 'trig-sample' trigger type directory
 /config/iio/triggers/trig-sample.
 
 We support the following interrupt sources (trigger types):
+
 	* hrtimer, uses high resolution timers as interrupt source
 
 3.1 Hrtimer triggers creation and destruction
+---------------------------------------------
 
 Loading iio-trig-hrtimer module will register hrtimer trigger types allowing
 users to create hrtimer triggers under /config/iio/triggers/hrtimer.
 
-e.g:
+e.g::
 
-$ mkdir /config/iio/triggers/hrtimer/instance1
-$ rmdir /config/iio/triggers/hrtimer/instance1
+  $ mkdir /config/iio/triggers/hrtimer/instance1
+  $ rmdir /config/iio/triggers/hrtimer/instance1
 
 Each trigger can have one or more attributes specific to the trigger type.
 
 3.2 "hrtimer" trigger types attributes
+--------------------------------------
 
 "hrtimer" trigger type doesn't have any configurable attribute from /config dir.
 It does introduce the sampling_frequency attribute to trigger directory.

Documentation/iio/index.rst

+:orphan:
+
+==============
+Industrial I/O
+==============
+
+.. toctree::
+   :maxdepth: 1
+
+   iio_configfs
+
+   ep93xx_adc

MAINTAINERS

@@ -560,7 +560,7 @@ S:	Supported
 F:	drivers/iio/accel/adxl372.c
 F:	drivers/iio/accel/adxl372_spi.c
 F:	drivers/iio/accel/adxl372_i2c.c
-F:	Documentation/devicetree/bindings/iio/accel/adxl372.txt
+F:	Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
 
 AF9013 MEDIA DRIVER
 M:	Antti Palosaari <crope@iki.fi>
@@ -910,6 +910,15 @@ S:	Supported
 F:	drivers/iio/adc/ad7768-1.c
 F:	Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt
 
+ANALOG DEVICES INC AD7780 DRIVER
+M:	Michael Hennerich <Michael.Hennerich@analog.com>
+M:	Renato Lui Geh <renatogeh@gmail.com>
+L:	linux-iio@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/iio/adc/ad7780.c
+F:	Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+
 ANALOG DEVICES INC AD9389B DRIVER
 M:	Hans Verkuil <hans.verkuil@cisco.com>
 L:	linux-media@vger.kernel.org
@@ -922,6 +931,13 @@ S:	Supported
 F:	drivers/mux/adgs1408.c
 F:	Documentation/devicetree/bindings/mux/adi,adgs1408.txt
 
+ANALOG DEVICES INC ADIS DRIVER LIBRARY
+M:	Alexandru Ardelean <alexandru.ardelean@analog.com>
+S:	Supported
+L:	linux-iio@vger.kernel.org
+F:	include/linux/iio/imu/adis.h
+F:	drivers/iio/imu/adis.c
+
 ANALOG DEVICES INC ADP5061 DRIVER
 M:	Stefan Popa <stefan.popa@analog.com>
 L:	linux-pm@vger.kernel.org
@@ -6219,6 +6235,14 @@ M:	Philip Kelleher <pjk1939@linux.ibm.com>
 S:	Maintained
 F:	drivers/block/rsxx/
 
+FLEXTIMER FTM-QUADDEC DRIVER
+M:	Patrick Havelange <patrick.havelange@essensium.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/ABI/testing/sysfs-bus-counter-ftm-quadddec
+F:	Documentation/devicetree/bindings/counter/ftm-quaddec.txt
+F:	drivers/counter/ftm-quaddec.c
+
 FLOPPY DRIVER
 M:	Jiri Kosina <jikos@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/floppy.git
@@ -7773,6 +7797,12 @@ W:	http://industrypack.sourceforge.net
 S:	Maintained
 F:	drivers/ipack/
 
+INFINEON DPS310 Driver
+M:	Eddie James <eajames@linux.ibm.com>
+L:	linux-iio@vger.kernel.org
+F:	drivers/iio/pressure/dps310.c
+S:	Maintained
+
 INFINIBAND SUBSYSTEM
 M:	Doug Ledford <dledford@redhat.com>
 M:	Jason Gunthorpe <jgg@mellanox.com>
@@ -14161,6 +14191,12 @@ S:	Maintained
 F:	drivers/misc/phantom.c
 F:	include/uapi/linux/phantom.h
 
+SENSIRION SPS30 AIR POLLUTION SENSOR DRIVER
+M:	Tomasz Duszynski <tduszyns@gmail.com>
+S:	Maintained
+F:	drivers/iio/chemical/sps30.c
+F:	Documentation/devicetree/bindings/iio/chemical/sensirion,sps30.yaml
+
 SERIAL DEVICE BUS
 M:	Rob Herring <robh@kernel.org>
 L:	linux-serial@vger.kernel.org

drivers/counter/ftm-quaddec.c

@@ -352,5 +352,5 @@ static struct platform_driver ftm_quaddec_driver = {
 module_platform_driver(ftm_quaddec_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com");
-MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com");
+MODULE_AUTHOR("Kjeld Flarup <kfa@deif.com>");
+MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com>");

drivers/iio/Kconfig

@@ -28,7 +28,7 @@ config IIO_CONFIGFS
 	help
 	  This allows configuring various IIO bits through configfs
 	  (e.g. software triggers). For more info see
-	  Documentation/iio/iio_configfs.txt.
+	  Documentation/iio/iio_configfs.rst.
 
 config IIO_TRIGGER
 	bool "Enable triggered sampling support"

drivers/iio/accel/adis16201.c

@@ -70,7 +70,7 @@
 #define  ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT		2
 /* Power supply above 3.625 V */
 #define  ADIS16201_DIAG_STAT_POWER_HIGH_BIT		1
-/* Power supply below 3.15 V */
+/* Power supply below 2.975 V */
 #define  ADIS16201_DIAG_STAT_POWER_LOW_BIT		0
 
 /* System Command Register Definition */
@@ -230,7 +230,7 @@ static const char * const adis16201_status_error_msgs[] = {
 	[ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
 	[ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
 	[ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
-	[ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+	[ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
 };
 
 static const struct adis_data adis16201_data = {

drivers/iio/accel/adis16209.c

@@ -72,7 +72,7 @@
 #define  ADIS16209_STAT_FLASH_UPT_FAIL_BIT	2
 /* Power supply above 3.625 V */
 #define  ADIS16209_STAT_POWER_HIGH_BIT		1
-/* Power supply below 3.15 V */
+/* Power supply below 2.975 V */
 #define  ADIS16209_STAT_POWER_LOW_BIT		0
 
 #define ADIS16209_CMD_REG			0x3E
@@ -240,7 +240,7 @@ static const char * const adis16209_status_error_msgs[] = {
 	[ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
 	[ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
 	[ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
-	[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+	[ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
 };
 
 static const struct adis_data adis16209_data = {

drivers/iio/accel/adxl372.c

@@ -782,10 +782,14 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
 	unsigned int mask;
 	int i, ret;
 
-	ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0);
+	ret = iio_triggered_buffer_postenable(indio_dev);
 	if (ret < 0)
 		return ret;
 
+	ret = adxl372_set_interrupts(st, ADXL372_INT1_MAP_FIFO_FULL_MSK, 0);
+	if (ret < 0)
+		goto err;
+
 	mask = *indio_dev->active_scan_mask;
 
 	for (i = 0; i < ARRAY_SIZE(adxl372_axis_lookup_table); i++) {
@@ -793,8 +797,10 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
 			break;
 	}
 
-	if (i == ARRAY_SIZE(adxl372_axis_lookup_table))
-		return -EINVAL;
+	if (i == ARRAY_SIZE(adxl372_axis_lookup_table)) {
+		ret = -EINVAL;
+		goto err;
+	}
 
 	st->fifo_format = adxl372_axis_lookup_table[i].fifo_format;
 	st->fifo_set_size = bitmap_weight(indio_dev->active_scan_mask,
@@ -814,26 +820,25 @@ static int adxl372_buffer_postenable(struct iio_dev *indio_dev)
 	if (ret < 0) {
 		st->fifo_mode = ADXL372_FIFO_BYPASSED;
 		adxl372_set_interrupts(st, 0, 0);
-		return ret;
+		goto err;
 	}
 
-	return iio_triggered_buffer_postenable(indio_dev);
+	return 0;
+
+err:
+	iio_triggered_buffer_predisable(indio_dev);
+	return ret;
 }
 
 static int adxl372_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct adxl372_state *st = iio_priv(indio_dev);
-	int ret;
-
-	ret = iio_triggered_buffer_predisable(indio_dev);
-	if (ret < 0)
-		return ret;
 
 	adxl372_set_interrupts(st, 0, 0);
 	st->fifo_mode = ADXL372_FIFO_BYPASSED;
 	adxl372_configure_fifo(st);
 
-	return 0;
+	return iio_triggered_buffer_predisable(indio_dev);
 }
 
 static const struct iio_buffer_setup_ops adxl372_buffer_ops = {

drivers/iio/accel/kxcjk-1013.c

@@ -1487,6 +1487,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KIOX0009", KXTJ21009},
 	{"KIOX000A", KXCJ91008},
 	{"KIOX010A", KXCJ91008}, /* KXCJ91008 inside the display of a 2-in-1 */
+	{"KIOX020A", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
 	{"KXJ2109",  KXTJ21009},
 	{"SMO8500",  KXCJ91008},

drivers/iio/accel/sca3000.c

@@ -869,8 +869,9 @@ static int sca3000_read_event_value(struct iio_dev *indio_dev,
 				    enum iio_event_info info,
 				    int *val, int *val2)
 {
-	int ret, i;
 	struct sca3000_state *st = iio_priv(indio_dev);
+	long ret;
+	int i;
 
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
@@ -882,11 +883,11 @@ static int sca3000_read_event_value(struct iio_dev *indio_dev,
 			return ret;
 		*val = 0;
 		if (chan->channel2 == IIO_MOD_Y)
-			for_each_set_bit(i, (unsigned long *)&ret,
+			for_each_set_bit(i, &ret,
 					 ARRAY_SIZE(st->info->mot_det_mult_y))
 				*val += st->info->mot_det_mult_y[i];
 		else
-			for_each_set_bit(i, (unsigned long *)&ret,
+			for_each_set_bit(i, &ret,
 					 ARRAY_SIZE(st->info->mot_det_mult_xz))
 				*val += st->info->mot_det_mult_xz[i];
 

drivers/iio/accel/st_accel_buffer.c

@@ -45,17 +45,19 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 		goto allocate_memory_error;
 	}
 
-	err = st_sensors_set_axis_enable(indio_dev,
-					(u8)indio_dev->active_scan_mask[0]);
+	err = iio_triggered_buffer_postenable(indio_dev);
 	if (err < 0)
 		goto st_accel_buffer_postenable_error;
 
-	err = iio_triggered_buffer_postenable(indio_dev);
+	err = st_sensors_set_axis_enable(indio_dev,
+					(u8)indio_dev->active_scan_mask[0]);
 	if (err < 0)
-		goto st_accel_buffer_postenable_error;
+		goto st_sensors_set_axis_enable_error;
 
 	return err;
 
+st_sensors_set_axis_enable_error:
+	iio_triggered_buffer_predisable(indio_dev);
 st_accel_buffer_postenable_error:
 	kfree(adata->buffer_data);
 allocate_memory_error:
@@ -64,20 +66,22 @@ static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
 
 static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
 {
-	int err;
+	int err, err2;
 	struct st_sensor_data *adata = iio_priv(indio_dev);
 
-	err = iio_triggered_buffer_predisable(indio_dev);
-	if (err < 0)
-		goto st_accel_buffer_predisable_error;
-
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 	if (err < 0)
 		goto st_accel_buffer_predisable_error;
 
 	err = st_sensors_set_enable(indio_dev, false);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
 
 st_accel_buffer_predisable_error:
+	err2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!err)
+		err = err2;
+
 	kfree(adata->buffer_data);
 	return err;
 }

drivers/iio/adc/Kconfig

@@ -1085,7 +1085,6 @@ config VIPERBOARD_ADC
 
 config XILINX_XADC
 	tristate "Xilinx XADC driver"
-	depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
 	depends on HAS_IOMEM
 	select IIO_BUFFER
 	select IIO_TRIGGERED_BUFFER

drivers/iio/adc/ad7124.c

@@ -61,6 +61,8 @@
 #define AD7124_CONFIG_REF_SEL(x)	FIELD_PREP(AD7124_CONFIG_REF_SEL_MSK, x)
 #define AD7124_CONFIG_PGA_MSK		GENMASK(2, 0)
 #define AD7124_CONFIG_PGA(x)		FIELD_PREP(AD7124_CONFIG_PGA_MSK, x)
+#define AD7124_CONFIG_IN_BUFF_MSK	GENMASK(7, 6)
+#define AD7124_CONFIG_IN_BUFF(x)	FIELD_PREP(AD7124_CONFIG_IN_BUFF_MSK, x)
 
 /* AD7124_FILTER_X */
 #define AD7124_FILTER_FS_MSK		GENMASK(10, 0)
@@ -108,6 +110,8 @@ struct ad7124_chip_info {
 struct ad7124_channel_config {
 	enum ad7124_ref_sel refsel;
 	bool bipolar;
+	bool buf_positive;
+	bool buf_negative;
 	unsigned int ain;
 	unsigned int vref_mv;
 	unsigned int pga_bits;
@@ -117,7 +121,7 @@ struct ad7124_channel_config {
 struct ad7124_state {
 	const struct ad7124_chip_info *chip_info;
 	struct ad_sigma_delta sd;
-	struct ad7124_channel_config channel_config[4];
+	struct ad7124_channel_config *channel_config;
 	struct regulator *vref[4];
 	struct clk *mclk;
 	unsigned int adc_control;
@@ -435,6 +439,7 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 	struct ad7124_state *st = iio_priv(indio_dev);
 	struct device_node *child;
 	struct iio_chan_spec *chan;
+	struct ad7124_channel_config *chan_config;
 	unsigned int ain[2], channel = 0, tmp;
 	int ret;
 
@@ -449,8 +454,14 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 	if (!chan)
 		return -ENOMEM;
 
+	chan_config = devm_kcalloc(indio_dev->dev.parent, st->num_channels,
+				   sizeof(*chan_config), GFP_KERNEL);
+	if (!chan_config)
+		return -ENOMEM;
+
 	indio_dev->channels = chan;
 	indio_dev->num_channels = st->num_channels;
+	st->channel_config = chan_config;
 
 	for_each_available_child_of_node(np, child) {
 		ret = of_property_read_u32(child, "reg", &channel);
@@ -462,13 +473,6 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 		if (ret)
 			goto err;
 
-		if (ain[0] >= st->chip_info->num_inputs ||
-		    ain[1] >= st->chip_info->num_inputs) {
-			dev_err(indio_dev->dev.parent,
-				"Input pin number out of range.\n");
-			ret = -EINVAL;
-			goto err;
-		}
 		st->channel_config[channel].ain = AD7124_CHANNEL_AINP(ain[0]) |
 						  AD7124_CHANNEL_AINM(ain[1]);
 		st->channel_config[channel].bipolar =
@@ -480,6 +484,11 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 		else
 			st->channel_config[channel].refsel = tmp;
 
+		st->channel_config[channel].buf_positive =
+			of_property_read_bool(child, "adi,buffered-positive");
+		st->channel_config[channel].buf_negative =
+			of_property_read_bool(child, "adi,buffered-negative");
+
 		*chan = ad7124_channel_template;
 		chan->address = channel;
 		chan->scan_index = channel;
@@ -499,7 +508,7 @@ static int ad7124_of_parse_channel_config(struct iio_dev *indio_dev,
 static int ad7124_setup(struct ad7124_state *st)
 {
 	unsigned int val, fclk, power_mode;
-	int i, ret;
+	int i, ret, tmp;
 
 	fclk = clk_get_rate(st->mclk);
 	if (!fclk)
@@ -532,8 +541,12 @@ static int ad7124_setup(struct ad7124_state *st)
 		if (ret < 0)
 			return ret;
 
