Merge tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "This last cycle, Thor was busy adding Arria10 eth FIFO support to the
  altera_edac driver along with other improvements.  We have two
  cleanups/fixes too.

  Summary:

   - Altera Arria10 ethernet FIFO buffer support (Thor Thayer)

   - Minor cleanups"

* tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
  EDAC, altera: Add Arria10 Ethernet EDAC support
  EDAC, altera: Add Arria10 ECC memory init functions
  Documentation: dt: socfpga: Add Arria10 Ethernet binding
  EDAC, altera: Drop some ifdeffery
  EDAC, altera: Add panic flag check to A10 IRQ
  EDAC, altera: Check parent status for Arria10 EDAC block
  EDAC, altera: Make all private data structures static
  EDAC: Correct channel count limit
  EDAC, amd64_edac: Init opstate at the proper time during init
  EDAC, altera: Handle Arria10 SDRAM child node
  EDAC, altera: Add ECC Manager IRQ controller support
  Documentation: dt: socfpga: Add interrupt-controller to ecc-manager

Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt

@@ -61,7 +61,9 @@ Required Properties:
 - #address-cells: must be 1
 - #size-cells: must be 1
 - interrupts : Should be single bit error interrupt, then double bit error
-	interrupt. Note the rising edge type.
+	interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
 - ranges : standard definition, should translate from local addresses
 
 Subcomponents:
@@ -70,11 +72,23 @@ L2 Cache ECC
 Required Properties:
 - compatible : Should be "altr,socfpga-a10-l2-ecc"
 - reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
 
 On-Chip RAM ECC
 Required Properties:
 - compatible : Should be "altr,socfpga-a10-ocram-ecc"
 - reg        : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
 
 Example:
 
@@ -85,15 +99,37 @@ Example:
 		#size-cells = <1>;
 		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 		ranges;
 
 		l2-ecc@ffd06010 {
 			compatible = "altr,socfpga-a10-l2-ecc";
 			reg = <0xffd06010 0x4>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+				     <32 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		ocram-ecc@ff8c3000 {
 			compatible = "altr,socfpga-a10-ocram-ecc";
 			reg = <0xff8c3000 0x90>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+				     <33 IRQ_TYPE_LEVEL_HIGH> ;
+		};
+
+		emac0-rx-ecc@ff8c0800 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0800 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+				     <36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0c00 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0c00 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+				     <37 IRQ_TYPE_LEVEL_HIGH>;
 		};
 	};

arch/arm/boot/dts/socfpga_arria10.dtsi

@@ -621,6 +621,22 @@ ocram-ecc@ff8c3000 {
 				compatible = "altr,socfpga-a10-ocram-ecc";
 				reg = <0xff8c3000 0x400>;
 			};
+
+			emac0-rx-ecc@ff8c0800 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0800 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+					     <36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			emac0-tx-ecc@ff8c0c00 {
+				compatible = "altr,socfpga-eth-mac-ecc";
+				reg = <0xff8c0c00 0x400>;
+				altr,ecc-parent = <&gmac0>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+					     <37 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
 		rst: rstmgr@ffd05000 {

drivers/edac/Kconfig

@@ -391,6 +391,13 @@ config EDAC_ALTERA_OCRAM
 	  Support for error detection and correction on the
 	  Altera On-Chip RAM Memory for Altera SoCs.
 
+config EDAC_ALTERA_ETHERNET
+	bool "Altera Ethernet FIFO ECC"
+	depends on EDAC_ALTERA=y
+	help
+	  Support for error detection and correction on the
+	  Altera Ethernet FIFO Memory for Altera SoCs.
+
 config EDAC_SYNOPSYS
 	tristate "Synopsys DDR Memory Controller"
 	depends on EDAC_MM_EDAC && ARCH_ZYNQ

drivers/edac/altera_edac.h

@@ -230,8 +230,13 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_ECC_INITCOMPLETEB      BIT(8)
 
 #define ALTR_A10_ECC_ERRINTEN_OFST      0x10
+#define ALTR_A10_ECC_ERRINTENS_OFST     0x14
+#define ALTR_A10_ECC_ERRINTENR_OFST     0x18
 #define ALTR_A10_ECC_SERRINTEN          BIT(0)
 
+#define ALTR_A10_ECC_INTMODE_OFST       0x1C
+#define ALTR_A10_ECC_INTMODE            BIT(0)
+
 #define ALTR_A10_ECC_INTSTAT_OFST       0x20
 #define ALTR_A10_ECC_SERRPENA           BIT(0)
 #define ALTR_A10_ECC_DERRPENA           BIT(8)
@@ -280,6 +285,12 @@ struct altr_sdram_mc_data {
 /* Arria 10 OCRAM ECC Management Group Defines */
 #define ALTR_A10_OCRAM_ECC_EN_CTL       (BIT(1) | BIT(0))
 
