Merge commit 'v2.6.26-rc8' into core/softlockup

.gitignore

@@ -26,6 +26,7 @@ tags
 TAGS
 vmlinux*
 !vmlinux.lds.S
+!vmlinux.lds.h
 System.map
 Module.markers
 Module.symvers

Documentation/DocBook/kgdb.tmpl

@@ -84,10 +84,9 @@
     runs an instance of gdb against the vmlinux file which contains
     the symbols (not boot image such as bzImage, zImage, uImage...).
     In gdb the developer specifies the connection parameters and
-    connects to kgdb.  Depending on which kgdb I/O modules exist in
-    the kernel for a given architecture, it may be possible to debug
-    the test machine's kernel with the development machine using a
-    rs232 or ethernet connection.
+    connects to kgdb.  The type of connection a developer makes with
+    gdb depends on the availability of kgdb I/O modules compiled as
+    builtin's or kernel modules in the test machine's kernel.
     </para>
   </chapter>
   <chapter id="CompilingAKernel">
@@ -223,7 +222,7 @@
   </para>
   <para>
   IMPORTANT NOTE: Using this option with kgdb over the console
-  (kgdboc) or kgdb over ethernet (kgdboe) is not supported.
+  (kgdboc) is not supported.
   </para>
   </sect1>
   </chapter>
@@ -249,18 +248,11 @@
     (gdb) target remote /dev/ttyS0
     </programlisting>
     <para>
-    Example (kgdb to a terminal server):
+    Example (kgdb to a terminal server on tcp port 2012):
     </para>
     <programlisting>
     % gdb ./vmlinux
-    (gdb) target remote udp:192.168.2.2:6443
-    </programlisting>
-    <para>
-    Example (kgdb over ethernet):
-    </para>
-    <programlisting>
-    % gdb ./vmlinux
-    (gdb) target remote udp:192.168.2.2:6443
+    (gdb) target remote 192.168.2.2:2012
     </programlisting>
     <para>
     Once connected, you can debug a kernel the way you would debug an

Documentation/cpusets.txt

@@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request.
    2  : search cores in a package.
    3  : search cpus in a node [= system wide on non-NUMA system]
  ( 4  : search nodes in a chunk of node [on NUMA system] )
- ( 5~ : search system wide [on NUMA system])
+ ( 5  : search system wide [on NUMA system] )
 
 This file is per-cpuset and affect the sched domain where the cpuset
 belongs to.  Therefore if the flag 'sched_load_balance' of a cpuset

Documentation/hwmon/sysfs-interface

@@ -2,17 +2,12 @@ Naming and data format standards for sysfs files
 ------------------------------------------------
 
 The libsensors library offers an interface to the raw sensors data
-through the sysfs interface. See libsensors documentation and source for
-further information. As of writing this document, libsensors
-(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating
-support for any given chip requires modifying the library's code.
-This is because libsensors was written for the procfs interface
-older kernel modules were using, which wasn't standardized enough.
-Recent versions of libsensors (from lm_sensors 2.8.2 and later) have
-support for the sysfs interface, though.
-
-The new sysfs interface was designed to be as chip-independent as
-possible.
+through the sysfs interface. Since lm-sensors 3.0.0, libsensors is
+completely chip-independent. It assumes that all the kernel drivers
+implement the standard sysfs interface described in this document.
+This makes adding or updating support for any given chip very easy, as
+libsensors, and applications using it, do not need to be modified.
+This is a major improvement compared to lm-sensors 2.
 
 Note that motherboards vary widely in the connections to sensor chips.
 There is no standard that ensures, for example, that the second
@@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs
 will have to implement conversion, labeling and hiding of inputs. For
 this reason, it is still not recommended to bypass the library.
 
-If you are developing a userspace application please send us feedback on
-this standard.
-
-Note that this standard isn't completely established yet, so it is subject
-to changes. If you are writing a new hardware monitoring driver those
-features can't seem to fit in this interface, please contact us with your
-extension proposal. Keep in mind that backward compatibility must be
-preserved.
-
 Each chip gets its own directory in the sysfs /sys/devices tree.  To
 find all sensor chips, it is easier to follow the device symlinks from
 /sys/class/hwmon/hwmon*.
 
+Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes
+in the "physical" device directory. Since lm-sensors 3.0.1, attributes found
+in the hwmon "class" device directory are also supported. Complex drivers
+(e.g. drivers for multifunction chips) may want to use this possibility to
+avoid namespace pollution. The only drawback will be that older versions of
+libsensors won't support the driver in question.
+
 All sysfs values are fixed point numbers.
 
 There is only one value per file, unlike the older /proc specification.

MAINTAINERS

@@ -4431,10 +4431,10 @@ M:	johnpol@2ka.mipt.ru
 S:	Maintained
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Charles Spirakis
-M:	bezaur@gmail.com
+P:	Marc Hulsman
+M:	m.hulsman@tudelft.nl
 L:	lm-sensors@lm-sensors.org
-S:	Odd Fixes
+S:	Maintained
 