+		tmp = (st->channel_config[i].buf_positive << 1)  +
+			st->channel_config[i].buf_negative;
+
 		val = AD7124_CONFIG_BIPOLAR(st->channel_config[i].bipolar) |
-		      AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel);
+		      AD7124_CONFIG_REF_SEL(st->channel_config[i].refsel) |
+		      AD7124_CONFIG_IN_BUFF(tmp);
 		ret = ad_sd_write_reg(&st->sd, AD7124_CONFIG(i), 2, val);
 		if (ret < 0)
 			return ret;

drivers/iio/adc/ad7606.c

@@ -140,7 +140,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 			   int *val2,
 			   long m)
 {
-	int ret;
+	int ret, ch = 0;
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	switch (m) {
@@ -157,8 +157,10 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 		*val = (short)ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
+		if (st->sw_mode_en)
+			ch = chan->address;
 		*val = 0;
-		*val2 = st->scale_avail[st->range];
+		*val2 = st->scale_avail[st->range[ch]];
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		*val = st->oversampling;
@@ -194,6 +196,32 @@ static ssize_t in_voltage_scale_available_show(struct device *dev,
 
 static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
 
+static int ad7606_write_scale_hw(struct iio_dev *indio_dev, int ch, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+
+	gpiod_set_value(st->gpio_range, val);
+
+	return 0;
+}
+
+static int ad7606_write_os_hw(struct iio_dev *indio_dev, int val)
+{
+	struct ad7606_state *st = iio_priv(indio_dev);
+	DECLARE_BITMAP(values, 3);
+
+	values[0] = val;
+
+	gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
+			      st->gpio_os->info, values);
+
+	/* AD7616 requires a reset to update value */
+	if (st->chip_info->os_req_reset)
+		ad7606_reset(st);
+
+	return 0;
+}
+
 static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int val,
@@ -201,15 +229,20 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
-	DECLARE_BITMAP(values, 3);
-	int i;
+	int i, ret, ch = 0;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
 		mutex_lock(&st->lock);
 		i = find_closest(val2, st->scale_avail, st->num_scales);
-		gpiod_set_value(st->gpio_range, i);
-		st->range = i;
+		if (st->sw_mode_en)
+			ch = chan->address;
+		ret = st->write_scale(indio_dev, ch, i);
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
+		st->range[ch] = i;
 		mutex_unlock(&st->lock);
 
 		return 0;
@@ -218,17 +251,12 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			return -EINVAL;
 		i = find_closest(val, st->oversampling_avail,
 				 st->num_os_ratios);
-
-		values[0] = i;
-
 		mutex_lock(&st->lock);
-		gpiod_set_array_value(ARRAY_SIZE(values), st->gpio_os->desc,
-				      st->gpio_os->info, values);
-
-		/* AD7616 requires a reset to update value */
-		if (st->chip_info->os_req_reset)
-			ad7606_reset(st);
-
+		ret = st->write_os(indio_dev, i);
+		if (ret < 0) {
+			mutex_unlock(&st->lock);
+			return ret;
+		}
 		st->oversampling = st->oversampling_avail[i];
 		mutex_unlock(&st->lock);
 
@@ -536,7 +564,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	st->bops = bops;
 	st->base_address = base_address;
 	/* tied to logic low, analog input range is +/- 5V */
-	st->range = 0;
+	st->range[0] = 0;
 	st->oversampling = 1;
 	st->scale_avail = ad7606_scale_avail;
 	st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
@@ -589,6 +617,39 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	if (ret)
 		dev_warn(st->dev, "failed to RESET: no RESET GPIO specified\n");
 
+	st->write_scale = ad7606_write_scale_hw;
+	st->write_os = ad7606_write_os_hw;
+
+	if (st->chip_info->sw_mode_config)
+		st->sw_mode_en = device_property_present(st->dev,
+							 "adi,sw-mode");
+
+	if (st->sw_mode_en) {
+		/* After reset, in software mode, ±10 V is set by default */
+		memset32(st->range, 2, ARRAY_SIZE(st->range));
+		indio_dev->info = &ad7606_info_os_and_range;
+
+		/*
+		 * In software mode, the range gpio has no longer its function.
+		 * Instead, the scale can be configured individually for each
+		 * channel from the range registers.
+		 */
+		if (st->chip_info->write_scale_sw)
+			st->write_scale = st->chip_info->write_scale_sw;
+
+		/*
+		 * In software mode, the oversampling is no longer configured
+		 * with GPIO pins. Instead, the oversampling can be configured
+		 * in configuratiion register.
+		 */
+		if (st->chip_info->write_os_sw)
+			st->write_os = st->chip_info->write_os_sw;
+
+		ret = st->chip_info->sw_mode_config(indio_dev);
+		if (ret < 0)
+			return ret;
+	}
+
 	st->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
 					  indio_dev->name, indio_dev->id);
 	if (!st->trig)
@@ -643,7 +704,7 @@ static int ad7606_resume(struct device *dev)
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (st->gpio_standby) {
-		gpiod_set_value(st->gpio_range, st->range);
+		gpiod_set_value(st->gpio_range, st->range[0]);
 		gpiod_set_value(st->gpio_standby, 1);
 		ad7606_reset(st);
 	}

drivers/iio/adc/ad7606.h

@@ -16,6 +16,12 @@
  *			oversampling ratios.
  * @oversampling_num	number of elements stored in oversampling_avail array
  * @os_req_reset	some devices require a reset to update oversampling
+ * @write_scale_sw	pointer to the function which writes the scale via spi
+			in software mode
+ * @write_os_sw		pointer to the function which writes the os via spi
+			in software mode
+ * @sw_mode_config:	pointer to a function which configured the device
+ *			for software mode
  */
 struct ad7606_chip_info {
 	const struct iio_chan_spec	*channels;
@@ -23,6 +29,9 @@ struct ad7606_chip_info {
 	const unsigned int		*oversampling_avail;
 	unsigned int			oversampling_num;
 	bool				os_req_reset;
+	int (*write_scale_sw)(struct iio_dev *indio_dev, int ch, int val);
+	int (*write_os_sw)(struct iio_dev *indio_dev, int val);
+	int (*sw_mode_config)(struct iio_dev *indio_dev);
 };
 
 /**
@@ -34,11 +43,14 @@ struct ad7606_chip_info {
  * @range		voltage range selection, selects which scale to apply
  * @oversampling	oversampling selection
  * @base_address	address from where to read data in parallel operation
+ * @sw_mode_en		software mode enabled
  * @scale_avail		pointer to the array which stores the available scales
  * @num_scales		number of elements stored in the scale_avail array
  * @oversampling_avail	pointer to the array which stores the available
  *			oversampling ratios.
  * @num_os_ratios	number of elements stored in oversampling_avail array
+ * @write_scale		pointer to the function which writes the scale
+ * @write_os		pointer to the function which writes the os
  * @lock		protect sensor state from concurrent accesses to GPIOs
  * @gpio_convst	GPIO descriptor for conversion start signal (CONVST)
  * @gpio_reset		GPIO descriptor for device hard-reset
@@ -57,13 +69,16 @@ struct ad7606_state {
 	const struct ad7606_chip_info	*chip_info;
 	struct regulator		*reg;
 	const struct ad7606_bus_ops	*bops;
-	unsigned int			range;
+	unsigned int			range[16];
 	unsigned int			oversampling;
 	void __iomem			*base_address;
+	bool				sw_mode_en;
 	const unsigned int		*scale_avail;
 	unsigned int			num_scales;
 	const unsigned int		*oversampling_avail;
 	unsigned int			num_os_ratios;
+	int (*write_scale)(struct iio_dev *indio_dev, int ch, int val);
+	int (*write_os)(struct iio_dev *indio_dev, int val);
 
 	struct mutex			lock; /* protect sensor state */
 	struct gpio_desc		*gpio_convst;

drivers/iio/adc/ad_sigma_delta.c

@@ -357,7 +357,7 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
 	ret = ad_sigma_delta_set_channel(sigma_delta,
 		indio_dev->channels[channel].address);
 	if (ret)
-		goto err_predisable;
+		return ret;
 
 	spi_bus_lock(sigma_delta->spi->master);
 	sigma_delta->bus_locked = true;
@@ -374,7 +374,6 @@ static int ad_sd_buffer_postenable(struct iio_dev *indio_dev)
 
 err_unlock:
 	spi_bus_unlock(sigma_delta->spi->master);
-err_predisable:
 
 	return ret;
 }

drivers/iio/adc/imx7d_adc.c

@@ -78,6 +78,7 @@
 #define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT		0xf0000
 
