Commit c80bcf19 authored by Michael Walle's avatar Michael Walle Committed by Shawn Guo

arm64: defconfig: enable the sl28cpld board management controller

Enable the kernel modules for the board management controller "sl28cpld"
which is used on the SMARC-sAL28 board.
Signed-off-by: default avatarMichael Walle <michael@walle.cc>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 19bc26e0
......@@ -500,6 +500,7 @@ CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_BD9571MWV=m
CONFIG_GPIO_MAX77620=y
CONFIG_GPIO_SL28CPLD=m
CONFIG_POWER_AVS=y
CONFIG_QCOM_CPR=y
CONFIG_ROCKCHIP_IODOMAIN=y
......@@ -513,6 +514,7 @@ CONFIG_SENSORS_ARM_SCPI=y
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_RASPBERRYPI_HWMON=m
CONFIG_SENSORS_SL28CPLD=m
CONFIG_SENSORS_INA2XX=m
CONFIG_SENSORS_INA3221=m
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
......@@ -535,6 +537,7 @@ CONFIG_QCOM_TSENS=y
CONFIG_QCOM_SPMI_TEMP_ALARM=m
CONFIG_UNIPHIER_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SL28CPLD_WATCHDOG=m
CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ARM_SBSA_WATCHDOG=y
CONFIG_ARM_SMC_WATCHDOG=y
......@@ -560,6 +563,7 @@ CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SL28CPLD=y
CONFIG_MFD_ROHM_BD718XX=y
CONFIG_MFD_WCD934X=m
CONFIG_REGULATOR_FIXED_VOLTAGE=y
......@@ -938,8 +942,10 @@ CONFIG_PWM_MESON=m
CONFIG_PWM_RCAR=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
CONFIG_SL28CPLD_INTC=y
CONFIG_QCOM_PDC=y
CONFIG_RESET_IMX7=y
CONFIG_RESET_QCOM_AOSS=y
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment