wusb: add the Wireless USB include files.

Common header files derived from the WUSB 1.0 specification.
Signed-off-by: David Vrabel <david.vrabel@csr.com>

include/linux/usb/wusb-wa.h

+/*
+ * Wireless USB Wire Adapter constants and structures.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation.
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ * FIXME: organize properly, group logically
+ *
+ * All the event structures are defined in uwb/spec.h, as they are
+ * common to the WHCI and WUSB radio control interfaces.
+ *
+ * References:
+ *   [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
+ */
+#ifndef __LINUX_USB_WUSB_WA_H
+#define __LINUX_USB_WUSB_WA_H
+
+/**
+ * Radio Command Request for the Radio Control Interface
+ *
+ * Radio Control Interface command and event codes are the same as
+ * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
+ */
+enum {
+	WA_EXEC_RC_CMD = 40,	/* Radio Control command Request */
+};
+
+/* Wireless Adapter Requests ([WUSB] table 8-51) */
+enum {
+	WUSB_REQ_ADD_MMC_IE     = 20,
+	WUSB_REQ_REMOVE_MMC_IE  = 21,
+	WUSB_REQ_SET_NUM_DNTS   = 22,
+	WUSB_REQ_SET_CLUSTER_ID = 23,
+	WUSB_REQ_SET_DEV_INFO   = 24,
+	WUSB_REQ_GET_TIME       = 25,
+	WUSB_REQ_SET_STREAM_IDX = 26,
+	WUSB_REQ_SET_WUSB_MAS   = 27,
+};
+
+
+/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
+enum {
+	WUSB_TIME_ADJ   = 0,
+	WUSB_TIME_BPST  = 1,
+	WUSB_TIME_WUSB  = 2,
+};
+
+enum {
+	WA_ENABLE = 0x01,
+	WA_RESET = 0x02,
+	RPIPE_PAUSE = 0x1,
+};
+
+/* Responses from Get Status request ([WUSB] section 8.3.1.6) */
+enum {
+	WA_STATUS_ENABLED = 0x01,
+	WA_STATUS_RESETTING = 0x02
+};
+
+enum rpipe_crs {
+	RPIPE_CRS_CTL = 0x01,
+	RPIPE_CRS_ISO = 0x02,
+	RPIPE_CRS_BULK = 0x04,
+	RPIPE_CRS_INTR = 0x08
+};
+
+/**
+ * RPipe descriptor ([WUSB] section 8.5.2.11)
+ *
+ * FIXME: explain rpipes
+ */
+struct usb_rpipe_descriptor {
+	u8 	bLength;
+	u8	bDescriptorType;
+	__le16  wRPipeIndex;
+	__le16	wRequests;
+	__le16	wBlocks;		/* rw if 0 */
+	__le16	wMaxPacketSize;		/* rw? */
+	u8	bHSHubAddress;		/* reserved: 0 */
+	u8	bHSHubPort;		/* ??? FIXME ??? */
+	u8	bSpeed;			/* rw: xfer rate 'enum uwb_phy_rate' */
+	u8	bDeviceAddress;		/* rw: Target device address */
+	u8	bEndpointAddress;	/* rw: Target EP address */
+	u8	bDataSequence;		/* ro: Current Data sequence */
+	__le32	dwCurrentWindow;	/* ro */
+	u8	bMaxDataSequence;	/* ro?: max supported seq */
+	u8	bInterval;		/* rw:  */
+	u8	bOverTheAirInterval;	/* rw:  */
+	u8	bmAttribute;		/* ro?  */
+	u8	bmCharacteristics;	/* ro? enum rpipe_attr, supported xsactions */
+	u8	bmRetryOptions;		/* rw? */
+	__le16	wNumTransactionErrors;	/* rw */
+} __attribute__ ((packed));
+
+/**
+ * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
+ *
+ * These are the notifications coming on the notification endpoint of
+ * an HWA and a DWA.
+ */
+enum wa_notif_type {
+	DWA_NOTIF_RWAKE = 0x91,
+	DWA_NOTIF_PORTSTATUS = 0x92,
+	WA_NOTIF_TRANSFER = 0x93,
+	HWA_NOTIF_BPST_ADJ = 0x94,
+	HWA_NOTIF_DN = 0x95,
+};
+
+/**
+ * Wire Adapter notification header
+ *
+ * Notifications coming from a wire adapter use a common header
+ * defined in [WUSB] sections 8.4.5 & 8.5.4.
+ */
+struct wa_notif_hdr {
+	u8 bLength;
+	u8 bNotifyType;			/* enum wa_notif_type */
+} __attribute__((packed));
+
+/**
+ * HWA DN Received notification [(WUSB] section 8.5.4.2)
+ *
+ * The DNData is specified in WUSB1.0[7.6]. For each device
+ * notification we received, we just need to dispatch it.