 #define IMX7D_ADC_TIMEOUT		msecs_to_jiffies(100)
+#define IMX7D_ADC_INPUT_CLK		24000000
 
 enum imx7d_adc_clk_pre_div {
 	IMX7D_ADC_ANALOG_CLK_PRE_DIV_4,
@@ -100,8 +101,6 @@ struct imx7d_adc_feature {
 	enum imx7d_adc_average_num avg_num;
 
 	u32 core_time_unit;	/* impact the sample rate */
-
-	bool average_en;
 };
 
 struct imx7d_adc {
@@ -179,7 +178,6 @@ static void imx7d_adc_feature_config(struct imx7d_adc *info)
 	info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
 	info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
 	info->adc_feature.core_time_unit = 1;
-	info->adc_feature.average_en = true;
 }
 
 static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
@@ -240,9 +238,8 @@ static void imx7d_adc_channel_set(struct imx7d_adc *info)
 
 	/* the channel choose single conversion, and enable average mode */
 	cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
-		 IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE);
-	if (info->adc_feature.average_en)
-		cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN;
+		 IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE |
+		 IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN);
 
 	/*
 	 * physical channel 0 chose logical channel A
@@ -272,13 +269,11 @@ static void imx7d_adc_channel_set(struct imx7d_adc *info)
 
 static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
 {
-	/* input clock is always 24MHz */
-	u32 input_clk = 24000000;
 	u32 analogue_core_clk;
 	u32 core_time_unit = info->adc_feature.core_time_unit;
 	u32 tmp;
 
-	analogue_core_clk = input_clk / info->pre_div_num;
+	analogue_core_clk = IMX7D_ADC_INPUT_CLK / info->pre_div_num;
 	tmp = (core_time_unit + 1) * 6;
 
 	return analogue_core_clk / tmp;
@@ -493,11 +488,8 @@ static int imx7d_adc_probe(struct platform_device *pdev)
 	info->dev = dev;
 
 	info->regs = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(info->regs)) {
-		ret = PTR_ERR(info->regs);
-		dev_err(dev, "Failed to remap adc memory, err = %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(info->regs))
+		return PTR_ERR(info->regs);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -531,9 +523,7 @@ static int imx7d_adc_probe(struct platform_device *pdev)
 	indio_dev->channels = imx7d_adc_iio_channels;
 	indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
 
-	ret = devm_request_irq(dev, irq,
-			       imx7d_adc_isr, 0,
-			       dev_name(dev), info);
+	ret = devm_request_irq(dev, irq, imx7d_adc_isr, 0, dev_name(dev), info);
 	if (ret < 0) {
 		dev_err(dev, "Failed requesting irq, irq = %d\n", irq);
 		return ret;

drivers/iio/adc/meson_saradc.c

-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Amlogic Meson Successive Approximation Register (SAR) A/D Converter
  *

drivers/iio/adc/stm32-adc-core.c

@@ -87,6 +87,7 @@ struct stm32_adc_priv_cfg {
  * @domain:		irq domain reference
  * @aclk:		clock reference for the analog circuitry
  * @bclk:		bus clock common for all ADCs, depends on part used
+ * @vdda:		vdda analog supply reference
  * @vref:		regulator reference
  * @cfg:		compatible configuration data
  * @common:		common data for all ADC instances
@@ -97,6 +98,7 @@ struct stm32_adc_priv {
 	struct irq_domain		*domain;
 	struct clk			*aclk;
 	struct clk			*bclk;
+	struct regulator		*vdda;
 	struct regulator		*vref;
 	const struct stm32_adc_priv_cfg	*cfg;
 	struct stm32_adc_common		common;
@@ -394,10 +396,16 @@ static int stm32_adc_core_hw_start(struct device *dev)
 	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
 	int ret;
 
+	ret = regulator_enable(priv->vdda);
+	if (ret < 0) {
+		dev_err(dev, "vdda enable failed %d\n", ret);
+		return ret;
+	}
+
 	ret = regulator_enable(priv->vref);
 	if (ret < 0) {
 		dev_err(dev, "vref enable failed\n");
-		return ret;
+		goto err_vdda_disable;
 	}
 
 	if (priv->bclk) {
@@ -425,6 +433,8 @@ static int stm32_adc_core_hw_start(struct device *dev)
 		clk_disable_unprepare(priv->bclk);
 err_regulator_disable:
 	regulator_disable(priv->vref);
+err_vdda_disable:
+	regulator_disable(priv->vdda);
 
 	return ret;
 }
@@ -441,6 +451,7 @@ static void stm32_adc_core_hw_stop(struct device *dev)
 	if (priv->bclk)
 		clk_disable_unprepare(priv->bclk);
 	regulator_disable(priv->vref);
+	regulator_disable(priv->vdda);
 }
 
 static int stm32_adc_probe(struct platform_device *pdev)
@@ -468,6 +479,14 @@ static int stm32_adc_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->common.base);
 	priv->common.phys_base = res->start;
 
+	priv->vdda = devm_regulator_get(&pdev->dev, "vdda");
+	if (IS_ERR(priv->vdda)) {
+		ret = PTR_ERR(priv->vdda);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "vdda get failed, %d\n", ret);
+		return ret;
+	}
+
 	priv->vref = devm_regulator_get(&pdev->dev, "vref");
 	if (IS_ERR(priv->vref)) {
 		ret = PTR_ERR(priv->vref);

drivers/iio/adc/stm32-dfsdm.h

@@ -243,19 +243,33 @@ enum stm32_dfsdm_sinc_order {
 };
 
 /**
- * struct stm32_dfsdm_filter - structure relative to stm32 FDSDM filter
+ * struct stm32_dfsdm_filter_osr - DFSDM filter settings linked to oversampling
  * @iosr: integrator oversampling
  * @fosr: filter oversampling
- * @ford: filter order
+ * @rshift: output sample right shift (hardware shift)
+ * @lshift: output sample left shift (software shift)
  * @res: output sample resolution
+ * @max: output sample maximum positive value
+ */
+struct stm32_dfsdm_filter_osr {
+	unsigned int iosr;
+	unsigned int fosr;
+	unsigned int rshift;
+	unsigned int lshift;
+	u64 res;
+	s32 max;
+};
+
+/**
+ * struct stm32_dfsdm_filter - structure relative to stm32 FDSDM filter
+ * @ford: filter order
+ * @flo: filter oversampling data table indexed by fast mode flag
  * @sync_mode: filter synchronized with filter 0
  * @fast: filter fast mode
  */
 struct stm32_dfsdm_filter {
-	unsigned int iosr;
-	unsigned int fosr;
 	enum stm32_dfsdm_sinc_order ford;
-	u64 res;
+	struct stm32_dfsdm_filter_osr flo[2];
 	unsigned int sync_mode;
 	unsigned int fast;
 };

drivers/iio/amplifiers/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: GPL-2.0
 #
 # Gain Amplifiers, etc.
 #
@@ -7,12 +7,17 @@
 menu "Amplifiers"
 
 config AD8366
-	tristate "Analog Devices AD8366 VGA"
+	tristate "Analog Devices AD8366 and similar Gain Amplifiers"
 	depends on SPI
+	depends on GPIOLIB
 	select BITREVERSE
 	help
-	  Say yes here to build support for Analog Devices AD8366
-	  SPI Dual-Digital Variable Gain Amplifier (VGA).
+	  Say yes here to build support for Analog Devices AD8366 and similar
+	  gain amplifiers. This driver supports the following gain amplifiers
+	  from Analog Devices:
+	    AD8366 Dual-Digital Variable Gain Amplifier (VGA)
+	    ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
+	    ADL5240 Digitally controlled variable gain amplifier (VGA)
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad8366.