 W83793 HARDWARE MONITORING DRIVER
 P:	Rudolf Marek

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 26
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc8
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*

arch/alpha/Makefile

@@ -13,6 +13,7 @@ NM := $(NM) -B
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
 cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4
 cpuflags-$(CONFIG_ALPHA_EV5)		:= -mcpu=ev5

arch/alpha/kernel/core_t2.c

@@ -74,6 +74,8 @@
 # define DBG(args)
 #endif
 
+DEFINE_SPINLOCK(t2_hae_lock);
+
 static volatile unsigned int t2_mcheck_any_expected;
 static volatile unsigned int t2_mcheck_last_taken;
 

arch/alpha/kernel/pci.c

@@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i
 static void __init
 quirk_cypress(struct pci_dev *dev)
 {
+	/* The Notorious Cy82C693 chip.  */
+
+	/* The generic legacy mode IDE fixup in drivers/pci/probe.c
+	   doesn't work correctly with the Cypress IDE controller as
+	   it has non-standard register layout.  Fix that.  */
+	if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) {
+		dev->resource[2].start = dev->resource[3].start = 0;
+		dev->resource[2].end = dev->resource[3].end = 0;
+		dev->resource[2].flags = dev->resource[3].flags = 0;
+		if (PCI_FUNC(dev->devfn) == 2) {
+			dev->resource[0].start = 0x170;
+			dev->resource[0].end = 0x177;
+			dev->resource[1].start = 0x376;
+			dev->resource[1].end = 0x376;
+		}
+	}
+
 	/* The Cypress bridge responds on the PCI bus in the address range
 	   0xffff0000-0xffffffff (conventional x86 BIOS ROM).  There is no
 	   way to turn this off.  The bridge also supports several extended

arch/alpha/kernel/traps.c

@@ -447,7 +447,7 @@ struct unaligned_stat {
 
 
 /* Macro for exception fixup code to access integer registers.  */
-#define una_reg(r)  (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
+#define una_reg(r)  (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)])
 
 
 asmlinkage void
@@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 {
 	long error, tmp1, tmp2, tmp3, tmp4;
 	unsigned long pc = regs->pc - 4;
+	unsigned long *_regs = regs->regs;
 	const struct exception_table_entry *fixup;
 
 	unaligned[0].count++;

arch/ia64/Makefile

@@ -57,6 +57,7 @@ core-$(CONFIG_IA64_GENERIC) 	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1)	+= arch/ia64/dig/
 core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
 core-$(CONFIG_IA64_SGI_SN2)	+= arch/ia64/sn/
+core-$(CONFIG_IA64_SGI_UV)	+= arch/ia64/uv/
 core-$(CONFIG_KVM) 		+= arch/ia64/kvm/
 
 drivers-$(CONFIG_PCI)		+= arch/ia64/pci/

arch/ia64/kernel/iosapic.c

@@ -558,8 +558,6 @@ static struct iosapic_rte_info * __init_refok iosapic_alloc_rte (void)
 	if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) {
 		rte = alloc_bootmem(sizeof(struct iosapic_rte_info) *
 				    NR_PREALLOCATE_RTE_ENTRIES);
-		if (!rte)
-			return NULL;
 		for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++)
 			list_add(&rte->rte_list, &free_rte_list);
 	}

arch/ia64/kernel/perfmon.c

@@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id)
 	 * invoked after, it will find an empty queue and no
 	 * signal will be sent. In both case, we are safe
 	 */
-	if (filp->f_flags & FASYNC) {
-		DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
-		pfm_do_fasync (-1, filp, ctx, 0);
-	}
-
 	PROTECT_CTX(ctx, flags);
 
 	state     = ctx->ctx_state;
@@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp)
 		return -EBADF;
 	}
 
+	if (filp->f_flags & FASYNC) {
+		DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue));
+		pfm_do_fasync(-1, filp, ctx, 0);
+	}
+
 	PROTECT_CTX(ctx, flags);
 
 	state     = ctx->ctx_state;

arch/ia64/kernel/sal.c

@@ -252,11 +252,10 @@ check_sal_cache_flush (void)
 	local_irq_save(flags);
 
 	/*
-	 * Schedule a timer interrupt, wait until it's reported, and see if
-	 * SAL_CACHE_FLUSH drops it.
+	 * Send ourselves a timer interrupt, wait until it's reported, and see
+	 * if SAL_CACHE_FLUSH drops it.
 	 */
-	ia64_set_itv(IA64_TIMER_VECTOR);
-	ia64_set_itm(ia64_get_itc() + 1000);
+	platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0);
 
 	while (!ia64_get_irr(IA64_TIMER_VECTOR))
 		cpu_relax();

arch/ia64/kernel/setup.c

@@ -578,8 +578,6 @@ setup_arch (char **cmdline_p)
 	cpu_init();	/* initialize the bootstrap CPU */
 	mmu_context_init();	/* initialize context_id bitmap */
 
-	check_sal_cache_flush();
-
 #ifdef CONFIG_ACPI
 	acpi_boot_init();
 #endif
@@ -607,6 +605,7 @@ setup_arch (char **cmdline_p)
 		ia64_mca_init();
 
 	platform_setup(cmdline_p);
+	check_sal_cache_flush();
 	paging_init();
 }
 

arch/ia64/sn/kernel/sn2/sn2_smp.c

@@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si
 	int cpu;
 	char optstr[64];
 
+	if (count == 0 || count > sizeof(optstr))
+		return -EINVAL;
 	if (copy_from_user(optstr, user, count))
 		return -EFAULT;
 	optstr[count - 1] = '\0';

arch/ia64/uv/kernel/setup.c

@@ -17,6 +17,9 @@
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
 
+#ifdef CONFIG_IA64_SGI_UV
+int sn_prom_type;
+#endif
 
 struct redir_addr {
 	unsigned long redirect;
@@ -64,6 +67,15 @@ void __init uv_setup(char **cmdline_p)
 		m_n_config.s.m_skt = 37;
 		m_n_config.s.n_skt = 0;
 		mmr_base = 0;
+#if 0
+		/* Need BIOS calls - TDB */
+		if (!ia64_sn_is_fake_prom())
+			sn_prom_type = 1;
+		else
+#endif
+			sn_prom_type = 2;
+		printk(KERN_INFO "Running on medusa with %s PROM\n",
+					(sn_prom_type == 1) ? "real" : "fake");
 	} else {
 		get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
 		node_id.v = uv_read_local_mmr(UVH_NODE_ID);

arch/mips/Makefile

@@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
 # Sibyte SWARM board
 # Sibyte BCM91x80 (BigSur) board
 #
-libs-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHINE)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHINE)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CRHINE)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_CRHONE)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_CRHONE)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CRHONE)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_RHONE)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_RHONE)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_RHONE)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
-libs-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
+core-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
 
