Merge tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux into arm/drivers

Reset controller updates for v5.10

This tag allows to build reset-imx7 as a module, and adds support to
reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the
Versal platform to the reset-zynqmp driver, and fixes some kerneldoc
comments in the core and in sti/reset-syscfg.

* tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux:
  reset: sti: reset-syscfg: fix struct description warnings
  reset: imx7: add the cm4 reset for i.MX8MQ
  dt-bindings: reset: imx8mq: add m4 reset
  reset: Fix and extend kerneldoc
  reset: reset-zynqmp: Added support for Versal platform
  dt-bindings: reset: Updated binding for Versal reset driver
  reset: imx7: Support module build

Link: https://lore.kernel.org/r/2b77c90d2b970eb8fa09000b9ecb564bffa76374.camel@pengutronix.deSigned-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/reset/xlnx,zynqmp-reset.txt

 --------------------------------------------------------------------------
- =  Zynq UltraScale+ MPSoC reset driver binding =
+ =  Zynq UltraScale+ MPSoC and Versal reset driver binding =
 --------------------------------------------------------------------------
-The Zynq UltraScale+ MPSoC has several different resets.
+The Zynq UltraScale+ MPSoC and Versal has several different resets.
 
 See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
 about zynqmp resets.
@@ -10,7 +10,8 @@ Please also refer to reset.txt in this directory for common reset
 controller binding usage.
 
 Required Properties:
-- compatible:	"xlnx,zynqmp-reset"
+- compatible:	"xlnx,zynqmp-reset" for Zynq UltraScale+ MPSoC platform
+		"xlnx,versal-reset" for Versal platform
 - #reset-cells:	Specifies the number of cells needed to encode reset
 		line, should be 1
 
@@ -37,8 +38,10 @@ Device nodes that need access to reset lines should
 specify them as a reset phandle in their corresponding node as
 specified in reset.txt.
 
-For list of all valid reset indicies see
+For list of all valid reset indices for Zynq UltraScale+ MPSoC see
 <dt-bindings/reset/xlnx-zynqmp-resets.h>
+For list of all valid reset indices for Versal see
+<dt-bindings/reset/xlnx-versal-resets.h>
 
 Example:
 

drivers/reset/Kconfig

@@ -65,9 +65,10 @@ config RESET_HSDK
 	  This enables the reset controller driver for HSDK board.
 
 config RESET_IMX7
-	bool "i.MX7/8 Reset Driver" if COMPILE_TEST
+	tristate "i.MX7/8 Reset Driver"
 	depends on HAS_IOMEM
-	default SOC_IMX7D || (ARM64 && ARCH_MXC)
+	depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
+	default y if SOC_IMX7D
 	select MFD_SYSCON
 	help
 	  This enables the reset controller driver for i.MX7 SoCs.

drivers/reset/core.c

@@ -32,7 +32,8 @@ static LIST_HEAD(reset_lookup_list);
  * @refcnt: Number of gets of this reset_control
  * @acquired: Only one reset_control may be acquired for a given rcdev and id.
  * @shared: Is this a shared (1), or an exclusive (0) reset_control?
- * @deassert_cnt: Number of times this reset line has been deasserted
+ * @array: Is this an array of reset controls (1)?
+ * @deassert_count: Number of times this reset line has been deasserted
  * @triggered_count: Number of times this reset line has been reset. Currently
  *                   only used for shared resets, which means that the value
  *                   will be either 0 or 1.

drivers/reset/reset-imx7.c

@@ -8,7 +8,7 @@
  */
 
 #include <linux/mfd/syscon.h>
-#include <linux/mod_devicetable.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
@@ -178,6 +178,9 @@ static const struct imx7_src_signal imx8mq_src_signals[IMX8MQ_RESET_NUM] = {
 	[IMX8MQ_RESET_A53_SOC_DBG_RESET]	= { SRC_A53RCR0, BIT(20) },
 	[IMX8MQ_RESET_A53_L2RESET]		= { SRC_A53RCR0, BIT(21) },
 	[IMX8MQ_RESET_SW_NON_SCLR_M4C_RST]	= { SRC_M4RCR, BIT(0) },
+	[IMX8MQ_RESET_SW_M4C_RST]		= { SRC_M4RCR, BIT(1) },
+	[IMX8MQ_RESET_SW_M4P_RST]		= { SRC_M4RCR, BIT(2) },
+	[IMX8MQ_RESET_M4_ENABLE]		= { SRC_M4RCR, BIT(3) },
 	[IMX8MQ_RESET_OTG1_PHY_RESET]		= { SRC_USBOPHY1_RCR, BIT(0) },
 	[IMX8MQ_RESET_OTG2_PHY_RESET]		= { SRC_USBOPHY2_RCR, BIT(0) },
 	[IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N]	= { SRC_MIPIPHY_RCR, BIT(1) },
@@ -238,6 +241,7 @@ static int imx8mq_reset_set(struct reset_controller_dev *rcdev,
 	case IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N:	/* fallthrough */
 	case IMX8MQ_RESET_MIPI_DSI_RESET_N:	/* fallthrough */
 	case IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N:	/* fallthrough */
+	case IMX8MQ_RESET_M4_ENABLE:
 		value = assert ? 0 : bit;
 		break;
 	}
@@ -386,6 +390,7 @@ static const struct of_device_id imx7_reset_dt_ids[] = {
 	{ .compatible = "fsl,imx8mp-src", .data = &variant_imx8mp },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, imx7_reset_dt_ids);
 