drivers/iio/amplifiers/ad8366.c

-// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-License-Identifier: GPL-2.0
 /*
- * AD8366 SPI Dual-Digital Variable Gain Amplifier (VGA)
+ * AD8366 and similar Gain Amplifiers
+ * This driver supports the following gain amplifiers:
+ *   AD8366 Dual-Digital Variable Gain Amplifier (VGA)
+ *   ADA4961 BiCMOS RF Digital Gain Amplifier (DGA)
+ *   ADL5240 Digitally controlled variable gain amplifier (VGA)
  *
- * Copyright 2012 Analog Devices Inc.
+ * Copyright 2012-2019 Analog Devices Inc.
  */
 
 #include <linux/device.h>
@@ -11,6 +15,7 @@
 #include <linux/sysfs.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/consumer.h>
+#include <linux/gpio/consumer.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/bitrev.h>
@@ -18,10 +23,25 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
+enum ad8366_type {
+	ID_AD8366,
+	ID_ADA4961,
+	ID_ADL5240,
+};
+
+struct ad8366_info {
+	int gain_min;
+	int gain_max;
+};
+
 struct ad8366_state {
 	struct spi_device	*spi;
 	struct regulator	*reg;
+	struct mutex            lock; /* protect sensor state */
+	struct gpio_desc	*reset_gpio;
 	unsigned char		ch[2];
+	enum ad8366_type	type;
+	struct ad8366_info	*info;
 	/*
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache lines.
@@ -29,19 +49,44 @@ struct ad8366_state {
 	unsigned char		data[2] ____cacheline_aligned;
 };
 
+static struct ad8366_info ad8366_infos[] = {
+	[ID_AD8366] = {
+		.gain_min = 4500,
+		.gain_max = 20500,
+	},
+	[ID_ADA4961] = {
+		.gain_min = -6000,
+		.gain_max = 15000,
+	},
+	[ID_ADL5240] = {
+		.gain_min = -11500,
+		.gain_max = 20000,
+	},
+};
+
 static int ad8366_write(struct iio_dev *indio_dev,
 			unsigned char ch_a, unsigned char ch_b)
 {
 	struct ad8366_state *st = iio_priv(indio_dev);
 	int ret;
 
-	ch_a = bitrev8(ch_a & 0x3F);
-	ch_b = bitrev8(ch_b & 0x3F);
+	switch (st->type) {
+	case ID_AD8366:
+		ch_a = bitrev8(ch_a & 0x3F);
+		ch_b = bitrev8(ch_b & 0x3F);
 
-	st->data[0] = ch_b >> 4;
-	st->data[1] = (ch_b << 4) | (ch_a >> 2);
+		st->data[0] = ch_b >> 4;
+		st->data[1] = (ch_b << 4) | (ch_a >> 2);
+		break;
+	case ID_ADA4961:
+		st->data[0] = ch_a & 0x1F;
+		break;
+	case ID_ADL5240:
+		st->data[0] = (ch_a & 0x3F);
+		break;
+	}
 
-	ret = spi_write(st->spi, st->data, ARRAY_SIZE(st->data));
+	ret = spi_write(st->spi, st->data, indio_dev->num_channels);
 	if (ret < 0)
 		dev_err(&indio_dev->dev, "write failed (%d)", ret);
 
@@ -56,24 +101,35 @@ static int ad8366_read_raw(struct iio_dev *indio_dev,
 {
 	struct ad8366_state *st = iio_priv(indio_dev);
 	int ret;
-	unsigned code;
+	int code, gain = 0;
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	switch (m) {
 	case IIO_CHAN_INFO_HARDWAREGAIN:
 		code = st->ch[chan->channel];
 
+		switch (st->type) {
+		case ID_AD8366:
+			gain = code * 253 + 4500;
+			break;
+		case ID_ADA4961:
+			gain = 15000 - code * 1000;
+			break;
+		case ID_ADL5240:
+			gain = 20000 - 31500 + code * 500;
+			break;
+		}
+
 		/* Values in dB */
-		code = code * 253 + 4500;
-		*val = code / 1000;
-		*val2 = (code % 1000) * 1000;
+		*val = gain / 1000;
+		*val2 = (gain % 1000) * 1000;
 
 		ret = IIO_VAL_INT_PLUS_MICRO_DB;
 		break;
 	default:
 		ret = -EINVAL;
 	}
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return ret;
 };
@@ -85,21 +141,32 @@ static int ad8366_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct ad8366_state *st = iio_priv(indio_dev);
-	unsigned code;
+	struct ad8366_info *inf = st->info;
+	int code = 0, gain;
 	int ret;
 
-	if (val < 0 || val2 < 0)
-		return -EINVAL;
-
 	/* Values in dB */
-	code = (((u8)val * 1000) + ((u32)val2 / 1000));
+	if (val < 0)
+		gain = (val * 1000) - (val2 / 1000);
+	else
+		gain = (val * 1000) + (val2 / 1000);
 
-	if (code > 20500 || code < 4500)
+	if (gain > inf->gain_max || gain < inf->gain_min)
 		return -EINVAL;
 
-	code = (code - 4500) / 253;
+	switch (st->type) {
+	case ID_AD8366:
+		code = (gain - 4500) / 253;
+		break;
+	case ID_ADA4961:
+		code = (15000 - gain) / 1000;
+		break;
+	case ID_ADL5240:
+		code = ((gain - 500 - 20000) / 500) & 0x3F;
+		break;
+	}
 
-	mutex_lock(&indio_dev->mlock);
+	mutex_lock(&st->lock);
 	switch (mask) {
 	case IIO_CHAN_INFO_HARDWAREGAIN:
 		st->ch[chan->channel] = code;
@@ -108,7 +175,7 @@ static int ad8366_write_raw(struct iio_dev *indio_dev,
 	default:
 		ret = -EINVAL;
 	}
-	mutex_unlock(&indio_dev->mlock);
+	mutex_unlock(&st->lock);
 
 	return ret;
 }
@@ -131,6 +198,10 @@ static const struct iio_chan_spec ad8366_channels[] = {
 	AD8366_CHAN(1),
 };
 
+static const struct iio_chan_spec ada4961_channels[] = {
+	AD8366_CHAN(0),
+};
+
 static int ad8366_probe(struct spi_device *spi)
 {
 	struct iio_dev *indio_dev;
@@ -151,14 +222,33 @@ static int ad8366_probe(struct spi_device *spi)
 	}
 
 	spi_set_drvdata(spi, indio_dev);
+	mutex_init(&st->lock);
 	st->spi = spi;
+	st->type = spi_get_device_id(spi)->driver_data;
+
+	switch (st->type) {
+	case ID_AD8366:
+		indio_dev->channels = ad8366_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
+		break;
+	case ID_ADA4961:
+	case ID_ADL5240:
+		st->reset_gpio = devm_gpiod_get(&spi->dev, "reset",
+			GPIOD_OUT_HIGH);
+		indio_dev->channels = ada4961_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ada4961_channels);
+		break;
+	default:
+		dev_err(&spi->dev, "Invalid device ID\n");
+		ret = -EINVAL;
+		goto error_disable_reg;
+	}
 
+	st->info = &ad8366_infos[st->type];
 	indio_dev->dev.parent = &spi->dev;
 	indio_dev->name = spi_get_device_id(spi)->name;
 	indio_dev->info = &ad8366_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	indio_dev->channels = ad8366_channels;
-	indio_dev->num_channels = ARRAY_SIZE(ad8366_channels);
 
 	ret = ad8366_write(indio_dev, 0 , 0);
 	if (ret < 0)
@@ -192,7 +282,9 @@ static int ad8366_remove(struct spi_device *spi)
 }
 
 static const struct spi_device_id ad8366_id[] = {
-	{"ad8366", 0},
+	{"ad8366",  ID_AD8366},
+	{"ada4961", ID_ADA4961},
+	{"adl5240", ID_ADL5240},
 	{}
 };
 MODULE_DEVICE_TABLE(spi, ad8366_id);
@@ -209,5 +301,5 @@ static struct spi_driver ad8366_driver = {
 module_spi_driver(ad8366_driver);
 
 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("Analog Devices AD8366 VGA");
+MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers");
 MODULE_LICENSE("GPL v2");

drivers/iio/frequency/Kconfig

@@ -39,5 +39,15 @@ config ADF4350
 	  To compile this driver as a module, choose M here: the
 	  module will be called adf4350.
 