 #
@@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX)		:= 0xffffffff80001000
 #
 core-$(CONFIG_SNI_RM)		+= arch/mips/sni/
 cflags-$(CONFIG_SNI_RM)		+= -Iinclude/asm-mips/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
 load-$(CONFIG_SNI_RM)		+= 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM)		+= 0xffffffff80030000
+endif
 all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
 
 #

arch/mips/au1000/common/platform.c

@@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = {
 static struct resource au1xxx_mmc_resources[] = {
 	[0] = {
 		.start          = SD0_PHYS_ADDR,
-		.end            = SD0_PHYS_ADDR + 0x40,
+		.end            = SD0_PHYS_ADDR + 0x7ffff,
 		.flags          = IORESOURCE_MEM,
 	},
 	[1] = {
 		.start		= SD1_PHYS_ADDR,
-		.end 		= SD1_PHYS_ADDR + 0x40,
+		.end 		= SD1_PHYS_ADDR + 0x7ffff,
 		.flags		= IORESOURCE_MEM,
 	},
 	[2] = {

arch/mips/fw/arc/identify.c

@@ -67,6 +67,11 @@ static struct smatch mach_table[] = {
 		.liname		= "SNI RM200_PCI",
 		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
+	}, {
+		.arcname	= "RM200PCI-R5K",
+		.liname		= "SNI RM200_PCI-R5K",
+		.type		= MACH_SNI_RM200_PCI,
+		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}
 };
 

arch/mips/kernel/smp.c

@@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry,
 {
 	return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
 }
+EXPORT_SYMBOL(smp_call_function);
 
 void smp_call_function_interrupt(void)
 {
@@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 	put_cpu();
 	return 0;
 }
+EXPORT_SYMBOL(smp_call_function_single);
 
 static void stop_this_cpu(void *dummy)
 {

arch/mips/lasat/interrupt.c

@@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift;
 
 void disable_lasat_irq(unsigned int irq_nr)
 {
+	irq_nr -= LASAT_IRQ_BASE;
 	*lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift;
 }
 
 void enable_lasat_irq(unsigned int irq_nr)
 {
+	irq_nr -= LASAT_IRQ_BASE;
 	*lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift;
 }
 

arch/mips/lasat/lasat_board.c

@@ -23,18 +23,19 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/ctype.h>
+#include <linux/mutex.h>
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include "at93c.h"
 /* New model description table */
 #include "lasat_models.h"
 
+static DEFINE_MUTEX(lasat_eeprom_mutex);
+
 #define EEPROM_CRC(data, len) (~crc32(~0, data, len))
 
 struct lasat_info lasat_board_info;
 
-void update_bcastaddr(void);
-
 int EEPROMRead(unsigned int pos, unsigned char *data, int len)
 {
 	int i;
@@ -258,10 +259,6 @@ int lasat_init_board_info(void)
 			sprintf(lasat_board_info.li_typestr, "%d", 10 * c);
 	}
 
-#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL)
-	update_bcastaddr();
-#endif
-
 	return 0;
 }
 
@@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void)
 {
 	unsigned long crc;
 
+	mutex_lock(&lasat_eeprom_mutex);
+
 	/* Generate the CRC */
 	crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info),
 		    sizeof(struct lasat_eeprom_struct) - 4);
@@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void)
 	/* Write the EEPROM info */
 	EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info,
 		    sizeof(struct lasat_eeprom_struct));
+
+	mutex_unlock(&lasat_eeprom_mutex);
 }

arch/mips/lasat/sysctl.c

@@ -29,15 +29,13 @@
 #include <linux/string.h>
 #include <linux/net.h>
 #include <linux/inet.h>
-#include <linux/mutex.h>
 #include <linux/uaccess.h>
 
 #include <asm/time.h>
 
-#include "sysctl.h"
+#ifdef CONFIG_DS1603
 #include "ds1603.h"
-
-static DEFINE_MUTEX(lasat_info_mutex);
+#endif
 
 /* Strategy function to write EEPROM after changing string entry */
 int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
@@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen,
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	r = sysctl_string(table, name,
 			  nlen, oldval, oldlenp, newval, newlen);
-	if (r < 0) {
-		mutex_unlock(&lasat_info_mutex);
+	if (r < 0)
 		return r;
-	}
+
 	if (newval && newlen)
 		lasat_write_eeprom_info();
-	mutex_unlock(&lasat_info_mutex);
 
-	return 1;
+	return 0;
 }
 
 
@@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	r = proc_dostring(table, write, filp, buffer, lenp, ppos);
-	if ((!write) || r) {
-		mutex_unlock(&lasat_info_mutex);
+	if ((!write) || r)
 		return r;
-	}
+
 	lasat_write_eeprom_info();
-	mutex_unlock(&lasat_info_mutex);
 
 	return 0;
 }
@@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp,
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-	if ((!write) || r) {
-		mutex_unlock(&lasat_info_mutex);
+	if ((!write) || r)
 		return r;
-	}
+
 	lasat_write_eeprom_info();
-	mutex_unlock(&lasat_info_mutex);
 
 	return 0;
 }
 
+#ifdef CONFIG_DS1603
 static int rtctmp;
 