 static struct platform_driver imx7_reset_driver = {
 	.probe	= imx7_reset_probe,
@@ -394,4 +399,8 @@ static struct platform_driver imx7_reset_driver = {
 		.of_match_table	= imx7_reset_dt_ids,
 	},
 };
-builtin_platform_driver(imx7_reset_driver);
+module_platform_driver(imx7_reset_driver);
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("NXP i.MX7 reset driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/reset-zynqmp.c

@@ -9,12 +9,20 @@
 #include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/firmware/xlnx-zynqmp.h>
+#include <linux/of_device.h>
 
 #define ZYNQMP_NR_RESETS (ZYNQMP_PM_RESET_END - ZYNQMP_PM_RESET_START)
 #define ZYNQMP_RESET_ID ZYNQMP_PM_RESET_START
+#define VERSAL_NR_RESETS	95
+
+struct zynqmp_reset_soc_data {
+	u32 reset_id;
+	u32 num_resets;
+};
 
 struct zynqmp_reset_data {
 	struct reset_controller_dev rcdev;
+	const struct zynqmp_reset_soc_data *data;
 };
 
 static inline struct zynqmp_reset_data *
@@ -26,23 +34,28 @@ to_zynqmp_reset_data(struct reset_controller_dev *rcdev)
 static int zynqmp_reset_assert(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
-	return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return zynqmp_pm_reset_assert(priv->data->reset_id + id,
 				      PM_RESET_ACTION_ASSERT);
 }
 
 static int zynqmp_reset_deassert(struct reset_controller_dev *rcdev,
 				 unsigned long id)
 {
-	return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return zynqmp_pm_reset_assert(priv->data->reset_id + id,
 				      PM_RESET_ACTION_RELEASE);
 }
 
 static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
 			       unsigned long id)
 {
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
 	int val, err;
 
-	err = zynqmp_pm_reset_get_status(ZYNQMP_RESET_ID + id, &val);
+	err = zynqmp_pm_reset_get_status(priv->data->reset_id + id, &val);
 	if (err)
 		return err;
 
@@ -52,10 +65,28 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
 static int zynqmp_reset_reset(struct reset_controller_dev *rcdev,
 			      unsigned long id)
 {
-	return zynqmp_pm_reset_assert(ZYNQMP_RESET_ID + id,
+	struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
+
+	return zynqmp_pm_reset_assert(priv->data->reset_id + id,
 				      PM_RESET_ACTION_PULSE);
 }
 
+static int zynqmp_reset_of_xlate(struct reset_controller_dev *rcdev,
+				 const struct of_phandle_args *reset_spec)
+{
+	return reset_spec->args[0];
+}
+
+static const struct zynqmp_reset_soc_data zynqmp_reset_data = {
+	.reset_id = ZYNQMP_RESET_ID,
+	.num_resets = ZYNQMP_NR_RESETS,
+};
+
+static const struct zynqmp_reset_soc_data versal_reset_data = {
+        .reset_id = 0,
+        .num_resets = VERSAL_NR_RESETS,
+};
+
 static const struct reset_control_ops zynqmp_reset_ops = {
 	.reset = zynqmp_reset_reset,
 	.assert = zynqmp_reset_assert,
@@ -71,18 +102,25 @@ static int zynqmp_reset_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
+	priv->data = of_device_get_match_data(&pdev->dev);
+	if (!priv->data)
+		return -EINVAL;
+
 	platform_set_drvdata(pdev, priv);
 
 	priv->rcdev.ops = &zynqmp_reset_ops;
 	priv->rcdev.owner = THIS_MODULE;
 	priv->rcdev.of_node = pdev->dev.of_node;
-	priv->rcdev.nr_resets = ZYNQMP_NR_RESETS;
+	priv->rcdev.nr_resets = priv->data->num_resets;
+	priv->rcdev.of_reset_n_cells = 1;
+	priv->rcdev.of_xlate = zynqmp_reset_of_xlate;
 
 	return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
 }
 
 static const struct of_device_id zynqmp_reset_dt_ids[] = {
-	{ .compatible = "xlnx,zynqmp-reset", },
+	{ .compatible = "xlnx,zynqmp-reset", .data = &zynqmp_reset_data, },
+	{ .compatible = "xlnx,versal-reset", .data = &versal_reset_data, },
 	{ /* sentinel */ },
 };
 

drivers/reset/sti/reset-syscfg.c

@@ -17,7 +17,7 @@
 #include "reset-syscfg.h"
 