+config ADF4371
+	tristate "Analog Devices ADF4371/ADF4372 Wideband Synthesizers"
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for Analog Devices ADF4371 and ADF4372
+	  Wideband Synthesizers. The driver provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adf4371.
 endmenu
 endmenu

drivers/iio/frequency/Makefile

@@ -6,3 +6,4 @@
 # When adding new entries keep the list in alphabetical order
 obj-$(CONFIG_AD9523) += ad9523.o
 obj-$(CONFIG_ADF4350) += adf4350.o
+obj-$(CONFIG_ADF4371) += adf4371.o

drivers/iio/humidity/dht11.c

@@ -22,8 +22,7 @@
 #include <linux/completion.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/timekeeping.h>
 
 #include <linux/iio/iio.h>
@@ -72,7 +71,7 @@
 struct dht11 {
 	struct device			*dev;
 
-	int				gpio;
+	struct gpio_desc		*gpiod;
 	int				irq;
 
 	struct completion		completion;
@@ -179,7 +178,7 @@ static irqreturn_t dht11_handle_irq(int irq, void *data)
 	if (dht11->num_edges < DHT11_EDGES_PER_READ && dht11->num_edges >= 0) {
 		dht11->edges[dht11->num_edges].ts = ktime_get_boot_ns();
 		dht11->edges[dht11->num_edges++].value =
-						gpio_get_value(dht11->gpio);
+						gpiod_get_value(dht11->gpiod);
 
 		if (dht11->num_edges >= DHT11_EDGES_PER_READ)
 			complete(&dht11->completion);
@@ -217,12 +216,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev,
 		reinit_completion(&dht11->completion);
 
 		dht11->num_edges = 0;
-		ret = gpio_direction_output(dht11->gpio, 0);
+		ret = gpiod_direction_output(dht11->gpiod, 0);
 		if (ret)
 			goto err;
 		usleep_range(DHT11_START_TRANSMISSION_MIN,
 			     DHT11_START_TRANSMISSION_MAX);
-		ret = gpio_direction_input(dht11->gpio);
+		ret = gpiod_direction_input(dht11->gpiod);
 		if (ret)
 			goto err;
 
@@ -294,10 +293,8 @@ MODULE_DEVICE_TABLE(of, dht11_dt_ids);
 static int dht11_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *node = dev->of_node;
 	struct dht11 *dht11;
 	struct iio_dev *iio;
-	int ret;
 
 	iio = devm_iio_device_alloc(dev, sizeof(*dht11));
 	if (!iio) {
@@ -307,18 +304,13 @@ static int dht11_probe(struct platform_device *pdev)
 
 	dht11 = iio_priv(iio);
 	dht11->dev = dev;
+	dht11->gpiod = devm_gpiod_get(dev, NULL, GPIOD_IN);
+	if (IS_ERR(dht11->gpiod))
+		return PTR_ERR(dht11->gpiod);
 
-	ret = of_get_gpio(node, 0);
-	if (ret < 0)
-		return ret;
-	dht11->gpio = ret;
-	ret = devm_gpio_request_one(dev, dht11->gpio, GPIOF_IN, pdev->name);
-	if (ret)
-		return ret;
-
-	dht11->irq = gpio_to_irq(dht11->gpio);
+	dht11->irq = gpiod_to_irq(dht11->gpiod);
 	if (dht11->irq < 0) {
-		dev_err(dev, "GPIO %d has no interrupt\n", dht11->gpio);
+		dev_err(dev, "GPIO %d has no interrupt\n", desc_to_gpio(dht11->gpiod));
 		return -EINVAL;
 	}
 

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -197,7 +197,7 @@ struct st_lsm6dsx_ext_dev_settings {
  * struct st_lsm6dsx_settings - ST IMU sensor settings
  * @wai: Sensor WhoAmI default value.
  * @max_fifo_size: Sensor max fifo length in FIFO words.
- * @id: List of hw id supported by the driver configuration.
+ * @id: List of hw id/device name supported by the driver configuration.
  * @decimator: List of decimator register info (addr + mask).
  * @batch: List of FIFO batching register info (addr + mask).
  * @fifo_ops: Sensor hw FIFO parameters.
@@ -207,7 +207,10 @@ struct st_lsm6dsx_ext_dev_settings {
 struct st_lsm6dsx_settings {
 	u8 wai;
 	u16 max_fifo_size;
-	enum st_lsm6dsx_hw_id id[ST_LSM6DSX_MAX_ID];
+	struct {
+		enum st_lsm6dsx_hw_id hw_id;
+		const char *name;
+	} id[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
 	struct st_lsm6dsx_fifo_ops fifo_ops;
@@ -303,7 +306,7 @@ struct st_lsm6dsx_hw {
 static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
 extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
 
-int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 		     struct regmap *regmap);
 int st_lsm6dsx_sensor_set_enable(struct st_lsm6dsx_sensor *sensor,
 				 bool enable);

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

@@ -124,7 +124,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x69,
 		.max_fifo_size = 1365,
 		.id = {
-			[0] = ST_LSM6DS3_ID,
+			{
+				.hw_id = ST_LSM6DS3_ID,
+				.name = ST_LSM6DS3_DEV_NAME,
+			},
 		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
@@ -171,7 +174,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x69,
 		.max_fifo_size = 682,
 		.id = {
-			[0] = ST_LSM6DS3H_ID,
+			{
+				.hw_id = ST_LSM6DS3H_ID,
+				.name = ST_LSM6DS3H_DEV_NAME,
+			},
 		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
@@ -218,9 +224,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x6a,
 		.max_fifo_size = 682,
 		.id = {
-			[0] = ST_LSM6DSL_ID,
-			[1] = ST_LSM6DSM_ID,
-			[2] = ST_ISM330DLC_ID,
+			{
+				.hw_id = ST_LSM6DSL_ID,
+				.name = ST_LSM6DSL_DEV_NAME,
+			}, {
+				.hw_id = ST_LSM6DSM_ID,
+				.name = ST_LSM6DSM_DEV_NAME,
+			}, {
+				.hw_id = ST_ISM330DLC_ID,
+				.name = ST_ISM330DLC_DEV_NAME,
+			},
 		},
 		.decimator = {
 			[ST_LSM6DSX_ID_ACC] = {
@@ -267,8 +280,13 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x6c,
 		.max_fifo_size = 512,
 		.id = {
-			[0] = ST_LSM6DSO_ID,
-			[1] = ST_LSM6DSOX_ID,
+			{
+				.hw_id = ST_LSM6DSO_ID,
+				.name = ST_LSM6DSO_DEV_NAME,
+			}, {
+				.hw_id = ST_LSM6DSOX_ID,
+				.name = ST_LSM6DSOX_DEV_NAME,
+			},
 		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
@@ -333,7 +351,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x6b,
 		.max_fifo_size = 512,
 		.id = {
-			[0] = ST_ASM330LHH_ID,
+			{
+				.hw_id = ST_ASM330LHH_ID,
+				.name = ST_ASM330LHH_DEV_NAME,
+			},
 		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
@@ -372,7 +393,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 		.wai = 0x6b,
 		.max_fifo_size = 512,
 		.id = {
-			[0] = ST_LSM6DSR_ID,
+			{
+				.hw_id = ST_LSM6DSR_ID,
+				.name = ST_LSM6DSR_DEV_NAME,
+			},
 		},
 		.batch = {
 			[ST_LSM6DSX_ID_ACC] = {
@@ -470,13 +494,14 @@ int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
 	return err;
 }
 
-static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id)
+static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
+				   const char **name)
 {
 	int err, i, j, data;
 
 	for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) {
 		for (j = 0; j < ST_LSM6DSX_MAX_ID; j++) {
-			if (id == st_lsm6dsx_sensor_settings[i].id[j])
+			if (id == st_lsm6dsx_sensor_settings[i].id[j].hw_id)
 				break;
 		}
 		if (j < ST_LSM6DSX_MAX_ID)
@@ -499,6 +524,7 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id)
 		return -ENODEV;
 	}
 