-#ifdef CONFIG_DS1603
 /* proc function to read/write RealTime Clock */
 int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	if (!write) {
 		rtctmp = read_persistent_clock();
 		/* check for time < 0 and set to 0 */
@@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
 			rtctmp = 0;
 	}
 	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-	if ((!write) || r) {
-		mutex_unlock(&lasat_info_mutex);
+	if (r)
 		return r;
-	}
-	rtc_mips_set_mmss(rtctmp);
-	mutex_unlock(&lasat_info_mutex);
+
+	if (write)
+		rtc_mips_set_mmss(rtctmp);
 
 	return 0;
 }
@@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen,
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
-	if (r < 0) {
-		mutex_unlock(&lasat_info_mutex);
+	if (r < 0)
 		return r;
-	}
+
 	if (newval && newlen)
 		lasat_write_eeprom_info();
-	mutex_unlock(&lasat_info_mutex);
 
-	return 1;
+	return 0;
 }
 
 #ifdef CONFIG_DS1603
@@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen,
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	rtctmp = read_persistent_clock();
 	if (rtctmp < 0)
 		rtctmp = 0;
 	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
-	if (r < 0) {
-		mutex_unlock(&lasat_info_mutex);
+	if (r < 0)
 		return r;
-	}
 	if (newval && newlen)
 		rtc_mips_set_mmss(rtctmp);
-	mutex_unlock(&lasat_info_mutex);
 
-	return 1;
+	return r;
 }
 #endif
 
 #ifdef CONFIG_INET
-static char lasat_bcastaddr[16];
-
-void update_bcastaddr(void)
-{
-	unsigned int ip;
-
-	ip = (lasat_board_info.li_eeprom_info.ipaddr &
-		lasat_board_info.li_eeprom_info.netmask) |
-		~lasat_board_info.li_eeprom_info.netmask;
-
-	sprintf(lasat_bcastaddr, "%d.%d.%d.%d",
-			(ip)       & 0xff,
-			(ip >>  8) & 0xff,
-			(ip >> 16) & 0xff,
-			(ip >> 24) & 0xff);
-}
-
-static char proc_lasat_ipbuf[32];
-
-/* Parsing of IP address */
 int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	unsigned int ip;
 	char *p, c;
 	int len;
+	char ipbuf[32];
 
 	if (!table->data || !table->maxlen || !*lenp ||
 	    (*ppos && !write)) {
@@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
 		return 0;
 	}
 
-	mutex_lock(&lasat_info_mutex);
 	if (write) {
 		len = 0;
 		p = buffer;
 		while (len < *lenp) {
-			if (get_user(c, p++)) {
-				mutex_unlock(&lasat_info_mutex);
+			if (get_user(c, p++))
 				return -EFAULT;
-			}
 			if (c == 0 || c == '\n')
 				break;
 			len++;
 		}
-		if (len >= sizeof(proc_lasat_ipbuf)-1)
-			len = sizeof(proc_lasat_ipbuf) - 1;
-		if (copy_from_user(proc_lasat_ipbuf, buffer, len)) {
-			mutex_unlock(&lasat_info_mutex);
+		if (len >= sizeof(ipbuf)-1)
+			len = sizeof(ipbuf) - 1;
+		if (copy_from_user(ipbuf, buffer, len))
 			return -EFAULT;
-		}
-		proc_lasat_ipbuf[len] = 0;
+		ipbuf[len] = 0;
 		*ppos += *lenp;
 		/* Now see if we can convert it to a valid IP */
-		ip = in_aton(proc_lasat_ipbuf);
+		ip = in_aton(ipbuf);
 		*(unsigned int *)(table->data) = ip;
 		lasat_write_eeprom_info();
 	} else {
 		ip = *(unsigned int *)(table->data);
-		sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d",
+		sprintf(ipbuf, "%d.%d.%d.%d",
 			(ip)       & 0xff,
 			(ip >>  8) & 0xff,
 			(ip >> 16) & 0xff,
 			(ip >> 24) & 0xff);
-		len = strlen(proc_lasat_ipbuf);
+		len = strlen(ipbuf);
 		if (len > *lenp)
 			len = *lenp;
 		if (len)
-			if (copy_to_user(buffer, proc_lasat_ipbuf, len)) {
-				mutex_unlock(&lasat_info_mutex);
+			if (copy_to_user(buffer, ipbuf, len))
 				return -EFAULT;
-			}
 		if (len < *lenp) {
-			if (put_user('\n', ((char *) buffer) + len)) {
-				mutex_unlock(&lasat_info_mutex);
+			if (put_user('\n', ((char *) buffer) + len))
 				return -EFAULT;
-			}
 			len++;
 		}
 		*lenp = len;
 		*ppos += len;
 	}
-	update_bcastaddr();
-	mutex_unlock(&lasat_info_mutex);
 
 	return 0;
 }
-#endif /* defined(CONFIG_INET) */
+#endif
 
-static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen,
+static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen,
 				     void *oldval, size_t *oldlenp,
 				     void *newval, size_t newlen)
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen);
-	if (r < 0) {
-		mutex_unlock(&lasat_info_mutex);
+	if (r < 0)
 		return r;
-	}
-
 	if (newval && newlen) {
-		if (name && *name == LASAT_PRID)
-			lasat_board_info.li_eeprom_info.prid = *(int *)newval;
-
+		lasat_board_info.li_eeprom_info.prid = *(int *)newval;
 		lasat_write_eeprom_info();
 		lasat_init_board_info();
 	}
-	mutex_unlock(&lasat_info_mutex);
-
 	return 0;
 }
 
-int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
 		       void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int r;
 