 /**
- * Reset channel regmap configuration
+ * struct syscfg_reset_channel - Reset channel regmap configuration
  *
  * @reset: regmap field for the channel's reset bit.
  * @ack: regmap field for the channel's ack bit (optional).
@@ -28,8 +28,9 @@ struct syscfg_reset_channel {
 };
 
 /**
- * A reset controller which groups together a set of related reset bits, which
- * may be located in different system configuration registers.
+ * struct syscfg_reset_controller - A reset controller which groups together
+ * a set of related reset bits, which may be located in different system
+ * configuration registers.
  *
  * @rst: base reset controller structure.
  * @active_low: are the resets in this controller active low, i.e. clearing

include/dt-bindings/reset/imx8mq-reset.h

@@ -58,7 +58,10 @@
 #define IMX8MQ_RESET_DDRC2_PRST			47	/* i.MX8MM/i.MX8MN does NOT support */
 #define IMX8MQ_RESET_DDRC2_CORE_RESET		48	/* i.MX8MM/i.MX8MN does NOT support */
 #define IMX8MQ_RESET_DDRC2_PHY_RESET		49	/* i.MX8MM/i.MX8MN does NOT support */
+#define IMX8MQ_RESET_SW_M4C_RST			50
+#define IMX8MQ_RESET_SW_M4P_RST			51
+#define IMX8MQ_RESET_M4_ENABLE			52
 