+	*name = st_lsm6dsx_sensor_settings[i].id[j].name;
 	hw->settings = &st_lsm6dsx_sensor_settings[i];
 
 	return 0;
@@ -1040,11 +1066,12 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	return iio_dev;
 }
 
-int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 		     struct regmap *regmap)
 {
 	const struct st_lsm6dsx_shub_settings *hub_settings;
 	struct st_lsm6dsx_hw *hw;
+	const char *name = NULL;
 	int i, err;
 
 	hw = devm_kzalloc(dev, sizeof(*hw), GFP_KERNEL);
@@ -1065,7 +1092,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id, const char *name,
 	hw->irq = irq;
 	hw->regmap = regmap;
 
-	err = st_lsm6dsx_check_whoami(hw, hw_id);
+	err = st_lsm6dsx_check_whoami(hw, hw_id, &name);
 	if (err < 0)
 		return err;
 

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c

@@ -35,8 +35,7 @@ static int st_lsm6dsx_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(regmap);
 	}
 
-	return st_lsm6dsx_probe(&client->dev, client->irq,
-				hw_id, id->name, regmap);
+	return st_lsm6dsx_probe(&client->dev, client->irq, hw_id, regmap);
 }
 
 static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c

@@ -35,8 +35,7 @@ static int st_lsm6dsx_spi_probe(struct spi_device *spi)
 		return PTR_ERR(regmap);
 	}
 
-	return st_lsm6dsx_probe(&spi->dev, spi->irq,
-				hw_id, id->name, regmap);
+	return st_lsm6dsx_probe(&spi->dev, spi->irq, hw_id, regmap);
 }
 
 static const struct of_device_id st_lsm6dsx_spi_of_match[] = {

drivers/iio/industrialio-core.c

@@ -366,39 +366,25 @@ static void iio_device_unregister_debugfs(struct iio_dev *indio_dev)
 	debugfs_remove_recursive(indio_dev->debugfs_dentry);
 }
 
-static int iio_device_register_debugfs(struct iio_dev *indio_dev)
+static void iio_device_register_debugfs(struct iio_dev *indio_dev)
 {
-	struct dentry *d;
-
 	if (indio_dev->info->debugfs_reg_access == NULL)
-		return 0;
+		return;
 
 	if (!iio_debugfs_dentry)
-		return 0;
+		return;
 
 	indio_dev->debugfs_dentry =
 		debugfs_create_dir(dev_name(&indio_dev->dev),
 				   iio_debugfs_dentry);
-	if (indio_dev->debugfs_dentry == NULL) {
-		dev_warn(indio_dev->dev.parent,
-			 "Failed to create debugfs directory\n");
-		return -EFAULT;
-	}
-
-	d = debugfs_create_file("direct_reg_access", 0644,
-				indio_dev->debugfs_dentry,
-				indio_dev, &iio_debugfs_reg_fops);
-	if (!d) {
-		iio_device_unregister_debugfs(indio_dev);
-		return -ENOMEM;
-	}
 
-	return 0;
+	debugfs_create_file("direct_reg_access", 0644,
+			    indio_dev->debugfs_dentry, indio_dev,
+			    &iio_debugfs_reg_fops);
 }
 #else
-static int iio_device_register_debugfs(struct iio_dev *indio_dev)
+static void iio_device_register_debugfs(struct iio_dev *indio_dev)
 {
-	return 0;
 }
 
 static void iio_device_unregister_debugfs(struct iio_dev *indio_dev)
@@ -1104,6 +1090,8 @@ static int iio_device_add_info_mask_type_avail(struct iio_dev *indio_dev,
 	char *avail_postfix;
 
 	for_each_set_bit(i, infomask, sizeof(*infomask) * 8) {
+		if (i >= ARRAY_SIZE(iio_chan_info_postfix))
+			return -EINVAL;
 		avail_postfix = kasprintf(GFP_KERNEL,
 					  "%s_available",
 					  iio_chan_info_postfix[i]);
@@ -1669,12 +1657,7 @@ int __iio_device_register(struct iio_dev *indio_dev, struct module *this_mod)
 	/* configure elements for the chrdev */
 	indio_dev->dev.devt = MKDEV(MAJOR(iio_devt), indio_dev->id);
 
-	ret = iio_device_register_debugfs(indio_dev);
-	if (ret) {
-		dev_err(indio_dev->dev.parent,
-			"Failed to register debugfs interfaces\n");
-		return ret;
-	}
+	iio_device_register_debugfs(indio_dev);
 
 	ret = iio_buffer_alloc_sysfs_and_mask(indio_dev);
 	if (ret) {

drivers/iio/light/bh1780.c

@@ -146,7 +146,7 @@ static int bh1780_probe(struct i2c_client *client,
 {
 	int ret;
 	struct bh1780_data *bh1780;
-	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct i2c_adapter *adapter = client->adapter;
 	struct iio_dev *indio_dev;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))

drivers/iio/light/stk3310.c

@@ -37,6 +37,7 @@
 
 #define STK3310_CHIP_ID_VAL			0x13
 #define STK3311_CHIP_ID_VAL			0x1D
+#define STK3335_CHIP_ID_VAL			0x51
 #define STK3310_PSINT_EN			0x01
 #define STK3310_PS_MAX_VAL			0xFFFF
 
@@ -451,7 +452,8 @@ static int stk3310_init(struct iio_dev *indio_dev)
 		return ret;
 
 	if (chipid != STK3310_CHIP_ID_VAL &&
-	    chipid != STK3311_CHIP_ID_VAL) {
+	    chipid != STK3311_CHIP_ID_VAL &&
+	    chipid != STK3335_CHIP_ID_VAL) {
 		dev_err(&client->dev, "invalid chip id: 0x%x\n", chipid);
 		return -ENODEV;
 	}
@@ -663,6 +665,7 @@ static SIMPLE_DEV_PM_OPS(stk3310_pm_ops, stk3310_suspend, stk3310_resume);
 static const struct i2c_device_id stk3310_i2c_id[] = {
 	{"STK3310", 0},
 	{"STK3311", 0},
+	{"STK3335", 0},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, stk3310_i2c_id);
@@ -670,6 +673,7 @@ MODULE_DEVICE_TABLE(i2c, stk3310_i2c_id);
 static const struct acpi_device_id stk3310_acpi_id[] = {
 	{"STK3310", 0},
 	{"STK3311", 0},
+	{"STK3335", 0},
 	{}
 };
 

drivers/iio/pressure/Kconfig

@@ -53,6 +53,17 @@ config IIO_CROS_EC_BARO
 	  To compile this driver as a module, choose M here: the module
 	  will be called cros_ec_baro.
 
+config DPS310
+	tristate "Infineon DPS310 pressure and temperature sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Support for the Infineon DPS310 digital barometric pressure sensor.
+	  It can be accessed over I2C bus.
+
+	  This driver can also be built as a module.  If so, the module will be
+	  called dps310.
+
 config HID_SENSOR_PRESS
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER

drivers/iio/pressure/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_BMP280) += bmp280.o
 bmp280-objs := bmp280-core.o bmp280-regmap.o
 obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
 obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
+obj-$(CONFIG_DPS310) += dps310.o
 obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
 obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
 obj-$(CONFIG_HP03) += hp03.o

drivers/staging/iio/accel/adis16203.c

@@ -122,7 +122,7 @@
 /* Power supply above 3.625 V */
 #define ADIS16203_DIAG_STAT_POWER_HIGH_BIT    1
 
-/* Power supply below 3.15 V */
+/* Power supply below 2.975 V */
 #define ADIS16203_DIAG_STAT_POWER_LOW_BIT     0
 
 /* GLOB_CMD */
@@ -234,7 +234,7 @@ static const char * const adis16203_status_error_msgs[] = {
 	[ADIS16203_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
 	[ADIS16203_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
 	[ADIS16203_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
-	[ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
+	[ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
 };
 
 static const struct adis_data adis16203_data = {
@@ -311,9 +311,17 @@ static int adis16203_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id adis16203_of_match[] = {
+	{ .compatible = "adi,adis16203" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, adis16203_of_match);
+
 static struct spi_driver adis16203_driver = {
 	.driver = {
 		.name = "adis16203",
+		.of_match_table = adis16203_of_match,
 	},
 	.probe = adis16203_probe,
 	.remove = adis16203_remove,

drivers/staging/iio/accel/adis16240.c

@@ -175,7 +175,7 @@
 /* Power supply above 3.625 V */
 #define ADIS16240_DIAG_STAT_POWER_HIGH_BIT	1
 