-	mutex_lock(&lasat_info_mutex);
 	r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
-	if ((!write) || r) {
-		mutex_unlock(&lasat_info_mutex);
+	if (r < 0)
 		return r;
+	if (write) {
+		lasat_board_info.li_eeprom_info.prid =
+			lasat_board_info.li_prid;
+		lasat_write_eeprom_info();
+		lasat_init_board_info();
 	}
-	if (filp && filp->f_path.dentry) {
-		if (!strcmp(filp->f_path.dentry->d_name.name, "prid"))
-			lasat_board_info.li_eeprom_info.prid =
-				lasat_board_info.li_prid;
-		if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess"))
-			lasat_board_info.li_eeprom_info.debugaccess =
-				lasat_board_info.li_debugaccess;
-	}
-	lasat_write_eeprom_info();
-	mutex_unlock(&lasat_info_mutex);
-
 	return 0;
 }
 
 extern int lasat_boot_to_service;
 
-#ifdef CONFIG_SYSCTL
-
 static ctl_table lasat_table[] = {
 	{
 		.ctl_name	= CTL_UNNUMBERED,
@@ -349,8 +281,8 @@ static ctl_table lasat_table[] = {
 		.data		= &lasat_board_info.li_prid,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_lasat_eeprom_value,
-		.strategy	= &sysctl_lasat_eeprom_value
+		.proc_handler	= &proc_lasat_prid,
+		.strategy	= &sysctl_lasat_prid
 	},
 #ifdef CONFIG_INET
 	{
@@ -363,7 +295,7 @@ static ctl_table lasat_table[] = {
 		.strategy	= &sysctl_lasat_intvec
 	},
 	{
-		.ctl_name	= LASAT_NETMASK,
+		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "netmask",
 		.data		= &lasat_board_info.li_eeprom_info.netmask,
 		.maxlen		= sizeof(int),
@@ -371,15 +303,6 @@ static ctl_table lasat_table[] = {
 		.proc_handler	= &proc_lasat_ip,
 		.strategy	= &sysctl_lasat_intvec
 	},
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "bcastaddr",
-		.data		= &lasat_bcastaddr,
-		.maxlen		= sizeof(lasat_bcastaddr),
-		.mode		= 0600,
-		.proc_handler	= &proc_dostring,
-		.strategy	= &sysctl_string
-	},
 #endif
 	{
 		.ctl_name	= CTL_UNNUMBERED,
@@ -417,7 +340,7 @@ static ctl_table lasat_table[] = {
 		.data		= &lasat_board_info.li_namestr,
 		.maxlen		= sizeof(lasat_board_info.li_namestr),
 		.mode		= 0444,
-		.proc_handler	=  &proc_dostring,
+		.proc_handler	= &proc_dostring,
 		.strategy	= &sysctl_string
 	},
 	{
@@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void)
 
 	lasat_table_header =
 		register_sysctl_table(lasat_root_table);
+	if (!lasat_table_header) {
+		printk(KERN_ERR "Unable to register LASAT sysctl\n");
+		return -ENOMEM;
+	}
 
 	return 0;
 }
 
 __initcall(lasat_register_sysctl);
-#endif /* CONFIG_SYSCTL */

arch/mips/lasat/sysctl.h

-/*
- * LASAT sysctl values
- */
-
-#ifndef _LASAT_SYSCTL_H
-#define _LASAT_SYSCTL_H
-
-/* /proc/sys/lasat */
-enum {
-	LASAT_CPU_HZ = 1,
-	LASAT_BUS_HZ,
-	LASAT_MODEL,
-	LASAT_PRID,
-	LASAT_IPADDR,
-	LASAT_NETMASK,
-	LASAT_BCAST,
-	LASAT_PASSWORD,
-	LASAT_SBOOT,
-	LASAT_RTC,
-	LASAT_NAMESTR,
-	LASAT_TYPESTR,
-};
-
-#endif /* _LASAT_SYSCTL_H */

arch/mips/mips-boards/generic/amon.c

@@ -28,7 +28,7 @@
 
 int amon_cpu_avail(int cpu)
 {
-	struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH);
+	struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH);
 
 	if (cpu < 0 || cpu >= NCPULAUNCH) {
 		pr_debug("avail: cpu%d is out of range\n", cpu);
@@ -53,7 +53,7 @@ void amon_cpu_start(int cpu,
 		    unsigned long gp, unsigned long a0)
 {
 	volatile struct cpulaunch *launch =
-		(struct cpulaunch  *)KSEG0ADDR(CPULAUNCH);
+		(struct cpulaunch  *)CKSEG0ADDR(CPULAUNCH);
 
 	if (!amon_cpu_avail(cpu))
 		return;

arch/mips/mips-boards/malta/Makefile

@@ -19,9 +19,8 @@
 # under Linux.
 #
 
-obj-y := malta_int.o malta_platform.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
 
-obj-$(CONFIG_MTD) += malta_mtd.o
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
 

arch/mips/mm/c-r4k.c

@@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args)
 	struct page *page = pfn_to_page(fcp_args->pfn);
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
+	int map_coherent = 0;
 	pgd_t *pgdp;
 	pud_t *pudp;
 	pmd_t *pmdp;
@@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args)
 		 * Use kmap_coherent or kmap_atomic to do flushes for
 		 * another ASID than the current one.
 		 */
-		if (cpu_has_dc_aliases)
+		map_coherent = (cpu_has_dc_aliases &&
+				page_mapped(page) && !Page_dcache_dirty(page));
+		if (map_coherent)
 			vaddr = kmap_coherent(page, addr);
 		else
 			vaddr = kmap_atomic(page, KM_USER0);
@@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args)
 	}
 
 	if (vaddr) {
-		if (cpu_has_dc_aliases)
+		if (map_coherent)
 			kunmap_coherent();
 		else
 			kunmap_atomic(vaddr, KM_USER0);
@@ -1226,6 +1229,28 @@ void au1x00_fixup_config_od(void)
 	}
 }
 
