IB/hfi1: Add support for extended memory management

Advertise and add the capability of handing all aspects of IBTA extended
memory management support in post send.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

drivers/infiniband/hw/hfi1/qp.c

@@ -157,6 +157,23 @@ const struct rvt_operation_params hfi1_post_parms[RVT_OPERATION_MAX] = {
 		       BIT(IB_QPT_UC) | BIT(IB_QPT_RC),
 },
 
+[IB_WR_REG_MR] = {
+	.length = sizeof(struct ib_reg_wr),
+	.qpt_support = BIT(IB_QPT_UC) | BIT(IB_QPT_RC),
+	.flags = RVT_OPERATION_LOCAL,
+},
+
+[IB_WR_LOCAL_INV] = {
+	.length = sizeof(struct ib_send_wr),
+	.qpt_support = BIT(IB_QPT_UC) | BIT(IB_QPT_RC),
+	.flags = RVT_OPERATION_LOCAL,
+},
+
+[IB_WR_SEND_WITH_INV] = {
+	.length = sizeof(struct ib_send_wr),
+	.qpt_support = BIT(IB_QPT_RC),
+},
+
 };
 
 static void flush_tx_list(struct rvt_qp *qp)

drivers/infiniband/hw/hfi1/verbs.c

@@ -1305,13 +1305,15 @@ static void hfi1_fill_device_attr(struct hfi1_devdata *dd)
 	rdi->dparms.props.device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
 			IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
 			IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
-			IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
+			IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE |
+			IB_DEVICE_MEM_MGT_EXTENSIONS;
 	rdi->dparms.props.page_size_cap = PAGE_SIZE;
 	rdi->dparms.props.vendor_id = dd->oui1 << 16 | dd->oui2 << 8 | dd->oui3;
 	rdi->dparms.props.vendor_part_id = dd->pcidev->device;
 	rdi->dparms.props.hw_ver = dd->minrev;
 	rdi->dparms.props.sys_image_guid = ib_hfi1_sys_image_guid;
-	rdi->dparms.props.max_mr_size = ~0ULL;
+	rdi->dparms.props.max_mr_size = U64_MAX;
+	rdi->dparms.props.max_fast_reg_page_list_len = UINT_MAX;
 	rdi->dparms.props.max_qp = hfi1_max_qps;
 	rdi->dparms.props.max_qp_wr = hfi1_max_qp_wrs;
 	rdi->dparms.props.max_sge = hfi1_max_sges;