update rfc1001 handling

fs/cifs/CHANGES

 Version 1.11
 ------------
 Better port 139 support to Windows servers (RFC1001/RFC1002 Session_Initialize) also
-now allowing support for specifying client netbiosname.
+now allowing support for specifying client netbiosname.  NT4 support added.
 
 Version 1.10
 ------------

fs/cifs/README

@@ -148,8 +148,8 @@ If no password is provided, mount.cifs will prompt for password entry
 Restrictions
 ============
 Servers must support the NTLM SMB dialect (which is the most recent, supported 
-by Samba and Windows NT, 2000 and XP and many other SMB/CIFS servers) and 
-servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC 
+by Samba and Windows NT version 4, 2000 and XP and many other SMB/CIFS servers) 
+Servers must support either "pure-TCP" (port 445 TCP/IP CIFS connections) or RFC 
 1001/1002 support for "Netbios-Over-TCP/IP." Neither of these is likely to be a 
 problem as most servers support this.  IPv6 support is planned for the future.  
 
@@ -275,6 +275,15 @@ tracing to the kernel message log type:
 and for more extensive tracing including the start of smb requests and responses
 
 	echo 1 > /proc/fs/cifs/traceSMB
+
+Three other experimental features are under development and to test 
+require enabling an ifdef (e.g. by  adding "#define CIFS_FCNTL" in cifsglob.h)
+
+	CIFS_QUOTA
+
+	CIFS_XATTR
+
+	CIFS_FCNTL  (fcntl needed for support of directory change notification)
 	
 Also note that "cat /proc/fs/cifs/DebugData" will display some information about 
 the active sessions and the shares that are mounted.  Note: NTLMv2 enablement 

fs/cifs/TODO

@@ -65,14 +65,27 @@ but recognizes them
 3) create of new files to FAT partitions on Windows servers can
 succeed but still return access denied (appears to be Windows 
 not client problem).  NTFS partitions do not have this problem.
+4) debug connectathon special test case nfs_idem (which does
+some invalid symlink naming, or at least what Samba thinks
+is an invalid symlink target).
+5) debug connectation lock test case 10 which fails against
+Samba (may be unmappable due to POSIX to Windows lock model
+differences but worth investigating).  Also debug Samba to 
+see why lock test case 7 takes longer to complete to Samba
+than to Windows.
 
 Misc testing to do
 =================
 1) check out max path names and max path name components against various server
 types.
 
-2) Run dbench. Modify file portion of ltp so it can run against a mounted network
+2) Modify file portion of ltp so it can run against a mounted network
 share and run it against cifs vfs.
 
-3) Additional performance testing and optimization using iozone and similar tools.
+3) Additional performance testing and optimization using iozone and similar - 
+there are some easy changes that can be done to parallelize sequential writes,
+and when signing is disabled to request larger read sizes (larger than 
+negotiated size) and send larger write sizes to modern servers.
+
+4) More exhaustively test the recently added NT4 support
 

fs/cifs/cifsfs.c

@@ -672,8 +672,10 @@ static int cifs_oplock_thread(void * dummyarg)
 				/* down(&inode->i_sem);*/
 				if (S_ISREG(inode->i_mode)) {
 					rc = filemap_fdatawrite(inode->i_mapping);
-					if(CIFS_I(inode)->clientCanCacheRead == 0)
+					if(CIFS_I(inode)->clientCanCacheRead == 0) {
+						filemap_fdatawait(inode->i_mapping);
 						invalidate_remote_inode(inode);
+					}
 				} else
 					rc = 0;
 				/* up(&inode->i_sem);*/
@@ -772,6 +774,6 @@ exit_cifs(void)
 MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
 MODULE_LICENSE("GPL");		/* combination of LGPL + GPL source behaves as GPL */
 MODULE_DESCRIPTION
-    ("VFS to access servers complying with the SNIA CIFS Specification e.g. Samba and Windows");
+    ("VFS to access servers complying with the SNIA CIFS Specification e.g. Samba and Windows Revision: 1.11");
 module_init(init_cifs)
 module_exit(exit_cifs)

fs/cifs/cifsglob.h

@@ -139,6 +139,7 @@ struct TCP_Server_Info {
 	int capabilities; /* allow selective disabling of caps by smb sess */
 	__u16 timeZone;
 	char cryptKey[CIFS_CRYPTO_KEY_SIZE];
+	char workstation_RFC1001_name[16]; /* 16th byte is always zero */
 };
 
 /*
@@ -174,7 +175,6 @@ struct cifsSesInfo {
 	uid_t linux_uid;        /* local Linux uid */
 	int capabilities;
 	char serverName[SERVER_NAME_LEN_WITH_NULL * 2];	/* BB make bigger for tcp names - will ipv6 and sctp addresses fit here?? */
-	char workstation_RFC1001_name[15]; /* 16th byte is always zero */
 	char userName[MAX_USERNAME_SIZE + 1];
 	char domainName[MAX_USERNAME_SIZE + 1];
 	char * password;