+/* CP0 hazard avoidance. */
+#define NXP_BARRIER()							\
+	 __asm__ __volatile__(						\
+	".set noreorder\n\t"						\
+	"nop; nop; nop; nop; nop; nop;\n\t"				\
+	".set reorder\n\t")
+
+static void nxp_pr4450_fixup_config(void)
+{
+	unsigned long config0;
+
+	config0 = read_c0_config();
+
+	/* clear all three cache coherency fields */
+	config0 &= ~(0x7 | (7 << 25) | (7 << 28));
+	config0 |= (((_page_cachable_default >> _CACHE_SHIFT) <<  0) |
+		    ((_page_cachable_default >> _CACHE_SHIFT) << 25) |
+		    ((_page_cachable_default >> _CACHE_SHIFT) << 28));
+	write_c0_config(config0);
+	NXP_BARRIER();
+}
+
 static int __cpuinitdata cca = -1;
 
 static int __init cca_setup(char *str)
@@ -1271,6 +1296,10 @@ static void __cpuinit coherency_setup(void)
 	case CPU_AU1500: /* rev. AB */
 		au1x00_fixup_config_od();
 		break;
+
+	case PRID_IMP_PR4450:
+		nxp_pr4450_fixup_config();
+		break;
 	}
 }
 

arch/mips/mm/init.c

@@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
  * don't have to care about aliases on other CPUs.
  */
 unsigned long empty_zero_page, zero_page_mask;
+EXPORT_SYMBOL_GPL(empty_zero_page);
 
 /*
  * Not static inline because used by IP27 special magic initialization code

arch/mips/mm/page.c

@@ -460,7 +460,7 @@ void __cpuinit build_copy_page(void)
 		build_copy_load_pref(&buf, -off);
 		off -= cache_line_size;
 	}
-	off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+	off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) *
 	                        cache_line_size : 0;
 	while (off) {
 		build_copy_store_pref(&buf, -off);

arch/mips/nxp/pnx8550/jbs/board_setup.c

@@ -47,16 +47,7 @@
 
 void __init board_setup(void)
 {
-	unsigned long config0, configpr;
-
-	config0 = read_c0_config();
-
-	/* clear all three cache coherency fields */
-	config0 &= ~(0x7 | (7<<25) | (7<<28));
-	config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
-			(CONF_CM_DEFAULT<<28));
-	write_c0_config(config0);
-	BARRIER;
+	unsigned long configpr;
 
 	configpr = read_c0_config7();
 	configpr |= (1<<19); /* enable tlb */

arch/mips/nxp/pnx8550/stb810/board_setup.c

@@ -33,15 +33,7 @@
 
 void __init board_setup(void)
 {
-	unsigned long config0, configpr;
-
-	config0 = read_c0_config();
-
-	/* clear all three cache coherency fields */
-	config0 &= ~(0x7 | (7<<25) | (7<<28));
-	config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) |
-			(CONF_CM_DEFAULT<<28));
-	write_c0_config(config0);
+	unsigned long configpr;
 
 	configpr = read_c0_config7();
 	configpr |= (1<<19); /* enable tlb */

arch/mips/pci/pci-sb1250.c

@@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = {
 
 static int __init sb1250_pcibios_init(void)
 {
+	void __iomem *io_map_base;
 	uint32_t cmdreg;
 	uint64_t reg;
 	extern int pci_probe_only;
@@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void)
 	 * works correctly with most of Linux's drivers.
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
-
-	set_io_port_base((unsigned long)
-			 ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536));
 	isa_slot_offset = (unsigned long)
 	    ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
 
+	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
+	sb1250_controller.io_map_base = io_map_base;
+	set_io_port_base((unsigned long)io_map_base);
+
 #ifdef CONFIG_SIBYTE_HAS_LDT
 	/*
 	 * Also check the LDT bridge's enable, just in case we didn't

arch/mips/pci/pci-vr41xx.c

@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2001-2003 MontaVista Software Inc.
  *    Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- *  Copyright (C) 2004-2005  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *  Copyright (C) 2004-2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
  *  Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void)
 		ioport_resource.end = IO_PORT_RESOURCE_END;
 	}
 
+	if (setup->master_io) {
+		void __iomem *io_map_base;
+		struct resource *res = vr41xx_pci_controller.io_resource;
+		master = setup->master_io;
+		io_map_base = ioremap(master->bus_base_address,
+				      res->end - res->start + 1);
+		if (!io_map_base)
+			return -EBUSY;
+
+		vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base;
+	}
+
 	register_pci_controller(&vr41xx_pci_controller);
 
 	return 0;

arch/mips/sibyte/swarm/Makefile

-lib-y				= setup.o rtc_xicor1241.o rtc_m41t81.o
+obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
-lib-$(CONFIG_KGDB)		+= dbg_io.o
+obj-$(CONFIG_KGDB)		+= dbg_io.o

arch/mn10300/kernel/process.c

@@ -20,7 +20,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>

arch/mn10300/kernel/setup.c

@@ -17,7 +17,6 @@
 #include <linux/ptrace.h>
 #include <linux/slab.h>
 #include <linux/user.h>
-#include <linux/a.out.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>

arch/powerpc/Makefile

@@ -96,6 +96,8 @@ endif
 else
 	KBUILD_CFLAGS += $(call cc-option,-mtune=power4)
 endif
+else
+LDFLAGS_MODULE	+= arch/powerpc/lib/crtsavres.o
 endif
 
 ifeq ($(CONFIG_TUNE_CELL),y)
@@ -154,7 +156,7 @@ all: zImage
 
 CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
-BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
 