+/* Arria 10 Ethernet ECC Management Group Defines */
+#define ALTR_A10_COMMON_ECC_EN_CTL      BIT(0)
+
+/* A10 ECC Controller memory initialization timeout */
+#define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
+
 struct altr_edac_device_dev;
 
 struct edac_device_prv_data {
@@ -295,10 +306,10 @@ struct edac_device_prv_data {
 	int ce_set_mask;
 	int ue_set_mask;
 	int set_err_ofst;
-	irqreturn_t (*ecc_irq_handler)(struct altr_edac_device_dev *dci,
-				       bool sb);
+	irqreturn_t (*ecc_irq_handler)(int irq, void *dev_id);
 	int trig_alloc_sz;
 	const struct file_operations *inject_fops;
+	bool panic;
 };
 
 struct altr_edac_device_dev {
@@ -320,6 +331,8 @@ struct altr_arria10_edac {
 	struct regmap		*ecc_mgr_map;
 	int sb_irq;
 	int db_irq;
+	struct irq_domain	*domain;
+	struct irq_chip		irq_chip;
 	struct list_head	a10_ecc_devices;
 };
 

drivers/edac/amd64_edac.c

@@ -2966,11 +2966,11 @@ static int __init amd64_edac_init(void)
 	int err = -ENODEV;
 	int i;
 
-	opstate_init();
-
 	if (amd_cache_northbridges() < 0)
 		goto err_ret;
 
+	opstate_init();
+
 	err = -ENOMEM;
 	ecc_stngs = kzalloc(amd_nb_num() * sizeof(ecc_stngs[0]), GFP_KERNEL);
 	if (!ecc_stngs)

drivers/edac/edac_mc_sysfs.c

@@ -313,7 +313,6 @@ static struct device_type csrow_attr_type = {
  * possible dynamic channel DIMM Label attribute files
  *
  */
-
 DEVICE_CHANNEL(ch0_dimm_label, S_IRUGO | S_IWUSR,
 	channel_dimm_label_show, channel_dimm_label_store, 0);
 DEVICE_CHANNEL(ch1_dimm_label, S_IRUGO | S_IWUSR,
@@ -326,6 +325,10 @@ DEVICE_CHANNEL(ch4_dimm_label, S_IRUGO | S_IWUSR,
 	channel_dimm_label_show, channel_dimm_label_store, 4);
 DEVICE_CHANNEL(ch5_dimm_label, S_IRUGO | S_IWUSR,
 	channel_dimm_label_show, channel_dimm_label_store, 5);
+DEVICE_CHANNEL(ch6_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 6);
+DEVICE_CHANNEL(ch7_dimm_label, S_IRUGO | S_IWUSR,
+	channel_dimm_label_show, channel_dimm_label_store, 7);
 
 /* Total possible dynamic DIMM Label attribute file table */
 static struct attribute *dynamic_csrow_dimm_attr[] = {
@@ -335,6 +338,8 @@ static struct attribute *dynamic_csrow_dimm_attr[] = {
 	&dev_attr_legacy_ch3_dimm_label.attr.attr,
 	&dev_attr_legacy_ch4_dimm_label.attr.attr,
 	&dev_attr_legacy_ch5_dimm_label.attr.attr,
+	&dev_attr_legacy_ch6_dimm_label.attr.attr,
+	&dev_attr_legacy_ch7_dimm_label.attr.attr,
 	NULL
 };
 
@@ -351,6 +356,10 @@ DEVICE_CHANNEL(ch4_ce_count, S_IRUGO,
 		   channel_ce_count_show, NULL, 4);
 DEVICE_CHANNEL(ch5_ce_count, S_IRUGO,
 		   channel_ce_count_show, NULL, 5);
+DEVICE_CHANNEL(ch6_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 6);
+DEVICE_CHANNEL(ch7_ce_count, S_IRUGO,
+		   channel_ce_count_show, NULL, 7);
 
 /* Total possible dynamic ce_count attribute file table */
 static struct attribute *dynamic_csrow_ce_count_attr[] = {
@@ -360,6 +369,8 @@ static struct attribute *dynamic_csrow_ce_count_attr[] = {
 	&dev_attr_legacy_ch3_ce_count.attr.attr,
 	&dev_attr_legacy_ch4_ce_count.attr.attr,
 	&dev_attr_legacy_ch5_ce_count.attr.attr,
+	&dev_attr_legacy_ch6_ce_count.attr.attr,
+	&dev_attr_legacy_ch7_ce_count.attr.attr,
 	NULL
 };
 
@@ -371,9 +382,16 @@ static umode_t csrow_dev_is_visible(struct kobject *kobj,
 
 	if (idx >= csrow->nr_channels)
 		return 0;
+
+	if (idx >= ARRAY_SIZE(dynamic_csrow_ce_count_attr) - 1) {
+		WARN_ONCE(1, "idx: %d\n", idx);
+		return 0;
+	}
+
 	/* Only expose populated DIMMs */
 	if (!csrow->channels[idx]->dimm->nr_pages)
 		return 0;
+
 	return attr->mode;
 }