genirq: Fix various typos in comments

Go over the IRQ subsystem source code (including irqchip drivers) and
fix common typos in comments.

No change in functionality intended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org

drivers/irqchip/irq-dw-apb-ictl.c

@@ -105,7 +105,7 @@ static int __init dw_apb_ictl_init(struct device_node *np,
 	 * DW IP can be configured to allow 2-64 irqs. We can determine
 	 * the number of irqs supported by writing into enable register
 	 * and look for bits not set, as corresponding flip-flops will
-	 * have been removed by sythesis tool.
+	 * have been removed by synthesis tool.
 	 */
 
 	/* mask and enable all interrupts */

drivers/irqchip/irq-gic.c

@@ -604,8 +604,8 @@ void gic_dist_save(struct gic_chip_data *gic)
 /*
  * Restores the GIC distributor registers during resume or when coming out of
  * idle.  Must be called before enabling interrupts.  If a level interrupt
- * that occured while the GIC was suspended is still present, it will be
- * handled normally, but any edge interrupts that occured will not be seen by
+ * that occurred while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occurred will not be seen by
  * the GIC and need to be handled by the platform-specific wakeup source.
  */
 void gic_dist_restore(struct gic_chip_data *gic)
@@ -899,7 +899,7 @@ void gic_migrate_target(unsigned int new_cpu_id)
 	gic_cpu_map[cpu] = 1 << new_cpu_id;
 
 	/*
-	 * Find all the peripheral interrupts targetting the current
+	 * Find all the peripheral interrupts targeting the current
 	 * CPU interface and migrate them to the new CPU interface.
 	 * We skip DIST_TARGET 0 to 7 as they are read-only.
 	 */

drivers/irqchip/irq-renesas-h8s.c

 // SPDX-License-Identifier: GPL-2.0
 /*
- * H8S interrupt contoller driver
+ * H8S interrupt controller driver
  *
  * Copyright 2015 Yoshinori Sato <ysato@users.sourceforge.jp>
  */

drivers/irqchip/irq-s3c24xx.c

@@ -58,7 +58,7 @@ struct s3c_irq_data {
 };
 
 /*
- * Sructure holding the controller data
+ * Structure holding the controller data
  * @reg_pending		register holding pending irqs
  * @reg_intpnd		special register intpnd in main intc
  * @reg_mask		mask register

include/linux/irqchip.h

@@ -19,7 +19,7 @@
  * the association between their DT compatible string and their
  * initialization function.
  *
- * @name: name that must be unique accross all IRQCHIP_DECLARE of the
+ * @name: name that must be unique across all IRQCHIP_DECLARE of the
  * same file.
  * @compstr: compatible string of the irqchip driver
  * @fn: initialization function
@@ -30,7 +30,7 @@
  * This macro must be used by the different irqchip drivers to declare
  * the association between their version and their initialization function.
  *
- * @name: name that must be unique accross all IRQCHIP_ACPI_DECLARE of the
+ * @name: name that must be unique across all IRQCHIP_ACPI_DECLARE of the
  * same file.
  * @subtable: Subtable to be identified in MADT
  * @validate: Function to be called on that subtable to check its validity.

kernel/irq/chip.c

@@ -929,7 +929,7 @@ __irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle,
 				break;
 			/*
 			 * Bail out if the outer chip is not set up
-			 * and the interrrupt supposed to be started
+			 * and the interrupt supposed to be started
 			 * right away.
 			 */
 			if (WARN_ON(is_chained))

kernel/irq/ipi.c

@@ -56,7 +56,7 @@ int irq_reserve_ipi(struct irq_domain *domain,
 		unsigned int next;
 
 		/*
-		 * The IPI requires a seperate HW irq on each CPU. We require
+		 * The IPI requires a separate HW irq on each CPU. We require
 		 * that the destination mask is consecutive. If an
 		 * implementation needs to support holes, it can reserve
 		 * several IPI ranges.
@@ -172,7 +172,7 @@ irq_hw_number_t ipi_get_hwirq(unsigned int irq, unsigned int cpu)
 
 	/*
 	 * Get the real hardware irq number if the underlying implementation
-	 * uses a seperate irq per cpu. If the underlying implementation uses
+	 * uses a separate irq per cpu. If the underlying implementation uses
 	 * a single hardware irq for all cpus then the IPI send mechanism
 	 * needs to take care of the cpu destinations.
 	 */

kernel/irq/manage.c

@@ -915,7 +915,7 @@ irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
 #endif
 
 /*
- * Interrupts which are not explicitely requested as threaded
+ * Interrupts which are not explicitly requested as threaded
  * interrupts rely on the implicit bh/preempt disable of the hard irq
  * context. So we need to disable bh here to avoid deadlocks and other
  * side effects.

kernel/irq/spurious.c

@@ -66,7 +66,7 @@ static int try_one_irq(struct irq_desc *desc, bool force)
 	raw_spin_lock(&desc->lock);
 
 	/*
-	 * PER_CPU, nested thread interrupts and interrupts explicitely
+	 * PER_CPU, nested thread interrupts and interrupts explicitly
 	 * marked polled are excluded from polling.
 	 */
 	if (irq_settings_is_per_cpu(desc) ||
@@ -76,7 +76,7 @@ static int try_one_irq(struct irq_desc *desc, bool force)
 
 	/*
 	 * Do not poll disabled interrupts unless the spurious
-	 * disabled poller asks explicitely.
+	 * disabled poller asks explicitly.
 	 */
 	if (irqd_irq_disabled(&desc->irq_data) && !force)
 		goto out;
@@ -292,7 +292,7 @@ void note_interrupt(struct irq_desc *desc, irqreturn_t action_ret)
 	 * So in case a thread is woken, we just note the fact and
 	 * defer the analysis to the next hardware interrupt.
 	 *
-	 * The threaded handlers store whether they sucessfully
+	 * The threaded handlers store whether they successfully
 	 * handled an interrupt and we check whether that number
 	 * changed versus the last invocation.
 	 *