 PHONY += $(BOOT_TARGETS)
 

arch/powerpc/boot/Makefile

@@ -51,7 +51,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-src-wlib := string.S crt0.S stdio.c main.c \
+src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
 		ns16550.c serial.c simple_alloc.c div64.S util.S \
 		gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \

arch/powerpc/boot/crtsavres.S

+/*
+ * Special support for eabi and SVR4
+ *
+ *   Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc.
+ *   Copyright 2008 Freescale Semiconductor, Inc.
+ *   Written By Michael Meissner
+ *
+ * Based on gcc/config/rs6000/crtsavres.asm from gcc
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * In addition to the permissions in the GNU General Public License, the
+ * Free Software Foundation gives you unlimited permission to link the
+ * compiled version of this file with other programs, and to distribute
+ * those programs without any restriction coming from the use of this
+ * file.  (The General Public License restrictions do apply in other
+ * respects; for example, they cover modification of the file, and
+ * distribution when not linked into another program.)
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ *    As a special exception, if you link this library with files
+ *    compiled with GCC to produce an executable, this does not cause
+ *    the resulting executable to be covered by the GNU General Public License.
+ *    This exception does not however invalidate any other reasons why
+ *    the executable file might be covered by the GNU General Public License.
+ */
+
+	.file	"crtsavres.S"
+	.section ".text"
+
+/* On PowerPC64 Linux, these functions are provided by the linker.  */
+#ifndef __powerpc64__
+
+#define _GLOBAL(name) \
+	.type name,@function; \
+	.globl name; \
+name:
+
+/* Routines for saving integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer save area.  */
+
+_GLOBAL(_savegpr_14)
+_GLOBAL(_save32gpr_14)
+	stw	14,-72(11)	/* save gp registers */
+_GLOBAL(_savegpr_15)
+_GLOBAL(_save32gpr_15)
+	stw	15,-68(11)
+_GLOBAL(_savegpr_16)
+_GLOBAL(_save32gpr_16)
+	stw	16,-64(11)
+_GLOBAL(_savegpr_17)
+_GLOBAL(_save32gpr_17)
+	stw	17,-60(11)
+_GLOBAL(_savegpr_18)
+_GLOBAL(_save32gpr_18)
+	stw	18,-56(11)
+_GLOBAL(_savegpr_19)
+_GLOBAL(_save32gpr_19)
+	stw	19,-52(11)
+_GLOBAL(_savegpr_20)
+_GLOBAL(_save32gpr_20)
+	stw	20,-48(11)
+_GLOBAL(_savegpr_21)
+_GLOBAL(_save32gpr_21)
+	stw	21,-44(11)
+_GLOBAL(_savegpr_22)
+_GLOBAL(_save32gpr_22)
+	stw	22,-40(11)
+_GLOBAL(_savegpr_23)
+_GLOBAL(_save32gpr_23)
+	stw	23,-36(11)
+_GLOBAL(_savegpr_24)
+_GLOBAL(_save32gpr_24)
+	stw	24,-32(11)
+_GLOBAL(_savegpr_25)
+_GLOBAL(_save32gpr_25)
+	stw	25,-28(11)
+_GLOBAL(_savegpr_26)
+_GLOBAL(_save32gpr_26)
+	stw	26,-24(11)
+_GLOBAL(_savegpr_27)
+_GLOBAL(_save32gpr_27)
+	stw	27,-20(11)
+_GLOBAL(_savegpr_28)
+_GLOBAL(_save32gpr_28)
+	stw	28,-16(11)
+_GLOBAL(_savegpr_29)
+_GLOBAL(_save32gpr_29)
+	stw	29,-12(11)
+_GLOBAL(_savegpr_30)
+_GLOBAL(_save32gpr_30)
+	stw	30,-8(11)
+_GLOBAL(_savegpr_31)
+_GLOBAL(_save32gpr_31)
+	stw	31,-4(11)
+	blr
+
+/* Routines for restoring integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area.  */
+
+_GLOBAL(_restgpr_14)
+_GLOBAL(_rest32gpr_14)
+	lwz	14,-72(11)	/* restore gp registers */
+_GLOBAL(_restgpr_15)
+_GLOBAL(_rest32gpr_15)
+	lwz	15,-68(11)
+_GLOBAL(_restgpr_16)
+_GLOBAL(_rest32gpr_16)
+	lwz	16,-64(11)
+_GLOBAL(_restgpr_17)
+_GLOBAL(_rest32gpr_17)
+	lwz	17,-60(11)
+_GLOBAL(_restgpr_18)
+_GLOBAL(_rest32gpr_18)
+	lwz	18,-56(11)
+_GLOBAL(_restgpr_19)
+_GLOBAL(_rest32gpr_19)
+	lwz	19,-52(11)
+_GLOBAL(_restgpr_20)
+_GLOBAL(_rest32gpr_20)
+	lwz	20,-48(11)
+_GLOBAL(_restgpr_21)
+_GLOBAL(_rest32gpr_21)
+	lwz	21,-44(11)
+_GLOBAL(_restgpr_22)
+_GLOBAL(_rest32gpr_22)
+	lwz	22,-40(11)
+_GLOBAL(_restgpr_23)
+_GLOBAL(_rest32gpr_23)
+	lwz	23,-36(11)
+_GLOBAL(_restgpr_24)
+_GLOBAL(_rest32gpr_24)
+	lwz	24,-32(11)
+_GLOBAL(_restgpr_25)
+_GLOBAL(_rest32gpr_25)
+	lwz	25,-28(11)
+_GLOBAL(_restgpr_26)
+_GLOBAL(_rest32gpr_26)
+	lwz	26,-24(11)
+_GLOBAL(_restgpr_27)
+_GLOBAL(_rest32gpr_27)
+	lwz	27,-20(11)
+_GLOBAL(_restgpr_28)
+_GLOBAL(_rest32gpr_28)
+	lwz	28,-16(11)
+_GLOBAL(_restgpr_29)
+_GLOBAL(_rest32gpr_29)
+	lwz	29,-12(11)
+_GLOBAL(_restgpr_30)
+_GLOBAL(_rest32gpr_30)
+	lwz	30,-8(11)
+_GLOBAL(_restgpr_31)
+_GLOBAL(_rest32gpr_31)
+	lwz	31,-4(11)
+	blr
+
+/* Routines for restoring integer registers, called by the compiler.  */
+/* Called with r11 pointing to the stack header word of the caller of the */
+/* function, just beyond the end of the integer restore area.  */
+
+_GLOBAL(_restgpr_14_x)
+_GLOBAL(_rest32gpr_14_x)
+	lwz	14,-72(11)	/* restore gp registers */
+_GLOBAL(_restgpr_15_x)
+_GLOBAL(_rest32gpr_15_x)
+	lwz	15,-68(11)
+_GLOBAL(_restgpr_16_x)
+_GLOBAL(_rest32gpr_16_x)
+	lwz	16,-64(11)
+_GLOBAL(_restgpr_17_x)
+_GLOBAL(_rest32gpr_17_x)
+	lwz	17,-60(11)
+_GLOBAL(_restgpr_18_x)
+_GLOBAL(_rest32gpr_18_x)
+	lwz	18,-56(11)
+_GLOBAL(_restgpr_19_x)
+_GLOBAL(_rest32gpr_19_x)
+	lwz	19,-52(11)
+_GLOBAL(_restgpr_20_x)
+_GLOBAL(_rest32gpr_20_x)
+	lwz	20,-48(11)
+_GLOBAL(_restgpr_21_x)
+_GLOBAL(_rest32gpr_21_x)
+	lwz	21,-44(11)
+_GLOBAL(_restgpr_22_x)
+_GLOBAL(_rest32gpr_22_x)
+	lwz	22,-40(11)
+_GLOBAL(_restgpr_23_x)
+_GLOBAL(_rest32gpr_23_x)
+	lwz	23,-36(11)
+_GLOBAL(_restgpr_24_x)
+_GLOBAL(_rest32gpr_24_x)
+	lwz	24,-32(11)
+_GLOBAL(_restgpr_25_x)
+_GLOBAL(_rest32gpr_25_x)
+	lwz	25,-28(11)
+_GLOBAL(_restgpr_26_x)
+_GLOBAL(_rest32gpr_26_x)
+	lwz	26,-24(11)
+_GLOBAL(_restgpr_27_x)
+_GLOBAL(_rest32gpr_27_x)
+	lwz	27,-20(11)
+_GLOBAL(_restgpr_28_x)
+_GLOBAL(_rest32gpr_28_x)
+	lwz	28,-16(11)
+_GLOBAL(_restgpr_29_x)
+_GLOBAL(_rest32gpr_29_x)
+	lwz	29,-12(11)
+_GLOBAL(_restgpr_30_x)
+_GLOBAL(_rest32gpr_30_x)
+	lwz	30,-8(11)
+_GLOBAL(_restgpr_31_x)
+_GLOBAL(_rest32gpr_31_x)
+	lwz	0,4(11)
+	lwz	31,-4(11)
+	mtlr	0
+	mr	1,11
+	blr
+#endif