- /* Power supply below 3.15 V */
+ /* Power supply below 2.225 V */
 #define ADIS16240_DIAG_STAT_POWER_LOW_BIT	0
 
 /* GLOB_CMD */
@@ -435,9 +435,16 @@ static int adis16240_remove(struct spi_device *spi)
 	return 0;
 }
 
+static const struct of_device_id adis16240_of_match[] = {
+	{ .compatible = "adi,adis16240" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, adis16240_of_match);
+
 static struct spi_driver adis16240_driver = {
 	.driver = {
 		.name = "adis16240",
+		.of_match_table = adis16240_of_match,
 	},
 	.probe = adis16240_probe,
 	.remove = adis16240_remove,

drivers/staging/iio/addac/adt7316-spi.c

@@ -126,9 +126,22 @@ static const struct spi_device_id adt7316_spi_id[] = {
 
 MODULE_DEVICE_TABLE(spi, adt7316_spi_id);
 
+static const struct of_device_id adt7316_of_spi_match[] = {
+	{ .compatible = "adi,adt7316" },
+	{ .compatible = "adi,adt7317" },
+	{ .compatible = "adi,adt7318" },
+	{ .compatible = "adi,adt7516" },
+	{ .compatible = "adi,adt7517" },
+	{ .compatible = "adi,adt7519" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, adt7316_of_spi_match);
+
 static struct spi_driver adt7316_driver = {
 	.driver = {
 		.name = "adt7316",
+		.of_match_table = adt7316_of_spi_match,
 		.pm = ADT7316_PM_OPS,
 	},
 	.probe = adt7316_spi_probe,

drivers/staging/iio/cdc/ad7150.c

@@ -46,6 +46,9 @@
 #define AD7150_SN0                 22
 #define AD7150_ID                  23
 
+/* AD7150 masks */
+#define AD7150_THRESHTYPE_MSK			GENMASK(6, 5)
+
 /**
  * struct ad7150_chip_info - instance specific chip data
  * @client: i2c client for this device
@@ -138,7 +141,7 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 	if (ret < 0)
 		return ret;
 
-	threshtype = (ret >> 5) & 0x03;
+	threshtype = FIELD_GET(AD7150_THRESHTYPE_MSK, ret);
 
 	/*check if threshold mode is fixed or adaptive*/
 	thrfixed = FIELD_GET(AD7150_CFG_FIX, ret);
@@ -162,7 +165,8 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev,
 	return -EINVAL;
 }
 
-/* lock should be held */
+/* state_lock should be held to ensure consistent state*/
+
 static int ad7150_write_event_params(struct iio_dev *indio_dev,
 				     unsigned int chan,
 				     enum iio_event_type type,
@@ -201,16 +205,11 @@ static int ad7150_write_event_params(struct iio_dev *indio_dev,
 	ret = i2c_smbus_write_byte_data(chip->client,
 					ad7150_addresses[chan][4],
 					sens);
-	if (ret < 0)
+	if (ret)
 		return ret;
-
-	ret = i2c_smbus_write_byte_data(chip->client,
+	return i2c_smbus_write_byte_data(chip->client,
 					ad7150_addresses[chan][5],
 					timeout);
-	if (ret < 0)
-		return ret;
-
-	return 0;
 }
 
 static int ad7150_write_event_config(struct iio_dev *indio_dev,
@@ -353,8 +352,8 @@ static ssize_t ad7150_show_timeout(struct device *dev,
 
 	/* use the event code for consistency reasons */
 	int chan = IIO_EVENT_CODE_EXTRACT_CHAN(this_attr->address);
-	int rising = !!(IIO_EVENT_CODE_EXTRACT_DIR(this_attr->address)
-			== IIO_EV_DIR_RISING);
+	int rising = (IIO_EVENT_CODE_EXTRACT_DIR(this_attr->address)
+		      == IIO_EV_DIR_RISING) ? 1 : 0;
 
 	switch (IIO_EVENT_CODE_EXTRACT_TYPE(this_attr->address)) {
 	case IIO_EV_TYPE_MAG_ADAPTIVE:
@@ -468,30 +467,21 @@ static const struct iio_event_spec ad7150_events[] = {
 	},
 };
 
+#define AD7150_CAPACITANCE_CHAN(_chan)	{			\
+		.type = IIO_CAPACITANCE,			\
+		.indexed = 1,					\
+		.channel = _chan,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
+		BIT(IIO_CHAN_INFO_AVERAGE_RAW),			\
+		.event_spec = ad7150_events,			\
+		.num_event_specs = ARRAY_SIZE(ad7150_events),	\
+	}
+
 static const struct iio_chan_spec ad7150_channels[] = {
-	{
-		.type = IIO_CAPACITANCE,
-		.indexed = 1,
-		.channel = 0,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_AVERAGE_RAW),
-		.event_spec = ad7150_events,
-		.num_event_specs = ARRAY_SIZE(ad7150_events),
-	}, {
-		.type = IIO_CAPACITANCE,
-		.indexed = 1,
-		.channel = 1,
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_AVERAGE_RAW),
-		.event_spec = ad7150_events,
-		.num_event_specs = ARRAY_SIZE(ad7150_events),
-	},
+	AD7150_CAPACITANCE_CHAN(0),
+	AD7150_CAPACITANCE_CHAN(1)
 };
 
-/*
- * threshold events
- */
-
 static irqreturn_t ad7150_event_handler(int irq, void *private)
 {
 	struct iio_dev *indio_dev = private;
@@ -580,10 +570,6 @@ static const struct iio_info ad7150_info = {
 	.write_event_value = &ad7150_write_event_value,
 };
 
-/*
- * device probe and remove
- */
-
 static int ad7150_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {

drivers/staging/iio/cdc/ad7746.c

@@ -748,9 +748,19 @@ static const struct i2c_device_id ad7746_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, ad7746_id);
 
+static const struct of_device_id ad7746_of_match[] = {
+	{ .compatible = "adi,ad7745" },
+	{ .compatible = "adi,ad7746" },
+	{ .compatible = "adi,ad7747" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, ad7746_of_match);
+
 static struct i2c_driver ad7746_driver = {
 	.driver = {
 		.name = KBUILD_MODNAME,
+		.of_match_table = ad7746_of_match,
 	},
 	.probe = ad7746_probe,
 	.id_table = ad7746_id,

drivers/staging/iio/frequency/ad9834.c

@@ -521,9 +521,20 @@ static const struct spi_device_id ad9834_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, ad9834_id);
 
+static const struct of_device_id ad9834_of_match[] = {
+	{.compatible = "adi,ad9833"},
+	{.compatible = "adi,ad9834"},
+	{.compatible = "adi,ad9837"},
+	{.compatible = "adi,ad9838"},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ad9834_of_match);
+
 static struct spi_driver ad9834_driver = {
 	.driver = {
 		.name	= "ad9834",
+		.of_match_table = ad9834_of_match
 	},
 	.probe		= ad9834_probe,
 	.remove		= ad9834_remove,

drivers/staging/iio/resolver/ad2s1210.c

@@ -647,9 +647,6 @@ static int ad2s1210_probe(struct spi_device *spi)
 	struct ad2s1210_state *st;
 	int ret;
 
-	if (!spi->dev.platform_data)
-		return -EINVAL;
-
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;

tools/iio/iio_utils.c

@@ -156,9 +156,9 @@ int iioutils_get_type(unsigned *is_signed, unsigned *bytes, unsigned *bits_used,
 			*be = (endianchar == 'b');
 			*bytes = padint / 8;
 			if (*bits_used == 64)
-				*mask = ~0;
+				*mask = ~(0ULL);
 			else
-				*mask = (1ULL << *bits_used) - 1;
+				*mask = (1ULL << *bits_used) - 1ULL;
 
 			*is_signed = (signchar == 's');
 			if (fclose(sysfsfp)) {