+ *
+ * @dndata:  this is really an array of notifications, but all start
+ *           with the same header.
+ */
+struct hwa_notif_dn {
+	struct wa_notif_hdr hdr;
+	u8 bSourceDeviceAddr;		/* from errata 2005/07 */
+	u8 bmAttributes;
+	struct wusb_dn_hdr dndata[];
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3 */
+enum wa_xfer_type {
+	WA_XFER_TYPE_CTL = 0x80,
+	WA_XFER_TYPE_BI = 0x81,		/* bulk/interrupt */
+	WA_XFER_TYPE_ISO = 0x82,
+	WA_XFER_RESULT = 0x83,
+	WA_XFER_ABORT = 0x84,
+};
+
+/* [WUSB] section 8.3.3 */
+struct wa_xfer_hdr {
+	u8 bLength;			/* 0x18 */
+	u8 bRequestType;		/* 0x80 WA_REQUEST_TYPE_CTL */
+	__le16 wRPipe;			/* RPipe index */
+	__le32 dwTransferID;		/* Host-assigned ID */
+	__le32 dwTransferLength;	/* Length of data to xfer */
+	u8 bTransferSegment;
+} __attribute__((packed));
+
+struct wa_xfer_ctl {
+	struct wa_xfer_hdr hdr;
+	u8 bmAttribute;
+	__le16 wReserved;
+	struct usb_ctrlrequest baSetupData;
+} __attribute__((packed));
+
+struct wa_xfer_bi {
+	struct wa_xfer_hdr hdr;
+	u8 bReserved;
+	__le16 wReserved;
+} __attribute__((packed));
+
+struct wa_xfer_hwaiso {
+	struct wa_xfer_hdr hdr;
+	u8 bReserved;
+	__le16 wPresentationTime;
+	__le32 dwNumOfPackets;
+	/* FIXME: u8 pktdata[]? */
+} __attribute__((packed));
+
+/* [WUSB] section 8.3.3.5 */
+struct wa_xfer_abort {
+	u8 bLength;
+	u8 bRequestType;
+	__le16 wRPipe;			/* RPipe index */
+	__le32 dwTransferID;		/* Host-assigned ID */
+} __attribute__((packed));
+
+/**
+ * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
+ *
+ */
+struct wa_notif_xfer {
+	struct wa_notif_hdr hdr;
+	u8 bEndpoint;
+	u8 Reserved;
+} __attribute__((packed));
+
+/** Transfer result basic codes [WUSB] table 8-15 */
+enum {
+	WA_XFER_STATUS_SUCCESS,
+	WA_XFER_STATUS_HALTED,
+	WA_XFER_STATUS_DATA_BUFFER_ERROR,
+	WA_XFER_STATUS_BABBLE,
+	WA_XFER_RESERVED,
+	WA_XFER_STATUS_NOT_FOUND,
+	WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
+	WA_XFER_STATUS_TRANSACTION_ERROR,
+	WA_XFER_STATUS_ABORTED,
+	WA_XFER_STATUS_RPIPE_NOT_READY,
+	WA_XFER_INVALID_FORMAT,
+	WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
+	WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
+};
+
+/** [WUSB] section 8.3.3.4 */
+struct wa_xfer_result {
+	struct wa_notif_hdr hdr;
+	__le32 dwTransferID;
+	__le32 dwTransferLength;
+	u8     bTransferSegment;
+	u8     bTransferStatus;
+	__le32 dwNumOfPackets;
+} __attribute__((packed));
+
+/**
+ * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
+ *
+ * NOTE: u16 fields are read Little Endian from the hardware.
+ *
+ * @bNumPorts is the original max number of devices that the host can
+ *            connect; we might chop this so the stack can handle
+ *            it. In case you need to access it, use wusbhc->ports_max
+ *            if it is a Wireless USB WA.
+ */
+struct usb_wa_descriptor {
+	u8	bLength;
+	u8	bDescriptorType;
+	u16	bcdWAVersion;
+	u8	bNumPorts;		/* don't use!! */
+	u8	bmAttributes;		/* Reserved == 0 */
+	u16	wNumRPipes;
+	u16	wRPipeMaxBlock;
+	u8	bRPipeBlockSize;
+	u8	bPwrOn2PwrGood;
+	u8	bNumMMCIEs;
+	u8	DeviceRemovable;	/* FIXME: in DWA this is up to 16 bytes */
+} __attribute__((packed));
+
+/**
+ * HWA Device Information Buffer (WUSB1.0[T8.54])
+ */
+struct hwa_dev_info {
+	u8	bmDeviceAvailability[32];       /* FIXME: ignored for now */
+	u8	bDeviceAddress;
+	__le16	wPHYRates;
+	u8	bmDeviceAttribute;
+} __attribute__((packed));
+
+#endif /* #ifndef __LINUX_USB_WUSB_WA_H */