arch/powerpc/boot/dts/mpc8377_rdb.dts

@@ -164,12 +164,6 @@ phy2: ethernet-phy@2 {
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,7 +189,7 @@ enet1: ethernet@25000 {
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
+			fixed-link = <1 1 1000 0 0>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8378_rdb.dts

@@ -164,12 +164,6 @@ phy2: ethernet-phy@2 {
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,7 +189,7 @@ enet1: ethernet@25000 {
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
+			fixed-link = <1 1 1000 0 0>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8379_rdb.dts

@@ -164,12 +164,6 @@ phy2: ethernet-phy@2 {
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
-			phy3: ethernet-phy@3 {
-				interrupt-parent = <&ipic>;
-				interrupts = <18 0x8>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
 		};
 
 		enet0: ethernet@24000 {
@@ -195,7 +189,7 @@ enet1: ethernet@25000 {
 			interrupts = <35 0x8 36 0x8 37 0x8>;
 			phy-connection-type = "mii";
 			interrupt-parent = <&ipic>;
-			phy-handle = <&phy3>;
+			fixed-link = <1 1 1000 0 0>;
 		};
 
 		serial0: serial@4500 {

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -409,7 +409,7 @@ pci2: pcie@e000a000 {
 		interrupts = <26 2>;
 		bus-range = <0 255>;
 		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
 		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
@@ -428,7 +428,7 @@ pcie@0 {
 
 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
-				  0x0 0x8000000>;
+				  0x0 0x100000>;
 		};
 	};
 };

arch/powerpc/configs/85xx/sbc8548_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Mon Mar 24 08:48:39 2008
+# Linux kernel version: 2.6.26-rc5
+# Mon Jun  9 08:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -111,6 +114,7 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -151,6 +155,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -206,11 +211,13 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -233,6 +240,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -242,11 +250,12 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -294,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -449,7 +456,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -469,6 +475,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -476,6 +483,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -522,6 +530,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -558,12 +567,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -596,12 +600,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -628,14 +642,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -648,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -705,7 +715,6 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -732,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -742,6 +752,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -749,6 +760,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -756,6 +768,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -765,48 +778,78 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set