-#define IMX8MQ_RESET_NUM			50
+#define IMX8MQ_RESET_NUM			53
 
 #endif

include/dt-bindings/reset/xlnx-versal-resets.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 2020 Xilinx, Inc.
+ */
+
+#ifndef _DT_BINDINGS_VERSAL_RESETS_H
+#define _DT_BINDINGS_VERSAL_RESETS_H
+
+#define VERSAL_RST_PMC_POR			(0xc30c001U)
+#define VERSAL_RST_PMC				(0xc410002U)
+#define VERSAL_RST_PS_POR			(0xc30c003U)
+#define VERSAL_RST_PL_POR			(0xc30c004U)
+#define VERSAL_RST_NOC_POR			(0xc30c005U)
+#define VERSAL_RST_FPD_POR			(0xc30c006U)
+#define VERSAL_RST_ACPU_0_POR			(0xc30c007U)
+#define VERSAL_RST_ACPU_1_POR			(0xc30c008U)
+#define VERSAL_RST_OCM2_POR			(0xc30c009U)
+#define VERSAL_RST_PS_SRST			(0xc41000aU)
+#define VERSAL_RST_PL_SRST			(0xc41000bU)
+#define VERSAL_RST_NOC				(0xc41000cU)
+#define VERSAL_RST_NPI				(0xc41000dU)
+#define VERSAL_RST_SYS_RST_1			(0xc41000eU)
+#define VERSAL_RST_SYS_RST_2			(0xc41000fU)
+#define VERSAL_RST_SYS_RST_3			(0xc410010U)
+#define VERSAL_RST_FPD				(0xc410011U)
+#define VERSAL_RST_PL0				(0xc410012U)
+#define VERSAL_RST_PL1				(0xc410013U)
+#define VERSAL_RST_PL2				(0xc410014U)
+#define VERSAL_RST_PL3				(0xc410015U)
+#define VERSAL_RST_APU				(0xc410016U)
+#define VERSAL_RST_ACPU_0			(0xc410017U)
+#define VERSAL_RST_ACPU_1			(0xc410018U)
+#define VERSAL_RST_ACPU_L2			(0xc410019U)
+#define VERSAL_RST_ACPU_GIC			(0xc41001aU)
+#define VERSAL_RST_RPU_ISLAND			(0xc41001bU)
+#define VERSAL_RST_RPU_AMBA			(0xc41001cU)
+#define VERSAL_RST_R5_0				(0xc41001dU)
+#define VERSAL_RST_R5_1				(0xc41001eU)
+#define VERSAL_RST_SYSMON_PMC_SEQ_RST		(0xc41001fU)
+#define VERSAL_RST_SYSMON_PMC_CFG_RST		(0xc410020U)
+#define VERSAL_RST_SYSMON_FPD_CFG_RST		(0xc410021U)
+#define VERSAL_RST_SYSMON_FPD_SEQ_RST		(0xc410022U)
+#define VERSAL_RST_SYSMON_LPD			(0xc410023U)
+#define VERSAL_RST_PDMA_RST1			(0xc410024U)
+#define VERSAL_RST_PDMA_RST0			(0xc410025U)
+#define VERSAL_RST_ADMA				(0xc410026U)
+#define VERSAL_RST_TIMESTAMP			(0xc410027U)
+#define VERSAL_RST_OCM				(0xc410028U)
+#define VERSAL_RST_OCM2_RST			(0xc410029U)
+#define VERSAL_RST_IPI				(0xc41002aU)
+#define VERSAL_RST_SBI				(0xc41002bU)
+#define VERSAL_RST_LPD				(0xc41002cU)
+#define VERSAL_RST_QSPI				(0xc10402dU)
+#define VERSAL_RST_OSPI				(0xc10402eU)
+#define VERSAL_RST_SDIO_0			(0xc10402fU)
+#define VERSAL_RST_SDIO_1			(0xc104030U)
+#define VERSAL_RST_I2C_PMC			(0xc104031U)
+#define VERSAL_RST_GPIO_PMC			(0xc104032U)
+#define VERSAL_RST_GEM_0			(0xc104033U)
+#define VERSAL_RST_GEM_1			(0xc104034U)
+#define VERSAL_RST_SPARE			(0xc104035U)
+#define VERSAL_RST_USB_0			(0xc104036U)
+#define VERSAL_RST_UART_0			(0xc104037U)
+#define VERSAL_RST_UART_1			(0xc104038U)
+#define VERSAL_RST_SPI_0			(0xc104039U)
+#define VERSAL_RST_SPI_1			(0xc10403aU)
+#define VERSAL_RST_CAN_FD_0			(0xc10403bU)
+#define VERSAL_RST_CAN_FD_1			(0xc10403cU)
+#define VERSAL_RST_I2C_0			(0xc10403dU)
+#define VERSAL_RST_I2C_1			(0xc10403eU)
+#define VERSAL_RST_GPIO_LPD			(0xc10403fU)
+#define VERSAL_RST_TTC_0			(0xc104040U)
+#define VERSAL_RST_TTC_1			(0xc104041U)
+#define VERSAL_RST_TTC_2			(0xc104042U)
+#define VERSAL_RST_TTC_3			(0xc104043U)
+#define VERSAL_RST_SWDT_FPD			(0xc104044U)
+#define VERSAL_RST_SWDT_LPD			(0xc104045U)
+#define VERSAL_RST_USB				(0xc104046U)
+#define VERSAL_RST_DPC				(0xc208047U)
+#define VERSAL_RST_PMCDBG			(0xc208048U)
+#define VERSAL_RST_DBG_TRACE			(0xc208049U)
+#define VERSAL_RST_DBG_FPD			(0xc20804aU)
+#define VERSAL_RST_DBG_TSTMP			(0xc20804bU)
+#define VERSAL_RST_RPU0_DBG			(0xc20804cU)
+#define VERSAL_RST_RPU1_DBG			(0xc20804dU)
+#define VERSAL_RST_HSDP				(0xc20804eU)
+#define VERSAL_RST_DBG_LPD			(0xc20804fU)
+#define VERSAL_RST_CPM_POR			(0xc30c050U)
+#define VERSAL_RST_CPM				(0xc410051U)
+#define VERSAL_RST_CPMDBG			(0xc208052U)
+#define VERSAL_RST_PCIE_CFG			(0xc410053U)
+#define VERSAL_RST_PCIE_CORE0			(0xc410054U)
+#define VERSAL_RST_PCIE_CORE1			(0xc410055U)
+#define VERSAL_RST_PCIE_DMA			(0xc410056U)
+#define VERSAL_RST_CMN				(0xc410057U)
+#define VERSAL_RST_L2_0				(0xc410058U)
+#define VERSAL_RST_L2_1				(0xc410059U)
+#define VERSAL_RST_ADDR_REMAP			(0xc41005aU)
+#define VERSAL_RST_CPI0				(0xc41005bU)
+#define VERSAL_RST_CPI1				(0xc41005cU)
+#define VERSAL_RST_XRAM				(0xc30c05dU)
+#define VERSAL_RST_AIE_ARRAY			(0xc10405eU)
+#define VERSAL_RST_AIE_SHIM			(0xc10405fU)
+
+#endif